home *** CD-ROM | disk | FTP | other *** search
Text File | 1996-03-03 | 209.6 KB | 6,724 lines |
-
-
-
-
-
-
- Network Working Group W. McKenzie
- Request for Comments: 1593 J. Cheng
- Category: Informational IBM Networking Systems
- March 1994
-
-
- SNA APPN Node MIB
-
- Status of this Memo
-
- This memo provides information for the Internet community. This memo
- does not specify an Internet standard of any kind. Distribution of
- this memo is unlimited.
-
- Abstract
-
- This RFC describes IBM's SNMP support for SNA Advanced Peer-to-Peer
- Networking (APPN) nodes.
-
- Table of Contents
-
- 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
- 2.0 Definitions . . . . . . . . . . . . . . . . . . . . . . . . 3
- 2.1 APPN Node Group . . . . . . . . . . . . . . . . . . . . . . 3
- 2.1.1 APPN Node General Information . . . . . . . . . . . . . 4
- 2.1.2 APPN Network Node Information . . . . . . . . . . . . . 6
- 2.1.3 APPN End Node Information . . . . . . . . . . . . . . . 8
- 2.1.4 APPN Port Information . . . . . . . . . . . . . . . . 10
- 2.1.4.1 General Port Information . . . . . . . . . . . . . 10
- 2.1.4.2 TCP/IP Port Information . . . . . . . . . . . . . 14
- 2.1.4.3 Data Link Switch Port Information . . . . . . . . 15
- 2.1.4.4 Token Ring Port Information . . . . . . . . . . . 16
- 2.1.4.5 Port DLC Trace Information . . . . . . . . . . . . 17
- 2.1.5 APPN Link Station Information . . . . . . . . . . . . 23
- 2.1.5.1 General Link Station Information . . . . . . . . . 23
- 2.1.5.2 TCP/IP Link Station Information . . . . . . . . . 35
- 2.1.5.3 Data Link Switch Link Station Information . . . . 37
- 2.1.5.4 Token Ring Link Station Information . . . . . . . 39
- 2.1.5.5 Link Station Status Information . . . . . . . . . 41
- 2.1.6 SNMP Performance Information for APPN Subagent . . . . 46
- 2.1.7 Performance Information for APPN Node . . . . . . . . 49
- 2.1.8 XID Statistics . . . . . . . . . . . . . . . . . . . . 50
- 2.2 APPN Topology Group . . . . . . . . . . . . . . . . . . . 51
- 2.2.1 Topology Performance Information . . . . . . . . . . . 52
- 2.2.1.1 Topology Route Information . . . . . . . . . . . . 58
- 2.2.2 Adjacent Node Table . . . . . . . . . . . . . . . . . 60
- 2.2.3 Network Node Topology . . . . . . . . . . . . . . . . 62
- 2.2.3.1 NN Topology Table (Indexed by Node Name) . . . . . 62
-
-
-
- McKenzie & Cheng [Page 1]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- 2.2.3.2 NN TG Table (Indexed by Node Names and TG Number) 66
- 2.2.3.3 NN Topology Table (Indexed by FRSN and Node Name) 73
- 2.2.3.4 NN TG Table (Indexed by FRSN, Node Names, and TG
- Number) . . . . . . . . . . . . . . . . . . . . . 77
- 2.3 APPN Node Local Topology Group . . . . . . . . . . . . . . 83
- 2.3.1 Local Topology This Node . . . . . . . . . . . . . . . 84
- 2.3.1.1 Local General Information . . . . . . . . . . . . 84
- 2.3.1.2 Local NN Specific Information . . . . . . . . . . 85
- 2.3.1.3 Local TG Information . . . . . . . . . . . . . . . 87
- 2.3.2 Client End Nodes Topology Known to Serving NN . . . . 93
- 2.3.2.1 Client End Nodes Information . . . . . . . . . . . 93
- 2.3.2.2 Client End Nodes TG Information (Tail Vectors) . . 94
- 2.4 APPN Directory Group . . . . . . . . . . . . . . . . . . . 99
- 2.4.1 Directory Performance Information . . . . . . . . . . 99
- 2.4.2 Directory Cache Table . . . . . . . . . . . . . . . . 102
- 2.5 APPN Class Of Service Group . . . . . . . . . . . . . . . 105
- 2.5.1 COS Mode Table . . . . . . . . . . . . . . . . . . . . 108
- 2.5.2 COS Name Table . . . . . . . . . . . . . . . . . . . . 109
- 2.5.3 COS Node Row Table . . . . . . . . . . . . . . . . . . 110
- 2.5.4 COS TG Row Table . . . . . . . . . . . . . . . . . . . 113
- 3.0 Acknowledgements . . . . . . . . . . . . . . . . . . . . . 119
- 4.0 Security Considerations . . . . . . . . . . . . . . . . . . 119
- 5.0 Authors' Addresses . . . . . . . . . . . . . . . . . . . . 120
-
- 1.0 Introduction
-
- This module contains managed objects which describe the following:
-
- o The APPN node (either an APPN network node or an APPN end node)
-
- o The connections of the node to other SNA nodes
-
- o The APPN network topology (as reflected in the network topology
- database that is replicated in each APPN network node.
-
- This module does not describe the SNA logical units (LUs) served by
- the APPN node nor does it describe the sessions between LUs. Managed
- objects for that information are under development.
-
-
-
-
-
-
-
-
-
-
-
-
-
- McKenzie & Cheng [Page 2]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- 2.0 Definitions
-
- IBM-6611-APPN-MIB DEFINITIONS ::= BEGIN
-
- IMPORTS
-
- enterprises, Counter, IpAddress,
- Gauge, TimeTicks
- FROM RFC1155-SMI
-
- DisplayString
- FROM RFC1213-MIB
-
- OBJECT-TYPE
- FROM RFC-1212;
-
-
-
- -- ******************************************************************
- ibm OBJECT IDENTIFIER ::= { enterprises 2 }
- ibmProd OBJECT IDENTIFIER ::= { ibm 6 }
- ibm6611 OBJECT IDENTIFIER ::= { ibmProd 2 }
- ibmappn OBJECT IDENTIFIER ::= { ibm6611 13 }
-
- -- ******************** The APPN Node Group *********************
-
- ibmappnNode OBJECT IDENTIFIER ::= { ibmappn 1 }
- ibmappnGeneralInfoAndCaps OBJECT IDENTIFIER ::= { ibmappnNode 1 }
- ibmappnNnUniqueInfoAndCaps OBJECT IDENTIFIER ::= { ibmappnNode 2 }
- ibmappnEnUniqueCaps OBJECT IDENTIFIER ::= { ibmappnNode 3 }
- ibmappnPortInformation OBJECT IDENTIFIER ::= { ibmappnNode 4 }
- ibmappnLinkStationInformation OBJECT IDENTIFIER ::= { ibmappnNode 5 }
- ibmappnSnmpInformation OBJECT IDENTIFIER ::= { ibmappnNode 6 }
- ibmappnMemoryUse OBJECT IDENTIFIER ::= { ibmappnNode 7 }
- ibmappnXidInformation OBJECT IDENTIFIER ::= { ibmappnNode 8 }
-
- -- This group provides global information about the
- -- APPN node, which is either a network node or an end node.
-
-
- -- The first section applies to all APPN nodes.
- -- The second section applies only to network nodes.
- -- The third section applies only to end nodes.
- -- The fourth section applies to Port information.
- -- The fifth section applies to SNA link station Information.
- -- The sixth section applies to SNMP traffic for this APPN sub-agent
- -- The seventh section applies to APPN memory usage.
- -- The eighth section applies to XID activities.
-
-
-
- McKenzie & Cheng [Page 3]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- APPN General Information
- -- This section applies to both network and end nodes.
-
-
- ibmappnNodeCpName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned network name
- for this node in the format NETID.CPNAME."
-
- ::= { ibmappnGeneralInfoAndCaps 1 }
-
- ibmappnNodeNetid OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned APPN network identification,
- which can be from one to eight characters.
- This ID is used with the control point name
- to create a fully-qualified control point name."
-
- ::= { ibmappnGeneralInfoAndCaps 2 }
-
- ibmappnNodeBlockNum OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The block number is the first three digits of the node_id.
- These 3 hexadecimal digits identify the product and are not
- configurable."
-
- ::= { ibmappnGeneralInfoAndCaps 3 }
-
- ibmappnNodeIdNum OBJECT-TYPE
- SYNTAX DisplayString (SIZE (5))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The ID number is the last 5 digits of the node_id.
- These 5 hexadecimal digits are administratively defined and
- combined with the 3 digit block number form the node_id.
- This node_id is used to identify the local node and is
- include in APPN alerts as well as being included in XIDs.
- A unique value is required for connections to SNA
-
-
-
- McKenzie & Cheng [Page 4]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- sub-area."
-
- ::= { ibmappnGeneralInfoAndCaps 4 }
-
- ibmappnNodeType OBJECT-TYPE
- SYNTAX INTEGER {
- networkNode(1),
- endNode(2),
- len(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Type of APPN node, either network, len, or end node."
-
- ::= { ibmappnGeneralInfoAndCaps 5 }
-
- ibmappnNodeUpTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Time (in hundredths of a second) since this APPN node
- was initialized."
-
- ::= { ibmappnGeneralInfoAndCaps 6 }
-
- ibmappnNodeNegotLs OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports negotiable
- link stations."
-
- ::= { ibmappnGeneralInfoAndCaps 7 }
-
- ibmappnNodeSegReasm OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports segment
- reassembly. This is only supported when
- segment generation is also supported."
-
- ::= { ibmappnGeneralInfoAndCaps 8 }
-
-
-
-
- McKenzie & Cheng [Page 5]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNodeBindReasm OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports Bind segment
- reassembly. This will only be supported when Bind
- segment generation is also supported."
-
- ::= { ibmappnGeneralInfoAndCaps 9 }
-
- ibmappnNodeParallelTg OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports parallel TGs."
-
- ::= { ibmappnGeneralInfoAndCaps 10 }
-
- ibmappnNodeService OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node allows call-in from nodes not
- defined locally."
-
- ::= { ibmappnGeneralInfoAndCaps 11 }
-
- ibmappnNodeAdaptiveBindPacing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports adaptive bind pacing."
-
- ::= { ibmappnGeneralInfoAndCaps 12 }
-
-
-
- -- **************************************************************
- -- APPN Network Node Information
- -- This section provides global information about the
- -- APPN network node.
-
- ibmappnNodeNnRcvRegChar OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
-
-
-
- McKenzie & Cheng [Page 6]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports receiving registered
- characteristics."
-
- ::= { ibmappnNnUniqueInfoAndCaps 1 }
-
- ibmappnNodeNnGateway OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this is a gateway node."
-
- ::= { ibmappnNnUniqueInfoAndCaps 2 }
-
- ibmappnNodeNnCentralDirectory OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports central directory
- cache."
-
- ::= { ibmappnNnUniqueInfoAndCaps 3 }
-
- ibmappnNodeNnTreeCache OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports route tree cache."
-
- ::= { ibmappnNnUniqueInfoAndCaps 4 }
-
- ibmappnNodeNnTreeUpdate OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports
- incremental_tree_update, which is only
- supported when tree caching is supported."
-
- ::= { ibmappnNnUniqueInfoAndCaps 5 }
-
- ibmappnNodeNnRouteAddResist OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 7]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Route addition resistance is a value that
- indicates the relative desirability
- of using this node for intermediate session traffic.
- The value, which can be any integer 0-255,
- is used in route computation. The lower the value,
- the more desirable the node is for intermediate routing."
-
- ::= { ibmappnNnUniqueInfoAndCaps 6 }
-
- ibmappnNodeNnIsr OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports intermediate
- session routing."
-
- ::= { ibmappnNnUniqueInfoAndCaps 7 }
-
- ibmappnNodeNnFrsn OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This object
- is the last FRSN sent in a topology update to
- adjacent network nodes."
-
- ::= { ibmappnNnUniqueInfoAndCaps 8 }
-
-
- -- **************************************************************
- -- APPN End Node Information
-
- ibmappnNodeEnSegGen OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this end node supports segment generation."
-
-
-
-
- McKenzie & Cheng [Page 8]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnEnUniqueCaps 1 }
-
- ibmappnNodeEnModeCosMap OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this end node supports
- mode name to COS name mapping."
-
- ::= { ibmappnEnUniqueCaps 2 }
-
- ibmappnNodeEnLocateCdinit OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this end node supports Locate Cdinit."
-
- ::= { ibmappnEnUniqueCaps 3 }
-
- ibmappnNodeEnSendRegNames OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node will register its LUs with the
- adjacent serving network node:
-
- NO - do not register names
- YES - register names"
-
- ::= { ibmappnEnUniqueCaps 4 }
-
- ibmappnNodeEnSendRegChar OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node supports
- send register characteristics, which is only
- supported when send registered names is also
- supported."
-
- ::= { ibmappnEnUniqueCaps 5 }
-
-
-
-
-
-
- McKenzie & Cheng [Page 9]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- **************************************************************
- -- APPN Port information
- --
-
-
- ibmappnNodePortTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodePortEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Port table describes the configuration and current
- status of the ports used by APPN. The type of DLC is
- included in this table as a pointer to the DLC port
- specific tables."
-
- ::= { ibmappnPortInformation 1 }
-
- ibmappnNodePortEntry OBJECT-TYPE
- SYNTAX IbmappnNodePortEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Port Name is used as the index to this table."
-
- INDEX
- { ibmappnNodePortName }
-
- ::= { ibmappnNodePortTable 1 }
-
- IbmappnNodePortEntry ::= SEQUENCE {
- ibmappnNodePortName DisplayString,
- ibmappnNodePortState INTEGER,
-
- ibmappnNodePortDlcType INTEGER,
- ibmappnNodePortPortType INTEGER,
- ibmappnNodePortSIMRIM INTEGER,
- ibmappnNodePortLsRole INTEGER,
- ibmappnNodePortMaxRcvBtuSize INTEGER,
- ibmappnNodePortMaxIframeWindow INTEGER,
- ibmappnNodePortDefLsGoodXids Counter,
- ibmappnNodePortDefLsBadXids Counter,
- ibmappnNodePortDynLsGoodXids Counter,
- ibmappnNodePortDynLsBadXids Counter,
- ibmappnNodePortSpecific OBJECT IDENTIFIER
- }
-
-
- ibmappnNodePortName OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 10]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this APPN port.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodePortEntry 1 }
-
- ibmappnNodePortState OBJECT-TYPE
- SYNTAX INTEGER {
- inactive(1),
- pendactive(2),
- active(3),
- pendinact(4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Indicates the current state of this port."
-
- ::= { ibmappnNodePortEntry 2 }
-
- ibmappnNodePortDlcType OBJECT-TYPE
- SYNTAX INTEGER {
- other(1), -- none of the following
- sdlc(2),
- dls(3),
- socket(4),
- ethernet(5),
- tokenRing(6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of DLC interface, distinguished according
- to the protocol immediately 'below' this layer."
-
- ::= { ibmappnNodePortEntry 3 }
-
- ibmappnNodePortPortType OBJECT-TYPE
- SYNTAX INTEGER {
- leased(1),
- switched(2),
- sharedAccessFacilities(3)
- }
- ACCESS read-only
- STATUS mandatory
-
-
-
- McKenzie & Cheng [Page 11]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- DESCRIPTION
- "Identifies the type of line used by this port."
-
- ::= { ibmappnNodePortEntry 4 }
-
- ibmappnNodePortSIMRIM OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether Set Initialization Mode (SIM) and
- Receive Initialization Mode (RIM) are supported."
-
- ::= { ibmappnNodePortEntry 5 }
-
- ibmappnNodePortLsRole OBJECT-TYPE
- SYNTAX INTEGER {
- primary(1),
- secondary(2),
- negotiable(3),
- abm(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Initial role for LSs activated through this port,
- where 'abm' indicates asynchronous balance mode."
-
- ::= { ibmappnNodePortEntry 6 }
-
- ibmappnNodePortMaxRcvBtuSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum Basic Transmission Size (BTU) that a
- link station on this port can receive."
-
- ::= { ibmappnNodePortEntry 7 }
-
- ibmappnNodePortMaxIframeWindow OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum number of I-frames that can be received
- by the XID sender before an acknowledgement is received."
-
-
-
-
- McKenzie & Cheng [Page 12]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodePortEntry 8 }
-
- ibmappnNodePortDefLsGoodXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of successfull XIDs that have occurred
- on all defined link stations on this port since the last
- time this port was started."
-
- ::= { ibmappnNodePortEntry 9 }
-
- ibmappnNodePortDefLsBadXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of unsuccessfull XIDs that have occurred
- on all defined link stations on this port since the last
- time this port was started."
-
- ::= { ibmappnNodePortEntry 10 }
-
- ibmappnNodePortDynLsGoodXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of successfull XIDs that have occurred
- on all dynamic link stations on this port since the last
- time this port was started."
-
- ::= { ibmappnNodePortEntry 11 }
-
- ibmappnNodePortDynLsBadXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of unsuccessfull XIDs that have occurred
- on all dynamic link stations on this port since the last
- time this port was started."
-
- ::= { ibmappnNodePortEntry 12 }
-
- ibmappnNodePortSpecific OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
-
-
-
- McKenzie & Cheng [Page 13]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Identifies the port specific OBJECT IDENTIFIER
- that can provide additional information."
-
- ::= { ibmappnNodePortEntry 13 }
-
-
-
- -- **************************************************************
- --
- --
-
- ibmappnNodePortIpTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodePortIpEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Port table (TCP/IP specific)."
-
- ::= { ibmappnPortInformation 2 }
-
- ibmappnNodePortIpEntry OBJECT-TYPE
- SYNTAX IbmappnNodePortIpEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The IP Name is used as the index to this table."
-
- INDEX
- {ibmappnNodePortIpName }
-
- ::= { ibmappnNodePortIpTable 1 }
-
- IbmappnNodePortIpEntry ::= SEQUENCE {
- ibmappnNodePortIpName DisplayString,
- ibmappnNodePortIpPortNum INTEGER
- }
-
- ibmappnNodePortIpName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this APPN port.
- The name can be from one to eight characters."
-
-
-
-
- McKenzie & Cheng [Page 14]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodePortIpEntry 1 }
-
- ibmappnNodePortIpPortNum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local TCP/IP port number."
-
- ::= { ibmappnNodePortIpEntry 2 }
-
-
-
- -- **************************************************************
- --
- --
-
- ibmappnNodePortDlsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodePortDlsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Port table (DLS specific)."
-
- ::= { ibmappnPortInformation 3 }
-
- ibmappnNodePortDlsEntry OBJECT-TYPE
- SYNTAX IbmappnNodePortDlsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The DLS Name is used as the index to this table."
-
- INDEX
- {ibmappnNodePortDlsName }
-
- ::= { ibmappnNodePortDlsTable 1 }
-
- IbmappnNodePortDlsEntry ::= SEQUENCE {
- ibmappnNodePortDlsName DisplayString,
- ibmappnNodePortDlsMac OCTET STRING,
- ibmappnNodePortDlsSap OCTET STRING
- }
-
- ibmappnNodePortDlsName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
-
-
-
- McKenzie & Cheng [Page 15]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- DESCRIPTION
- "Administratively-assigned name for this APPN DLS port.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodePortDlsEntry 1 }
-
- ibmappnNodePortDlsMac OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (6))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local DLS MAC address."
-
- ::= { ibmappnNodePortDlsEntry 2 }
-
- ibmappnNodePortDlsSap OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local DLS Sap address."
-
- ::= { ibmappnNodePortDlsEntry 3 }
-
-
-
- -- **************************************************************
- --
- --
-
- ibmappnNodePortTrTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodePortTrEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Port table (Token Ring specific)."
-
- ::= { ibmappnPortInformation 4 }
-
- ibmappnNodePortTrEntry OBJECT-TYPE
- SYNTAX IbmappnNodePortTrEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The TR Name is used as the index to this table."
-
- INDEX
- {ibmappnNodePortTrName }
-
-
-
- McKenzie & Cheng [Page 16]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodePortTrTable 1 }
-
- IbmappnNodePortTrEntry ::= SEQUENCE {
- ibmappnNodePortTrName DisplayString,
- ibmappnNodePortTrMac OCTET STRING,
- ibmappnNodePortTrSap OCTET STRING
- }
-
- ibmappnNodePortTrName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this APPN port.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodePortTrEntry 1 }
-
- ibmappnNodePortTrMac OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (6))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local Token Ring MAC address."
-
- ::= { ibmappnNodePortTrEntry 2 }
-
- ibmappnNodePortTrSap OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local Token Ring Sap address."
-
- ::= { ibmappnNodePortTrEntry 3 }
-
-
- -- **************************************************************
- -- APPN generic DLC Trace
- --
-
- ibmappnNodePortDlcTraceTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodePortDlcTraceEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Port table generic DLC trace table."
-
-
-
-
- McKenzie & Cheng [Page 17]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnPortInformation 5 }
-
- ibmappnNodePortDlcTraceEntry OBJECT-TYPE
- SYNTAX IbmappnNodePortDlcTraceEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Port name and a dynamic integer are the index to
- this table."
-
- INDEX
- {ibmappnNodePortDlcTracPortName,
- ibmappnNodePortDlcTracIndex}
-
- ::= { ibmappnNodePortDlcTraceTable 1 }
-
- IbmappnNodePortDlcTraceEntry ::= SEQUENCE {
- ibmappnNodePortDlcTracPortName DisplayString,
- ibmappnNodePortDlcTracIndex INTEGER,
- ibmappnNodePortDlcTracDlcType INTEGER,
- ibmappnNodePortDlcTracLocalAddr DisplayString,
- ibmappnNodePortDlcTracRemoteAddr DisplayString,
- ibmappnNodePortDlcTracMsgType INTEGER,
- ibmappnNodePortDlcTracCmdType INTEGER,
- ibmappnNodePortDlcTracUseWan INTEGER
- }
-
- ibmappnNodePortDlcTracPortName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Port name associated with this this trace table entry."
-
- ::= { ibmappnNodePortDlcTraceEntry 1 }
-
- ibmappnNodePortDlcTracIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This index value is updated every time a new trace entry
- is created which provides a means to retrieve only the
- updated entries and also provides a simple method of
- correlating the entries. The table will wrap when the
- table is full, which will result in previous entries
- being written over. The mangement station can over
- come this by retrieving the table using this index to
-
-
-
- McKenzie & Cheng [Page 18]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- retrieve only the new table entries."
-
- ::= { ibmappnNodePortDlcTraceEntry 2 }
-
- ibmappnNodePortDlcTracDlcType OBJECT-TYPE
- SYNTAX INTEGER {
- other(1), -- none of the following
- sdlc(2),
- dls(3),
- socket(4),
- ethernet(5),
- tokenRing(6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of DLC interface, distinguished according
- to the protocol immediately 'below' this layer."
-
- ::= { ibmappnNodePortDlcTraceEntry 3 }
-
- ibmappnNodePortDlcTracLocalAddr OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local address in format described below:
-
- other = free form DisplayString
- ip = ld. ld. ld. ld / 2d
- tr = lx: lx: lx: lx: lx: lx . lx
- dlsw = lx: lx: lx: lx: lx: lx . lx
- ethernet = lx: lx: lx: lx: lx: lx . lx
- "
-
- ::= { ibmappnNodePortDlcTraceEntry 4 }
-
-
- ibmappnNodePortDlcTracRemoteAddr OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote Address in the format described below:
- other = free form DisplayString
- ip = ld. ld. ld. ld / 2d
- tr = lx: lx: lx: lx: lx: lx . lx
- dlsw = lx: lx: lx: lx: lx: lx . lx
-
-
-
- McKenzie & Cheng [Page 19]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ethernet = lx: lx: lx: lx: lx: lx . lx
- "
-
- ::= { ibmappnNodePortDlcTraceEntry 5 }
-
-
- ibmappnNodePortDlcTracMsgType OBJECT-TYPE
- SYNTAX INTEGER {
- -- enumeration values between 1 and 1999 are reserved
- -- for potential undefined message types.
- other(1),
- unknown(2),
- request(3),
- confirm(4),
- indication(5),
- response(6)
-
- -- enumeration values between 2000 and 3999 are reserved
- -- for IP socket traces,
-
-
-
- -- enumeration values between 4000 and 5999 are reserved
- -- for DLS traces,
-
-
-
- -- enumeration values between 6000 and 7999 are reserved
- -- for TR traces,
-
-
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the type of trace record entry"
-
- ::= { ibmappnNodePortDlcTraceEntry 6 }
-
- ibmappnNodePortDlcTracCmdType OBJECT-TYPE
- SYNTAX INTEGER {
- -- enumeration values between 1 and 1999 are reserved
- -- for potential undefined message types.
-
- testFrame(1),
- respFrame(2),
- curFrame(3),
- icrFrame(4),
-
-
-
- McKenzie & Cheng [Page 20]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- respAck(5),
- dgrmFrame(6),
- xidFrame(7),
- contFrame(8),
- contedFrame(9),
- iFrame(10),
- enterBusy(12),
- exitBusy(13),
- haltFrame(14),
- lsHalted(15),
- restartLs(16),
- lsRestarted(17),
- netBioSnq(18),
- netBioSnr(19),
- gnetFrame(20),
- netdFrame(21),
- oobFrame(22),
- alterSap(23),
- testRsp(24),
- haltLsNow(25),
- testReq(26),
-
- -- enumeration values between 2000 and 3999 are reserved
- -- for IP socket traces.
- ipTestFrame(2001),
- ipRespFrame(2002),
- ipCurFrame(2003),
- ipIcrFrame(2004),
- ipRespAck(2005),
- ipDgrmFrame(2006),
- ipXidFrame(2007),
- ipContFrame(2008),
- ipContedFrame(2009),
- ipIFrame(2010),
- ipEnterBusy(2012),
- ipExitBusy(2013),
- ipHaltFrame(2014),
- ipLsHalted(2015),
- ipRestartLs(2016),
- ipLsRestarted(2017),
- ipNetBioSnq(2018),
- ipNetBioSnr(2019),
- ipGnetFrame(2020),
- ipNetdFrame(2021),
- ipOobFrame(2022),
- ipAlterSap(2023),
- ipTestRsp(2024),
- ipHaltLsNow(2025),
-
-
-
- McKenzie & Cheng [Page 21]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ipTestReq(2026),
-
- -- enumeration values between 4000 and 5999 are reserved
- -- for DLS traces.
-
- dlsIpm(4124),
-
- -- enumeration values between 6000 and 7999 are reserved for
- -- TR traces.
- trTestFrame(6001),
- trRespFrame(6002),
- trCurFrame(6003),
- trIcrFrame(6004),
- trRespAck(6005),
- trDgrmFrame(6006),
- trXidFrame(6007),
- trContFrame(6008),
- trContedFrame(6009),
- trIFrame(6010),
- trEnterBusy(6012),
- trExitBusy(6013),
- trHaltFrame(6014),
- trLsHalted(6015),
- trRestartLs(6016),
- trLsRestarted(6017),
- trNetBioSnq(6018),
- trNetBioSnr(6019),
- trGnetFrame(6020),
- trNetdFrame(6021),
- trOobFrame(6022),
- trAlterSap(6023),
- trTestRsp(6024),
- trHaltLsNow(6025),
- trTestReq(6026)
-
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the command type of the trace entry."
-
- ::= { ibmappnNodePortDlcTraceEntry 7 }
-
- ibmappnNodePortDlcTracUseWan OBJECT-TYPE
- SYNTAX INTEGER {
- other(1),
- notApplicable(2),
- useUnknown(3),
-
-
-
- McKenzie & Cheng [Page 22]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- useWan(4),
- useLan(5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the type of connection of the trace entry.
- For example, token ring and ethernet ports will have
- useLan as connection. For the dls port, it could be
- either useWan if connection is across Wan via dls
- sessions, or useLan if connection is to a local attached
- LAN."
-
- ::= { ibmappnNodePortDlcTraceEntry 8 }
-
-
-
- -- **************************************************************
- -- APPN Link Station Information
- --
-
-
- ibmappnNodeLsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodeLsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table contains detail information about the
- link station configuration and current status."
-
- ::= { ibmappnLinkStationInformation 1 }
-
- ibmappnNodeLsEntry OBJECT-TYPE
- SYNTAX IbmappnNodeLsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by the link station name."
-
- INDEX
- { ibmappnNodeLsName }
-
- ::= { ibmappnNodeLsTable 1 }
-
- IbmappnNodeLsEntry ::= SEQUENCE {
- ibmappnNodeLsName DisplayString,
- ibmappnNodeLsPortName DisplayString,
- ibmappnNodeLsDlcType INTEGER,
-
-
-
- McKenzie & Cheng [Page 23]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNodeLsDynamic INTEGER,
- ibmappnNodeLsState INTEGER,
- -- ls defined data / xid info
- ibmappnNodeLsCpName DisplayString,
- ibmappnNodeLsTgNum INTEGER,
- ibmappnNodeLsLimResource INTEGER,
- ibmappnNodeLsMigration INTEGER,
- ibmappnNodeLsBlockNum DisplayString,
- ibmappnNodeLsIdNum DisplayString,
- ibmappnNodeLsCpCpSession INTEGER,
- -- ls parms (common) / xid info
- ibmappnNodeLsTargetPacingCount INTEGER,
- ibmappnNodeLsMaxSendBtuSize INTEGER,
- -- tg characteristics
- ibmappnNodeLsEffCap INTEGER,
- ibmappnNodeLsConnCost INTEGER,
- ibmappnNodeLsByteCost INTEGER,
- ibmappnNodeLsSecurity INTEGER,
- ibmappnNodeLsDelay INTEGER,
- ibmappnNodeLsUsr1 INTEGER,
- ibmappnNodeLsUsr2 INTEGER,
- ibmappnNodeLsUsr3 INTEGER,
- -- ls (performance data)
- ibmappnNodeLsInXidBytes Counter,
- ibmappnNodeLsInMsgBytes Counter,
- ibmappnNodeLsInXidFrames Counter,
- ibmappnNodeLsInMsgFrames Counter,
- ibmappnNodeLsOutXidBytes Counter,
- ibmappnNodeLsOutMsgBytes Counter,
- ibmappnNodeLsOutXidFrames Counter,
- ibmappnNodeLsOutMsgFrames Counter,
- -- ls (propgation delay)
- ibmappnNodeLsEchoRsps Counter,
- ibmappnNodeLsCurrentDelay INTEGER,
- ibmappnNodeLsMaxDelay INTEGER,
- ibmappnNodeLsMinDelay INTEGER,
- ibmappnNodeLsMaxDelayTime TimeTicks,
- -- ls (Xid Statistics)
- ibmappnNodeLsGoodXids Counter,
- ibmappnNodeLsBadXids Counter,
- -- Dlc specific
- ibmappnNodeLsSpecific OBJECT IDENTIFIER,
- ibmappnNodeLsSubState INTEGER,
- ibmappnNodeLsStartTime TimeTicks,
- ibmappnNodeLsActiveTime TimeTicks,
- ibmappnNodeLsCurrentStateTime TimeTicks
- }
-
-
-
-
- McKenzie & Cheng [Page 24]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNodeLsName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the link station.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodeLsEntry 1 }
-
-
- ibmappnNodeLsPortName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the port.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodeLsEntry 2 }
-
-
- ibmappnNodeLsDlcType OBJECT-TYPE
- SYNTAX INTEGER {
- other(1), -- none of the following
- sdlc(2),
- dls(3),
- socket(4),
- ethernet(5),
- tokenRing(6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of DLC interface, distinguished according
- to the protocol immediately 'below' this layer."
-
- ::= { ibmappnNodeLsEntry 3 }
-
- ibmappnNodeLsDynamic OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Identifies whether this resource is a dynamic link station.
- Dynamic link stations are created when adjacent nodes
- that have not been locally defined establish a connection
- with this node."
-
-
-
- McKenzie & Cheng [Page 25]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodeLsEntry 4 }
-
-
- ibmappnNodeLsState OBJECT-TYPE
- SYNTAX INTEGER {
- inactive(1),
- pendactive(2),
- active(3),
- pendinact(4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "State of this link station."
-
- ::= { ibmappnNodeLsEntry 5 }
-
- ibmappnNodeLsCpName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Fully-qualified name of the adjacent node for this link
- station. The name can be from three to seventeen
- characters. Format is netid.cpname."
-
- ::= { ibmappnNodeLsEntry 6 }
-
- ibmappnNodeLsTgNum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number associated with the TG to this link station."
-
- ::= { ibmappnNodeLsEntry 7 }
-
- ibmappnNodeLsLimResource OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the link station is
- a limited resource. If it is, the TG
- is deactivated when there are no sessions."
-
- ::= { ibmappnNodeLsEntry 8 }
-
-
-
-
- McKenzie & Cheng [Page 26]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNodeLsMigration OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this link station will be used
- for connections to down-level or migration partners."
-
- ::= { ibmappnNodeLsEntry 9 }
-
- ibmappnNodeLsBlockNum OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The block number is the first three digits of the node_id.
- These 3 hexideimal digits identify the product and are not
- configurable."
-
- ::= { ibmappnNodeLsEntry 10 }
-
- ibmappnNodeLsIdNum OBJECT-TYPE
- SYNTAX DisplayString (SIZE (5))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The ID number is the last 5 digits of the node_id.
- These 5 hexadecimal digits are administratively defined and
- combined with the 3 digit block number form the node_id.
- This node_id is used to identify the local node and is
- include in APPN alerts as well as being included in XIDs.
- A unique value is required for connections to SNA
- sub-area."
-
- ::= { ibmappnNodeLsEntry 11 }
-
- ibmappnNodeLsCpCpSession OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether CP-CP sessions are
- supported by this link station."
-
- ::= { ibmappnNodeLsEntry 12 }
-
- ibmappnNodeLsTargetPacingCount OBJECT-TYPE
- SYNTAX INTEGER
-
-
-
- McKenzie & Cheng [Page 27]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Numeric value between 0 and 32767 inclusive indicating
- the desired pacing window size for BINDs on this TG.
- The number is significant only when fixed bind pacing
- is being performed."
-
- ::= { ibmappnNodeLsEntry 13 }
-
- ibmappnNodeLsMaxSendBtuSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Numeric value between 0 and 32767 inclusive indicating
- the desired number of bytes in a Basic Transmission Unit
- (BTU) that can be sent on this TG.
- This is an administratively assigned value."
-
- ::= { ibmappnNodeLsEntry 14 }
-
- ibmappnNodeLsEffCap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The effective capacity is an integer value that indicates
- the kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 15 }
-
- ibmappnNodeLsConnCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255, which indicates maximum cost.
- This is an administratively assigned value associated
- with the TG using this link station."
-
-
-
-
- McKenzie & Cheng [Page 28]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodeLsEntry 16 }
-
- ibmappnNodeLsByteCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative cost of transmitting a byte over this link.
- Range is from 0 (lowest cost) to 255.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 17 }
-
- ibmappnNodeLsSecurity OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The security is represented as an integer with a range of
- 1 thru 255 with the most common values enumerated as
- defined above.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 18 }
-
- ibmappnNodeLsDelay OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative amount of time that it takes for a signal to
-
-
-
- McKenzie & Cheng [Page 29]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- travel the length of the logical link. This time is
- represented in micro seconds, with some of the more
- common values enumerated.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 19 }
-
- ibmappnNodeLsUsr1 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "First user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 20 }
-
- ibmappnNodeLsUsr2 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Second user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 21 }
-
- ibmappnNodeLsUsr3 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Third user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with the TG using this link station."
-
- ::= { ibmappnNodeLsEntry 22 }
-
- ibmappnNodeLsInXidBytes OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
-
-
-
- McKenzie & Cheng [Page 30]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- DESCRIPTION
- "Number of XID bytes received."
-
- ::= { ibmappnNodeLsEntry 23 }
-
- ibmappnNodeLsInMsgBytes OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of message (I-frame) bytes received."
-
- ::= { ibmappnNodeLsEntry 24 }
-
- ibmappnNodeLsInXidFrames OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of XID frames received."
-
- ::= { ibmappnNodeLsEntry 25 }
-
- ibmappnNodeLsInMsgFrames OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of message (I-frame) frames received."
-
- ::= { ibmappnNodeLsEntry 26 }
-
- ibmappnNodeLsOutXidBytes OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of XID bytes sent."
-
- ::= { ibmappnNodeLsEntry 27 }
-
- ibmappnNodeLsOutMsgBytes OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of message (I-frame) bytes sent."
-
-
-
-
- McKenzie & Cheng [Page 31]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodeLsEntry 28 }
-
- ibmappnNodeLsOutXidFrames OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of XID frames sent."
-
- ::= { ibmappnNodeLsEntry 29 }
-
- ibmappnNodeLsOutMsgFrames OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of message (I-frame) frames sent."
-
- ::= { ibmappnNodeLsEntry 30 }
-
- ibmappnNodeLsEchoRsps OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of responses returned from adjacent link station.
- A response should be returned for each test frame sent by
- this node.
- Test frames are sent to adjacent nodes periodically to
- verify connectivity and to measure that actual round trip
- time, that is the time the test frame is sent until the
- response is received."
-
- ::= { ibmappnNodeLsEntry 31 }
-
- ibmappnNodeLsCurrentDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time that it took for the last test signal to be
- sent and returned from this link station to the
- adjacent links station.
- This time is represented in milliseconds."
-
- ::= { ibmappnNodeLsEntry 32 }
-
- ibmappnNodeLsMaxDelay OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 32]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The longest time it took for a test signal
- to be sent and returned from this link station to the
- adjacent links station.
- This time is represented in milliseconds ."
-
- ::= { ibmappnNodeLsEntry 33 }
-
- ibmappnNodeLsMinDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The shortest time it took for a test signal
- to be sent and returned from this link station to the
- adjacent links station.
- This time is represented in milliseconds."
-
- ::= { ibmappnNodeLsEntry 34 }
-
- ibmappnNodeLsMaxDelayTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time (since system up in hundredth of seconds)
- when the longest delay occurred.
- This time can be used to identify when this high
- water mark occurred in relation to the last initialization
- of the APPN node."
-
- ::= { ibmappnNodeLsEntry 35 }
-
- ibmappnNodeLsGoodXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of successful XIDs that have occurred
- on this link station since the time it was started."
-
- ::= { ibmappnNodeLsEntry 36 }
-
- ibmappnNodeLsBadXids OBJECT-TYPE
- SYNTAX Counter
-
-
-
- McKenzie & Cheng [Page 33]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of unsuccessful XIDs that have occurred
- on this link station since the time it was started."
-
- ::= { ibmappnNodeLsEntry 37 }
-
- ibmappnNodeLsSpecific OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Identifies the DLC specific OBJECT IDENTIFIER
- that can provide additional information."
-
- ::= { ibmappnNodeLsEntry 38 }
-
- ibmappnNodeLsSubState OBJECT-TYPE
- SYNTAX INTEGER {
- inactive(1),
- sentReqOpnstn(2),
- pendXidExch(3),
- sentActAs(4),
- sentSetMode(5),
- active(6),
- sentDeactAsOrd(7),
- sentDiscOrd(8),
- sentDestroyTg(9),
- sentCreateTg(10),
- sentConnReq(11),
- pendRcvConnInd(12),
- pendSendConnRsp(13),
- sentConnRsp(14),
- pendDeact(15)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "State of this link station."
-
- ::= { ibmappnNodeLsEntry 39 }
-
- ibmappnNodeLsStartTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
-
-
-
- McKenzie & Cheng [Page 34]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- "The time (in hundredth of seconds) this link station
- has been active the last time since the time APPN was
- initialized."
-
- ::= { ibmappnNodeLsEntry 40 }
-
- ibmappnNodeLsActiveTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time (in hundredth of seconds) this link station
- has been in the active state.
- A zero value indicates the link station has never been
- active."
-
- ::= { ibmappnNodeLsEntry 41 }
-
- ibmappnNodeLsCurrentStateTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time (in hundredth of seconds) the link station is
- in the current state."
-
- ::= { ibmappnNodeLsEntry 42 }
-
-
- -- **************************************************************
- -- Link station table (TCP/IP specific)
- --
-
- ibmappnNodeLsIpTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodeLsIpEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Link station table (TCP/IP specific)."
-
- ::= { ibmappnLinkStationInformation 2 }
-
- ibmappnNodeLsIpEntry OBJECT-TYPE
- SYNTAX IbmappnNodeLsIpEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The IP Name is used as the index to this table."
-
-
-
- McKenzie & Cheng [Page 35]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- INDEX
- {ibmappnNodeLsIpName }
-
- ::= { ibmappnNodeLsIpTable 1 }
-
- IbmappnNodeLsIpEntry ::= SEQUENCE {
- ibmappnNodeLsIpName DisplayString,
- ibmappnNodeLsIpState INTEGER,
- ibmappnNodeLsLocalIpAddr IpAddress,
- ibmappnNodeLsLocalIpPortNum INTEGER,
- ibmappnNodeLsRemoteIpAddr IpAddress,
- ibmappnNodeLsRemoteIpPortNum INTEGER
- }
-
- ibmappnNodeLsIpName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this link station. The
- name can be from one to eight characters."
-
- ::= { ibmappnNodeLsIpEntry 1 }
-
- ibmappnNodeLsIpState OBJECT-TYPE
- SYNTAX INTEGER {
- inactive(1),
- pendactive(2),
- active(3),
- pendinact(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "State of this link station."
-
- ::= { ibmappnNodeLsIpEntry 2 }
-
- ibmappnNodeLsLocalIpAddr OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local IP address."
-
- ::= { ibmappnNodeLsIpEntry 3 }
-
- ibmappnNodeLsLocalIpPortNum OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 36]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local TCP/IP port number.
- The default listening port will be administratively
- assigned and will dynamically change if this node
- initiates a session with adjacent node."
-
- ::= { ibmappnNodeLsIpEntry 4 }
-
-
-
- ibmappnNodeLsRemoteIpAddr OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote IP address."
-
- ::= { ibmappnNodeLsIpEntry 5 }
-
- ibmappnNodeLsRemoteIpPortNum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote TCP/IP port number."
-
- ::= { ibmappnNodeLsIpEntry 6 }
-
-
-
- -- **************************************************************
- -- Ls Table (DLS specific)
- --
-
- ibmappnNodeLsDlsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodeLsDlsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Ls Table (DLS specific)."
-
- ::= { ibmappnLinkStationInformation 3 }
-
- ibmappnNodeLsDlsEntry OBJECT-TYPE
- SYNTAX IbmappnNodeLsDlsEntry
-
-
-
- McKenzie & Cheng [Page 37]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The DLS Name is used as the index to this table."
-
- INDEX
- {ibmappnNodeLsDlsName }
-
- ::= { ibmappnNodeLsDlsTable 1 }
-
- IbmappnNodeLsDlsEntry ::= SEQUENCE {
- ibmappnNodeLsDlsName DisplayString,
- ibmappnNodeLsDlsState INTEGER,
- ibmappnNodeLsLocalDlsMac OCTET STRING,
- ibmappnNodeLsLocalDlsSap OCTET STRING,
- ibmappnNodeLsRemoteDlsMac OCTET STRING,
- ibmappnNodeLsRemoteDlsSap OCTET STRING
- }
-
- ibmappnNodeLsDlsName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this link station.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodeLsDlsEntry 1 }
-
- ibmappnNodeLsDlsState OBJECT-TYPE
- SYNTAX INTEGER {
- inactive(1),
- pendactive(2),
- active(3),
- pendinact(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "State of this link station."
-
- ::= { ibmappnNodeLsDlsEntry 2 }
-
- ibmappnNodeLsLocalDlsMac OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (6))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
-
-
-
- McKenzie & Cheng [Page 38]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- "Local MAC address."
-
- ::= { ibmappnNodeLsDlsEntry 3 }
-
- ibmappnNodeLsLocalDlsSap OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local SAP address."
-
- ::= { ibmappnNodeLsDlsEntry 4 }
-
- ibmappnNodeLsRemoteDlsMac OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (6))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote MAC address."
-
- ::= { ibmappnNodeLsDlsEntry 5 }
-
- ibmappnNodeLsRemoteDlsSap OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote SAP address."
-
- ::= { ibmappnNodeLsDlsEntry 6 }
-
-
-
- -- **************************************************************
- -- Ls Table (Token Ring specific)
- --
-
- ibmappnNodeLsTrTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodeLsTrEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Ls Table (Token Ring specific)."
-
- ::= { ibmappnLinkStationInformation 4 }
-
- ibmappnNodeLsTrEntry OBJECT-TYPE
- SYNTAX IbmappnNodeLsTrEntry
-
-
-
- McKenzie & Cheng [Page 39]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The TR Name is used as the index to this table."
- INDEX
- {ibmappnNodeLsTrName }
-
- ::= { ibmappnNodeLsTrTable 1 }
-
- IbmappnNodeLsTrEntry ::= SEQUENCE {
- ibmappnNodeLsTrName DisplayString,
- ibmappnNodeLsTrState INTEGER,
- ibmappnNodeLsLocalTrMac OCTET STRING,
- ibmappnNodeLsLocalTrSap OCTET STRING,
- ibmappnNodeLsRemoteTrMac OCTET STRING,
- ibmappnNodeLsRemoteTrSap OCTET STRING
- }
-
- ibmappnNodeLsTrName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this link station.
- The name can be from one to eight characters."
-
- ::= { ibmappnNodeLsTrEntry 1 }
-
- ibmappnNodeLsTrState OBJECT-TYPE
- SYNTAX INTEGER {
- inactive(1),
- pendactive(2),
- active(3),
- pendinact(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "State of this link station."
-
- ::= { ibmappnNodeLsTrEntry 2 }
-
- ibmappnNodeLsLocalTrMac OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (6))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local MAC address."
-
-
-
- McKenzie & Cheng [Page 40]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNodeLsTrEntry 3 }
-
- ibmappnNodeLsLocalTrSap OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Local SAP address."
-
- ::= { ibmappnNodeLsTrEntry 4 }
-
- ibmappnNodeLsRemoteTrMac OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (6))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote MAC address."
-
- ::= { ibmappnNodeLsTrEntry 5 }
-
- ibmappnNodeLsRemoteTrSap OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote SAP address."
-
- ::= { ibmappnNodeLsTrEntry 6 }
-
-
- -- **************************************************************
- -- This table provides information about errors this node encountered
- -- with connections to adjacent nodes. This includes all exceptional
- -- conditions encountered establishing connections and all exceptional
- -- conditions that result in terminating the connection.
- -- **************************************************************
-
- ibmappnNodeLsStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNodeLsStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table contains information related to exceptional
- and potential exceptional conditions that occur during
- the activation, XID exchange, and termination of the
- connection."
-
- ::= { ibmappnLinkStationInformation 5 }
-
-
-
- McKenzie & Cheng [Page 41]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNodeLsStatusEntry OBJECT-TYPE
- SYNTAX IbmappnNodeLsStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by the LsStatusIndex, which is an
- integer that is continuously updated until it eventually
- wraps. This provides the management station the ability
- to retrieve only the updates to the table by using the
- standard GET NEXT."
-
- INDEX
- { ibmappnNodeLsStatusIndex }
-
- ::= { ibmappnNodeLsStatusTable 1 }
-
- IbmappnNodeLsStatusEntry ::= SEQUENCE {
- ibmappnNodeLsStatusIndex INTEGER,
- ibmappnNodeLsStatusTime TimeTicks,
- ibmappnNodeLsStatusLsName DisplayString,
- ibmappnNodeLsStatusCpName DisplayString,
- ibmappnNodeLsStatusNodeId OCTET STRING,
- ibmappnNodeLsStatusTgNum INTEGER,
- ibmappnNodeLsStatusGeneralSense OCTET STRING,
- ibmappnNodeLsStatusNofRetry INTEGER,
- ibmappnNodeLsStatusEndSense OCTET STRING,
- ibmappnNodeLsStatusXidLocalSense OCTET STRING,
- ibmappnNodeLsStatusXidRemoteSense OCTET STRING,
- ibmappnNodeLsStatusXidByteInError INTEGER,
- ibmappnNodeLsStatusXidBitInError INTEGER,
- ibmappnNodeLsStatusDlcType INTEGER,
- ibmappnNodeLsStatusLocalAddr DisplayString,
- ibmappnNodeLsStatusRemoteAddr DisplayString
- }
-
-
- ibmappnNodeLsStatusIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This index is continuous index this table."
-
- ::= { ibmappnNodeLsStatusEntry 1 }
-
- ibmappnNodeLsStatusTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 42]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Time (in hundreds of a second) since this node was last
- initialized."
-
- ::= { ibmappnNodeLsStatusEntry 2 }
-
-
- ibmappnNodeLsStatusLsName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this link station."
-
- ::= { ibmappnNodeLsStatusEntry 3 }
-
- ibmappnNodeLsStatusCpName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned fully-qualified name of the
- adjacent node partner. This will be provided when the
- adjacent node has been defined at this node or when the
- XID sequence has proceeded far enough to to identify the
- adjacent node. A blank CP name will indicate the name is
- unknown."
-
- ::= { ibmappnNodeLsStatusEntry 4 }
-
- ibmappnNodeLsStatusNodeId OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Adjacent Node id"
-
-
- ::= { ibmappnNodeLsStatusEntry 5 }
-
- ibmappnNodeLsStatusTgNum OBJECT-TYPE
- SYNTAX INTEGER (0..256)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number associated with the TG to this link station
- with a range from 0 to 256. A value of 256 indicates
-
-
-
- McKenzie & Cheng [Page 43]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- the tg number has not been negotiated and is unknown at
- this time."
-
- ::= { ibmappnNodeLsStatusEntry 6 }
-
- ibmappnNodeLsStatusGeneralSense OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The error sense code associated with the start sequence of
- activation of a link up to the beginning of the XID
- sequence."
-
- ::= { ibmappnNodeLsStatusEntry 7 }
-
- ibmappnNodeLsStatusNofRetry OBJECT-TYPE
- SYNTAX INTEGER {
- retry(1),
- noretry(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether Node Operator Facility will retry the
- start request to activate the link."
-
- ::= { ibmappnNodeLsStatusEntry 8 }
-
- ibmappnNodeLsStatusEndSense OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The sense code associated with the termination of the link
- connection to adjacent node. This includes all sense
- information included in the disconnect recieved from the
- lower layer DLCs and also sense information indicating the
- link termination originated by upper layer APPN components."
-
- ::= { ibmappnNodeLsStatusEntry 9 }
-
- ibmappnNodeLsStatusXidLocalSense OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The error sense code associated with the rejection of the
-
-
-
- McKenzie & Cheng [Page 44]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- XID."
-
- ::= { ibmappnNodeLsStatusEntry 10 }
-
- ibmappnNodeLsStatusXidRemoteSense OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The error sense code adjacent node returned to this node
- indicating the reason the XID was rejected."
-
- ::= { ibmappnNodeLsStatusEntry 11 }
-
- ibmappnNodeLsStatusXidByteInError OBJECT-TYPE
- SYNTAX INTEGER {
- na(1000)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This identifies the actual byte in the XID that caused the
- error. The value of zero (0) indicates that the variable
- has no meaning."
-
- ::= { ibmappnNodeLsStatusEntry 12 }
-
- ibmappnNodeLsStatusXidBitInError OBJECT-TYPE
- SYNTAX INTEGER {
- na(8) -- not applicable
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This identifies the actual bit within the error byte of the
- XID. This only has meaning when the byte in error is
- greater than zero."
-
- ::= { ibmappnNodeLsStatusEntry 13 }
-
- ibmappnNodeLsStatusDlcType OBJECT-TYPE
- SYNTAX INTEGER {
- other(1),
- sdlc(2),
- dls(3),
- socket(4),
- ethernet(5),
- tr(6)
-
-
-
- McKenzie & Cheng [Page 45]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This identifies DLC type that was being used when error
- occurred. This also is used to the format of the
- local and remote address provided.
-
- other = free form DisplayString
-
- ip = ld. ld. ld. ld / 2d
-
- tr = lx: lx: lx: lx: lx: lx . lx
-
- dlsw = lx: lx: lx: lx: lx: lx . lx
-
- ethernet = lx: lx: lx: lx: lx: lx . lx
-
- "
-
- ::= { ibmappnNodeLsStatusEntry 14 }
-
- ibmappnNodeLsStatusLocalAddr OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This contains a displayable string that identifies the
- DLC type and appropriate address. See DlcType above for
- details of the format."
-
- ::= { ibmappnNodeLsStatusEntry 15 }
-
- ibmappnNodeLsStatusRemoteAddr OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This contains a displayable string that identifies the
- DLC type and appropriate address. See DlcType above for
- details of the format."
-
- ::= { ibmappnNodeLsStatusEntry 16 }
-
-
-
- -- **************************************************************
- -- APPN SNMP Performance Information
-
-
-
- McKenzie & Cheng [Page 46]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- --
-
- ibmappnSnmpInPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of messages delivered to the APPN SNMP sub-agent."
-
- ::= { ibmappnSnmpInformation 1 }
-
- ibmappnSnmpInGetRequests OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of GET requests delivered to the APPN SNMP
- sub-agent."
-
- ::= { ibmappnSnmpInformation 2 }
-
- ibmappnSnmpInGetNexts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of GETNEXT requests delivered to the APPN SNMP
- sub-agent."
-
- ::= { ibmappnSnmpInformation 3 }
-
- ibmappnSnmpInSetRequests OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of SET requests delivered to the APPN SNMP
- sub-agent."
-
- ::= { ibmappnSnmpInformation 4 }
-
- ibmappnSnmpInTotalVars OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of VARIABLES included in both
- GET and GETNEXT requests to the APPN SNMP sub-agent."
-
-
-
- McKenzie & Cheng [Page 47]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnSnmpInformation 5 }
-
- ibmappnSnmpInGetVars OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of VARIBLES included in all
- GET requests to the APPN SNMP sub-agent."
-
- ::= { ibmappnSnmpInformation 6 }
-
- ibmappnSnmpInGetNextVars OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of VARIABLES included in all
- GETNEXT requests to the APPN SNMP sub-agent."
-
- ::= { ibmappnSnmpInformation 7 }
-
- ibmappnSnmpInSetVars OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of VARIBLES included in all
- SET requests to the APPN SNMP sub-agent."
-
- ::= { ibmappnSnmpInformation 8 }
-
- ibmappnSnmpOutNoSuchNames OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of VARIABLES that could not
- be found by the APPN SNMP sub-agent."
-
- ::= { ibmappnSnmpInformation 9 }
-
- ibmappnSnmpOutGenErrs OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of undefined errors that
-
-
-
- McKenzie & Cheng [Page 48]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- occurred processing SNMP request to the
- APPN SNMP sub-agent."
-
- ::= { ibmappnSnmpInformation 10 }
-
-
- -- **************************************************************
-
- -- This group provides global information about the
- -- APPN node performance.
-
- -- The first section applies to the APPN control point
- -- storage utilization.
-
-
- ibmappnMemorySize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Size of the shared storage segment, as obtained
- by storage management from the underlying operating
- system."
-
- ::= { ibmappnMemoryUse 1 }
-
- ibmappnMemoryUsed OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of bytes in the segment that are currently
- allocated to process."
-
- ::= { ibmappnMemoryUse 2 }
-
- ibmappnMemoryWarnThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Allocation threshold beyond which storage
- management considers the storage resources
- to be constrained."
-
- ::= { ibmappnMemoryUse 3 }
-
- ibmappnMemoryCritThresh OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 49]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Allocation threshold beyond which storage
- management considers the storage resources
- to be critically constrained."
-
- ::= { ibmappnMemoryUse 4 }
-
-
- -- **************************************************************
- -- The following are Counters maintained by the APPN CS component that
- -- relate to total overall XID activity.
- ------------------------------------------------------------------------
- ibmappnNodeDefLsGoodXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current number of successfull XIDs that have occurred
- on all defined link stations since the last time this
- node was initialized."
-
- ::= { ibmappnXidInformation 1 }
-
- ibmappnNodeDefLsBadXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current number of unsuccessfull XIDs that have
- occurred on all defined link stations since the last
- time this node was initialized."
-
- ::= { ibmappnXidInformation 2 }
-
- ibmappnNodeDynLsGoodXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current number of successfull XIDs that have
- occurred on all dynamic link stations since the last
- time this node was initialized."
-
- ::= { ibmappnXidInformation 3 }
-
-
-
-
- McKenzie & Cheng [Page 50]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNodeDynLsBadXids OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current number of unsuccessfull XIDs that have
- occurred on all dynamic link stations since the last
- time this node was initialized."
-
- ::= { ibmappnXidInformation 4 }
-
-
-
- -- ************** The APPN Topology Group ***********************
-
- ibmappnNn OBJECT IDENTIFIER ::= { ibmappn 2 }
- ibmappnNnTopo OBJECT IDENTIFIER ::= { ibmappnNn 1 }
- ibmappnNnTopology OBJECT IDENTIFIER ::= { ibmappnNn 3 }
-
-
- -- This group will be used to represent the entire APPN network
- -- topology, including Network nodes, virtual nodes and
- -- all TGs associated with these nodes.
- --
-
- -- Network nodes
- -- The APPN topology database consists of information about every
- -- APPN network node. This information is learned over time
- -- as each network node exchanges topology information with
- -- each of its adjacent network nodes. The database consists
- -- of information about each node and all of the transmissions
- -- groups used by each node.
-
- -- Virtual nodes
- -- Information about virtual nodes (connection networks) is treated
- -- the same as information about network node
- -- and is replicated at each network node.
- -- The node name is the only meaningful information. The other
- -- node objects use default values. Each node that has defined
- -- a TG with this virtual node as the destination also defines a
- -- TG on this virtual node. There is a TG record for each node
- -- that uses this virtual node.
- --
- --
- -- The APPN node table represents the APPN topology
- -- database with the APPN CP fully-qualified name
- -- being used as the index to this table.
- -- This entire table could be retrieved using the GET NEXT command,
-
-
-
- McKenzie & Cheng [Page 51]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- however, due to the dynamics of APPN, nodes could come and
- -- go and status could change as the table is being
- -- retrieved. Although in most cases the data retrieved will be valid,
- -- missing and invalid status could cause problems for
- -- a management application that was graphically displaying
- -- this data.
- -- This potential problem can be eliminated by
- -- retrieving the FRSN before and after completion
- -- of retrieval of the APPN topology table.
- -- If the FRSN has changed, then repeat the
- -- retrieval of the entire topology table
- -- until the FRSN remains unchanged.
- -- Object 'appnNnFrsn' represents the last
- -- change or update to this node's topology
- -- database.
- --
- --
- -- The format of the actual database is as follows:
- --
- -- Node table (entry for each node in network)
- -- TG table (entry for each TG owned by node)
- --
- -- Due to SNMP ASN.1 limitations, we cannot represent
- -- the TG table within the node table. We define
- -- separate tables for nodes and TGs, adding the node
- -- name to each TG entry to provide a means of
- -- correlating each TG with its originating node.
-
-
-
- ibmappnNnTopoMaxNodes OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum number of nodes allowed in the APPN topology
- database. This administratively assigned value must be
- equal to or greater than the maximum total number of end
- nodes and network nodes.
- If the number of nodes exceeds this value, APPN will issue
- an Alert and the node can no longer participate as a network
- node."
-
- ::= { ibmappnNnTopo 1 }
-
- ibmappnNnTopoCurNumNodes OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 52]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Current number of nodes in this node's topology database.
- If this value exceeds the maximum number of nodes allowed
- (NnTopoMaxNodes), APPN alert CPDB002 is
- issued."
-
- ::= { ibmappnNnTopo 2 }
-
- ibmappnNnTopoInTdus OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of TDUs received from
- all adjacent NN since last initialization."
-
- ::= { ibmappnNnTopo 3 }
-
- ibmappnNnTopoOutTdus OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of TDUs built by this node to be sent to
- all adjacent NN since last initialization."
-
- ::= { ibmappnNnTopo 4 }
-
- ibmappnNnTopoNodeLowRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node updates received by this
- node with a RSN less than the current RSN. Both even and
- odd RSN are included in this count.
- These TDUs are not errors, but result when TDUs are
- broadcast to all adjacent network nodes. No update to
- this node's topology database occurs, but this node will
- send a TDU with it's higher RSN to the adjacent node that
- sent this low RSN."
-
- ::= { ibmappnNnTopo 5 }
-
- ibmappnNnTopoNodeEqualRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 53]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node updates received by this
- node with a RSN equal to the current RSN. Both even and
- odd RSN are included in this count.
- These TDUs are not errors, but result when TDUs are
- broadcast to all adjacent network nodes. No update to
- this node's topology database occurs."
-
- ::= { ibmappnNnTopo 6 }
-
- ibmappnNnTopoNodeGoodHighRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node updates received by this
- node with a RSN greater than the current RSN.
- This results in updating this nodes topology and
- broadcasting a TDU to all adjacent network nodes. It is
- not required to send a TDU to the sender of this update
- because that node already has the update."
-
- ::= { ibmappnNnTopo 7 }
-
-
-
- ibmappnNnTopoNodeBadHighRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node updates received by this
- node with an odd RSN greater than the current RSN.
- These updates represent a topology inconsistency detected
- by one of the APPN network nodes.
- This results in updating this nodes topology and broadcasting
- a TDU to all adjacent network nodes."
-
- ::= { ibmappnNnTopo 8 }
-
-
- ibmappnNnTopoNodeStateUpdates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology Node records built as a result
-
-
-
- McKenzie & Cheng [Page 54]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- of internally detected node state changes that affect APPN
- topology and routing. Updates are sent via TDUs to all
- adjacent network nodes."
-
- ::= { ibmappnNnTopo 9 }
-
- ibmappnNnTopoNodeErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node records inconsistencies
- detected by this node. This occurs when this node attempts
- to update its topology database and detects a data
- inconsistency. This node will create a TDU with the
- current RSN incremented to the next odd number and
- broadcast it to all adjacent NNs."
-
- ::= { ibmappnNnTopo 10 }
-
- ibmappnNnTopoNodeTimerUpdates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node records built for this
- node's resource due to timer updates. Updates are sent via
- TDUs to all adjacent network nodes. These updates insure
- other network nodes do not delete this node's resources
- from their topology database."
-
- ::= { ibmappnNnTopo 11 }
-
- ibmappnNnTopoNodePurges OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology node records purged from this
- node's topology database. This occurs when a node has not
- been updated in a specified amount of time. The owning
- node is responsible for broadcasting updates for its
- resource that it wants kept in the network topology."
-
- ::= { ibmappnNnTopo 12 }
-
-
- ibmappnNnTopoTgLowRsns OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 55]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG updates received by this
- node with a RSN less than the current RSN. Both even and
- odd RSN are included in this count.
- These TDUs are not errors, but result when TDUs are
- broadcast to all adjacent network nodes. No update to
- this node's topology database occurs, but this node will
- send a TDU with it's higher RSN to the sender of the low
- RSN."
-
- ::= { ibmappnNnTopo 13 }
-
- ibmappnNnTopoTgEqualRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG updates received by this
- node with a RSN equal to the current RSN. Both even and
- odd RSN are included in this count.
- These TDUs are not errors, but result when TDUs are
- broadcast to all adjacent network nodes. No update to
- this node's topology database occurs."
-
- ::= { ibmappnNnTopo 14 }
-
- ibmappnNnTopoTgGoodHighRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG updates received by this
- node with a RSN greater than the current RSN.
- This results in updating this nodes topology and
- broadcasting the update to all adjacent network nodes."
-
- ::= { ibmappnNnTopo 15 }
-
-
- ibmappnNnTopoTgBadHighRsns OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG updates received by this
-
-
-
- McKenzie & Cheng [Page 56]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- node with an odd RSN greater than the current RSN.
- These updates represent a topology inconsistency detected
- by one of the APPN network nodes.
- This results in updating this nodes topology and
- broadcasting a TDU to all adjacent network nodes."
-
- ::= { ibmappnNnTopo 16 }
-
-
- ibmappnNnTopoTgStateUpdates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG records built as a result
- of internally detected node state changes that affect APPN
- topology and routing. Updates are sent via TDUs to all
- adjacent network nodes."
-
- ::= { ibmappnNnTopo 17 }
-
- ibmappnNnTopoTgErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG records inconsistencies
- detected by this node. This occurs when this node
- attempts to update its topology database and detects a
- data inconsistency. This node will create a TDU with
- the current RSN incremented to the next odd number and
- broadcast it to all adjacent NNs."
-
- ::= { ibmappnNnTopo 18 }
-
- ibmappnNnTopoTgTimerUpdates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG records built for this
- node's resource due to timer updates. Updates are sent via
- TDUs to all adjacent network nodes. These updates insure
- other network nodes do not delete this node's resources
- from their topology database."
-
- ::= { ibmappnNnTopo 19 }
-
-
-
-
- McKenzie & Cheng [Page 57]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnTopoTgPurges OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total number of topology TG records purged from this
- node's topology database. This occurs when a TG has not
- been updated in a specified amount of time. The owning
- node is responsible for broadcasting updates for its
- resource that it wants to keep in the network topology."
-
- ::= { ibmappnNnTopo 20 }
-
-
- ibmappnNnTopoTotalRouteCalcs OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of routes calculated for all class of services
- since the last initialization."
-
- ::= { ibmappnNnTopo 21 }
-
- ibmappnNnTopoTotalRouteRejs OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of route requests for all class of services that
- could not be calculated since last initialization."
-
- ::= { ibmappnNnTopo 22 }
-
-
- ibmappnNnTopoRouteTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNnTopoRouteEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Table containing an entry for every Class of Service
- that it has calculated a route for."
-
- ::= { ibmappnNnTopo 23 }
-
-
-
- ibmappnNnTopoRouteEntry OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 58]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX IbmappnNnTopoRouteEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Class of Service name is the index for this table."
-
- INDEX
- {ibmappnNnTopoRouteCos}
-
- ::= { ibmappnNnTopoRouteTable 1 }
-
- IbmappnNnTopoRouteEntry ::= SEQUENCE {
- ibmappnNnTopoRouteCos DisplayString,
- ibmappnNnTopoRouteTrees Counter,
- ibmappnNnTopoRouteCalcs Counter,
- ibmappnNnTopoRouteRejs Counter
- }
-
-
- ibmappnNnTopoRouteCos OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Class of Service for the route."
-
- ::= { ibmappnNnTopoRouteEntry 1 }
-
- ibmappnNnTopoRouteTrees OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of routes tree caches built for this Class of
- Service since the last initialization."
-
- ::= { ibmappnNnTopoRouteEntry 2 }
-
-
- ibmappnNnTopoRouteCalcs OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of routes calculated since last initialization."
-
- ::= { ibmappnNnTopoRouteEntry 3 }
-
-
-
-
- McKenzie & Cheng [Page 59]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnTopoRouteRejs OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of route requests that could not
- be calculated since last initialization."
-
- ::= { ibmappnNnTopoRouteEntry 4 }
-
-
- --Adjacent node table
- -- Node name (only applies to adjacent nodes)
- -- Number of out of sequence TDUs
- -- Status of CP-CP sessions (ConWinner/ConLoser)
- -- Last FRSN sent
- -- Last FRSN received
-
-
- ibmappnNnAdjNodeTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNnAdjNodeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Table containing an entry for every node. The information
- kept in this table is the last FRSN sent and received,
- the status of the CP-CP sessions, and a gauge that
- indicates the number of outstanding TDUs."
-
- ::= { ibmappnNn 2 }
-
-
- ibmappnNnAdjNodeEntry OBJECT-TYPE
- SYNTAX IbmappnNnAdjNodeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The adjacent node name is the index for this table."
-
- INDEX
- {ibmappnNnAdjNodeAdjName}
-
- ::= { ibmappnNnAdjNodeTable 1 }
-
- IbmappnNnAdjNodeEntry ::= SEQUENCE {
- ibmappnNnAdjNodeAdjName DisplayString,
- ibmappnNnAdjNodeCpCpSessStatus INTEGER,
- ibmappnNnAdjNodeOutOfSeqTdus Gauge,
-
-
-
- McKenzie & Cheng [Page 60]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnAdjNodeLastFrsnSent INTEGER,
- ibmappnNnAdjNodeLastFrsnRcvd INTEGER
- }
-
- ibmappnNnAdjNodeAdjName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An administratively-assigned fully-qualified
- name of this node's adjacent network node."
-
- ::= { ibmappnNnAdjNodeEntry 1 }
-
- ibmappnNnAdjNodeCpCpSessStatus OBJECT-TYPE
- SYNTAX INTEGER {
- active(1),
- conLoserActive(2),
- conWinnerActive(3),
- inactive(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the state of CP-CP sessions between this node
- and adjacent network and end nodes. Incative indicates no
- CP-CP sessions exists between this node and the adjacent
- node. Active indicates CP-CP sessons are active using both
- the ConWinner and ConLoser sessions. The session initiated
- by this node is refered to as the ConWinner session and is
- used by this node to send to the adjacent node. The
- ConLoserr session is initiated by the adjacent node and
- is used by this node to receive from the adjacent node."
-
- ::= { ibmappnNnAdjNodeEntry 2 }
-
- ibmappnNnAdjNodeOutOfSeqTdus OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of out of sequence Topology Database
- Updates (TDUs). In a quiesced state, this value is
- zero. In normal operation, the value varies
- depending on the network environment."
-
- ::= { ibmappnNnAdjNodeEntry 3 }
-
-
-
-
- McKenzie & Cheng [Page 61]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnAdjNodeLastFrsnSent OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This FRSN
- indicates the last TDU sent to this adjacent node."
-
- ::= { ibmappnNnAdjNodeEntry 4 }
-
- ibmappnNnAdjNodeLastFrsnRcvd OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This FRSN
- indicates the last TDU received from this adjacent node."
-
- ::= { ibmappnNnAdjNodeEntry 5 }
-
-
- --APPN Node Topology table
-
- -- This table describes every known APPN Network node
- -- and Virtual node.
-
-
- ibmappnNnTopologyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNnTopologyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Portion of the APPN routing table
- that describes all of the APPN network nodes
- and virtual nodes known to this node."
-
- ::= { ibmappnNnTopology 1 }
-
- ibmappnNnTopologyEntry OBJECT-TYPE
- SYNTAX IbmappnNnTopologyEntry
- ACCESS not-accessible
- STATUS mandatory
-
-
-
- McKenzie & Cheng [Page 62]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- DESCRIPTION
- "The fully-qualified node name is used to
- index this table."
-
- INDEX
- {ibmappnNnNodeName}
-
- ::= { ibmappnNnTopologyTable 1 }
-
- IbmappnNnTopologyEntry ::= SEQUENCE {
-
- ibmappnNnNodeName DisplayString,
- ibmappnNnNodeFrsn INTEGER,
- ibmappnNnNodeEntryTimeLeft INTEGER,
- ibmappnNnNodeType INTEGER,
-
- ibmappnNnNodeRsn INTEGER,
- ibmappnNnNodeRouteAddResist INTEGER,
- ibmappnNnNodeCongested INTEGER,
- ibmappnNnNodeIsrDepleted INTEGER,
- ibmappnNnNodeEndptDepleted INTEGER,
- ibmappnNnNodeQuiescing INTEGER,
- ibmappnNnNodeGateway INTEGER,
- ibmappnNnNodeCentralDirectory INTEGER,
- ibmappnNnNodeIsr INTEGER,
- ibmappnNnNodeChainSupport INTEGER
- }
-
- ibmappnNnNodeName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned network name that is locally
- defined at each network node in the format NETID.CPNAME."
-
- ::= { ibmappnNnTopologyEntry 1 }
-
- ibmappnNnNodeFrsn OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This FRSN
- indicates the last time this resource was updated at
-
-
-
- McKenzie & Cheng [Page 63]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- this node."
-
- ::= { ibmappnNnTopologyEntry 2 }
-
- ibmappnNnNodeEntryTimeLeft OBJECT-TYPE
- SYNTAX INTEGER (0..31)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of days before deletion of this
- network node entry. Range is 0-31."
-
- ::= { ibmappnNnTopologyEntry 3 }
-
- ibmappnNnNodeType OBJECT-TYPE
- SYNTAX INTEGER {
- networknode(1),
- virtualnode(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Type of APPN node."
-
- ::= { ibmappnNnTopologyEntry 4 }
-
- ibmappnNnNodeRsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Resource sequence number that is assigned and
- controlled by the network node that owns this
- resource. This is always an even 32-bit number
- unless an error has occurred."
-
- ::= { ibmappnNnTopologyEntry 5 }
-
- ibmappnNnNodeRouteAddResist OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Route addition resistance
- indicates the relative desirability
- of using this node for intermediate session traffic.
- The value, which can be any integer 0-255,
- is used in route computation. The lower the value,
-
-
-
- McKenzie & Cheng [Page 64]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- the more desirable the node is for intermediate routing."
-
- ::= { ibmappnNnTopologyEntry 6 }
-
- ibmappnNnNodeCongested OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node is congested.
- This node is not be included in route selection
- by other nodes when this congestion exists."
-
- ::= { ibmappnNnTopologyEntry 7 }
-
- ibmappnNnNodeIsrDepleted OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether intermediate session
- routing resources are depleted. This node is
- not included in intermediate route selection
- by other nodes when resources are depleted."
-
- ::= { ibmappnNnTopologyEntry 8 }
-
- ibmappnNnNodeEndptDepleted OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether session endpoint resources are depleted."
-
- ::= { ibmappnNnTopologyEntry 9 }
-
- ibmappnNnNodeQuiescing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is quiescing.
- This node is not included in route selection
- by other nodes when the node is quiescing."
-
- ::= { ibmappnNnTopologyEntry 10 }
-
- ibmappnNnNodeGateway OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 65]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node provide gateway functions."
-
- ::= { ibmappnNnTopologyEntry 11 }
-
- ibmappnNnNodeCentralDirectory OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is central directory."
-
- ::= { ibmappnNnTopologyEntry 12 }
-
- ibmappnNnNodeIsr OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports intermediate session
- routing (ISR)."
-
- ::= { ibmappnNnTopologyEntry 13 }
-
- ibmappnNnNodeChainSupport OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports chaining."
-
- ::= { ibmappnNnTopologyEntry 14 }
-
-
- --APPN transmission group (TG) table
-
- -- This table describes the TGs associated with
- -- the APPN network nodes.
- -- The originating node is repeated here to provide a
- -- means of correlating the TGs with the nodes.
-
-
- ibmappnNnTgTopologyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNnTgTopologyEntry
- ACCESS not-accessible
-
-
-
- McKenzie & Cheng [Page 66]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Portion of the APPN topology database
- that describes all of the APPN transmissions groups
- used by the APPN network nodes."
-
- ::= { ibmappnNnTopology 2 }
-
- ibmappnNnTgTopologyEntry OBJECT-TYPE
- SYNTAX IbmappnNnTgTopologyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table requires three indexes to provide a
- unique index. The indexes are the owning or originating
- CPname, the destination CPname, and the TG number."
-
- INDEX
- {ibmappnNnTgOwner,
- ibmappnNnTgDest,
- ibmappnNnTgNum}
-
- ::= { ibmappnNnTgTopologyTable 1 }
-
- IbmappnNnTgTopologyEntry ::= SEQUENCE {
-
- ibmappnNnTgOwner DisplayString,
- ibmappnNnTgDest DisplayString,
- ibmappnNnTgNum INTEGER,
- ibmappnNnTgFrsn INTEGER,
- ibmappnNnTgEntryTimeLeft INTEGER,
-
- ibmappnNnTgDestVirtual INTEGER,
- ibmappnNnTgDlcData OCTET STRING,
-
- ibmappnNnTgRsn INTEGER,
- ibmappnNnTgOperational INTEGER,
- ibmappnNnTgQuiescing INTEGER,
- ibmappnNnTgCpCpSession INTEGER,
- ibmappnNnTgEffCap INTEGER,
- ibmappnNnTgConnCost INTEGER,
- ibmappnNnTgByteCost INTEGER,
- ibmappnNnTgSecurity INTEGER,
- ibmappnNnTgDelay INTEGER,
- ibmappnNnTgModemClass INTEGER,
- ibmappnNnTgUsr1 INTEGER,
- ibmappnNnTgUsr2 INTEGER,
- ibmappnNnTgUsr3 INTEGER}
-
-
-
- McKenzie & Cheng [Page 67]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnTgOwner OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the
- originating node for this TG. The format
- is NETID.CPNAME and is the same name
- specified in the node table."
-
- ::= { ibmappnNnTgTopologyEntry 1 }
-
- ibmappnNnTgDest OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned fully-qualified
- network name for the destination node for this TG."
-
- ::= { ibmappnNnTgTopologyEntry 2 }
-
- ibmappnNnTgNum OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number associated with this
- transmission group. Range is 0-255."
-
- ::= { ibmappnNnTgTopologyEntry 3 }
-
- ibmappnNnTgFrsn OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This FRSN
- indicates the last time this resource was updated at
- this node."
-
- ::= { ibmappnNnTgTopologyEntry 4 }
-
- ibmappnNnTgEntryTimeLeft OBJECT-TYPE
- SYNTAX INTEGER (0..31)
-
-
-
- McKenzie & Cheng [Page 68]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of days before deletion of this
- network node TG entry. Range is 0-31."
-
- ::= { ibmappnNnTgTopologyEntry 5 }
-
- ibmappnNnTgDestVirtual OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the destination node is
- a virtual node."
-
- ::= { ibmappnNnTgTopologyEntry 6 }
-
- ibmappnNnTgDlcData OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (0..9))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "DLC specific data related to the link connection
- network.
- Token-Ring - MAC/SAP
- X.25 Switched - dial digits
- X.21 Switched - dial digits
- Circuit Swtch - dial digits"
-
- ::= { ibmappnNnTgTopologyEntry 7 }
-
- ibmappnNnTgRsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current owning node's resource sequence number
- for this resource."
-
- ::= { ibmappnNnTgTopologyEntry 8 }
-
- ibmappnNnTgOperational OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the transmission group
-
-
-
- McKenzie & Cheng [Page 69]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- is operational."
-
- ::= { ibmappnNnTgTopologyEntry 9 }
-
- ibmappnNnTgQuiescing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the transmission group
- is quiescing."
-
- ::= { ibmappnNnTgTopologyEntry 10 }
-
- ibmappnNnTgCpCpSession OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether CP-CP sessions are supported on this TG."
-
- ::= { ibmappnNnTgTopologyEntry 11 }
-
-
- ibmappnNnTgEffCap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The effective capacity is an integer value that indicates
- the kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyEntry 12 }
-
- ibmappnNnTgConnCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255, which indicates maximum cost.
- This is an administratively assigned value associated
-
-
-
- McKenzie & Cheng [Page 70]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- with this TG."
-
-
- ::= { ibmappnNnTgTopologyEntry 13 }
-
- ibmappnNnTgByteCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative cost of transmitting a byte over this link.
- Range is from 0 (lowest cost) to 255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyEntry 14 }
-
- ibmappnNnTgSecurity OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The security is represented as an integer with a range of
- 1 thru 255 with the most common values enumerated as
- defined above.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyEntry 15 }
-
- ibmappnNnTgDelay OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 71]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Relative amount of time that it takes for a signal to
- travel the length of the logical link. This time is
- represented in micro seconds, with some of the more
- common values enumerated.
- This is an administratively assigned value associated
- with this TG."
-
-
- ::= { ibmappnNnTgTopologyEntry 16 }
-
- ibmappnNnTgModemClass OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This is used to have multiple images for a
- connection network. For a connection network
- it is the same as in the TG vector; for
- a non-connection network it is X'00'."
-
- ::= { ibmappnNnTgTopologyEntry 17 }
-
- ibmappnNnTgUsr1 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "First user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyEntry 18 }
-
- ibmappnNnTgUsr2 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Second user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyEntry 19 }
-
-
-
-
- McKenzie & Cheng [Page 72]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnTgUsr3 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Third user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyEntry 20 }
-
-
- --APPN Node Topology table (using FRSN as index)
-
- -- This table describes every known APPN Network node
- -- and Virtual node.
-
-
- ibmappnNnTopologyFRTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNnTopologyFREntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Portion of the APPN routing table
- that describes all of the APPN network nodes
- and virtual nodes known to this node."
-
- ::= { ibmappnNnTopology 3 }
-
- ibmappnNnTopologyFREntry OBJECT-TYPE
- SYNTAX IbmappnNnTopologyFREntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by two columns:
- FRSN, followed by fully-qualified node name."
-
- INDEX
- {ibmappnNnNodeFRFrsn,
- ibmappnNnNodeFRName}
-
- ::= { ibmappnNnTopologyFRTable 1 }
-
- IbmappnNnTopologyFREntry ::= SEQUENCE {
- ibmappnNnNodeFRName DisplayString,
- ibmappnNnNodeFRFrsn INTEGER,
- ibmappnNnNodeFREntryTimeLeft INTEGER,
-
-
-
- McKenzie & Cheng [Page 73]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnNodeFRType INTEGER,
-
- ibmappnNnNodeFRRsn INTEGER,
- ibmappnNnNodeFRRouteAddResist INTEGER,
- ibmappnNnNodeFRCongested INTEGER,
- ibmappnNnNodeFRIsrDepleted INTEGER,
- ibmappnNnNodeFREndptDepleted INTEGER,
- ibmappnNnNodeFRQuiescing INTEGER,
- ibmappnNnNodeFRGateway INTEGER,
- ibmappnNnNodeFRCentralDirectory INTEGER,
- ibmappnNnNodeFRIsr INTEGER,
- ibmappnNnNodeFRChainSupport INTEGER
- }
-
- ibmappnNnNodeFRName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned network name that is locally
- defined at each network node in the format NETID.CPNAME."
-
- ::= { ibmappnNnTopologyFREntry 1 }
-
- ibmappnNnNodeFRFrsn OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This FRSN
- indicates the last time this resource was updated at
- this node."
-
- ::= { ibmappnNnTopologyFREntry 2 }
-
- ibmappnNnNodeFREntryTimeLeft OBJECT-TYPE
- SYNTAX INTEGER (0..31)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of days before deletion of this
- network node entry. Range is 0-31."
-
- ::= { ibmappnNnTopologyFREntry 3 }
-
-
-
-
- McKenzie & Cheng [Page 74]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnNodeFRType OBJECT-TYPE
- SYNTAX INTEGER {
- networknode(1),
- virtualnode(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Type of APPN node."
-
- ::= { ibmappnNnTopologyFREntry 4 }
-
- ibmappnNnNodeFRRsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Resource sequence number that is assigned and
- controlled by the network node that owns this
- resource. This is always an even 32-bit number
- unless an error has occurred."
-
- ::= { ibmappnNnTopologyFREntry 5 }
-
- ibmappnNnNodeFRRouteAddResist OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Route addition resistance
- indicates the relative desirability
- of using this node for intermediate session traffic.
- The value, which can be any integer 0-255,
- is used in route computation. The lower the value,
- the more desirable the node is for intermediate routing."
-
- ::= { ibmappnNnTopologyFREntry 6 }
-
- ibmappnNnNodeFRCongested OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node is congested.
- This node is not be included in route selection
- by other nodes when this congestion exists."
-
- ::= { ibmappnNnTopologyFREntry 7 }
-
-
-
- McKenzie & Cheng [Page 75]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnNodeFRIsrDepleted OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether intermediate session
- routing resources are depleted. This node is
- not included in intermediate route selection
- by other nodes when resources are depleted."
-
- ::= { ibmappnNnTopologyFREntry 8 }
-
- ibmappnNnNodeFREndptDepleted OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether session endpoint resources are depleted."
-
- ::= { ibmappnNnTopologyFREntry 9 }
-
- ibmappnNnNodeFRQuiescing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is quiescing.
- This node is not included in route selection
- by other nodes when the node is quiescing."
-
- ::= { ibmappnNnTopologyFREntry 10 }
-
- ibmappnNnNodeFRGateway OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node provide gateway functions."
-
- ::= { ibmappnNnTopologyFREntry 11 }
-
- ibmappnNnNodeFRCentralDirectory OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is central directory."
- ::= { ibmappnNnTopologyFREntry 12 }
-
-
-
- McKenzie & Cheng [Page 76]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnNodeFRIsr OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports intermediate session
- routing (ISR)."
-
- ::= { ibmappnNnTopologyFREntry 13 }
-
- ibmappnNnNodeFRChainSupport OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports chaining."
-
- ::= { ibmappnNnTopologyFREntry 14 }
-
-
- --APPN transmission group (TG) table
-
- -- This table describes the TGs associated with
- -- the APPN network nodes.
- -- The originating node is repeated here to provide a
- -- means of correlating the TGs with the nodes.
-
-
- ibmappnNnTgTopologyFRTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnNnTgTopologyFREntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Portion of the APPN topology database
- that describes all of the APPN transmissions groups
- used by the APPN network nodes."
-
- ::= { ibmappnNnTopology 4 }
-
- ibmappnNnTgTopologyFREntry OBJECT-TYPE
- SYNTAX IbmappnNnTgTopologyFREntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by four columns:
- FRSN, TG owner fully-qualified node name,
- TG destination fully-qualified node name, and TG number."
- INDEX
-
-
-
- McKenzie & Cheng [Page 77]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- {ibmappnNnTgFRFrsn,
- ibmappnNnTgFROwner,
- ibmappnNnTgFRDest,
- ibmappnNnTgFRNum}
-
- ::= { ibmappnNnTgTopologyFRTable 1 }
-
- IbmappnNnTgTopologyFREntry ::= SEQUENCE {
-
- ibmappnNnTgFROwner DisplayString,
- ibmappnNnTgFRDest DisplayString,
- ibmappnNnTgFRNum INTEGER,
- ibmappnNnTgFRFrsn INTEGER,
- ibmappnNnTgFREntryTimeLeft INTEGER,
-
- ibmappnNnTgFRDestVirtual INTEGER,
- ibmappnNnTgFRDlcData OCTET STRING,
-
- ibmappnNnTgFRRsn INTEGER,
- ibmappnNnTgFROperational INTEGER,
- ibmappnNnTgFRQuiescing INTEGER,
- ibmappnNnTgFRCpCpSession INTEGER,
- ibmappnNnTgFREffCap INTEGER,
- ibmappnNnTgFRConnCost INTEGER,
- ibmappnNnTgFRByteCost INTEGER,
- ibmappnNnTgFRSecurity INTEGER,
- ibmappnNnTgFRDelay INTEGER,
- ibmappnNnTgFRModemClass INTEGER,
- ibmappnNnTgFRUsr1 INTEGER,
- ibmappnNnTgFRUsr2 INTEGER,
- ibmappnNnTgFRUsr3 INTEGER}
-
-
- ibmappnNnTgFROwner OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the
- originating node for this TG. The format
- is NETID.CPNAME and is the same name
- specified in the node table."
-
- ::= { ibmappnNnTgTopologyFREntry 1 }
-
- ibmappnNnTgFRDest OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 78]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned fully-qualified
- network name for the destination node for this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 2 }
-
- ibmappnNnTgFRNum OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number associated with this
- transmission group. Range is 0-255."
-
- ::= { ibmappnNnTgTopologyFREntry 3 }
-
- ibmappnNnTgFRFrsn OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This FRSN
- indicates the last time this resource was updated at
- this node."
-
- ::= { ibmappnNnTgTopologyFREntry 4 }
-
- ibmappnNnTgFREntryTimeLeft OBJECT-TYPE
- SYNTAX INTEGER (0..31)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of days before deletion of this
- network node TG entry. Range is 0-31."
-
- ::= { ibmappnNnTgTopologyFREntry 5 }
-
- ibmappnNnTgFRDestVirtual OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the destination node is
- a virtual node."
-
-
-
- McKenzie & Cheng [Page 79]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnNnTgTopologyFREntry 6 }
-
- ibmappnNnTgFRDlcData OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (0..9))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "DLC specific data related to the link connection
- network.
- Token-Ring - MAC/SAP
- X.25 Switched - dial digits
- X.21 Switched - dial digits
- Circuit Swtch - dial digits"
-
- ::= { ibmappnNnTgTopologyFREntry 7 }
-
- ibmappnNnTgFRRsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current owning node's resource sequence number
- for this resource."
-
- ::= { ibmappnNnTgTopologyFREntry 8 }
-
- ibmappnNnTgFROperational OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the transmission group
- is operational."
-
- ::= { ibmappnNnTgTopologyFREntry 9 }
-
- ibmappnNnTgFRQuiescing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the transmission group
- is quiescing."
-
- ::= { ibmappnNnTgTopologyFREntry 10 }
-
- ibmappnNnTgFRCpCpSession OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
-
-
-
- McKenzie & Cheng [Page 80]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether CP-CP sessions are supported on this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 11 }
-
- ibmappnNnTgFREffCap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The effective capacity is an integer value that indicates
- the kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 12 }
-
- ibmappnNnTgFRConnCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255, which indicates maximum cost.
- This is an administratively assigned value associated
- with this TG."
-
-
- ::= { ibmappnNnTgTopologyFREntry 13 }
-
- ibmappnNnTgFRByteCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative cost of transmitting a byte over this link.
- Range is from 0 (lowest cost) to 255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 14 }
-
-
-
-
- McKenzie & Cheng [Page 81]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnNnTgFRSecurity OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The security is represented as an integer with a range of
- 1 thru 255 with the most common values enumerated as
- defined above.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 15 }
-
- ibmappnNnTgFRDelay OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative amount of time that it takes for a signal to
- travel the length of the logical link. This time is
- represented in micro seconds, with some of the more
- common values enumerated.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 16 }
-
- ibmappnNnTgFRModemClass OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This is used to have multiple images for a
-
-
-
- McKenzie & Cheng [Page 82]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- connection network. For a connection network
- it is the same as in the TG vector; for
- a non-connection network it is X'00'."
-
- ::= { ibmappnNnTgTopologyFREntry 17 }
-
- ibmappnNnTgFRUsr1 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "First user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 18 }
-
- ibmappnNnTgFRUsr2 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Second user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 19 }
-
- ibmappnNnTgFRUsr3 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Third user-defined TG characteristic for this TG with
- a range of 0-255.
- This is an administratively assigned value associated
- with this TG."
-
- ::= { ibmappnNnTgTopologyFREntry 20 }
-
-
- -- ************** The APPN Local Topology Group *****************
-
- ibmappnLocalTopology OBJECT IDENTIFIER ::= { ibmappn 3 }
- ibmappnLocalThisNode OBJECT IDENTIFIER ::= { ibmappnLocalTopology 1 }
- ibmappnLocalGeneral OBJECT IDENTIFIER ::= { ibmappnLocalThisNode 1}
-
-
-
- McKenzie & Cheng [Page 83]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnLocalNnSpecific OBJECT IDENTIFIER ::= { ibmappnLocalThisNode 2}
- ibmappnLocalTg OBJECT IDENTIFIER ::= { ibmappnLocalThisNode 3}
- ibmappnLocalEnTopology OBJECT IDENTIFIER ::= { ibmappnLocalTopology 2 }
-
- -- The LocalEnNodeTable and LocalEnTgTable will replace these OIs
- --ibmappnLocalEnNode OBJECT IDENTIFIER ::= { ibmappnLocalEnTopology 1}
- --ibmappnLocalEnTg OBJECT IDENTIFIER ::= { ibmappnLocalEnTopology 2}
-
-
- --This MIB Group represents the local topology
- --maintained in both APPN end nodes and network nodes.
- --Although the same control vectors are used for both network
- --and local topology, many of the attributes only apply to network
- --nodes. This MIB group defines the required objects for retrieval
- --of information about this node and the objects that represent
- --the local topology about end nodes.
- --
- --This node could be either an network node or an end node. The
- --definition must address both cases.
- --
- --1 Information about this node
- -- a General information about this node, both NN and ENs.
- -- b Information about this node that applies only to NNs.
- -- c TG table (repeated for each TG this node owns)
- --
- --2 Information about the end nodes known to this network node
- -- (THIS SECTION ONLY APPLIES TO NETWORK NODES)
- -- a End node table (entry for each end node )
- -- b TG table (repeated for each TG owned by the end nodes)
- --
- --
-
-
-
- ----
- -- General information section
-
- ibmappnLocalNodeName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned fully-qualified name
- for this node. Format is NETID.CPNAME."
-
- ::= { ibmappnLocalGeneral 1 }
-
- ibmappnLocalNodeType OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 84]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER {
- networknode(1),
- endnode(2),
- len(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Type of APPN node."
-
- ::= { ibmappnLocalGeneral 2 }
-
-
- -- Network node unique information
- --
-
- ibmappnLocalNnRsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Resource sequence number is assigned and
- controlled by the network node that owns this
- resource. This is always an even unsigned
- number unless an error has occurred."
-
- ::= { ibmappnLocalNnSpecific 1 }
-
- ibmappnLocalNnRouteAddResist OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Route addition resistance
- indicates the relative desirability
- of using this node for intermediate session traffic.
- The value, which can be any integer 0-255,
- is used in route computation. The lower the value,
- the more desirable the node is for intermediate routing."
-
- ::= { ibmappnLocalNnSpecific 2 }
-
- ibmappnLocalNnCongested OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this node is congested.
-
-
-
- McKenzie & Cheng [Page 85]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- Other network nodes stop routing traffic to
- this node while this flag is on."
-
- ::= { ibmappnLocalNnSpecific 3 }
-
- ibmappnLocalNnIsrDepleted OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicate whether intermediated session
- routing resources are depleted.
- Other network nodes stop routing traffic through
- this node while this flag is on."
-
- ::= { ibmappnLocalNnSpecific 4 }
-
- ibmappnLocalNnEndptDepleted OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether session endpoint resources
- are depleted."
-
- ::= { ibmappnLocalNnSpecific 5 }
-
- ibmappnLocalNnQuiescing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is quiescing."
-
- ::= { ibmappnLocalNnSpecific 6 }
-
- ibmappnLocalNnGateway OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is a gateway."
-
- ::= { ibmappnLocalNnSpecific 7 }
-
- ibmappnLocalNnCentralDirectory OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 86]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node is a central directory."
-
- ::= { ibmappnLocalNnSpecific 8 }
-
- ibmappnLocalNnIsr OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports intermediate
- session routing."
-
- ::= { ibmappnLocalNnSpecific 9 }
-
- ibmappnLocalNnChainSupport OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the node supports chaining."
-
- ::= { ibmappnLocalNnSpecific 10 }
-
- ibmappnLocalNnFrsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Flow reduction sequence numbers (FRSNs) are associated
- with Topology Database Updates (TDUs) and are unique
- only within each APPN network node. A TDU can be
- associated with multiple APPN resources. This object
- is the last FRSN sent in a topology update to
- adjacent network nodes."
-
- ::= { ibmappnLocalNnSpecific 11 }
-
-
- -- Local TG information
- -- APPN Transmission Group (TG) Table
-
- -- This table describes the TGs associated with
- -- this node only.
-
- ibmappnLocalTgTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnLocalTgEntry
-
-
-
- McKenzie & Cheng [Page 87]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "TG Table describes all of the TGs owned by this
- node. The TG destination can be a virtual
- node, network node, len, or end node."
-
- ::= { ibmappnLocalTg 1 }
-
- ibmappnLocalTgEntry OBJECT-TYPE
- SYNTAX IbmappnLocalTgEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by the destination CPname
- and the TG number."
-
- INDEX
- {ibmappnLocalTgDest,
- ibmappnLocalTgNum}
-
- ::= { ibmappnLocalTgTable 1 }
-
- IbmappnLocalTgEntry ::= SEQUENCE {
-
- ibmappnLocalTgDest DisplayString,
- ibmappnLocalTgNum INTEGER,
- ibmappnLocalTgDestVirtual INTEGER,
- ibmappnLocalTgDlcData OCTET STRING,
-
- ibmappnLocalTgRsn INTEGER,
- ibmappnLocalTgQuiescing INTEGER,
- ibmappnLocalTgOperational INTEGER,
- ibmappnLocalTgCpCpSession INTEGER,
- ibmappnLocalTgEffCap INTEGER,
- ibmappnLocalTgConnCost INTEGER,
- ibmappnLocalTgByteCost INTEGER,
- ibmappnLocalTgSecurity INTEGER,
- ibmappnLocalTgDelay INTEGER,
- ibmappnLocalTgModemClass INTEGER,
- ibmappnLocalTgUsr1 INTEGER,
- ibmappnLocalTgUsr2 INTEGER,
- ibmappnLocalTgUsr3 INTEGER
- }
-
- ibmappnLocalTgDest OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 88]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the
- destination node for this TG.
- This is the fully-qualified network node
- name."
-
- ::= { ibmappnLocalTgEntry 1 }
-
- ibmappnLocalTgNum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number associated with this transmission group."
-
- ::= { ibmappnLocalTgEntry 2 }
-
- ibmappnLocalTgDestVirtual OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the destination node is
- a Virtual node."
- ::= { ibmappnLocalTgEntry 3 }
-
- ibmappnLocalTgDlcData OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (0..9))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "DLC specific data related to the link connection
- network.
- Token-Ring - MAC/SAP
- X.25 Switched - dial digits
- X.21 Switched - dial digits
- Circuit Swtch - dial digits"
-
- ::= { ibmappnLocalTgEntry 4 }
-
- ibmappnLocalTgRsn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The resource sequence number is assigned and
- controlled by the network node that owns this
-
-
-
- McKenzie & Cheng [Page 89]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- resource. This is always an even unsigned
- number unless an error has occurred."
-
- ::= { ibmappnLocalTgEntry 5 }
-
- ibmappnLocalTgQuiescing OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the Transmission Group
- is quiescing."
-
- ::= { ibmappnLocalTgEntry 6 }
-
- ibmappnLocalTgOperational OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the Transmission Group
- is operational."
-
- ::= { ibmappnLocalTgEntry 7 }
-
- ibmappnLocalTgCpCpSession OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the CP-CP Sessions are
- supported on this TG."
-
- ::= { ibmappnLocalTgEntry 8 }
-
- ibmappnLocalTgEffCap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The effective capacity is an integer value that indicates
- the actual kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776."
-
- ::= { ibmappnLocalTgEntry 9 }
-
- ibmappnLocalTgConnCost OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 90]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255."
-
- ::= { ibmappnLocalTgEntry 10 }
-
- ibmappnLocalTgByteCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative cost of transmitting a byte over this link.
- Range is from 0 (lowest cost) to 255."
-
- ::= { ibmappnLocalTgEntry 11 }
-
- ibmappnLocalTgSecurity OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Security level for this TG."
-
- ::= { ibmappnLocalTgEntry 12 }
-
- ibmappnLocalTgDelay OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 91]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Relative amount of time that it takes for a signal to
- travel the length of the logical link. This time is
- represented in micro seconds, with some of the more
- common values enumerated."
-
- ::= { ibmappnLocalTgEntry 13 }
-
- ibmappnLocalTgModemClass OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This is used to have multiple images for a
- connection network. For a connection network
- it is the same as in the TG vector and for
- a non-connection network it is zero."
-
- ::= { ibmappnLocalTgEntry 14 }
-
- ibmappnLocalTgUsr1 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Value of the first user-defined TG
- characteristic for this TG.
- Range is 0-255."
-
- ::= { ibmappnLocalTgEntry 15 }
-
- ibmappnLocalTgUsr2 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Value of the second user-defined TG
- characteristic for this TG.
- Range is 0-255."
-
- ::= { ibmappnLocalTgEntry 16 }
-
- ibmappnLocalTgUsr3 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
-
-
-
- McKenzie & Cheng [Page 92]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- "Value of the third user-defined TG
- characteristic for this TG.
- Range is 0-255."
-
- ::= { ibmappnLocalTgEntry 17 }
-
-
- -- This section applies only to network nodes.
- -- It contains end node topology information known to serving
- -- network node.
- -- The first table contains information about all end nodes
- -- known to this node.
- --
- -- The TG table contains information about all of the TGs owned
- -- by these end nodes.
-
-
- ibmappnLocalEnTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnLocalEnEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Portion of the APPN topology
- database that describes the end
- nodes known to this node."
-
- ::= { ibmappnLocalEnTopology 1 }
-
- ibmappnLocalEnEntry OBJECT-TYPE
- SYNTAX IbmappnLocalEnEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by the end node CPname."
-
- INDEX
- {ibmappnLocalEnName}
- ::= { ibmappnLocalEnTable 1 }
-
- IbmappnLocalEnEntry ::= SEQUENCE {
-
- ibmappnLocalEnName DisplayString,
- ibmappnLocalEnEntryTimeLeft INTEGER,
- ibmappnLocalEnType INTEGER
- }
-
- ibmappnLocalEnName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
-
-
-
- McKenzie & Cheng [Page 93]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned fully-qualified
- name of end node in the format NETID.CPNAME."
-
- ::= { ibmappnLocalEnEntry 1 }
-
- ibmappnLocalEnEntryTimeLeft OBJECT-TYPE
- SYNTAX INTEGER (0..31)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of days before deletion of this
- end node entry. Range is 0-31."
-
- ::= { ibmappnLocalEnEntry 2 }
-
- ibmappnLocalEnType OBJECT-TYPE
- SYNTAX INTEGER {
- endnode(2),
- len(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Type of APPN node (must always be a len or end node)."
-
- ::= { ibmappnLocalEnEntry 3 }
-
-
- --APPN Local End node Transmission Group (TG) table
-
- -- This table describes the TGs associated with
- -- all of the end nodes known to this node.
-
- ibmappnLocalEnTgTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnLocalEnTgEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Table describing all of the TGs owned by the
- end nodes known to this node.
- The TG destination can be a virtual
- node, network node, or end node."
-
- ::= { ibmappnLocalEnTopology 2 }
-
-
-
-
- McKenzie & Cheng [Page 94]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnLocalEnTgEntry OBJECT-TYPE
- SYNTAX IbmappnLocalEnTgEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table requires multiple indexes to uniquely
- identify each TG. They are originating CPname,
- destination CPname, and the TG number."
-
- INDEX
- {ibmappnLocalEnTgOrigin,
- ibmappnLocalEnTgDest,
- ibmappnLocalEnTgNum}
-
- ::= { ibmappnLocalEnTgTable 1 }
-
- IbmappnLocalEnTgEntry ::= SEQUENCE {
- ibmappnLocalEnTgOrigin DisplayString,
- ibmappnLocalEnTgDest DisplayString,
- ibmappnLocalEnTgNum INTEGER,
- ibmappnLocalEnTgEntryTimeLeft INTEGER,
-
- ibmappnLocalEnTgDestVirtual INTEGER,
- ibmappnLocalEnTgDlcData OCTET STRING,
-
- ibmappnLocalEnTgOperational INTEGER,
- ibmappnLocalEnTgCpCpSession INTEGER,
- ibmappnLocalEnTgEffCap INTEGER,
- ibmappnLocalEnTgConnCost INTEGER,
- ibmappnLocalEnTgByteCost INTEGER,
- ibmappnLocalEnTgSecurity INTEGER,
- ibmappnLocalEnTgDelay INTEGER,
- ibmappnLocalEnTgModemClass INTEGER,
- ibmappnLocalEnTgUsr1 INTEGER,
- ibmappnLocalEnTgUsr2 INTEGER,
- ibmappnLocalEnTgUsr3 INTEGER
- }
-
- ibmappnLocalEnTgOrigin OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the
- origination node for this TG.
- This is the fully-qualified network name."
-
- ::= { ibmappnLocalEnTgEntry 1 }
-
-
-
- McKenzie & Cheng [Page 95]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnLocalEnTgDest OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for the
- destination node for this TG.
- This is the fully-qualified network name."
-
- ::= { ibmappnLocalEnTgEntry 2 }
-
- ibmappnLocalEnTgNum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number associated with this transmission group."
-
- ::= { ibmappnLocalEnTgEntry 3 }
-
- ibmappnLocalEnTgEntryTimeLeft OBJECT-TYPE
- SYNTAX INTEGER (0..31)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of days before deletion of this
- end node TG entry. Range is 0-31."
-
- ::= { ibmappnLocalEnTgEntry 4 }
-
- ibmappnLocalEnTgDestVirtual OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the destination node is
- a virtual node."
-
- ::= { ibmappnLocalEnTgEntry 5 }
-
- ibmappnLocalEnTgDlcData OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "DLC specific data related to the link connection
- network.
- Token-Ring - MAC/SAP
-
-
-
- McKenzie & Cheng [Page 96]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- X.25 Switched - dial digits
- X.21 Switched - dial digits
- Circuit Swtch - dial digits"
-
- ::= { ibmappnLocalEnTgEntry 6 }
-
- ibmappnLocalEnTgOperational OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the Transmission Group is operational."
-
- ::= { ibmappnLocalEnTgEntry 7 }
-
- ibmappnLocalEnTgCpCpSession OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether CP-CP sessions are supported on this TG."
-
- ::= { ibmappnLocalEnTgEntry 8 }
-
- ibmappnLocalEnTgEffCap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The effective capacity is an integer value that indicates
- the actual kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776."
-
- ::= { ibmappnLocalEnTgEntry 9 }
-
- ibmappnLocalEnTgConnCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255."
-
- ::= { ibmappnLocalEnTgEntry 10 }
-
-
-
-
- McKenzie & Cheng [Page 97]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnLocalEnTgByteCost OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative cost of transmitting a byte over this link.
- Range is from 0, which means no cost, to 255."
-
- ::= { ibmappnLocalEnTgEntry 11 }
-
- ibmappnLocalEnTgSecurity OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Security level for this TG."
-
- ::= { ibmappnLocalEnTgEntry 12 }
-
- ibmappnLocalEnTgDelay OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Relative amount of time that it takes for a signal to
- travel the length of the logical link. This time is
- represented in micro seconds, with some of the more
- common values enumerated."
-
- ::= { ibmappnLocalEnTgEntry 13 }
-
- ibmappnLocalEnTgModemClass OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
-
-
-
- McKenzie & Cheng [Page 98]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This is used to have multiple images for a
- connection network. For a connection network
- it is the same as in the TG vector and for
- a non connection network it is zero."
-
- ::= { ibmappnLocalEnTgEntry 14 }
-
- ibmappnLocalEnTgUsr1 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "First user-defined TG characteristic
- for this TG. Range of values is 0-255."
-
- ::= { ibmappnLocalEnTgEntry 15 }
-
- ibmappnLocalEnTgUsr2 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Second user-defined TG characteristic
- for this TG. Range of values is 0-255."
-
- ::= { ibmappnLocalEnTgEntry 16 }
-
- ibmappnLocalEnTgUsr3 OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Third user-defined TG characteristic
- for this TG. Range of values is 0-255."
-
- ::= { ibmappnLocalEnTgEntry 17 }
-
-
- -- ************** The APPN Directory group **********************
- ibmappnDir OBJECT IDENTIFIER ::= { ibmappn 5 }
- ibmappnDirPerf OBJECT IDENTIFIER ::= { ibmappnDir 1 }
-
- -- The APPN Directory Group
-
- -- The APPN Directory Database
-
-
-
- McKenzie & Cheng [Page 99]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- Each APPN network node maintains directories containing
- -- information on which LUs (applications) are available and
- -- where they are located. LUs can be located within an APPN
- -- network node or in any of the attached end nodes.
-
- -- Max Cache Directory Entries
- -- Current Number of Cache Entries
- -- Current Number Home Entries
- -- Current Number of Registered Entries
- -- number of directed locates sent
- -- number of directed locates received
- -- number of broadcast locates sent
- -- number of broadcast locates received
- -- Number of locates returned with a found
- -- Number of locates returned with a not found
- -- Number of outstanding Locates
- -- Directory table (Repeated for each Serving NN)
-
- -- Serving Network Node Fully Qualified CP Name
-
- -- LU Groups within Directory table (one for each LU)
-
- -- Fully-qualified LU Name
- -- Owning fully-qualified CP Name
- -- TP Name
- -- Resource location (local/domain/cross-domain)
- -- Entry type (home,Register/cache)
- -- Wildcard (yes/no)
-
-
- ibmappnDirMaxCaches OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum number of cache entries allowed. This
- is an administratively assigned value."
-
- ::= { ibmappnDirPerf 1 }
-
- ibmappnDirCurCaches OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current number of cache entries."
-
- ::= { ibmappnDirPerf 2 }
-
-
-
- McKenzie & Cheng [Page 100]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnDirCurHomeEntries OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current number of home entries."
-
- ::= { ibmappnDirPerf 3 }
-
- ibmappnDirRegEntries OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current number of registered entries."
-
- ::= { ibmappnDirPerf 4 }
-
- ibmappnDirInLocates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of directed locates received."
-
- ::= { ibmappnDirPerf 5 }
-
- ibmappnDirInBcastLocates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of broadcast locates received."
-
- ::= { ibmappnDirPerf 6 }
-
- ibmappnDirOutLocates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of directed locates sent."
-
- ::= { ibmappnDirPerf 7 }
-
- ibmappnDirOutBcastLocates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 101]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "Number of broadcast locates sent."
-
- ::= { ibmappnDirPerf 8 }
-
- ibmappnDirNotFoundLocates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of directed locates returned with a 'not found'."
-
- ::= { ibmappnDirPerf 9 }
-
- ibmappnDirNotFoundBcastLocates OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of broadcast locates returned with
- a not found."
-
- ::= { ibmappnDirPerf 10 }
-
- ibmappnDirLocateOutstands OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current number of outstanding locates,
- both directed and broadcast. This value
- varies. A value of zero indicates
- that no locates are unanswered."
-
- ::= { ibmappnDirPerf 11 }
-
-
- --APPN Directory table
-
- -- This table contains information about all known
- -- LUs and TPs.
-
- ibmappnDirTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnDirEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
-
-
-
- McKenzie & Cheng [Page 102]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- "Table containing information about
- all known LUs and TPs."
-
- ::= { ibmappnDir 2 }
-
- ibmappnDirEntry OBJECT-TYPE
- SYNTAX IbmappnDirEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by the LU name."
-
- INDEX
- {ibmappnDirLuName}
-
- ::= { ibmappnDirTable 1 }
-
- IbmappnDirEntry ::= SEQUENCE {
- ibmappnDirLuName DisplayString,
- ibmappnDirServerName DisplayString,
- ibmappnDirLuOwnerName DisplayString,
- ibmappnDirLuLocation INTEGER,
- ibmappnDirType INTEGER,
- ibmappnDirWildCard INTEGER
- }
-
- ibmappnDirLuName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Fully-qualified network LU name in the
- domain of the serving network node."
-
- ::= { ibmappnDirEntry 1 }
-
- ibmappnDirServerName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Fully-qualified control point (CP) name of the
- network node server. For unassociated end node
- entries, the end node fully-qualified name
- is returned."
-
- ::= { ibmappnDirEntry 2 }
-
-
-
-
- McKenzie & Cheng [Page 103]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnDirLuOwnerName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (3..17))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Fully-qualified CP name of the node at which
- the LU is located. This name is the same as the
- serving NN name when the LU is located at a
- network node or an unassociated end node. It is
- also the same as the fully-qualified LU name
- when this is the control point LU for this node."
-
- ::= { ibmappnDirEntry 3 }
-
-
- ibmappnDirLuLocation OBJECT-TYPE
- SYNTAX INTEGER {
- local(1), --Local
- domain(2), --Domain
- xdomain(3) --Cross Domain
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Specifies the location of the LU."
-
- ::= { ibmappnDirEntry 4 }
-
- ibmappnDirType OBJECT-TYPE
- SYNTAX INTEGER {
- home(1), --defined as home entry
- cache(2), --learned over time
- registered(3) --registered by end node
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Directory types are:
- 1 - Home
- The LU is in the domain of the local network node
- and the LU information has been configured at the
- local node.
-
- 2 - Cache
- The LU has previously been located by a broadcast
- search and the location information has been saved.
-
- 3 - Register
-
-
-
- McKenzie & Cheng [Page 104]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- The LU is at an end node that is in the domain
- of the local network node. Registered entries
- are registered by the served end node."
-
- ::= { ibmappnDirEntry 5 }
-
-
- ibmappnDirWildCard OBJECT-TYPE
- SYNTAX INTEGER {
- other(1),
- explicit-entry(2),
- partial-wildcard(3),
- full-wildcard(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "1 - Other means unknown type of LU entry.
- 2 - Expliced-entry means the full LUNAME will be used
- for locating this LU.
- 3 - Partial-wildcard means only the non-blank portions
- of the LUNAME will be used for locating this LU.
- 4 - Full-wildcard means all LUNAMES will be directed
- to this LU."
-
- ::= { ibmappnDirEntry 6 }
-
-
- -- ************** The APPN Class of Service group ***************
-
- ibmappnCos OBJECT IDENTIFIER ::= { ibmappn 6 } --APPN COS
-
- -- The APPN Class of Service (COS)
-
- -- Class of Service is a means of expressing the quality of the routes
- -- and the transmission priority of traffic which flows on these routes.
- -- The quality of routes is specified by two tables, a COS weight table
- -- for TGs and a COS weight table for nodes. These COS tables are
- -- administratively assigned at each APPN node. Seven default tables
-
- -- for TGs and a COS weight table for Nodes. These COS tables are
- -- administratively assigned at each APPN node with seven default tables
- -- being provided by IBM.
- --
- --
- -- COS Name
- -- Unqualified name identifying the class of service.
- -- Transmission priority
-
-
-
- McKenzie & Cheng [Page 105]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- Transmission priority associated with this class of service
- -- COS Node Row Table
- -- At least one node row must be specified. The default
- -- COS tables specify 8 rows.
- -- Node Row Weight
- -- Numeric value between 0 and 255 inclusive indicating
- -- the weight associated with this row.
- -- Route addition resist (min)
- -- Numeric value between 0 and 255 inclusive indicating
- -- the minimum route addition resistance for this row.
- -- Route addition resist (max)
- -- Numeric value between 0 and 255 inclusive indicating
- -- the maximum route addition resistance for this row.
- -- Congestion (min)
- -- Indicates whether this class of service for this row
- -- will accept congestion. Yes or No must be specified.
- -- Congestion (max)
- -- Indicates whether this Class of Service for this row
- -- will accept congestion. Yes or No must be specified.
- --
- -- COS TG Row table
- -- At least one TG row must be specified with the defaults
- -- COS tables specify 8 rows.
- -- TG Row Weight
- -- Numeric value between 0 and 255 inclusive indicating
- -- the weight associated with this row.
- -- Effective capacity (min)
- -- Indicates the lowest acceptable value for this row.
- -- Effective capacity (max)
- -- Indicates the highest required value for this row.
- -- Cost per connect time (min)
- -- Indicates the lowest connect cost per unit time value
- -- for this row. This value is between 0 and 255 inclusive.
- -- Cost per connect time (max)
- -- Indicates the highest connect cost per unit time value
- -- for this row. This value is between 0 and 255 inclusive.
- -- Cost per byte (min)
- -- Indicates the lowest cost per byte value
- -- for this row. This value is between 0 and 255 inclusive.
- -- Cost per byte (max)
- -- Indicates the highest cost per byte value
- -- for this row. This value is between 0 and 255 inclusive.
- -- Security (min)
- -- Indicates the lowest acceptable value for security
- -- for this row. This value is one of seven values.
- -- Security (max)
- -- Indicates the highest acceptable value for security
- -- for this row. This value is one of seven values.
-
-
-
- McKenzie & Cheng [Page 106]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- Propagation delay (min)
- -- Indicates the lowest acceptable propagation delay value
- -- for this row.
- -- Propagation delay (max)
- -- Indicates the highest acceptable propagation delay value
- -- for this row.
- -- User defined 1 (min)
- -- Indicates the lowest acceptable value
- -- for this row. This value is between 0 and 255 inclusive.
- -- User defined 1 (max)
- -- Indicates the highest acceptable value
- -- for this row. This value is between 0 and 255 inclusive.
- -- User defined 2 (min)
- -- Same as user defined 1
- -- User defined 2 (max)
- -- Same as user defined 1
- -- User defined 3 (min)
- -- Same as user defined 1
- -- User defined 3 (max)
- -- Same as user defined 1
- --
- --
- --
- --Due to SNMP ASN.1 limitations the COS table is defined
- --in the following format.
- --
- -- MODE name table
- -- MODE Name (index)
- -- COS Name
- --
- -- COS name table
- -- COS Name (index)
- -- Transmission priority
- --
- -- COS node row table
- -- COS Name (index1)
- -- Index2
- -- Node Row Weight
- -- Rte addition resist (min)
- -- Rte addition resist (max)
- -- Congestion (min)
- -- Congestion (max)
- --
- -- COS TG row table
- -- COS Name (index1)
- -- Index
- -- TG Row Weight
- -- Effective capacity (min)
-
-
-
- McKenzie & Cheng [Page 107]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- -- Effective capacity (max)
- -- Cost per conn time (min)
- -- Cost per conn time (max)
- -- cost per byte (min)
- -- cost per byte (max)
- -- Security (min)
- -- Security (max)
- -- Propagation delay (min)
- -- Propagation delay (max)
- -- User defined 1 (min)
- -- User defined 1 (max)
- -- User defined 2 (min)
- -- User defined 2 (max)
- -- User defined 3 (min)
- -- User defined 3 (max)
- --
- -- **************************************************************
-
-
- ibmappnCosModeTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnCosModeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Table representing all of the defined
- mode names for this node. The table
- contains the matching COS name."
-
- ::= { ibmappnCos 1 }
-
- ibmappnCosModeEntry OBJECT-TYPE
- SYNTAX IbmappnCosModeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table is indexed by the Mode Name."
-
- INDEX
- {ibmappnCosModeName}
-
- ::= { ibmappnCosModeTable 1 }
-
- IbmappnCosModeEntry ::= SEQUENCE {
- ibmappnCosModeName DisplayString,
- ibmappnCosModeCosName DisplayString
- }
-
- ibmappnCosModeName OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 108]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this
- mode entry."
-
- ::= { ibmappnCosModeEntry 1 }
-
- ibmappnCosModeCosName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An administratively assigned name for this
- Class of Service."
-
- ::= { ibmappnCosModeEntry 2 }
-
-
- -- **************************************************************
-
- ibmappnCosNameTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnCosNameEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Table representing all of the defined class-of-service
- names for this node. The COS node and TG tables are
- accessed using the same index, which is the COS name."
-
- ::= { ibmappnCos 2 }
-
- ibmappnCosNameEntry OBJECT-TYPE
- SYNTAX IbmappnCosNameEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The COS name is the index to this table."
-
- INDEX
- {ibmappnCosName}
-
- ::= { ibmappnCosNameTable 1 }
-
- IbmappnCosNameEntry ::= SEQUENCE {
- ibmappnCosName DisplayString,
- ibmappnCosTransPriority INTEGER
-
-
-
- McKenzie & Cheng [Page 109]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- }
-
-
- ibmappnCosName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this
- class of service."
-
- ::= { ibmappnCosNameEntry 1 }
-
- ibmappnCosTransPriority OBJECT-TYPE
- SYNTAX INTEGER {
- low(1), --X'01'
- medium(2), --X'02'
- high(3), --X'03'
- network(4) --X'04'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Transmission priority for this
- class of service. Values are:
- Low
- Medium
- High
- Network "
-
- ::= { ibmappnCosNameEntry 2 }
-
-
- ibmappnCosNodeRowTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnCosNodeRowEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "This table contains all node-row information for all
- class of service in this node."
-
- ::= { ibmappnCos 3 }
-
- ibmappnCosNodeRowEntry OBJECT-TYPE
- SYNTAX IbmappnCosNodeRowEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
-
-
-
- McKenzie & Cheng [Page 110]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- "The COS name is the first index and a integer
- is the second index to insure a unique index."
-
- INDEX
- {ibmappnCosNodeRowName,
- ibmappnCosNodeRowIndex}
-
- ::= { ibmappnCosNodeRowTable 1 }
-
- IbmappnCosNodeRowEntry ::= SEQUENCE {
- ibmappnCosNodeRowName DisplayString,
- ibmappnCosNodeRowIndex INTEGER,
- --Node Row Group
- ibmappnCosNodeRowWgt DisplayString,
- ibmappnCosNodeRowResistMin INTEGER,
- ibmappnCosNodeRowResistMax INTEGER,
- ibmappnCosNodeRowMinCongestAllow INTEGER,
- ibmappnCosNodeRowMaxCongestAllow INTEGER
- }
-
- ibmappnCosNodeRowName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this
- class of service."
-
- ::= { ibmappnCosNodeRowEntry 1 }
-
- ibmappnCosNodeRowIndex OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of COS name. This same value is used
- to access the node and TG COS tables.
- Range of values is 0-255."
-
- ::= { ibmappnCosNodeRowEntry 2 }
-
- --Node Row Group
-
- ibmappnCosNodeRowWgt OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
-
-
-
- McKenzie & Cheng [Page 111]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- "Weight to be associated with the nodes
- that fit the criteria specified by this node row."
-
- ::= { ibmappnCosNodeRowEntry 3 }
-
- ibmappnCosNodeRowResistMin OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum route addition resistance value
- for this node. Range of values is 0-255.
- The lower the value, the more desirable
- the node is for intermediate routing."
-
- ::= { ibmappnCosNodeRowEntry 4 }
-
- ibmappnCosNodeRowResistMax OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum route addition resistance value
- for this node. Range of values is 0-255.
- The lower the value, the more desirable
- the node is for intermediate routing."
-
- ::= { ibmappnCosNodeRowEntry 5 }
-
- ibmappnCosNodeRowMinCongestAllow OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether low congestion will be
- tolerated. The minimum and maximum parameters
- will allow specifying either low-congested,
- high-congested, or either to be used."
-
- ::= { ibmappnCosNodeRowEntry 6 }
-
- ibmappnCosNodeRowMaxCongestAllow OBJECT-TYPE
- SYNTAX INTEGER {yes(1), no(2)}
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether high congestion will be
- tolerated. The minimum and maximum parameters
-
-
-
- McKenzie & Cheng [Page 112]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- will allow specifying either low-congested,
- high-congested, or either to be used."
-
- ::= { ibmappnCosNodeRowEntry 7 }
-
-
- -- COS TG row table
- -- Index
- -- TG Row Weight
- -- Effective capacity (min)
- -- Effective capacity (max)
- -- Cost per conn time (min)
- -- Cost per conn time (max)
- -- cost per byte (min)
- -- cost per byte (max)
- -- Security (min)
- -- Security (max)
- -- Propagation delay (min)
- -- Propagation delay (max)
- -- User defined 1 (min)
- -- User defined 1 (max)
- -- User defined 2 (min)
- -- User defined 2 (max)
- -- User defined 3 (min)
- -- User defined 3 (max)
- --
-
- ibmappnCosTgRowTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IbmappnCosTgRowEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Table containing all the Tg-row information for all
- class of service defined in this node."
-
- ::= { ibmappnCos 4 }
-
- ibmappnCosTgRowEntry OBJECT-TYPE
- SYNTAX IbmappnCosTgRowEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The TgRowName and the TgRowIndex are the index
- for this table."
-
- INDEX
- {ibmappnCosTgRowName,
- ibmappnCosTgRowIndex}
-
-
-
- McKenzie & Cheng [Page 113]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ::= { ibmappnCosTgRowTable 1 }
-
- IbmappnCosTgRowEntry ::= SEQUENCE {
- ibmappnCosTgRowName DisplayString,
- ibmappnCosTgRowIndex INTEGER,
- --TG Row Group
- ibmappnCosTgRowWgt DisplayString,
- ibmappnCosTgRowEffCapMin INTEGER,
- ibmappnCosTgRowEffCapMax INTEGER,
- ibmappnCosTgRowConnCostMin INTEGER,
- ibmappnCosTgRowConnCostMax INTEGER,
- ibmappnCosTgRowByteCostMin INTEGER,
- ibmappnCosTgRowByteCostMax INTEGER,
- ibmappnCosTgRowSecurityMin INTEGER,
- ibmappnCosTgRowSecurityMax INTEGER,
- ibmappnCosTgRowDelayMin INTEGER,
- ibmappnCosTgRowDelayMax INTEGER,
- ibmappnCosTgRowUsr1Min INTEGER,
- ibmappnCosTgRowUsr1Max INTEGER,
- ibmappnCosTgRowUsr2Min INTEGER,
- ibmappnCosTgRowUsr2Max INTEGER,
- ibmappnCosTgRowUsr3Min INTEGER,
- ibmappnCosTgRowUsr3Max INTEGER
- }
-
- ibmappnCosTgRowName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Administratively-assigned name for this
- class of service."
-
- ::= { ibmappnCosTgRowEntry 1 }
-
- ibmappnCosTgRowIndex OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of COS name. This same value is used
- to access the node and TG COS tables."
-
- ::= { ibmappnCosTgRowEntry 2 }
-
- --TG Row
-
- ibmappnCosTgRowWgt OBJECT-TYPE
-
-
-
- McKenzie & Cheng [Page 114]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Weight to be associated with the nodes
- that fit the criteria specified by this tg-row."
-
- ::= { ibmappnCosTgRowEntry 3 }
-
- ibmappnCosTgRowEffCapMin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable speed for this Class of Service.
- The effective capacity is an integer value that indicates
- the actual kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776."
-
- ::= { ibmappnCosTgRowEntry 4 }
-
- ibmappnCosTgRowEffCapMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable speed for this Class of Service.
- The effective capacity is an integer value that indicates
- the actual kilo bits per second.
- It is derived from the link bandwidth and maximum load
- factor with the range of 0 thru 603,979,776."
-
- ::= { ibmappnCosTgRowEntry 5 }
-
- ibmappnCosTgRowConnCostMin OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable cost per connect time
- for this Class of Service.
- Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255."
-
- ::= { ibmappnCosTgRowEntry 6 }
-
-
-
- McKenzie & Cheng [Page 115]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- ibmappnCosTgRowConnCostMax OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable cost per connect time
- for this Class of Service.
- Cost per connect time: a value representing
- the relative cost per unit of time to use
- the TG. Range is from 0, which means no cost,
- to 255."
-
- ::= { ibmappnCosTgRowEntry 7 }
-
- ibmappnCosTgRowByteCostMin OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable cost per byte
- for this Class of Service."
-
- ::= { ibmappnCosTgRowEntry 8 }
-
- ibmappnCosTgRowByteCostMax OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable cost per byte
- for this Class of Service."
-
- ::= { ibmappnCosTgRowEntry 9 }
-
- ibmappnCosTgRowSecurityMin OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable security
-
-
-
- McKenzie & Cheng [Page 116]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- for this Class of Service."
-
- ::= { ibmappnCosTgRowEntry 10 }
-
- ibmappnCosTgRowSecurityMax OBJECT-TYPE
- SYNTAX INTEGER {
- nonsecure(1), --X'01'
- publicSwitchedNetwork(32), --X'20'
- undergroundCable(64), --X'40'
- secureConduit(96), --X'60'
- guardedConduit(128), --X'80'
- encrypted(160), --X'A0'
- guardedRadiation(192) --X'C0'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable security
- for this Class of Service."
-
- ::= { ibmappnCosTgRowEntry 11 }
-
- ibmappnCosTgRowDelayMin OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable propagation delay for this class of service.
- Relative amount of time that it takes for a signal to travel
- the length of the logical link. This time is represented in
- micro seconds, with the more values enumerated."
-
- ::= { ibmappnCosTgRowEntry 12 }
-
- ibmappnCosTgRowDelayMax OBJECT-TYPE
- SYNTAX INTEGER {
- minimum(0), --X'00'
- negligible(384), --X'4C'
- terrestrial(9216), --X'71'
- packet(147456), --X'91'
- long(294912), --X'99'
-
-
-
- McKenzie & Cheng [Page 117]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- maximum(2013265920) --X'FF'
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable propagation delay for this class of service.
- Relative amount of time that it takes for a signal to travel
- the length of the logical link. This time is represented in
- micro seconds, with the more values enumerated."
-
- ::= { ibmappnCosTgRowEntry 13 }
-
- ibmappnCosTgRowUsr1Min OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable value for this
- user defined characteristic.
- Range of values is 0-255."
-
- ::= { ibmappnCosTgRowEntry 14 }
-
- ibmappnCosTgRowUsr1Max OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable value for this
- user defined characteristic.
- Range of values is 0-255."
-
- ::= { ibmappnCosTgRowEntry 15 }
-
- ibmappnCosTgRowUsr2Min OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable value for this
- user defined characteristic.
- Range of values is 0-255."
-
- ::= { ibmappnCosTgRowEntry 16 }
-
- ibmappnCosTgRowUsr2Max OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
-
-
-
- McKenzie & Cheng [Page 118]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- STATUS mandatory
- DESCRIPTION
- "A Maximum acceptable value for this
- user defined characteristic."
-
- ::= { ibmappnCosTgRowEntry 17 }
-
- ibmappnCosTgRowUsr3Min OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Minimum acceptable value for this
- user defined characteristic.
- Range of values is 0-255."
-
- ::= { ibmappnCosTgRowEntry 18 }
-
- ibmappnCosTgRowUsr3Max OBJECT-TYPE
- SYNTAX INTEGER (0..255)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Maximum acceptable value for this
- user defined characteristic.
- Range of values is 0-255."
-
- ::= { ibmappnCosTgRowEntry 19 }
-
- END
-
- 3.0 Acknowledgements
-
- Thanks go to David Chen, Leo Temoshenko, and Mike Allen for their
- contribution and support through the development process.
-
- 4.0 Security Considerations
-
- Security issues are not discussed in this memo.
-
-
-
-
-
-
-
-
-
-
-
-
- McKenzie & Cheng [Page 119]
-
- RFC 1593 SNA APPN Node MIB March 1994
-
-
- 5.0 Authors' Addresses
-
- William F. McKenzie
- IBM Networking Systems
- P. O. Box 12195
- Research Triangle Park, NC 27709
- US
-
- Phone: +1 919 254 5705
- EMail: mckenzie@ralvma.vnet.ibm.com
-
-
- Jia-bing R. Cheng
- IBM Networking Systems
- P. O. Box 12195
- Research Triangle Park, NC 27709
- US
-
- Phone: +1 919 254 4434
- EMail: cheng@ralvm6.vnet.ibm.com
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- McKenzie & Cheng [Page 120]
-
-