home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Crawly Crypt Collection 1
/
crawlyvol1.bin
/
telecomm
/
fbill231
/
cn2fizz
/
cn2fizz.txt
< prev
Wrap
Text File
|
1994-02-01
|
3KB
|
82 lines
CN2Fizz - Connect to FizzBill Log Converter - v1.1 - FreeWare
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
o What's FizzBill?
FizzBill is a program that will calculate how much you have spent on you
comms phonebill, when using the Freeze Dried Terminal program. I wrote
FizzBill for my own use, by soon realised that quite a lot of other people
wanted to see how much they have spent their calls.
o What's Connect?
The follow is an extract from the Connect docs...
-------------------------------- >8 ----------------------------------
CoNnect is a terminal program for the ATARI ST/STE/TT series,
which will run under (nearly) any resolution and operating
system similar to the ATARI TOS. It allows a very good emulation
of VT52, VT100, VT102/ANSI and VT220 Terminals. You can use
this emulations on all serial and midi ports of your system
and - if you want - even in parallel. CoNnect was tested on
lots of graphics hardware and it seems to run well with all
of them.
-------------------------------- >8 ----------------------------------
o What's CN2Fizz?
CN2Fizz will convert the LOG file generated by Connect v1.96 into
logs files that FizzBill will understand. It also works with later
versions of Connect, even though Connect now has a built in call
coster.
o Using CN2Fizz
First of all you need a modify the config. file, that CN2Fizz will read
when run. Here's an example of the ascii CN2FIZZ.CFG file...
D:\CONN_196. ! Path & filename of Connect Log file
D:\BTLOGS\ ! Path to write converted logs
NO ! Delete Connect Log file [YES/NO]
The 1st line is the path and filename of the log that is generated by
Connect.
The 2nd line is the path where CN2Fizz will write the converted log files.
Note that you MUST create this folder yourself.
The 3rd line tells CN2Fizz to delete the Connect log AFTER calls have been
converted, if you put YES in the line. I'd start off with NO in this line,
until your sure everything is working ok, after which modify this to YES.
Note that one version of the log file is kept, before deleteing ie. CONNECT.OLD
Save the config. file
Now run CN2Fizz. If the config. file has been found, you should now be
told that the Connect Log file is being read.
If any calls have been found then CN2Fizz will tell you the date that
the call was made and will write the information to a log file. For
example, if you made a call on 1-Jun-1993 then the log created will be
called CN930601.LOG.
After the Connect log file has been read, the log will be deleted ONLY
if you placed a YES in the 3rd line of the Config. file, but one version
of the log file is kept BEFORE deleteing Ie. CONNECT.OLD
You should now have some CNyymmdd.LOG files, all you do now is run
FizzBill...
o Problem/Comments
If you find any problems with CN2FIZZ or want any improvements made
to the program then why not send me a message, to any of the
following networks...
+----> InterNet: Steve.Basford@mettav.royle.org <----+
| NeST: 90:102/108 ~ TurboNet 100:1011/0.10 |
| FidoNet 2:254/108.10 ~ AtariNet 51:502/100.10 |
+----> Part-time musicians are semiconductors. <----+