BBS 1

home *** CD-ROM | disk | FTP | other *** search

/ BBS 1 / BBS#1.iso / communic / tm412-1.ha / README.TXT < prev next >

Wrap

Text File | 1993-07-20 | 18.5 KB | 478 lines

Telemate 4.12 20 July, 1993 =============================== Telemate 4.12 is now available in the following BBSs as TM412-1.ZIP, TM412-2.ZIP, TM412-3.ZIP and TM412-4.ZIP or .ARJ's. Land of the Gypsy's Oregon, USA ---- 503-297-0626 14400 V32bis Late Night BBS (*) New York, USA ---- 315-564-5700 14400 HST/ds PC Connect (*) Toronto, Canada ---- 416-733-9052 2400 User To User #1 Dallas, USA ---- 214-492-6565 14400 HST/ds User To User #2 Dallas, USA ---- 214-492-5695 9600 V32 (*) Real name logon only. "Telemate Telemate" logon not supported. In CompuServe, you will find TM4121.ZIP, TM4122.ZIP, TM4123.ZIP and TM4124.ZIP in IBMCOM forum Library 3/Comm program. In Internet, you can obtain TM412-1.ZIP, TM412-2.ZIP, TM412-3.ZIP and TM412-4.ZIP in MSDOS directory of wsmr-simtel20.army.mil [192.88.110.20] through FTP at a later time. All ZIP files are compressed using PKZIP v2.04g and come with an Authenticity Verification with our name and address in it. The phone directory SUPPORT.FON is added so that you can access our support BBS and distribute sites easier. How to Register =============== You can now register Telemate with your credit card through the Public (Software) Library at 1-800-2424-775 or 1-713-524-6394 (order only please) or write to Public (Software) Library P.O. Box 35705 Houston, TX 77235-5705 USA For cheque or money order registration, please send it to White River Software P.O.Box 73031 Limeridge Mall Postal Outlet Hamilton, Ont. L9A 5H7 Canada or MicroServe GmbH Postfach 13 68 D-28860 Lilienthal (bis 30.6.93 gilt die alte Postleitzahl 2804) Germany Tel: 04298/30557 Fax: 04298/30558 M.I.X Support Mailbox: 04298/30086 or The Owl's Nest Hazepad 25 3766 JL Soest The Netherlands CompuServe users can register Telemate and GIFLink through CompuServe's new shareware registration service. Please go to the SWREG forum and search for Telemate and GIFLink. Telemate Germany edition is also available from MicroServe GmbH. Please refer to the registration form for more details. MicroServe GmbH Postfach 13 68 D-28860 Lilienthal (bis 30.6.93 gilt die alte Postleitzahl 2804) Germany Tel: 04298/30557 Fax: 04298/30558 M.I.X Support Mailbox: 04298/30086 Distribution Sites ================== Thank you for many generous sysops, we are expanding our distribution network. On most distribution sites, you can simply log on with the user name 'Telemate Telemate' and the password 'telemate'. Then you will be able to download the Telemate files at the first call. You can also F'REQ from them with the magic name 'TELEMATE'. The following distirbution sites are listed in the phone directory SUPPORT.FON. ----- DISTRIBUTE SITE ----- Egghead's Place (313)537-5704 16800 V32bis/HST Jesus Is Lord BBS (803)776-0323 9600 V32bis Midwest BBS (219)937-4031 9600 V32 The Abyss (403)489-7019 9600 V32 The Agency BBS (803)821-2745 14400 V32bis The Bloom County (313)582-0888 14400 V32bis The Freq Shop BBS (616)629-4354 14400 V32bis/HST The Agency BBS (803)821-2745 14400 V32bis The Hideaway! (517)569-2332 14400 V32bis The Quantum BBS (410)239-8379 14400 V32bis ----- FIDONET F'REQ ----- Egghead's Place Fido 1:2410/297 Land of the Gypsy's Fido 1:105/18 The Agency BBS Fido 1:372/51 The Bloom County Fido 1:2410/400 The Freq Shop BBS Fido 1:2201/29 The Hideaway! Fido 1:2330/4 The Quantum BBS Fido 1:261/1098 IMPORTANT: If you are calling the distribution sites just for the Telemate files, you should use the "Telemate Telemate Telemate" to log on. Otherwise, you will have to go through a lot of questionaire but still will NOT be able to download the Telemate files. Installing a new Telemate ========================= The following steps show how to install Telemate on the C drive of your hard disk drive. You can use any other drive by substituting the letter of your drive in place of C in the example below. 1) Make a subdirectory for the Telemate files by typing MD \TM. 2) Change to the Telemate directory by typing CD \TM. 3) Copy all Telemate files to C:\TM. 4) Start the installation program TMINST.EXE and set up your Telemate. Now you are ready to run Telemate TM.EXE. Upgrading from v4.11 to v4.12 ============================= Upgrade from 4.11 is simple, you can replace the following files with the new ones TM.EXE the main program TM.OVL the main program (overlay) TM.RES the resource file TM.HLP the help file There is no change in the configuration file format. Note: DO NOT change the version number in TM.CFG. It should read 4.11 even you are running 4.12. Upgrading from v3.xx and v4.00 to v4.12 ======================================= Upgrading from v3.xx and 4.00 is sample, you can replace the following files with the new ones TM.EXE the main program TM.OVL the main program (overlay) TM.RES the resource file TM.HLP the help file TMINST.EXE the installation program HOST.SCR the host script (inside HOST.EXE) HCONFIG.SCR the host configuration script (inside HOST.EXE) Then run "UPGRADE TM.CFG" to upgrade your configuration file to the new format. The old script files (both *.SCR and *.TMS) are compatible with the new ones. However, a v4.12 script may not run correctly in an older version if the script contains the new "QUERY QUOTESTRING, ..." and "SET QUOTESTRING, ..." commands. If you want to use the GIFLink X/Y/Zmodem/QuickB protocol driver, you should also copy GIFLINK.EXE the main GIFLink program GIFLINK.DOC the document GKZ-U.BAT the upload batch file for GIFLink's Zmodem GKZ-D.BAT the download batch file for GIFLink's Zmodem GK-QB.BAT the upload and download batch file for QuickB What's fixed ============ . ANSI showed characters in high intensity even if normal attribute should be used. Although the change was intentionally so that it worked the same way as in version 3.xx and before, it is now changed back to the way as in version 4.00. For those who want to use high intensity all the time, please run TMINST.EXE and set the terminal window color to "black on black". Then Telemate will understand you like high intensity and use "bright white on black" in the terminal window. . Version 4.12 no longer give up timeslice to Windows. Windows does not give back the control to a background Telemate for several seconds (7 seconds in my computer) if Telemate nicely give up the timeslice. Although OS/2 has a similar problem in heavy load, you can override it by setting MAXWAIT=1 in CONFIG.SYS. This means that if a program is without timeslice for one second, it gets a higher priority for a while. By default it was 3, so Telemate may ran only once every 3 seconds. Two OS/2 specific files are added: TMOS2.CMD and TMOS2.ICO. TMOS2.CMD is a REXX script. It asks if user wants it full screen or windowed, creates the object and after getting users permission makes sure user has MSMouse for mouse in TM.CFG. TMOS2.ICO is an OS/2 format icon file. They should be in the same directory with TM.EXE and TM.CFG and the TMOS2.CMD should be run in OS/2 command line or by double clicking the TMOS2.CMD icon. Since the icon has name TMOS2.CMD, it is shown for the TMOS2.CMD. When installed, the icon will be used for the Telemate object. . In the screen saver, if remaining transfer time is not available, the number of bytes transfered is shown. Note: The screen saver hot key [Alt `] is only available when the 'Enhanced Keyboard' option is turned ON under the Options/Mouse & Keyboard dialog, because the non-enhanced BIOS does not return the key code for [Alt `]. On some foreign keyboards, [Alt `] is equivalent to pressing [Alt] together with the key left of the [1] key. . A window position check is added to the transfer window so that the whole transfer window is visiable. Previously, if the window is placed too low, only part of the window is displayed and the content may jump up and down. . Uploading with an external protocol showed 'Receive' in the usage log. . In the keyboard translation table, setting a translation character to ASCII 0 now translate the character to nothing! Previous implementation sent out an ASCII 0 or print an ASCII 0 on the screen (printing an ASCII 0 on screen produces nothing, anyway). About the Butterfly virus ========================= It is unfortunate that the previous distribution of TM411-4.ZIP GIFLK110.ZIP GIFLK111.ZIP contains a self-extracting VESA.EXE. Inside the VESA.EXE, OAK\37VESA.COM OAK\67VESA.COM are infected by a new "Butterfly" virus. If you see any of the ZIP files in a BBS, please ask the sysop to remove the files immediately. The files have since been replaced by TM411-4A.ZIP GIFLK112.ZIP The virus is not found to be dangerous. It is based on the Civil War Virus. It is only infects .COM files increasing length by 302 bytes. The virus is 307 bytes long. On execution of an infected program the virus will search for and infect the next .COM file in the directory list. The virus can be detected by F-Prot 2.08a in heuristic and quick scan modes ThunderByte anti-virus 6.02 Norton anti-virus 2.1 (21A08def) Virex 2.9 ThunderByte and Norton anti-virus can disinflect the files. F-Prot is working on a removal program. Unforetunately, McAFEE SCAN 106 DOES NOT detect the virus but McAREE said SCAN 107 will be able to detect it. To ensure this distribution is virus-free, we scan all the files with six independent anti-virus softwares, namely McAfee SCAN 106 F-Prot 2.08a ThunderByte anti-virus 6.03 InVircible anti-virus 5.01 Virex 2.9 Microsoft anti-virus ------------------------------------------------------------------------------ Telemate 4.11 17 June, 1993 =============================== What's new in Telemate ====================== . Multiple upload directories can be defined by adding ';' between the directories. If a file is not found in the first directory, Telemate will search the second and so on. If the file name contains wildcard characters, the search will stop when a match is found. For example, if the upload directory is C:\TM\UL\;C:\QWK\ specifying *.* will only upload all the files in C:\TM\UL\. . Multiple download directories can be defined by adding ';' between the directories with the wildcard between '(' and ')'. You can specify multiple wildcards for the same directory by adding ',' between the wildcards. For example, if the download directory is C:\TM\DL\;C:\QWK\(*.QW?);C:\PIC\(*.GIF,*.PCX) *.QW? files are put into the C:\QWK\ directory, *.GIF and *.PCX are put into the C:\PIC\ directory, and all other files are put into the C:\TM\DL\ directory. . Batch upload status. . Batch Zmodem download status (if remote protocol drivers transmit the information, such drivers include DSZ and GSZ). . High IRQ support, run TMINST.EXE to select IRQ number and interrupt number. . Initial guessing supports "By: ". . Hot key to the screen saver [Alt `]. . Add remaining transfer time in the screen saver. . Video Cache option which update the screen every several lines (best for Windows, OS/2 or slower machine with high speed modem). . Give up timeslice to OS/2 and Windows directly if not downloading. . Remove "phantom drive" from the file directory dialog. . Avatar emulation now turns off XON/XOFF flow control automatically. . VGA 40 line screen height. . TMScript adds two commands: SET QUOTESTRING, "..." QUERY QUOTESTRING, "..." . WIDTH.SCR is added to help setting up 132 column mode. . The host script is modified to adopt multiple directories. However, only the first directory is used. . The host script now produces three usage logs: "Host: Begin session" "Host: Connect to user name" "Host: End session" . TMSTAT calcuates total host session time. What's fixed ============ . Auto Redial function did not work correctly if the user hangs up manually and the modem hangup string contains a delay. . The Clear Screen toggle in phone directory did not work the same way the Clear Screen function worked. . Zmodem recovery with date check is fixed, previously it may not recover even if the date check pass. . File name conversion did not convert ".login"-type file to a valid DOS file name. . Extended pacing did not work. . The Log Filter did not strip off ASCII 0. . The Save function in the editor caused a share violation if the Backup Source option is turned off. . The Cut item was in the View menu. . The DIR command in the DOS command window might display a false label. . The INS command in the DOS command window did not work with ARJ 2.39. . The screen update function did not work correctly under DesqView. . Keystroke macro did not work when dialing. . A bug in TMScript STRINS command is fixed. . The READ command in TMScript can now read a string up to 512 bytes. . The name of a printed phone directory produced by TMPHONE had one character missing. ------------------------------------------------------------------------------ Telemate 4.00 5 January, 1993 ================================= What's new in Telemate ====================== . Quick dial: Pressing [Ins] in the dial window replaces the dial list with the entry under the dial bar and starts dialing. . When it is dialing, the [Ins] key inserts the entry under the dial bar to the end of the dial list. This allows you to easily add entries to the dial list without stopping the dialing process. . Quick search in the Dial window no longer needs the [Ctrl] key. For example, pressing the [D] key now jumps to the next entry that start with a 'D'. . The phone entry dialog allows an external protocol to be defined as the default protocol. . VT102 now have an improved transparent print routine. . VT102 supports <esc>[<ascii code>g, a non-standard code that display <ascii code> as the ASCII character. . Select multiple files with [Spacebar] in MULTIPLE directories when uploading. . In the file dialog, the whole file name field is erased if the first input character is '\'. This allows you to input a full path name quickly. . Zmodem download adds a Skip function. If you select the Skip button after you press [Esc], the current file is skipped and the next file begins immediately without interrupting the download process. . A date check is added to Zmodem recovery. A file with a different date (e.g. a QWK mail package) will not be resumed but will be renamed. . New entries in the DSZ.LOG are imported to TM.USE automatically after an external protocol is called and the SUCCESS variable in TMScript reports the correct status. . Backspace is stripped from the log file when the Log Filter is on. . The first 2 characters are used in the guessed initial if the person's name has only one word. . The default TM.CFG now have CTS/RTS flow control turned on and have GIFLink set up as protocol 'F' for Zmodem and 'Q' for CIS QuickB. . More DesqView friendly, Telemate will give up control to the multitasker when it is idle. . Host script allows open and close system. . RTS/CTS is now ON by default in TM.CFG What's fixed ============ . The /N option did not work if /T is used as well. . When the dial list was deleted, a random number appeared in the dial list. . A closed log file was not saved into disk until the user exited Telemate. . Ymodem-G did not send files smaller than 1024 bytes. . DOS command window did not allow ASCII 128-255 characters. . Space was not allowed in the password macro. . Set AddLineFeed did not work in script. . Query LastCall did not return the actual date of the last call. Introducing GIFLink =================== In this release, we introduce GIFLink - a X/Y/Zmodem/QuickB protocol driver that displays transmitting GIF images in stunning SuperVGA graphics! It is the first protocol driver that uses full screen computer graphics in SuperVGA mode. GIFLink is distributed with Telemate as the 4th package and it is also available as a stand-alone Shareware. Telemate registered users are entitled to a special discount for GIFLink registration. . When transfering GIF files, GIFLink shows the GIF images in the optimal size so that the full image always fits in the screen. It also displays a number of useful information such as COM port, baud rate, estimated transfer time, average cps, image resolutions, etc. . GIFLink supports most of the popular file transfer protocols such as Zmodem, Batch Ymodem, Ymodem-G, Ymodem, Xmodem and CompuServe QuickB. If the files being transmitted are not GIF images, GIFLink will work just like a normal protocol driver. So GIFLink will transmit any files, not just GIF images. . Not only can GIFLink shows the GIF images while you are transmitting them, it has a special VIEW mode so that you can look at the received GIF images in a slideshow format or preview the images you are going to sent. . Almost all SuperVGA adapters and VESA compatible adapters are supported in 256 color mode or 64 grey-scale level up to 1024x768. Standard VGA is also allowed in 16 grey-scale level. . GIFLink supports connection through its own COM interrupt routine, FOSSIL driver or BIOS INT 14H, 16550 FIFO, non-standard COM port address and IRQ, slow handshake and many more options. . GIFLink provides direct Telemate support and optionally reads TM.CFG and writes TM.USE. Most DSZ environment variables are accepted as well.