home *** CD-ROM | disk | FTP | other *** search
/ World of Shareware - Software Farm 2 / wosw_2.zip / wosw_2 / PRINTING / GREYBAR.ZIP / README.DOC < prev   
Text File  |  1990-11-08  |  1KB  |  38 lines

  1. 11/08/1990        Ver 0.10
  2.  
  3.     LGreyBar & PGreyBar are two programs which download "autoexec"
  4. macros to the Hewlet Packard Laserjet Series III Printer which will 
  5. set up the printer to produce a page similar to that of "greenbar" 
  6. computer paper.  The macro will continue to produce the output on 
  7. all pages printed from the laser until it is reset.  This can be 
  8. accomplished three ways, the laser can be turned off, the reset 
  9. button on the front panel may be pressed, or the software reset 
  10. sequence may be sent to the computer (Escape-E).
  11.     
  12.     These programs currently only send output to the dos printer
  13. PRN: and they set the laser to the following characteristics:
  14.  
  15.     LGreyBar    -    Landscape
  16.                 66 lines x 173 columns
  17.                 Line Printer Font
  18.  
  19.     PGreyBar    -    Portrait
  20.                 66 lines x 96 columns
  21.                 Courier Font
  22.  
  23. Instructions:
  24.     -    Run Program, LGREYBAR or PGREYBAR
  25.     -    Send Output to Printer (I.E. "DIR > PRN:")
  26.     -    Reset Printer, run RESET or press reset button
  27.  
  28.  
  29. NOTE:    If you don't see grey bars on your printout your software is most
  30.     likely sending a reset sequence to the printer.  Most commercial word 
  31.     processing software will do this, try doing "DIR > LPT1:" to test.
  32.     If software is reseting printer you can try to get arround this by
  33.     setting it up for TTY-CRLF or daisy-wheel Printers.
  34.  
  35. NOTE:    This also may work on HP Laserjet series II Printers 
  36.  
  37. Michael S. Davis - 1990
  38.