home *** CD-ROM | disk | FTP | other *** search
/ The Best of Select: Games 9 / CD_1.iso / kids / slobzone / readme.txt < prev    next >
Text File  |  1994-09-22  |  2KB  |  67 lines

  1. -----------------------------------------------------------------------
  2. Slob Zone 3D Readme File
  3. 9/22/94
  4. -----------------------------------------------------------------------
  5. This file contains the following topics about Slob Zone 3D:
  6.  
  7. 1) Requirements
  8. 2) Installation Instructions
  9. 3) Trouble Shooting
  10. -----------------------------------------------------------------------
  11. 1) REQUIREMENTS
  12.  
  13.       386/33 or greater IBM PC compatible
  14.       VGA graphics card
  15.       500K free base memory
  16.       4 Mb of free memory ( will not work with Emm386 loaded )
  17.       CD-ROM drive
  18.       Sound Card ( optional )
  19.  
  20. -----------------------------------------------------------------------
  21. 2) INSTALLATION INSTRUCTIONS:
  22.  
  23.    Remove Emm386 or Qemm386 from your CONFIG.SYS file before running
  24.    Slob Zone 3D.
  25.  
  26.    Type the letter of your cd drive.
  27.       d:<enter>
  28.  
  29.    Type install to run the installation program.
  30.       install<enter>
  31.  
  32.    You will be asked to select and test a sound card and music device.
  33.    After this your configuration has been saved to your C: drive for
  34.    future use by the game.
  35.  
  36.    To run the game type slob.
  37.       slob<enter>
  38.  
  39. -----------------------------------------------------------------------
  40. 3) TROUBLE SHOOTING
  41.  
  42.    NOT ENOUGHT MEMORY!
  43.    While you mave have the 4Mb needed to run the game is it actually free?
  44.    Some programs like SMARTDRV.EXE can take 2Mb or more.  Remove it from
  45.    you config.sys and reboot.
  46.  
  47.    MS DOS 6.0 contains MEMMAKER which can help you configure your system
  48.    better.
  49.  
  50.  
  51.    HEY, IT CRASHED!
  52.    Did you remember to remove Emm386 or Qemm386 from your CONFIG.SYS file
  53.    before running Slob Zone 3D? Boot with a minimum configuration that does
  54.    not include Emm386.  Your config file should look something like this:
  55.       FILES=20
  56.       BUFFERS=20
  57.       DEVICE=C:\DOS\HIMEM.SYS
  58.       DOS=HIGH
  59.  
  60.  
  61.    THE SOUND DOESN'T WORK!
  62.    If you have a SoundBlaster compatable card select the SoundBlaster
  63.    clone driver and try again.  Otherwise you can run Slob Zone without
  64.    sound by starting it as follows:
  65.       slob -s<enter>
  66.  
  67.