home *** CD-ROM | disk | FTP | other *** search
/ Crawly Crypt Collection 1 / crawlyvol1.bin / bbs / binksemp / updates.txt < prev   
Text File  |  1994-02-26  |  3KB  |  71 lines

  1. BINKSEMP : Updates
  2. -----------------
  3. V2.0   : Binklog & semplog are now combined into one program
  4.  
  5.          Speed increase for Semplog users with a Major Speed increase
  6.          for Binklog users.
  7.  
  8.          If you already run BINKLOG then delete the following files
  9.  
  10.          BINKSTAT.DAI BINKSTAT.MON BINKSTAT.OLD BINKLOG.GRF
  11.           
  12.          You MAY want to delete your CALLED and CALLERS lists as the
  13.          format has changed ever so slightly, if you do so then also
  14.          delete BINKLOG.DAT.
  15.          
  16.          Edit the BINKSEMP.CFG in this archive to suit.
  17.  
  18.          if you run SEMPLOG V1.07 then rename the following files
  19.           
  20.          SEMPSTAT.DAI to BINKSEMP.DAI
  21.          SEMPSTAT.MON to BINKSEMP.MON
  22.          SEMPSTAT.OLD to BINKSEMP.OLD
  23.          SEMPLOG.DAT  to BINKSEMP.DAT
  24.          SEMPLOG.GRF  to BINKSEMP.GRF
  25.  
  26.          If running Semplog 1.06 or older.
  27.           
  28.          Delete the SEMPSTAT.* files and SEMPLOG.GRF ,
  29.          rename the SEMPLOG.DAT to BINKSTAT.DAT
  30.          edit the BINKSEMP.CFG in the archive to suit.
  31.           
  32. V 1.07 : having had bug reports about addresses > 14 characters in length
  33.          I decided to re-write about 50% of SEMPLOG , if you already run
  34.          version 1.06 or earlier you MUST delete the following files
  35.  
  36.          SEMPSTAT.DAI SEMPSTAT.MON SEMPSTAT.OLD SEMPLOG.GRF
  37.  
  38.          This is because Semplog now no longer uses ASCII text to store
  39.          it's information , it uses byt and longwords , making the data
  40.          files MUCH smaller and faster to process.
  41.  
  42.          You MAY want to delete your CALLED and CALLERS lists as the format
  43.          has changed ever so slightly, if you do so then also delete
  44.          SEMPLOG.DAT.
  45.  
  46.          If an address read in is over 14 characters in length then it is
  47.          truncated to 13 characters and a > is added to the end to signal
  48.          an address which was too long to display.
  49.  
  50.          If a system sends or recieves over 10 megs of data then the
  51.          display now shows the amount in K instead of bytes.
  52.  
  53. V 1.06 : One more bug where Semplog thought you had called out and it was
  54.          a point calling in checked and fixed , occoured if you got
  55.  
  56.          00:05:01 Dialing xxx-xxx-xxx      <- You dialing out
  57.          00:05:03 Ring                     <- incoming ring noticed
  58.          00:05:08 Connect 14400/ARQ/V32    <- Connected incoming call
  59.                                                         ========
  60.          one immediately after the other in the log.
  61.  
  62.          Semplog definately now catches the incoming file requests.
  63.  
  64. V 1.05 : Hopefully I have fixed the problem wherby some entries for the
  65.          Nodes you call end up in the Callers log instead of the Called
  66.          list
  67.  
  68.          Semplog should now notice any incoming file requests and put
  69.          the F flag in the callers list.
  70.  
  71.