home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Crawly Crypt Collection 1
/
crawlyvol1.bin
/
crm_demo
/
omegdemo
/
mixer
/
mixer.txt
< prev
Wrap
Text File
|
1993-07-08
|
4KB
|
195 lines
OK
CANCEL
Error:
Invalid format or value.
Lower limit for last value is
Upper limit for last value is~5
Can't Undo
Display configuration stored as
~
~
~10
~
~
~
~
~15
~
~
~
~
~20
No room for requested operation.
~
~
~
An invalid value was entered.~25
~
~
~
~
All possible note offs were sent!~30
Record Buffer Full
~
~
~
~35
~
SAVING...
LOADING...
[2][|Replace existing file?][ Yes |No]
Error reading ikon, startup, or text file.~40
Disk is write-protected.
Disk is full.
File larger than available memory.
~
~45
~
Write error, disk probably full.
File not found.
Path not found.
Disk error.~50
~
~
~
~
~55
DONE
COMPARE
UNDO
YES
NO~60
HOLD
~
~
~
~65
[3][Not enough memory|for Program.][OK]
Version 1.03, as of 7/08/93
ON
OFF
}
Channel~0
CC #
~
CC #
Chan
Port~5
Can't Undo
Current Recording Erased
Last Recording Erased
Snapshot Insertion Erased
Last Recording Restored~10
All Changes Restored~
Snapshot Restored
Clear Range Undone
Clear Range Redone
~15
~
~
~
~
~20
~
~
~
There is no room for Mixer configuration in KCS data area.
All Changes Erased~25
No Changes to Undo
GROUP
This will make all changes that you have made to your mix permanent.
Are you sure that you want to do this?
The Mixer Program requires more free tracks.~30
Please delete at least one track before proceeding.
STORE ALL CHANGES
SELECT PORT
Sorry, you are out of memory!
SELECT CONTROLLER NUMBERS~35
Fader Column CC #
Duplicate CC #'s were eliminated.
SET MIDI THINNING
Do not send MIDI message unless change is more than
or the time since the last message is at least /100 seconds.~40
SNAPSHOTS
Snapshot Updated.
SET SNAPSHOT ENABLES
Snapshots will only affect the checked combinations.
Channel CC # .~45
There is not enough memory to complete merge. Some data may be lost!
CLEAR RANGE
Erase from
Measures;Entire Piece
thru~50
No range or controllers were selected.
There is not enough memory to complete Clear.
No more sequences.
COPY ALL TRACKS TO SEQUENCE
Sequence:~55
Control Sequence:
Port Sequence:
"Name:"
"Comments:"
"Include Muted Tracks" ~60
Two ports can't share the same sequence.
"Invalid sequence!"
"Sequence in use. Erase?"
There is not enough memory to merge the mix data.
Mix data is on Track~65
Mix data is on Sequence
You are short of memory. If you continue to mix, the program may be
unable to record or merge all of your data.
You may be able to free up some memory by selecting
Store All Changes from the Edit Menu.~70
Some memory has been freed up.
You are still short of memory.
There is not enough memory to split the mix data by port!
You are trying to mix a piece of zero length!
Save .ALL file. This will make all changes permanent!~75
"ABOUT MIXER..."
Mixer was written by Emile Tobenfeld."
GO TO MEASURE
Measure
MACHINE CONTROL/MIDI TIME CODE SETUP~80
SMPTE Rate Frames/Second
MIDI Machine Control;R8 SYSEX Control
Start Time:
hr mn sc fm bt
Preroll:~85
Dropout:
Milliseconds
Tape Tracks:
Sync Track:
Tape Recorder Track Record Enables~90
RECORD MODE
Off
Rehearse
Record
PUNCH POINTS~95
to
EXIT
Sync Track
LOCK
SYNC~100
SET TRACK LOCKS
SET PUNCH POINTS
Punch In:
Punch Out:
hr mn sc fm~105
Punch out time must be after punch in time!
Recording Control...
Mixing Panel...
MIDI input status unknown. Play a note and move a wheel.
DISABLE FADERS~110
INSERT DATA
Insert selected faders at current location.
SET FIRST CONTROLLER NUMBER FOR SINGLE CHANNEL MIXER
Mixer Mode
OTTO Mode ~115
Aux/Alt/Main
Output to Invalid Port