home *** CD-ROM | disk | FTP | other *** search
/ World of Shareware - Software Farm 2 / wosw_2.zip / wosw_2 / GENERAL / PC_ECAP.ZIP / PC-ECAP.HLP < prev    next >
Text File  |  1990-11-23  |  1KB  |  58 lines

  1. Resistor
  2. RXXXX node1 node2 value (in ohms)
  3.  
  4. Capacitor
  5. CXXXX node1 node2 value (in farads)
  6.  
  7. Inductor
  8. LXXXX node1 node2 value (in henries)
  9.  
  10. Transformer
  11. TXXXX +Pri -Pri +Sec -Sec N (turns ratio np/ns)
  12. Bipolar Transistor
  13. BXXXX Base Emitter Collector Beta Rbe (in ohms)
  14.  
  15. Field Effect Transistor
  16. FXXXX Gate Source Drain Transconductance (in mhos)
  17.  
  18. Opamp
  19. OXXXX +Input -Input Output Gain Rout (in ohms)
  20.  
  21. Transconductance Amplifier
  22. GXXXX +Input -Input +Output -Output  Gm. (in mhos)
  23. Output Format Statement
  24. P In Out Low-Freq. High-Freq. Plot-Mode (LIN or LOG)
  25.  
  26. Element Values
  27.  
  28. Values may be integer, floating point, scientific
  29. notation or either an integer or floating point
  30. number followed by one of these scale factors:
  31.  
  32.    P=1E-12   N=1E-9   U=1E-6   M=1E-3
  33.         K=1E3    MEG=1E6   G=1E9
  34. Node numbers must be integers.  Node 0 is always
  35. reserved for the ground or common connection.  Any
  36. DC power connections should be set to node 0 for
  37. the purpose of AC analysis.
  38.  
  39. Examples:
  40.  
  41. A 1000 ohm resistor connected between nodes 2 and 3
  42. would be described as :
  43.  
  44.             R1 2 3 1000
  45. Examples:
  46.  
  47. A bipolar transistor (NPN or PNP) with the base as
  48. node 3, the emitter as node 1, and the collector as
  49. node 4, having a current gain of 100 and a base-
  50. emitter resistance of 1000 ohms would be described
  51. as follows:
  52.  
  53.                 B 3 1 4 100 1K
  54.  
  55.  
  56.  
  57. 
  58.