home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Crawly Crypt Collection 1
/
crawlyvol1.bin
/
program
/
hard_prj
/
hard_prj.lst
Wrap
File List
|
1994-10-17
|
3KB
|
42 lines
***********************************************************************
** T h e C r a w l y C r y p t C o l l e c t i o n **
* P r e s e n t s *
** Hardware Projects **
***********************************************************************
144_NEWL Complete instructions by Wes Newell for installing a high density
(1.44 meg) floppy in any Atari ST. Originally posted as a public
message in the AtariNet tech echo.
2_5RAM A 2.5 MegaByte RAM Expansion for the Atari ST by Christopher Hicks.
This document details the addition of an extra 2 Megs of RAM to a
standard 520/ 1040 STF/ STFM. This procedure should work for any
motherboard revision.
38400BPS A hardware project by Jürgen Meyer that will give every ST / STe a
38400 serial port. This upgrade consits of a TTL-chip, the 74LS74
(and a switch to choose the high baudrate) and is very easy to
install.
4JADAPT Plans to build an adapter that lets you use 4 joysticks with the ST.
The 2 extra joysticks connect through the parallel port and will
work with many games (including "Leatherneck").
AUDIO Adding Audio Ports To An ATARI ST by William Mills. A hardware
project that allows the ST to be connected to a stereo or amp using
standard RCA connectors. It also allows the use of headsets, for
video games.
FADEFIX Instructions to fix a common problem with Atari SM124 monochrome
monitors. Most SM124s have an insufficently regulated power supply
which allows the 70 volt line to drift high when less than a certain
number of pixels are lit.
FLOP14ST Complete plans that show how to add a 1.44 meg floppy disk drive to
your ST. Replace that old 720K floppy with a new high density
floppy drive today!
NEXMSYNC NEC MultiSync II to Atari ST by David S. Weaver. This archive
contains a text file that describes how to build a switch box to
connect the MultiSync to the ST to allow use of color or monochrome
with the flick of a switch.
RGBTOCOM Atari RGB to Composite Video Converter by Anees Munshi. Complete
docs & schematic to build a device that converts an ST analog RGB
signal to an NTSC composite signal which can be displayed on a
composite monitor, or TV.
TOS206IN Instructions to install TOS 2.06 in an ST without using a TEC board
or a TAB board.