Sound Sensations!

home *** CD-ROM | disk | FTP | other *** search

/ Sound Sensations! / sound_sensations.iso / voice / faxctrl / fctrldoc.com (.txt) < prev next >

Wrap

Graham's TXT2COM | 1989-09-17 | 26.8 KB | 487 lines

~0E ┌─────────────┐ ┌────────────┐┌─┐ └┐ ┌┘ │ ┌──────┐└┘ │ │ │ │ │ └───┘ │ │ │ │ <tm> │ │ │ └─────────────┐ │ │ └──────┐ │ │ │ │ │ │ │ │ │ │ └─────────┘ │ │ U n i q u e S o f t w a r e │ └─────────────────────────────────┘ ~02 FAXCTRL 1.32 - Copyright 1989 by Unique Software ~0F Full documentation and License for only $25.00 ~07 (+$2 for 3.5"-720K disks if needed/requested) ~02 Unique Software :: Post Office Box 26613 Fort Worth, Texas 76126-0613 CompuServe : 70130,330 :: MCI-Mail : 252-8689 American People Link : UNIQUESOFT ~07 ~87365~07day - ~8724~07hr Technical FAX Support - 1-817-249-4284 ~0A -Press [PG DN] for next page- ~03 This program is produced by a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the ┌─────────┐ <tm> shareware principle works for you. If you ┌─────┴───┐ │ are unable to resolve a shareware-related ─│ │o │───────────────── problem with an ASP member by contacting the │ ┌─────┴╨──┐ │ Association of member directly, ASP may be able to help. │ │ │─┘ Shareware The ASP Ombudsman can help you resolve a └───│ o │ Professionals dispute or problem with an ASP member, but ─────│ ║ │─────────────────── does not provide technical support for └────╨────┘ MEMBER members' products. Please write to the ASP Ombudsman at P.O. Box 5786, Bellevue, WA 98006 or send a Compuserve message via easyplex to ASP Ombudsman 70007,3536 ~02 You should inspect the file with the extension ".LST" for a list of the programs which SHOULD be contained in this package and their size. ~0A -Press [PG DN] for next page- ~02 Vendors, User Groups, and Schools must read the file VENDOR.DOC for important information relating to their use and distribution of this program.~03 Shareware is NOT mediocre software because it's inexpensive. It has been accurately estimated that research and development costs (programming) in a $500 program package are less than $50. You see, with Shareware you are NOT PAYING for fancy packages, costly advertising, and expensive distribution methods. ~02 Shareware is NOT FREE. If you "buy" a disk full of software for $3.95, $5.00, or $9.99 all you have paid for is the disk, the time for making the collection, and shipping and handling. ~03 The Shareware author is still legally entitled to receive compensation for his work. Many programmers make their living by distributing their programs via Shareware. The license fee/registration which you should send is a programmer's paycheck. ~02 Shareware gives you get the ULTIMATE GUARANTEE, "If you don't use the product, you don't pay for it!". Try getting that guarantee with "commercial" software. ~0A Evaluation Period ~02 After you have used this program ~0A45~02 times, you must ~0ADISCONTINUE use OR REGISTER~02 the program by PURCHASING a single-user LICENSE from Unique Software. ~0A -Press [PG DN] for next page- ~02 It's EASY to become a licensed user of our programs. Some of them are distri- buted with a program called `LICENSE', others incorporate the license routine within the program itself. Either way, your printer does all the work. You don't have to write anything. You don't even need an envelope! ~07 VISA/MC registration is honored by the Public Software Library (800-2424-PSL orders - Info 713-665-7017) and you get a $5 credit with PSL for later use. ~02 Licensed users get printed FULL documentation (when applicable) and receive free technical support for a year. Technical questions can be submitted to any of the onlines services or FAX'd. (The numbers are listed on the HOME page.) ~03 [To request techical support, the following informations is required: free memory before running program, printer type (when applic), resident programs, and a listing of your AUTOEXEC.BAT and CONFIG.SYS files.] ~02 This software and documentation are distributed and/or sold "as is" and without warranties as to performance of merchantability or any other warranties whether expressed or implied. Because of the various hardware and software environments into which any program may be put, no warranty of fitness for a particular purpose can be offered. Good data processing procedure dictates that any program be thoroughly tested with non-critical data before relying on it. The user must assume the entire risk of using the program. Any liability of the seller will be limited exclusively to product replacement. ~0A -Press [PG DN] for next page- ~0E F A X C T R L ~03 What is FAXCTRL? ~02 FaxCtrl is actually a program and a BATch file that integrate to allow you to use both a Host system and a FAX machine on the same line! That's right! There's no need of you spending $20...$30...$50 a month for another phone line plus $75...$100...$more for installation just because you need or want a FAX machine at home or the office and need to occasionally call and login to your or your company's computer Host system. You can also use FAXCTRL to integrate an answering machine and your Host system on one phone line...or also incorporate it on your VOICE line! You retain all functions of your FAX or answering machine and your Host system! You can even use FAXCTRL alone with your Host system, just for the added security from hackers. ~0A -Press [PG DN] for next page- ~03 What is FAXCTRL? [2] ~02 And unlike programs with similar features, FAXCTRL does not use valuable DOS memory by remaining resident. Nor does it require your computer to boot, over and over again, each time it is used. ~03 FAXCTRL and Viruses ~02 Do you worry about getting viruses in your shareware? FAXCTRL contains an integrated virus checking ability. So if you receive a bad copy, or suspect that some virus has infected your copy of FAXCTRL, you can find out immediately! [See "/e(xamine)" under options.] ~03 FAXCTRL Requirements ~02 FAXCTRL.EXE require PC/MS-DOS 3.0 or greater. ~0A -Press [PG DN] for next page- ~#0~0E F A X C T R L ~03 version 1.32 Copyright 1989 by Unique Software ~02 [F1] - Quick Start [F2] - Usage [F3] - Options in Depth {1-5} [F4] - Editing FAXHOST.BAT [F5] - Using FAXHOST.ASP [F6] - Starting FAXCTRL [F7] - Calling your computer [F8] - Your Fax Machine / Security / Other Uses [F9] - Use with Other Telecommunications Programs - a ~82FREE~02 License!!! [F10] - Return to THIS menu ~0A -Press [PG DN] for next page- ~03 ~#1 FAXCTRL 1.32 - QUICK START ~02 [1]·Copy FaxCtrl to a directory accessible to DOS on your PATH statement or place FaxCtrl in your Procomm directory. COPY FAXCTRL.EXE [pathname] [2]·Copy FaxHost.ASP to your Procomm directory. COPY FAXHOST.ASP [pathname] [3]·Copy FaxHost.BAT to a directory accessible to DOS on your PATH statement or place FaxCtrl in your Procomm directory. COPY FAXHOST.BAT [pathname] [4]·Check FaxHost.BAT. you may have to add pathnames to FAXCTRL.EXE and to the command that invocates ProComm. Don't forget FAXCTRL options if needed! [5]·Type FAXHOST. FaxCtrl should load almost immediately. If it doesn't go back to step [4] and check/change the pathnames as needed. [6]·If you FAX has a settable "Answer on Ring #". Set it to anything greater than ONE. This isn't usually a problem as even those not settable usually don't answer until the second or third ring. [7]·To reach your computer, ring your the telephone line ONCE then hang up. Wait (at least) for the ring duration you have set. [The default is 10 seconds.] Then call your computer/fax line to logon and logon to Procomm as normal. [8]·To exit ProComm's host mode use the ABORT command. This returns the computer to FAXCTRL for the next call. ~0A -Press [PG DN] for next page- ~03 ~#2 FAXCTRL - USAGE ~02 FAXCTRL {/h(elp)|/e(xamine)|/option1 /option2 ... /optionN} options (* are defaults) /h(elp) - display this screen /e(xamine) - for virus /c(port):# {*1|2} /b(aud):# {300|1200|*2400|4800} /d(atabits):# {7|*8} /p(arity):# {*0|1|2} /r(wait):# [secs 6...*10...30] /w(aitb):# [secs 10...*48...120] /k(eystr):? [*`RING'] /n(oansw):?.? [*`ATS0=0 X3 V1'] /a(nswer):?.? [*`ATS0=1'] /l(inend):# [*013] ~0A -Press [PG DN] for next page- ~03 ~#3 FAXCTRL - Options in Depth [1] ~07 NOTE: in all explanations, examples, items which appear in parentheses, (), are optional and don't have to be included; items which appear in brackets, [], are comments and are NOT a part of the commands/options; items which appear in braces, {}, separated by a bar, |, are a list and ONE of them MUST be included with the command/option. ~02 /h(elp) - displays the quick help screen /e(xamine) - examine FAXCTRL.EXE for virus infections /c(port):{1|2} - selects which COMmunications port your modem uses. COM1 is default, so the only time you really need to use this option is if you are using COM2. Note that "/c:1" and "/cport:1" are identical options. /b(aud):{300|1200|2400|4800} - selects the baud setting you want to use. We suggest that you use the same baud rate that you login to ProComm with but this is not necessary. The default is 2400 baud. Note that "/b:1200" and "/baud:1200" are identical options. ~0A -Press [PG DN] for next page- ~03 ~#3 FAXCTRL - Options in Depth [2] ~02 /d(atabits):{7|8}·-·sets the databits for your selected COM port. Again there is no specific requirement. However, we suggest you use the same setting as your ProComm Host Mode uses. Eight, 8, is the default. /p(arity):{0|1|2}·-·sets the parity for your selected COM port. We suggest you use the same setting as your ProComm Host Mode uses. The parity settings of zero, one, and two, correspond (naturally) to none, odd, and even respectively. /r(wait):##·-·set the maximum number of seconds FaxCtrl will "watch" between rings on your telephone. Any number between six, 6, and thirty, 30, is valid. This number has to be set one to two seconds greater than the time between rings on your phone. Please time your telephone because times between rings do vary from phone company to phone company. This is also the amount of time you will have to wait between your first ring and actually logging onto ProComm. ~0A -Press [PG DN] for next page- ~03 ~#3 FAXCTRL - Options in Depth [3] ~02 /w(aitb):##·-·sets the maximum number of seconds that FaxCtrl waits before recycling after it detects a second ring in a row. In other words, after FaxCtrl senses a second ring in a row, it will wait this many seconds before starting to look for the next call. Forty-eight, 48, seconds is the default. Any number between 10 and 120 seconds is valid. /k(eystr):?...?·-·this is the ASCII string that is generated when your modem detects the phone line ringing. If you have a Hayes compatible modem, the string is "RING". This is also the default. If you modem generates a different word or you prefer to use the Hayes result code, 2, you can set the string with this command. For example, to use the Hayes result code for "RING" you would use the option /k:2 ~0A -Press [PG DN] for next page- ~03 ~#3 FAXCTRL - Options in Depth [4] ~02 /n(oansw):?...?·-·this actually serves two purposes. first you must include the command that turns OFF auto-anwering on your modem. You DON'T want your modem answering the line - it might be for your FAX! This is also an initialization string. The string is sent to your modem every time that FaxCtrl is run. The default is "ATS0=0 X3 V1", a Hayes command, turning off auto-answer, turning on level 3 commands, and turning on verbose mode. If your modem isn't Hayes compatible, or you prefer to use Hayes result codes (see /k(eystr)) you must set the appropriate string with this option. For example, to use the Hayes result codes, you would use the string "/n:ATS0=0 V0". /a(nswer):?...?·-·this is the ASCII string that tells your modem to auto- answer your phone line and is sent to your modem each time that FaxCtrl is about to exit to run ProCom. This command is actually unnecessary because ProComm sends an auto-answer string to your modem when initializing the Host mode. This command was included at the request of several BETA testers. You may find other uses for it. The default is "ATS0=1". ~0A -Press [PG DN] for next page- ~03 ~#3 FAXCTRL - Options in Depth [5] ~02 /l(inend):###·-·this is the decimal code that your modem requires to terminate each line/command. The majority of modems simply use a Carriage Return, <CR>, [ENTER], whatever you call it, it's decimal 13 (also the default). A lot of older Radio Shack modems required a command to terminate with a capital letter "X", if you have one of these modems you should use the option, "/l:88". Naturally valid values are from 0 to 255. ~0A -Press [PG DN] for next page- ~03 ~#4 FAXCTRL - Editing FaxHost.BAT ~02 :FAXTOP ~04 : don't forget to precede FAXCTRL with a pathname (if needed) FAXCTRL : don't forget to add options above (if needed) ~02 : on exit QUIT IF LOCAL KEYPRESS IF ERRORLEVEL=1 GOTO ABORT ~07 : don't forget to precede PCPLUS with a pathname (if needed) PCPLUS /FFAXHOST ~02 : keep looping back GOTO FAXTOP :ABORT ~04 Above is the file FAXHOST.BAT included in FAXCTL.EXE. If you don't put FAXCTRL in a directory contained on your PATH statement you need to include the path where it is located in front of the this command. Also, don't forget to include any options you might want to use AFTER FAXCTRL, for example: /c:2 ~07 If ProComm is not in PATH directory, you also need to include the path where it is located in front of the PCPLUS command. The "/fFAXHOST" option automatically runs FAXHOST.ASP also included with this package. ~0A -Press [PG DN] for next page- ~03 ~#5 FAXCTRL - Using FAXHOST.ASP ~05 ;FAXHOST.ASP ;PROCOMM PLUS SCRIPT FILE HOST QUIT ;quit to the system which will rerun FAXCTRL ~02 This is the Procomm Plus script file which integrates with FAXCTRL.BAT. As you see, it is quite simple. No adjustments to this file should be necessary. ~0A -Press [PG DN] for next page- ~03 ~#6 FAXCTRL - Starting FAXCTRL ~02 The actual use of FAXCTRL, once you've determined which options you require or want, is automatic. Although FAXCTRL can be run from the command line, it would not provide any function in itself. In other words, FAXCTRL is made up of the integrated working parts you have received, FAXCTRL.EXE, FAXHOST.BAT, and FAXHOST.ASP. Each of these parts is necessary for FAXCTRL to work properly. To run FAXCTRL once you have changed FAXHOST.BAT to meet your needs, you only need to type in FAXHOST. The rest is automatic. FAXHOST will load FAXCTRL and begin waiting for your phone line to ring. To terminate FAXCTRL you only need to press any key on your keyboard. ~0A -Press [PG DN] for next page- ~03 ~#7 FAXCTRL - Calling your computer ~02 Calling into your computer requires only a few, simple, additional steps. Ring the phone line ONCE, hangup, wait the number of seconds you have set with the /r(wait):## option (default is 10 seconds). Now call back and logon to your host system as normal. Naturally, your Host mode will work as normal. The only thing left to remember is that instead of giving a command of "Goodbye" or "Hangup", you need to issue the command to "Abort". This will return your computer to the system level and back to FAXCTRL, ready for your next call if necessary. If you forget and give the "Goodbye" command, simple call back, logon and give the "Abort" command. ~0A -Press [PG DN] for next page- ~03 ~#8 FAXCTRL - Your FAX Machine ~02 If you can select the number of rings it takes for your FAX machine to answer, set it to TWO or more rings. If you cannot, this shouldn't be a problem. Most FAX machines answer on the second or third ring. The reson for this is you don't want your FAX machine answering before your modem once you have tripped the "one-ring" signal. ~03 FAXCTRL - Security ~02 FAXCTRL gives you extra security from some hacker breaking into your Host system. For example, a lot of hackers use some sort of a dialing program that goes through all telephone numbers recording those which responded with a carrier tone. FAXCTRL would never allow your system to issue a carrier tone in such a case because such dialer programs are set up to dial and let the line ring several times before it gives up. Once that phone line rings the second time, FAXCTRL is going to ignore the attempt completely. If the hacker can't detect your modem, he cannot break into your Host setup. ~0A -Press [PG DN] for next page- ~03 ~#8 FAXCTRL - Other Uses ~02 Don't limit your imagination on the uses of FAXCTRL. You DON'T have to have a FAX machine. All of the above principles and instructions would also allow you to use an answering machine and your Host setup on the same telephone line; or an answering mahcine, your Host setup, and your NORMAL voice telephone line. To use FAXCTRL with an answering machine make sure and set your answering machine to answer on the second, third, etc. ring. Anything but the first ring. Now if someone calls to your house (everyone lets a phone ring more than once!) and you're away FAXCTRL will not invoke ProComm, or any Host setup, unless you call in and give it the "one-ring" switch. Your answering machine can operate as normal! Even such features as toll-saver work! To use FAXCTRL on your normal voice line with or without an answering machine is very simple. Just tell anyone living in your house NOT ever answer the phone unless it rings twice! When you call in needing to "talk" to your Host system, (if everyone follows orders) the "one-ring" switch works, and your call back is answered by your Host system on the first ring. ~0A -Press [PG DN] for next page- ~03 ~#9 FAXCTRL - Use with Other Telecommunications Programs ~02 If you use QMODEM, read the self-displaying documentation FQMDMDOC.COM. If you use TELIX, read the self-displaying documentation FTLXDOC.COM. FAXCTRL was developed with ProComm Plus, Copyright by DataStorm Technolgies. However this is no way limits its use to ProComm Plus. The instructions provided above should allow you to use FAXCTRL with ANY Telecommunications Program that can abort to the system level once you are finished with your call. The only adjustment needed would be in FAXHOST.BAT to invoke your terminal program so that it will either enter it's Host mode automatically or create a script that would do so like Procomm. ~0A -Press [PG DN] for next page- ~03 ~#9 FAXCTRL - a FREE License!!! ~02 Have you adapted FAXCTRL and FAXHOST.BAT to a telecommunications or host program not mentioned in this documentation? Do you use FAXCTRL in a way other than mentioned in this documentation? Do you have a suggestion for improving FAXCTRL? Send (or FAX) in your method, idea, and/or suggestion. If we have not received a similar method, idea, etc., yours will be included in the next upgrade/update of this documentation plus you will receive a free licensed version of FAXCTRL (or a free upgrade) or a free license to one of our other popular shareware programs! Our THANKS for your ideas and suggestions! Please include, if applicable, copies of your adapted FAXHOST.BAT, FAXCTRL options that might be necessary, a copy of the script/command file for the terminal program that you are using , and specific instructions on how to exit the terminal program - returning to DOS/FAXHOST.BAT. (Naturally we need to evaluate the validity and usefulness of all ideas and suggestions.) ~0A >>> END of documentation <<<