home *** CD-ROM | disk | FTP | other *** search
/ Crawly Crypt Collection 1 / crawlyvol1.bin / crm_demo / edgedemo / utility.hlp < prev   
Text File  |  1992-08-30  |  10KB  |  266 lines

  1.  Diamond Edge Demo Version Extendible Help System
  2.  File: UTILITY.HLP
  3.  Topics covered:
  4.   
  5.     ∙  Partition Copy - Image
  6.     ∙  Partition Copy - Defragmented
  7.     ∙  Forcing Media Change
  8.     ∙  Browsing, Viewing, and Printing Files
  9.     ∙  Partition Zeroing
  10.     ∙  Partition Unzeroing
  11.     ∙  Partition Wiping
  12.     ∙  Hotkeys
  13.     ∙  Technical Support
  14.  
  15.  ∙  Partition Copy - Image
  16.  
  17.        Copy Partition Image copies sector for sector an exact image 
  18.  of the source partition to the destination partition.  The directory 
  19.  structure and disk fragmentation characteristics of the source are 
  20.  exactly duplicated on the destination.  The source and destination 
  21.  partitions must be of exactly the same size and type(both GEM or 
  22.  both BGM).  All existing data on the destination partition is lost.  
  23.  
  24.        To perform a partition image copy, select Copy Partition 
  25.  Image from the Utility menu.  You will be prompted to enter the 
  26.  source and destination partitions.  If you have Warn mode set to 
  27.  then you will be told that all data on the destination partition 
  28.  will be lost and given the opportunity to cancel. Otherwise the 
  29.  partition copy begins immediately.
  30.  
  31.  
  32.  ∙  Partition Copy  - Defragmented
  33.  
  34.        Copy Partition Defrag copies the entire contents of the source 
  35.  partition to the destination partition and defragments the files in 
  36.  the process.  The result is a destination disk that has had a full 
  37.  optimization for reading performed.  The source and destination 
  38.  partitions do not have to be the same size or type.  So you can 
  39.  perform a Copy Partition Defrag from a 10 Meg GEM partition to a 
  40.  40 meg BGM partition.  All existing data on the destination 
  41.  partition is lost.  
  42.  
  43.        To perform a partition defragmented copy, select Copy 
  44.  Partition Defrag from the Utility menu.  You will be prompted to 
  45.  enter the source and destination partitions.  If you have Warn mode 
  46.  set then you will be told that all data on the destination partition 
  47.  will be lost and given the opportunity to cancel. Otherwise the 
  48.  partition copy begins immediately.
  49.  
  50.  
  51.  ∙  Forcing Media Change
  52.  
  53.        TOS occasionally has difficulty detecting whether a disk 
  54.  has changed state and requires updating it's internal information 
  55.  about the disk.  This is especially true regarding floppy disks.  
  56.  If you suspect that you have modified your disk and TOS does not 
  57.  recognize the change, then you can choose the disk as the active 
  58.  disk and select Force Media Change.  This will force all versions
  59.  of TOS to flush and rebuild all information it has about the disk.
  60.  
  61.  
  62.  ∙  Browsing, Viewing, and Printing Files
  63.  
  64.        These functions allow you to look around your disk, look 
  65.  at text files, and print text files.  Selecting Browse will give 
  66.  you access to the GEM File Selector to look around you disk.  
  67.  Selecting View File allows you to view a text file on the screen.  
  68.  Selecting Print File will allow you to print a text file of your 
  69.  choice on your printer. This is useful to examining and printing 
  70.  Disk Medic Error reports or Validation Error reports.
  71.  
  72.  ∙  Partition Zeroing
  73.  
  74.        Diamond Edge provides several methods of Zeroing your disk.  
  75.  Zeroing a disk means erasing all of the information in the disks 
  76.  FAT and root directory sectors.  The result will be a completely 
  77.  empty partition.  Because zeroing a disk is not something you want 
  78.  to do accidently, you must enable the zeroing functions by
  79.  selecting Enable Zeroing from the Utility Menu. 
  80.  
  81.        To Zero a partition, make the partition you want to zero the 
  82.  active partition.   Then select Zero Partition from the Utility 
  83.  menu.  Regardless of the warning level specified in the user 
  84.  preferences, you will always be warned before a zeroing operation.  
  85.  If you decide to continue with the zeroing select Yes, if you want 
  86.  to abort the zeroing select No.  
  87.  
  88.        After you have confirmed your intent to zero the partition, 
  89.  but before the zeroing is actually performed all of the critical
  90.  disk information is saved in a disk information file.  This will 
  91.  allow you to Unzero the partition with absolutely no loss of data 
  92.  if you decide that you have mistakenly zeroed the partition. 
  93.  
  94.  ∙  Partition Unzeroing
  95.  
  96.       To Unzero a partition, make the partition you want to 
  97.  Unzero the active partition.   Then select Unzero Partition from 
  98.  the Utility menu.  The same procedure is followed to unzero a 
  99.  partition, as to restore the disk partition information.
  100.  
  101.        After selecting the disk you want to unzero, select the 
  102.  Select Disk Info File button to choose the disk information file 
  103.  to restore to the selected disk.  After specifying the information 
  104.  file to restore, a dialog is shown describing the disk 
  105.  characteristics form the disk information file selected for restore.  
  106.  If the the disk information is correct then select Proceed with 
  107.  Restore.  If you have any questions at all regarding whether the 
  108.  information you are about to restore is correct, then select 
  109.  Cancel to abort the restore.  
  110.  
  111.  ∙  Wipe Partition
  112.  
  113.        Wiping a partition is a special kind of Zeroing.  When you 
  114.  wipe a partition, not only are the FAT tables and root directory 
  115.  sectors erased, but every sector of the partition is overwritten.  
  116.  This is especially useful if you need to completely eliminate 
  117.  highly confidential data.
  118.  
  119.  
  120.  ∙  Hotkeys
  121.  
  122.        For ease of use,  keyboard equivalents and hotkeys are 
  123.  provided for every major program function.  In addition there are 
  124.  special keyboard commands that control the operation of various 
  125.  program functions.  
  126.  
  127.        During functions that scroll data such as Creating a 
  128.  Validation file or Validating files you may pause the display by 
  129.  selecting Control-S,  pressing Control-Q will restart the process.  
  130.  Control-C is the universal abort key and applies to every 
  131.  abortable function, such as Mapping Bad Sectors or Validating a 
  132.  disk drive.  Optimizing and the Disk Medic functions are not 
  133.  abortable via Control-C.
  134.  
  135.        The program functions and their associated hotkeys are 
  136.  described below:
  137.  
  138.  Function:               Hotkey:
  139.  
  140.  Basic Window Function Block
  141.  Change Active Drive     Press Drive Letter
  142.  Disk Information        Control-I
  143.  Fragmentation Map       Control-M
  144.  All Disk Information    Control-A
  145.    
  146.  File Menu
  147.  Preferences             Control-F
  148.  Open Window             Control-W
  149.  Quit                    Control-Q
  150.    
  151.  Medic Menu
  152.  Test Disk Structure     ALT-T
  153.  Test Multiple           Control-T
  154.  Map Bad Sectors         ALT-B
  155.  Map Bad Multiple        Control-T
  156.  Create CRC File         ALT-C
  157.  Create Checksum File    ALT-S
  158.  Validate Files          ALT-V
  159.  Partition Hard Disk     ALT-H
  160.  
  161.  Optimize Menu
  162.  Optimize Drive          ALT-O
  163.  Optimize Multiple       CONTROL-O
  164.    
  165.  Undelete Menu
  166.  Configure MIRROR        ALT-N
  167.  Run MIRROR              ALT-R
  168.  Undelete Files          ALT-U
  169.    
  170.  Archive Menu
  171.  Save Disk Info          ALT-A
  172.  Restore Disk Info       ALT-Y
  173.  Save SCSI Info          ALT-G
  174.  Restore SCSI Info       ALT-K
  175.  
  176.  Utility Menu
  177.  Copy Drive Defrag       ALT-D
  178.  Copy Drive Image        ALT-I
  179.  Force Media Change      ALT-M
  180.  View File               ALT-F
  181.  Print File              ALT-P
  182.  Browse Disk             ALT-J
  183.  Zero Disk               ALT-Z
  184.  Unzero Disk             ALT-X
  185.  Wipe Partition          ALT-W
  186.  
  187.  
  188.  
  189.  ∙  Technical Support
  190.  
  191.        Diamond Edge is backed by Oregon Research's technical 
  192.  support staff trained to provide you with fast and courteous 
  193.  service. If you require assistance beyond what the manual, help 
  194.  features, and readme files can provide, then call or write use 
  195.  with the information listed in the technical support checklist 
  196.  below.
  197.  
  198.        Before calling Oregon Research technical support, please 
  199.  attempt to recreate the problem so that you can provide us with 
  200.  an exact sequence of events.  If the problem reoccurs, then contact 
  201.  us by phone, FAX, or electronically on Genie with the following 
  202.  information:
  203.  
  204.  
  205.  ∙  Product Information:  The name, version number, and file 
  206.     date/time of the application program.  The version number 
  207.     appears in the About box.
  208.  
  209.  ∙  Your user registration number:  This appears on the master 
  210.     disk label.
  211.  
  212.  ∙  System Information: You'll need to know, the Atari ST 
  213.     computer model that you own, including memory 
  214.     configuration and TOS operating system version.
  215.  
  216.  ∙  Disk Drives:  The model and capacity of all of your 
  217.     internal and external disk drives.  Also the vendor of your 
  218.     hard disk host adapter and driver software.
  219.  
  220.  ∙  Additional Hardware:  You'll need to know the brand names 
  221.     of any additional hardware that you have connected to your 
  222.     system.  This includes printers, modems, accelerators, 
  223.     custom video cards, PC emulators etc.
  224.  
  225.  
  226.  ∙  Auto folder and Accessory Programs:  You will need a list of 
  227.     All Auto Folder and Accessory programs active in your 
  228.     system.  You should first try eliminating all auto folder and 
  229.     accessory programs and rebooting.  If the problem goes away 
  230.     consult section 8.6.3 fo your manual for more information on 
  231.     isolating a Auto folder conflict.
  232.  
  233.  ∙  Error Messages:  Write down the EXACT wording of any 
  234.     error messages that you received from the program.
  235.  
  236.  ∙  Attempted solutions:  Make careful note of any steps you took 
  237.     to solve the problem and what the results were.
  238.  
  239.        If you need assistance beyond these suggestions, and you 
  240.  cannot find the answer to your problem in the manual , help 
  241.  features, or readme files, then please write, call, or FAX us with 
  242.  the information in the technical support checklist.  We need all of 
  243.  the information in the checklist to efficiently serve you.
  244.  
  245.  
  246.  Mail:
  247.           Oregon Research Associates
  248.           16200 S.W. Pacific Hwy., Suite 162
  249.           Tigard, OR 97224
  250.           USA
  251.  
  252.  Phone:
  253.           (503) 620-4919
  254.  
  255.  FAX:
  256.           (503) 639-6182
  257.  
  258.  Electronic Support:
  259.  
  260.           Genie:  ORA.TECH     Daily
  261.  
  262.           Compuserve:  76635,2310   
  263.  
  264.  
  265.  
  266.