10001 Setup is not complete. If you quit the Setup program now, the program will not be installed.\n\nYou can run the Setup program at a later time to complete the installation.\n\n
10002 To continue installing the program, click Resume. To quit the Setup program, click Exit Setup.
10003 Enter your serial number to activate the %s. Click Next to continue.\n\n
10004 Serialize %s
10005 To evaluate JSB's %s click Next to continue.\n\n
10006 &Serial Number:
10007 &Activation key:
10008 Welcome to %s Setup program
10009 Welcome to %s Setup program.
10010 This program will install %s on your system.\n\n\nIt is strongly recomended that you exit all Windows programs before running this Setup program.
10011 Click Cancel to quit Setup and then close any programs you have running. Click Next to continue with the Setup program.\n\n\n\nWARNING this program is protected by copyright law and international treatied.
10012 \n\nUnauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law.
10013 %s Setup Components
10014 To add or remove a component, click the check box. Click Display Key, to see a summary of the check box values.
10015 Click Details, to see exactly what is included in a component.
10016 Includes the Terminal Emulator's supported.
10017 %scomponents selected
10018 Space needed by Setup:
10019 Space available on disk:
10020 %s M
10021 %s M
10022 %s
10023 Includes various utilities to enhance %s.
10024 Includes additional Fonts.
10025 Includes Help files for an online guide to using %s.
10026 Includes Wizards, allowing simple configuration to %s.
10027 %s Setup Type
10028 Click the type of Setup you prefer, then click Next.
10029 &Complete
10030 C&ompact
10031 C&ustom
10032 Program will be installed with the most common options. Recommended for most users.
10033 Program will be installed with minimum required options.
10034 You can choose the options you want to install. Recomended for advanced users.
10035 Destination Directory
10036 %s
10037 %s Disk Space
10038 There is not enougth free disk space available on the destination drive to install %s.\n\n
10039 To Continue installing %s click Continue and then either select the Custom Setup type so that you can reduce the amount of disk space required, or free some disk space to make room for your chosen requirements.
10040 Click Cancel to Exit %s.
10041 Disk space information
10042 Configure %s
10043 You have succesfully installed %s on your PC.
10044 The following dialogs are used to configure %s.\n\n
10045 The dialogs ask you to specify your personal preferences, and default information so that %s will perform better for you.\n\nClick Next to continue.
10046 %s Remote System
10047 Enter the name of the remote system you normally use on your network.\n\nThis value will be used as the default remote system. You can configure additional remote systems at any time after %s has been installed.\n\n
10048 Click Next to continue.
10049 &Remote System:
10050 %s Login Name
10051 Enter your login name.\n\nThis name will be used as your default login. You can configure additional user names at any time after %s has been installed.\n\nClick Next to continue.
10052 &Login Name:
10053 %s Default Terminal Emulator
10054 Select the terminal emulator you prefer to use. This will be used as your default terminal emulator. You can change the default terminal emulator at any time after %s has been installed.\n\nClick Next to continue.
10055 &Default Terminal Emulator:
10056 Welcome to %s Network Setup program.
10057 This program will install %s program files on your Network.\n\n\nIt is strongly recomended that you exit all Windows programs before running this Setup program.
10058 A demonstration installation has been found.\n\nDo you wish to update your product serial number?
10059 %s Setup
10060 %s has been installed on your Network.
10061 To install %s you must free some disk space and run the Silent Setup again. Alternatively you can run Setup in Normal mode rather than Silent mode and chose less options.
10062 Setup Complete
10063 Setup has finished installing %s on your computer.\n\nThis product is under exciting major development in the coming months.
10064 You are required to enter any default values for this version of %s.\n\nClick Next to continue.
10065 JSB Remote Printer Port
10066 Windows NT x86
10067 Windows x86
10068 DEC VT100 terminal emulator.
10069 Terminal Emulator online help.
10070 Remote Print Server online help.
10071 File Transfer online help.
10072 SCO UNIX console.
10073 Include File Transfer which allows you to copy files between your PC and remote systems using the FTP protocol.
10074 Includes Remote Printing support for LPR/LPD.
10075 A utility which directs remote print requests to a printer that is connected to a local PC or Network, using the LPD protocol.
10076 A utility which directs local print requests to a printer that is connected to a Remote system, using the LPR protocol.
10077 This is an Evaluation copy of %s which expires on the 31st of January 1996.\n\n
10078 Click Next to continue.
10079 Includes the support required by your Terminal Emulator's for the commonly used communication protocols.
10080 Supports IPX/SPX NVT protocol.
10081 Supports TCP/IP REXEC protocol.
10082 Supports TCP/IP RLOGIN protocol.
10083 Supports TCP/IP RSH protocol.
10084 Supports SERIAL protocol.
10085 Supports TCP/IP TELNET protocol.
10086 Select the communication protocol you prefer to use. This will be used as your default protocol. You can change the default protocol at any time after %s has been installed.\n\nClick Next to continue.
10087 &Default Protocol:
10088 %s Default Protocol
10089 Technical reference for system administrators.
10090 Includes Ping which allows you to check the availability of remote systems over a variety of protocols.
10091 DEC VT220 terminal emulator.
10092 Includes The Kiosk which allows you to customise your desktop to suit your environment.
10093 Your program folder %s, contains an icon for each of the samples. Click one of these to see it in operation.\n\nThe program folder also allows you to edit the samples so you can build your own environment.
10094 Working samples for The Intranet Client - The Kiosk
10095 There are a number of samples included with this product which show some of the different ways you can visualise application launch using The Kiosk.\n\n
10096 The topics appear in each of the samples. Choose an appropriate application for each topic , e.g. Calculator would be c:\windows\calc.exe. If you do not use a valid application then The Kiosk hot link will fail.
10097 Using the Samples
10098 Includes INTRAnet Jazz Mosaic, a Web browser.
10099 Includes Server.
10100 The INTRAnet Server
10101 Included with this product are the INTRAnet Server components which consists of\n\n A Web Server.\n A character Web Browser.\n\n
10102 For further information regarding the Server Components please click on the Info button.\n\nClick Next to Continue.
10103 To ensure you are kept up to date please access our WWW site at www.intranet.co.uk\n\nWe welcome your comments and input. Please do not hesitate to send these via email to intranet@jsb.co.uk.
10104 All program components will be installed.
10105 Install the Client.
10106 All Client components will be installed.
10107 Install the Client.
10108 The Kiosk component will be installed. An evaluation copy of the other Client components will be installed.
10109 Install The Kiosk.
10110 Multi Ping online help.
10111 Remote Print Client online help.
10112 %s Setup Components - Key
10113 Customise/Serialise %s
10114 \n\nSelect either Customise, or Serialise and click Next to Continue.
10115 Customise allows you to install new components, or update the components you have already installed with a new version. \n\nSerialise allows you to activate components you have installed.
10116 Includes INTRAnet Jazz Organiser. The flexible "All-in-one" user interface, providing Web Briefcase functionality which is essential for mobile users.
10117 Includes INTRAnet Jazz Mail. Advanced Email including context rich compound documents and compression reducing network burden.
10118 Organiser online help.
10119 Mail online help.
10120 Includes Tools.
10121 Helps you create and edit World Wide Web image maps. This is useful for creating Kiosk user environments.
10122 JSB Jazz Screen Saver.
10123 JSB Jazz Network enabled Screen Saver. Allows you you to send a post-it style "Message of the day" to all your network users.
10124 Mail Personal Details
10125 &EMail Address:
10126 &Full Name:
10127 Enter your full name and email address to be used with the mail client.\n\nClick Next to continue.
10128 Mail Servers
10129 Enter your mail server name details and account name.\n\nClick Next to continue.
