home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Classic Fond 1
/
ClassicFond01.iso
/
arcade
/
stetris.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1992-02-03
|
3KB
|
56 lines
+----------------------+
| Super Tetris |
| version 1.0 |
| 12/17/91 |
| by Spectrum HoloByte |
+----------------------+
Cracked: R. Bubba Magillicutty
-----------------------------------
* Spectrum was a bit sneaky. The game had to be installed
from floppies, but would only let you install from low density
360k disks, not 720's or 1.2's or 1.44's. Bubba fixed the
install so now it can be installed from anything. There was
also a doc check at the beginning which Bubba removed. To
install the game unpak it to yourdir, run subst a:\ c:\yourdir
and then run install from a: on anything.
System Requirements
-------------------
* Super Tetris requires 520K free RAM to run. To see how much free
* To reduce disk access on machines that don't have 600K free RAM,
use the ALT and CTRL keys to access the menu bar.
Additional Installation Instructions
------------------------------------
* In the INSTALL program, select menu option #7 instead of #5 to
install Super Tetris.
* If you want to update your sound driver or graphics mode, you will
need to run your INSTALL program and select option #3 (for graphics)
or option #4 (for sound). This will allow you to change the defaults
of your graphics and sound without having to reinstall the entire
program. When you have made your selections, select option #5 (for
graphics) or option #6 (for sound) to update Super Tetris.
* If you have a Roland sound board and a SoundBlaster sound card, you
should use the following procedure:
1. Load the INSTALL program from.
2. Select option #4 ("Select Sound Mode") from the Main Menu.
3. From the Sound Menu, choose option #4 ("Roland").
4. Continue with the installation procedure as described on pages
3 and 4 of your manual.
5. When you are ready to play the first time, type SUPERTET RS to
run the program.
Head-to-Head Super Tetris
-------------------------
* After you exit the Head-to-Head Setup Menu, you will receive the
message "SYNCHRONIZING LEVELS" instead of "READY, SET, GO!" as
described on page 21 of your manual.