Windows 95 v2.4 Fix/W95-v2.4fix.iso/ACADWIN/SAMPLE/ACADFULL.MND

Text File | 1995-02-08 | 142.2 KB | 6,914 lines

//      ACADFULL.MNU Full Version 13.0 for Release 13 Windows/NT
//
//      Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994
//      by Autodesk, Inc.
//
//      Permission to use, copy, modify, and distribute this software
//      for any purpose and without fee is hereby granted, provided
//      that the above copyright notice appears in all copies and
//      that both that copyright notice and the limited warranty and
//      restricted rights notice below appear in all supporting
//      documentation.
//
//      AUTODESK PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
//      AUTODESK SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
//      MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.  AUTODESK, INC.
//      DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
//      UNINTERRUPTED OR ERROR FREE.
//
//      Use, duplication, or disclosure by the U.S. Government is subject to
//      restrictions set forth in FAR 52.227-19 (Commercial Computer
//      Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
//      (Rights in Technical Data and Computer Software), as applicable.
//
//      Input to menu compiler mc(.exe) for acad.mnu.  See mc.doc.
//
//      NOTE:  AutoCAD looks for an ".mnl" (Menu Lisp) file whose name is
//             the same as that of the menu file, and loads it if
//             found.  If you modify this menu and change its name, you
//             should copy acad.mnl to <yourname>.mnl, since the menu
//             relies on AutoLISP routines found there.
//
//
//      Macro definition(s) to be expanded by mc(.exe):
//

{S}=$S=ACAD.
{I}=$I=ACAD.
{T}=^P(ai_tiledvp_chk T) ^P

//
//      Default AutoCAD Release 13 NAMESPACE declaration:
//

***MENUGROUP=ACAD

//
//   Begin AutoCAD Button Menus
//

***BUTTONS1
;
$p0=*
^C^C
^B
^O
^G
^D
^E
^T

***BUTTONS2
$p0=*

***AUX1
;
$p0=*
^C^C
^B
^O
^G
^D
^E
^T

***AUX2
$p0=*

//
//   Begin AutoCAD Pull-down Menus
//

***POP0
[Referencia a objetos]
[Desde]_from
[--]
[Punto final]_endp
[Punto medio]_mid
[Intersecci≤n]_int
[Intersecci≤n ficticia]_appint
[Centro]_center
[Cuadrante]_qua
[Perpendicular]_per
[Tangente]_tan
[Punto]_nod
[Inserci≤n]_ins
[Cercano]_nea
[Rßpido]_qui^Z
[--]
[Ninguno]_non
[--]
[.X].X
[.Y].Y
[.Z].Z
[.XZ].XZ
[.YZ].YZ
[.XY].XY

***POP1
ID_File    [&Archivo]
ID_New     [&Nuevo...\tCtrl+N]^C^C_new
ID_Open    [&Abrir...\tCtrl+A]^C^C_open
ID_Save    [&Guardar\tCtrl+G]^C^C_qsave
ID_Saveas  [Guardar c&omo...]^C^C_saveas
           [--]
ID_Print   [&Imprimir...\tCtrl+I]^C^C_plot
           [--]
ID_Xref    [->&Referencias externas]
ID_XreAtt    [&Enlazar...]^C^C_xref _a
ID_XreOve    [&Sobreponer...]^C^C_xref _o
             [--]
ID_XreRel    [&Recargar]^C^C_xref _r
ID_XreDet    [&Desenlazar]^C^C_xref _d
ID_XreCli    [Rec&ortar]^C^C_xrefclip
             [--]
ID_XrePat    [&Camino]^C^C_xref _p
ID_XreLis    [<-&Lista]^C^C_xref _?
           [->&Unir]
ID_Bind      [&Todo]^C^C_xref _b *
             [--]
ID_BinBlo    [&Bloque]^C^C_xbind _b
ID_BinLay    [&Capa]^C^C_xbind _la
ID_BinLin    [Tipo &lφnea]^C^C_xbind _lt
ID_BinTex    [&Estilo texto]^C^C_xbind _s
ID_BinDim    [<-Estilo &acotaci≤n]^C^C_xbind _d
           [--]
ID_Import  [I&mportar...]^C^C_import
ID_Export  [&Exportar...]^C^C_export
ID_Ioopts  [->O&pciones]
ID_Wmfopt    [&Opciones WMF...]^C^C_wmfopts
ID_Psqual    [&Calidad PostScript]'_psquality
ID_Psdisp    [&Visualizar PostScript]'_psdrag
             [--]
ID_Psprol    [<-&Pr≤logo PostScript]'_psprolog
           [--]
ID_Mngt      [->Ges&ti≤n]
ID_Unlock    [&Utiles...]^C^C_files
ID_Audit     [&Revisar]^C^C_audit
ID_Recov     [<-R&ecuperar...]^C^C_recover
           [--]
ID_MRU     [Historial del dibujo]
           [--]
ID_Exit    [&Salir]^C^C_quit

***POP2
ID_Edit    [&Edici≤n]
ID_Undo    [Des&hacer\tCtrl+Z]_u
ID_Redo    [&Rehacer]^C^C_redo
           [--]
ID_Cut     [C&ortar\tCtrl+X]'_cutclip
ID_Copy    [&Copiar\tCtrl+C]'_copyclip
ID_Copylnk [Copiar vφ&nculo]^C^C_copylink
ID_Paste   [&Pegar\tCtrl+V]'_pasteclip
ID_Pastesp [Pegado e&special...]_pastespec
           [--]
ID_Ddmodi  [Propi&edades...]^C^C(ai_propchk)
           [--]
           [->Referencia a o&bjetos]
ID_Osnfrm    [Desde]$M=$(if,$(getvar,cmdactive),,_osnap;)_from
             [--]
ID_Osnend    [Punto final]$M=$(if,$(getvar,cmdactive),,_osnap;)_endp
ID_Osnmid    [Punto medio]$M=$(if,$(getvar,cmdactive),,_osnap;)_mid
ID_Osnint    [Intersecci≤n]$M=$(if,$(getvar,cmdactive),,_osnap;)_int
ID_Osnapp    [Intersecci≤n ficticia]$M=$(if,$(getvar,cmdactive),,_osnap;)_appint
ID_Osncen    [Centro]$M=$(if,$(getvar,cmdactive),,_osnap;)_cen
ID_Osnqua    [Cuadrante]$M=$(if,$(getvar,cmdactive),,_osnap;)_qua
ID_Osnper    [Perpendicular]$M=$(if,$(getvar,cmdactive),,_osnap;)_per
ID_Osntan    [Tangente]$M=$(if,$(getvar,cmdactive),,_osnap;)_tan
ID_Osnnod    [Punto]$M=$(if,$(getvar,cmdactive),,_osnap;)_node
ID_Osnins    [Inserci≤n]$M=$(if,$(getvar,cmdactive),,_osnap;)_ins
ID_Osnnea    [Cercano]$M=$(if,$(getvar,cmdactive),,_osnap;)_nea
ID_Osnqui    [Rßpido]$M=$(if,$(getvar,cmdactive),,_osnap;)_qui,^z
             [--]
ID_Osnnon    [<-Ninguno]$M=$(if,$(getvar,cmdactive),,_osnap;)_non
           [->&Filtros para puntos]
ID_Ptfx      [.X].x
ID_Ptfy      [.Y].y
ID_Ptfz      [.Z].z
             [--]
ID_Ptfxy     [.XY].xy
ID_Ptfyx     [.XZ].xz
ID_Ptfyz     [<-.YZ].yz
           [--]
ID_Snap    [$(if,$(getvar,snapmode),!.)For&zar cursor\tCtrl + B]^b
ID_Grid    [$(if,$(getvar,gridmode),!.)Re&jilla\tCtrl + R]^g
ID_Ortho   [$(if,$(getvar,orthomode),!.)Or&to\tCtrl  + L]^o
           [--]
           [->Se&leccionar objetos]
ID_Selwin    [Ventana]$M=$(if,$(getvar,cmdactive),,_select;)_w
ID_Selcro    [Captura]$M=$(if,$(getvar,cmdactive),,_select;)_c
ID_Selgro    [Grupo]$M=$(if,$(getvar,cmdactive),,_select;)_g
ID_Selpre    [Previo]$M=$(if,$(getvar,cmdactive),,_select;)_p
ID_Sellas    [Ultimo]$M=$(if,$(getvar,cmdactive),,_select;)_l
ID_Selall    [Todo]$M=$(if,$(getvar,cmdactive),,_select;)_ALL
ID_Selwin    [Polφgono ventana]$M=$(if,$(getvar,cmdactive),,_select;)_wp
ID_Selcro    [Polφgono captura]$M=$(if,$(getvar,cmdactive),,_select;)_cp
ID_Selfen    [Borde]$M=$(if,$(getvar,cmdactive),,_select;)_f
             [--]
ID_Seladd    [A±adir]$M=$(if,$(getvar,cmdactive),,_select;)_a
ID_Selrem    [Quitar]$M=$(if,$(getvar,cmdactive),,_select;)_r
             [--]
ID_Filter    [Filtros de selecci≤n...]'_filter
ID_GroGrp    [<-$(if,$(or,$(eq,$(getvar,pickstyle),1),$(eq,$(getvar,pickstyle),3)),!.)Seleccionar grupos]$M=$(if,+
$(eq,$(getvar,pickstyle),0),'_setvar;pickstyle;1,+
$(if,$(eq,$(getvar,pickstyle),1),'_setvar;pickstyle;0,+
$(if,$(eq,$(getvar,pickstyle),2),'_setvar;pickstyle;3,'_setvar;pickstyle;2)))
ID_Group   [&Agrupar objetos...]^C^C_group
           [--]
           [->Cons&ultar]
ID_List      [Lista]^C^C_list
             [--]
ID_Id        [Coordenadas pto.]'_id
ID_Dist      [Distancia]'_dist
ID_Area      [Area]^C^C_area
ID_Masspr    [<-Propiedades fφsicas]^C^C_massprop
           [--]
ID_Links   [&Vφnculos...]^C^C_olelinks
ID_Insobj  [&Insertar objeto...]^C^C_insertobj

***POP3
ID_View    [&Ver]
ID_Redraw  [&Redibujar vista]'_redraw
ID_Redall  [Redibujar &todo]'_redrawall
           [--]
ID_TbZoom  [->&Zoom]
ID_Zooin     [&Ampliar]'_zoom;2x
ID_Zooout    [&Reducir]'_zoom;.5x
             [--]
ID_Zoowin    [&Ventana]'_zoom;_w
ID_Zooall    [&Todo]^C^C_zoom;_all
ID_Zoopre    [&Previo]'_zoom;_p
ID_Zoosca    [&Factor]'_zoom
ID_Zoodyn    [&Dinßmico]'_zoom;_d
ID_Zoocen    [&Centro]'_zoom;_c
ID_Zoolef    [&Izquierda]'_zoom;_l
ID_Zoolim    [&Lφmites]'_zoom ^P(getvar "limmin") (getvar "limmax") ^P
ID_Zooext    [&Extensi≤n]^C^C_zoom;_e
ID_Zoovma    [<-V&mßx]'_zoom;_vmax
ID_TbPan   [->&Encuadre]
ID_Panpic    [&Punto]'_pan
             [--]
ID_Panlef    [&Izquierda]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) 0) 0 1) ;^P
ID_Panrig    [&Derecha]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) 0) 0 1) ;^P
ID_Panup     [&Superior]'_pan ^P(trans (list 0 (* -0.5 (getvar "viewsize"))) 0 1) ;^P
ID_Pandow    [I&nferior]'_pan ^P(trans (list 0 (* 0.5 (getvar "viewsize"))) 0 1) ;^P
             [--]
ID_Panupl    [Superior/i&zquierda]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) (* -0.6 (getvar "viewsize"))) 0 1) ;^P
ID_Panupr    [Superior/d&erecha]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) (* -0.6 (getvar "viewsize"))) 0 1) ;^P
ID_Pandol    [Inferior/iz&quierda]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) (* 0.6 (getvar "viewsize"))) 0 1) ;^P
ID_Pandor    [<-Inferior/de&recha]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) (* 0.6 (getvar "viewsize"))) 0 1) ;^P
           [--]
ID_Namview [Vistas con &nombre...]^C^C_ddview
ID_3DViewp [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Pto. vista 3D predefinido]
             [->Vista en &planta]
ID_Plan        [&Actual]^C^C_plan ;
ID_Planw       [&Universal]^C^C_plan _w
ID_Planu       [<-&Creado]^C^C_plan _u
             [--]
ID_Viewto    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)S&uperior]^C^C_vpoint _non *0,0,1
ID_Viewbo    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Inferior]^C^C_vpoint _non *0,0,-1
ID_Viewle    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)I&zquierdo]^C^C_vpoint _non *-1,0,0
ID_Viewri    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Derecho]^C^C_vpoint _non *1,0,0
ID_Viewfr    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Frontal]^C^C_vpoint _non *0,-1,0
ID_Viewba    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)Poste&rior ]^C^C_vpoint _non *0,1,0
             [--]
ID_Viewsw    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)IsomΘtrico &SO]^C^C_vpoint _non *-1,-1,1
ID_Viewse    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)IsomΘtrico S&E]^C^C_vpoint _non *1,-1,1
ID_Viewne    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)IsomΘtrico &NE]^C^C_vpoint _non *1,1,1
ID_Viewnw    [<-$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)IsomΘtrico N&O]^C^C_vpoint _non *-1,1,1
ID_3DVpt   [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)Pto. vista 3&D]
ID_3DVptr    [&Rotaci≤n...]^C^C_ddvpoint
ID_3DVptt    [&Trφpode]^C^C_vpoint ;
ID_3DVptv    [<-&Vector]^C^C_vpoint
ID_3DDv    [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)Per&spectiva]^C^C_dview
           [--]
ID_Vietms  [$(if,$(getvar,tilemode),!.)Espacio &modelo mosaico]^C^C'_tilemode 1
ID_Viefms  [$(if,$(and,$(eq,$(getvar,tilemode),0),$(!=,$(getvar,cvport),1)),!.)Espacio modelo &flotante]^C^C^P(ai_fms) ^P
ID_Vieps   [$(if,$(and,$(eq,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),!.)Esp&acio papel]^C^C_tilemode 0 _pspace
           [--]
ID_TVp     [->$(if,$(getvar,tilemode),,~)&Ventanas en mosaico]
ID_TVpl      [&Disposici≤n...]{T}
             [--]
ID_TVp1      [&1 ventana]^C^C_vports _si
ID_TVp2      [&2 ventanas]^C^C_vports 2
ID_TVp3      [&3 ventanas]^C^C_vports 3
ID_TVp4      [&4 ventanas]^C^C_vports 4
             [--]
ID_TVpr      [&Restituir]^C^C_vports _r
ID_TVpd      [&Suprimir]^C^C_vports _d
ID_TVpj      [&Juntar]^C^C_vports _j
             [--]
ID_TVps      [<-&Guardar]^C^C_vports _s
ID_FVp     [->$(if,$(getvar,tilemode),~)Ventanas f&lotantes]
ID_FVp1      [&1 ventana]^C^C_mview
ID_FVp2      [&2 ventanas]^C^C_mview _2
ID_FVp3      [&3 ventanas]^C^C_mview _3
ID_FVp4      [&4 ventanas]^C^C_mview _4
             [--]
ID_FVpr      [&Restituir]^C^C_mview _r
             [--]
ID_FVpon     [&ACT Ventanas]^C^C_mview _ON
ID_FVpoff    [&DES Ventanas]^C^C_mview _OFF
ID_FVph      [&Ocultar al trazar]^C^C_mview _h
             [--]
ID_FVsetup   [<-Definir &VM·lt.]^C^C_mvsetup
           [--]
ID_Ucsp    [S&CP predefinido...]^C^C_dducsp
ID_Dducs   [SCP c&on nombre...]^C^C_dducs
ID_Ucsset  [->Esta&blecer SCP]
ID_Ucsw      [&Universal]^C^C_ucs _w
ID_Ucsori    [&Origen]^C^C_ucs _o
ID_Ucszav    [&Vector Z]^C^C_ucs _zaxis
ID_Ucs3pt    [&3 puntos]^C^C_ucs _3
ID_Ucsobj    [O&bjeto]^C^C_ucs _ob
ID_Ucsvie    [V&ista]^C^C_ucs _v
ID_Ucsxar    [Rotaci≤n &X]^C^C_ucs _x
ID_Ucsyar    [Rotaci≤n &Y]^C^C_ucs _y
ID_Ucszar    [Rotaci≤n &Z]^C^C_ucs _z
ID_Ucspre    [&Previo]^C^C_ucs _p
             [--]
ID_Ucsres    [&Restituir]^C^C_ucs _r
ID_Ucssav    [&Guardar]^C^C_ucs _s
ID_Ucsdel    [&Suprimir]^C^C_ucs _d
             [--]
ID_Ucslis    [<-&Lista]^C^C_ucs _?

***POP4
           [D&ibujo]
ID_Line    [&Lφnea]^C^C_line
ID_Xline   [Lφ&nea auxiliar]^C^C_xline
ID_Ray     [Ra&yo]^C^C_ray
ID_Sketch  [&Boceto]^C^C_sketch
           [--]
ID_Pline   [&Polilφnea]^C^C_pline
ID_Poly3d  [Polilφnea &3D]^C^C_3dpoly
ID_Mline   [Lφnea &m·ltiple]^C^C_mline
           [--]
ID_Spline  [&Spline]^C^C_spline
           [->&Arco]
ID_Arc3pt    [3 &Puntos]^C^C_arc
ID_Arcsce    [&Inicio, Centro, Fin]^C^C_arc \_c
ID_Arcsca    [I&nicio, Centro, Angulo]^C^C_arc \_c \_a
ID_Arcscl    [Inicio, Centro, &Longitud]^C^C_arc \_c \_l
ID_Arcsea    [Inicio, Fin, &Angulo]^C^C_arc \_e \_a
ID_Arcsed    [Inicio, Fin, &Direcci≤n]^C^C_arc \_e \_d
ID_Arcser    [Inicio, Fin, &Radio]^C^C_arc \_e \_r
ID_Arccse    [&Centro, Inicio, Fin]^C^C_arc _c
ID_Arccsa    [C&entro, Inicio, Angulo]^C^C_arc _c \\_a
ID_Arccsl    [Cen&tro, Inicio, Longitud]^C^C_arc _c \\_l
ID_Arccon    [<-C&ontinuar]^C^C_arc ;
           [->Cφrc&ulo]
ID_Cirrad    [&Centro, Radio]^C^C_circle
ID_Cirdia    [Centro, &Dißmetro]^C^C_circle \_d
             [--]
ID_Cir2pt    [2 &puntos]^C^C_circle _2p
ID_Cir3pt    [3 P&untos]^C^C_circle _3p
             [--]
ID_Cirttr    [Tan, Tan, &Radio]^C^C_circle _ttr
ID_Cirttt    [&Tan, Tan, Tan]^C^C_circle _3p _tan \_tan \_tan \
             [--]
ID_Donut     [<-&Arandela]^C^C_donut
           [->&Elipse]
ID_Ellips    [&Centro]^C^C_ellipse _c
ID_Ellcir    [&Ejes, Fin]^C^C_ellipse
             [--]
ID_Ellarc    [<-&Arco]^C^C_ellipse _a
           [--]
           [->Polφ&gono]
ID_Rectan    [&Rectßngulo]^C^C_rectang
ID_Polygo    [&Polφgono]^C^C_polygon
ID_Solid     [<-&S≤lido 2D]^C^C_solid
           [->Pun&to]
ID_Point     [&Punto]*^C^C_point
ID_Divide    [&Dividir]^C^C_divide
ID_Measure   [<-&Graduar]^C^C_measure
ID_Insert  [->&Insertar]
ID_Dinser    [&Bloque...]^C^C_ddinsert
ID_Minsert   [Bloques &m·ltiples]^C^C_minsert
             [--]
ID_Shapes    [<-&Forma]^C^C_shape
           [--]
ID_Surface [->Super&ficies]
ID_3dobje    [&Objetos 3D...]{I}image_3dobjects {I}*
ID_3dface    [&Cara 3D]^C^C_3dface
             [--]
ID_Edge      [&Lado]^C^C_edge
ID_3dmesh    [&Malla 3D]^C^C_3dmesh
             [--]
ID_Revsur    [&Sup. de revoluci≤n]^C^C_revsurf
ID_Tabsur    [Sup. &tabulada]^C^C_tabsurf
ID_Rulesu    [Sup. ®lada]^C^C_rulesurf
ID_Edgesu    [<-Sup. &definida por lados]^C^C_edgesurf
ID_Solids  [->S≤lid&os]
             [->&Prisma rectangular]
ID_Boxcen      [&Centro]^C^C_box _ce
ID_Boxcor      [<-&VΘrtice]^C^C_box
ID_Sphere    [&Esfera]^C^C_sphere
             [->C&ilindro]
ID_Cylell      [&Elφptico]^C^C_cylinder _e
ID_Cylcen      [<-&Centro]^C^C_cylinder
             [->C&ono]
ID_Conell      [&Elφptico]^C^C_cone _e
ID_Concen      [<-&Centro]^C^C_cone
             [->C&alce]
ID_Wedcen      [&Centro]^C^C_wedge _ce
ID_Wedcor      [<-&VΘrtice]^C^C_wedge
ID_Torus     [&Toroide]^C^C_torus
             [--]
ID_Extrud    [E&xtrusi≤n]^C^C_extrude
ID_Revolv    [&Revoluci≤n]^C^C_revolve
             [--]
ID_Slice     [&Corte]^C^C_slice
ID_Sectio    [&Secci≤n]^C^C_section
ID_Interf    [I&nterferencia]^C^C_interfere
             [--]
ID_Amecon    [<-Con&vertir AME]^C^C_ameconvert
           [--]
           [->Somb&reado]
ID_Bhatch    [&Sombrear...]^C^C_bhatch
ID_Psfill    [<-&Relleno PostScript]^C^C_psfill
           [--]
           [->Te&xto]
ID_Mtext     [&Texto]^C^C_mtext
ID_Dtext     [Texto &dinßmico]^C^C_dtext
ID_Text      [<-Te&xto en 1 lφnea]^C^C_text
           [->A&cotar]
ID_DimLin    [&Lineal]^C^C_dimlinear
ID_DimAli    [&Alineada]^C^C_dimaligned
             [->&Radial]
ID_DimRad      [&Radio]^C^C_dimradius
ID_DimDia      [<-&Dißmetro]^C^C_dimdiameter
ID_DimAng    [An&gular]^C^C_dimangular
             [->C&oordenada]
ID_DimOrd      [&Automßtica]^C^C_dimordinate
ID_DimOrx      [A&bscisas]^C^C_dimordinate \_x
ID_DimOry      [<-&Ordenadas]^C^C_dimordinate \_y
ID_DimBas    [Lφ&nea base]^C^C_dimbaseline
ID_DimCon    [&Continua]^C^C_dimcontinue
             [--]
ID_DimCen    [&Marca centro]^C^C_dimcenter
ID_DimLea    [&Directriz]^C^C_leader
ID_DimTol    [&Tolerancia...]^C^C_tolerance
             [--]
ID_DimObl    [O&blicua]^C^C_dimedit _o
             [->Al&inear texto]
ID_DimHom      [&Origen]^C^C_dimtedit \_h
ID_DimTro      [&Rotaci≤n]^C^C_dimtedit \_a
               [--]
ID_DimTle      [&Izquierda]^C^C_dimtedit \_l
ID_DimTce      [&Centro]^C^C^P_SELECT \(ai_dim_cen);^P
ID_DimTri      [<-<-&Derecha]^C^C_dimtedit \_r

***POP5
           [&Constr.]
ID_Copyob  [&Copiar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
ID_Offset  [&Equidistancia]^C^C_offset
ID_Mirror  [&Simetrφa]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror)
           [->Matri&z]
ID_Arrrec    [&Rectangular]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),^C^C_array;_r,^C^C_select;\_array;_p;;_r)
ID_Arrpol    [<-&Polar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),^C^C_array;_p,^C^C_select;\_array;_p;;_p)
           [--]
ID_Chamfe  [C&haflßn]^C^C_chamfer
ID_Fillet  [E&mpalme]^C^C_fillet
           [--]
ID_Region  [&Regi≤n]^C^C_region
ID_Bpoly   [C&ontorno...]^C^C_boundary
           [--]
ID_Union   [&Uni≤n]^C^C_union
ID_Subtra  [&Diferencia]^C^C_subtract
ID_Inters  [I&ntersecci≤n]^C^C_intersect
           [--]
ID_Block   [&Bloque]^C^C_block
ID_AttDef  [&Atributo...]^C^C_ddattdef
           [--]
           [->Ma&triz 3D]
ID_Arr3dr    [&Rectangular]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),^C^C_3darray;_r,^C^C_select;\_3darray;_p;;_r)
ID_Arr3dp    [<-&Polar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),^C^C_3darray;_p,^C^C_select;\_3darray;_p;;_p)
ID_Mir3d   [S&imetrφa 3D]^C^C_mirror3d
ID_Rot3d   [&Girar 3D]^C^C_rotate3d

***POP6
           [&Modificar]
ID_Move    [&Desplazar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
ID_Rotate  [&Girar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)
ID_Align   [Al&inear]^C^C_align
           [--]
ID_Stretch [&Estirar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
ID_Scale   [&Factor escala]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
ID_Length  [&Longitud]^C^C_lengthen
ID_Change  [&Punto]^C^C_change
           [--]
ID_Trim    [&Recortar]^C^C_trim
ID_Extend  [&Alargar]^C^C_extend
           [->Par&tir]
ID_Bre1pt    [1 &punto]^C^C_break \@
ID_Bre1ps    [1 pto. &designaci≤n]^C^C_break \_f \@
             [--]
ID_Bre2pt    [2 p&untos]^C^C_break
ID_Bre2ps    [<-2 ptos. d&esignaci≤n]^C^C_break \_f
           [--]
ID_Pedit   [Editar polilφ&nea]^C^C_pedit
ID_Mledit  [Editar lφnea &m·ltiple...]^C^C_mledit
ID_Spledi  [Editar &Spline]^C^C_splinedit
ID_Texedi  [Editar te&xto...]^C^C_ddedit
ID_Hatedi  [Editar som&breado...]^C^C_hatchedit
ID_Attrib  [->Atrib&uto]
ID_Attedi    [&Editar...]^C^C_ddatte
ID_Attedg    [E&dici≤n global]^C^C_attedit
             [--]
ID_Attred    [<-&Redefinir]^C^C_attredef
ID_Explode [Des&componer]^C^C_explode
           [--]
ID_Erase   [B&orrar]^C^C_erase
ID_Oops    [íU&y!]^C^C_oops

***POP7
ID_Data    [&Datos]
ID_Objcre  [C&reaci≤n de objetos...]'_ddemodes
           [--]
ID_Layers  [&Capas...]'_ddlmodes
ID_Vlc     [->$(if,$(getvar,tilemode),~)Control capas &ventana]
ID_Vlcf      [&Inutilizar]^C^C_vplayer _f
ID_Vlct      [&Reutilizar]^C^C_vplayer _t
             [--]
ID_Vlcr      [R&establecer]^C^C_vplayer _r
ID_Vlcn      [&Crear inutilizada]^C^C_vplayer _n
ID_Vlcd      [&Visibilidad por defecto]^C^C_vplayer _v
             [--]
ID_Vlcl      [<-&Lista]^C^C_vplayer _? \;
           [--]
ID_Color   [C&olor...]^C^C_ddcolor
ID_Linety  [Tipo &lφnea...]^C^C_ddltype
ID_Mlstyle [Estilo lφnea &m·ltiple...]^C^C_mlstyle
ID_TexSty  [E&stilo texto]'_style
ID_DimSty  [Estilo &acotaci≤n...]^C^C_ddim
ID_Shape   [Archivo de &forma...]^C^C_load
           [--]
ID_Units   [&Unidades...]'_ddunits
ID_Limits  [Lφmites &dibujo]'_limits
ID_Time    [&Tiempo]^C^C_time
ID_Status  [&Estado]^C^C_status
           [--]
ID_Rename  [Cambiar &nombre...]^C^C_ddrename
ID_Purge   [->L&impiar]
ID_Purla     [&Capas]^C^C_purge _la
ID_Purlt     [Tipos &lφnea]^C^C_purge _lt
ID_Purmls    [Estilos lφnea &m·ltiple]^C^C_purge _m
ID_Purts     [&Estilos texto]^C^C_purge _st
ID_Purds     [Estilos &acotaci≤n]^C^C_purge _d
ID_Purs      [&Formas]^C^C_purge _sh
ID_Purblk    [&Bloques]^C^C_purge _b
             [--]
ID_Purall    [<-&Todo]^C^C_purge _a

***POP8
ID_Options [&Opciones]
ID_Dwgaids [&Ayudas al dibujo...]'_ddrmodes
ID_Osndd   [Referencia a o&bjetos...]'_ddosnap
ID_Cordis  [Visualizar c&oordenada]^D
           [--]
ID_Ddselec [&Designaci≤n...]'_ddselect
ID_Ddgrips [&Pinzamientos...]'_ddgrips
           [--]
ID_Ucs     [->&SCP]
ID_Ucsi      [$(if,$(or,$(eq,$(getvar,ucsicon),1),$(eq,$(getvar,ucsicon),3)),!.)&Icono]$M=$(if,+
$(or,$(eq,$(getvar,ucsicon),1),$(eq,$(getvar,ucsicon),3)),^C^C_ucsicon _off,^C^C_ucsicon _on)
ID_Ucsor     [$(if,$(or,$(eq,$(getvar,ucsicon),2),$(eq,$(getvar,ucsicon),3)),!.)Icono a &origen]$M=$(if,+
$(or,$(eq,$(getvar,ucsicon),2),$(eq,$(getvar,ucsicon),3)),^C^C_ucsicon _No,+
$(if,$(eq,$(getvar,ucsicon),1),^C^C_ucsicon _OR,^C^C_ucsicon _OR _ucsicon _on))
             [--]
ID_Ucsf      [<-$(if,$(getvar,ucsfollow),!.)&Seguir]^P(ai_onoff "UCSFOLLOW") ^P
ID_Disopt  [->&Visualizaci≤n]
ID_Dosolf    [$(if,$(getvar,fillmode),!.)&Relleno s≤lido]^P(ai_onoff "FILLMODE") ^P
ID_Dosplfr   [$(if,$(getvar,splframe),!.)&Armadura Spline]^P(ai_onoff "SPLFRAME") ^P
ID_Doattds   [->&Visualizar atributos]
ID_Doattdn     [$(if,$(eq,$(getvar,attmode),1),!.)&Normal]^C^C_attdisp _n
ID_Doattdo     [$(if,$(eq,$(getvar,attmode),2),!.)&ACT]^C^C_attdisp _on
               [--]
ID_Doattdf     [<-$(if,$(eq,$(getvar,attmode),0),!.)&DES]^C^C_attdisp _off
ID_Doddpt    [&Estilo punto...]'_ddptype
             [--]
ID_Doft      [$(if,$(and,$(getvar,textfill),$(eq,$(getvar,qtextmode),0)),!.)Rellenar &texto]^C^C_qtext _off _textfill 1
ID_Doot      [$(if,$(and,$(eq,$(getvar,textfill),0),$(eq,$(getvar,qtextmode),0)),!.)&Contorno texto]^C^C_qtext _off _textfill 0
ID_Dotf      [$(if,$(eq,$(getvar,qtextmode),1),!.)&S≤lo marco texto]^C^C_qtext _on
             [--]
ID_Dotq      [<-Calidad t&exto]^C^C_textqlty
ID_Lintyps [->Tipos &lφnea]
ID_Ltsgls    [&Escala global]^C^C_ltscale
ID_Ltpss     [$(if,$(getvar,psltscale),!.)Escala en Espacio &papel]^P(ai_onoff "PSLTSCALE") ^P
             [--]
ID_Ltgen     [<-$(if,$(getvar,plinegen),!.)&Creaci≤n tipos lφnea]^P(ai_onoff "PLINEGEN") ^P
           [--]
ID_Prefs   [Pr&eferencias...]^C^C_preferences
ID_Config  [&Configurar]^C^C_config
ID_Rconfi  [Configurar &Render...]^C^C_rconfig
ID_Tablet  [->&Tablero]
ID_Tabon     [$(if,$(getvar,tabmode),!.)&ACT]^C^C_tablet _on
ID_Taboff    [$(if,$(eq,$(getvar,tabmode),0),!.)&DES]^C^C_tablet _off
             [--]
ID_Tabcal    [Ca&librar]^C^C_tablet _cal
ID_Tabcfg    [<-&Configurar]^C^C_tablet _cfg
           [--]
ID_Savtim  [&Guardado automßtico]^C^C_savetime
ID_Sysvar  [->Var&iables de sistema]
ID_Sysvarl   [&Lista]^C^C_setvar ? *
ID_Sysvars   [<-&Establecer]^C^C_setvar

***POP9
ID_Tools   [&Herr.]
ID_Appld   [&Aplicaciones...]^C^C_appload
ID_Script  [&Ejecutar gui≤n...]^C^C_script
           [--]
ID_Tpal    [->&Barras de herramientas]
ID_TbCreate  [&Dibujo]^C^C_toolbar;ACAD.TB_DRAW;_show
ID_TbModify  [&Modificar]^C^C_toolbar;ACAD.TB_MODIFY;_show
ID_TbDims    [&Acotar]^C^C_toolbar;ACAD.TB_DIMENSIONING;_show
ID_TbSolids  [&S≤lidos]^C^C_toolbar;ACAD.TB_SOLIDS;_show
ID_TbSurfac  [S&uperficies]^C^C_toolbar;ACAD.TB_SURFACES;_show
ID_TbXref    [Referencias e&xternas]^C^C_toolbar;ACAD.TB_EXTERNAL_REFERENCE;_show
ID_TbAttrib  [A&tributo]^C^C_toolbar;ACAD.TB_ATTRIBUTE;_show
ID_TbRender  [&Render]^C^C_toolbar;ACAD.TB_RENDER;_show
ID_TbExtdb   [&Base de datos externa]^C^C_toolbar;ACAD.TB_EXTERNAL_DATABASE;_show
ID_TbMisc    [&Varios]^C^C_toolbar;ACAD.TB_MISCELLANEOUS;_show
             [--]
ID_TbSelect  [Seleccionar ob&jetos]^C^C_toolbar;ACAD.TB_SELECT_OBJECTS;_show
ID_TbOsnap   [R&eferencia a objetos]^C^C_toolbar;ACAD.TB_OBJECT_SNAP;_show
ID_TbPoiFil  [&Filtros para puntos]^C^C_toolbar;ACAD.TB_POINT_FILTERS;_show
ID_TbUcs     [&SCP]^C^C_toolbar;ACAD.TB_UCS;_show
ID_TbView    [&Vista]^C^C_toolbar;ACAD.TB_VIEW;_show
             [--]
ID_TbObjpro  [&Propiedades objeto]^C^C_toolbar;ACAD.TB_OBJECT_PROPERTIES;_show
ID_Stdtbar   [Barra &herr. estßndar]^C^C_toolbar;ACAD.STANDARD_TOOLBAR;_show
             [--]
ID_TbClall   [<-&Cerrar todo]^C^C_toolbar;ALL;_hide
ID_Aerial  [&Vista aΘrea]'_dsviewer
ID_TxtWin  [Ventana de &texto]'_textscr
           [--]
ID_Ase     [->Base de &datos externa]
ID_Aseadm    [&Administraci≤n...]^C^C_aseadmin
             [--]
ID_Aserow    [&Filas...]^C^C_aserows
ID_Aselin    [&Vφnculos...]^C^C_aselinks
             [--]
ID_Asesel    [&Seleccionar objetos...]^C^C_aseselect
ID_Aseexp    [&Exportar vφnculos...]^C^C_aseexport
ID_Asesql    [<-E&ditor SQL...]^C^C_asesqled
           [--]
ID_Hide    [&Ocultar]^C^C_hide
ID_Shaopt  [->&Sombra]
ID_Shacol    [256 &colores]^C^C^P(setq ai_se (getvar "SHADEDGE"));_shadedge;0;_shade;+
(setvar "SHADEDGE" ai_se)(setq ai_se nil)(princ) ^P
ID_Shaceh    [256 col., resaltar &aristas]^C^C^P(setq ai_se (getvar "SHADEDGE"));_shadedge;1;_shade;+
(setvar "SHADEDGE" ai_se)(setq ai_se nil)(princ) ^P
ID_Shahid    [16 col., &ocultar lφneas]^C^C^P(setq ai_se (getvar "SHADEDGE"));_shadedge;2;_shade;+
(setvar "SHADEDGE" ai_se)(setq ai_se nil)(princ) ^P
ID_Shafil    [16 col., &rellenar]^C^C^P(setq ai_se (getvar "SHADEDGE"));_shadedge;3;_shade;+
(setvar "SHADEDGE" ai_se)(setq ai_se nil)(princ) ^P
             [--]
ID_Shadif    [<-&Difusa]^C^C_shadedif
ID_Renopt  [->&Render]
ID_Render    [&Render]^C^C_render
             [--]
ID_Scene     [&Escenas...]^C^C_scene
ID_Light     [&Luces...]^C^C_light
ID_Rmat      [&Materiales...]^C^C_rmat
ID_Matlib    [&Biblioteca materiales...]^C^C_matlib
             [--]
ID_Rpref     [&Preferencias...]^C^C_rpref
ID_Stats     [<-E&stadφsticas...]^C^C_stats
           [--]
ID_Slides  [->&Foto]
ID_Sldvie    [&Ver...]^C^C_vslide
ID_Sldsav    [<-&Guardar...]^C^C_mslide
ID_Images  [->&Imagen]
ID_Imgvie    [&Ver...]^C^C_replay
ID_Imgsav    [<-&Guardar...]^C^C_saveimg
           [--]
ID_Spell   [Orto&grafφa...]^C^C_spell
ID_Cal     [Calc&uladora]'_cal
           [--]
ID_Cusmnu  [Personalizar &men·s...]^C^C_menuload
ID_Custb   [&Personalizar barras herr...]^C^C_tbconfig
           [--]
ID_Reinit  [Rei&nicializar...]^C^C_reinit
ID_Compile [&Compilar...]^C^C_compile

***POP10
ID_Help    [&?]
ID_Helpcts [&Indice...]'_help
ID_Helpsrc [&Buscar ayuda sobre...]^P(help "" "" "help_partialkey") ^P
ID_Helphow [&Uso de la Ayuda...]^P(help "" "" "help_helponhelp") ^P
           [--]
ID_Whatnew [&Novedades de la V13...]^P(playtbk "whatsnew") ^P
ID_Qtour   [&Conceptos bßsicos...]^P(playtbk "quiktour") ^P
ID_Lrnacad [A&prendizaje de AutoCAD...]^P(help "tutorial.hlp") ^P
           [--]
ID_About   [&Acerca de AutoCAD...]^C^C_about

//
//   Begin AutoCAD ToolBars
//

***TOOLBARS
**STANDARD_TOOLBAR
ID_Stdtbar  [_Toolbar("Barra herr. estßndar", _Top, _Show, 0, 38, 1)]
ID_New      [_Button("Nuevo", ICON_16_NEW, ICON_32_NEW)]^C^C_new
ID_Open     [_Button("Abrir", ICON_16_OPEN, ICON_32_OPEN)]^C^C_open
ID_Save     [_Button("Guardar", ICON_16_SAVE, ICON_32_SAVE)]^C^C_qsave
            [--]
ID_Print    [_Button("Imprimir", ICON_16_PRINT, ICON_32_PRINT)]^C^C_plot
ID_Spell    [_Button("Ortografφa", ICON_16_SPELL, ICON_32_SPELL)]^C^C_spell
            [--]
ID_Cut      [_Button("Cortar", ICON_16_CUT, ICON_32_CUT)]'_cutclip
ID_Copy     [_Button("Copiar", ICON_16_COPY, ICON_32_COPY)]'_copyclip
ID_Paste    [_Button("Pegar", ICON_16_PASTE, ICON_32_PASTE)]'_pasteclip
            [--]
ID_Undo     [_Button("Deshacer", ICON_16_UNDO, ICON_32_UNDO)]_u
ID_Redo     [_Button("Rehacer", ICON_16_REDO, ICON_32_REDO)]^C^C_redo
            [--]
ID_TbToolwi [_Flyout("Ventanas de herr.", ICON_16_TOOLBA, ICON_32_TOOLBA, _OtherIcon, ACAD.TB_TOOL_WINDOWS)]
            [--]
ID_TbSelect [_Flyout("Seleccionar objetos", ICON_16_SELECT, ICON_32_SELECT, _OtherIcon, ACAD.TB_SELECT_OBJECTS)]
ID_Group    [_Button("Agrupar objetos", ICON_16_GROUP, ICON_32_GROUP)]^C^C_group
            [--]
ID_TbOsnap  [_Flyout("Referencia a objetos", ICON_16_OSNAP, ICON_32_OSNAP, _OtherIcon, ACAD.TB_OBJECT_SNAP)]
ID_TbPoifil [_Flyout("Filtros para puntos", ICON_16_PTFX, ICON_32_PTFX, _OtherIcon, ACAD.TB_POINT_FILTERS)]
            [--]
ID_TbUcs    [_Flyout("SCP", ICON_16_UCS, ICON_32_UCS, _OtherIcon, ACAD.TB_UCS)]
ID_TbView   [_Flyout("Vista", ICON_16_DDVIEW, ICON_32_DDVIEW, _OtherIcon, ACAD.TB_VIEW)]
            [--]
ID_TbRedraw [_Flyout("Redibujar", ICON_16_REDRAW, ICON_32_REDRAW, _OtherIcon, ACAD.TB_REDRAW)]
ID_TbPan    [_Flyout("Encuadre", ICON_16_PAN, ICON_32_PAN, _OtherIcon, ACAD.TB_PAN)]
            [--]
ID_Zooin    [_Button("Zoom ampliar", ICON_16_ZOOIN, ICON_32_ZOOIN)]'_zoom;2x
ID_Zooout   [_Button("Zoom reducir", ICON_16_ZOOOUT, ICON_32_ZOOOUT)]'_zoom;.5x
ID_Zoowin   [_Button("Ventana", ICON_16_ZOOWIN, ICON_32_ZOOWIN)]'_zoom;_w
ID_TbZoom   [_Flyout("Zoom", ICON_16_ZOOM, ICON_32_ZOOM, _OtherIcon, ACAD.TB_ZOOM)]
            [--]
ID_TbSpace  [_Flyout("Espacio", ICON_16_VIETMS, ICON_32_VIETMS, _OtherIcon, ACAD.TB_SPACE)]
            [--]
ID_Help     [_Button("Ayuda", ICON_16_HELP, ICON_32_HELP)]'_?

**TB_TOOL_WINDOWS
ID_TbToolwi [_Toolbar("Ventanas de herr.", _Floating, _Hide, 2, 80, 5)]
ID_Aerial   [_Button("Vista aΘrea", ICON_16_AERIAL, ICON_32_AERIAL)]'_dsviewer
ID_TbDraw   [_Button("Barra herr. dibujo", ICON_16_TOODRA, ICON_32_TOODRA)]^C^C_toolbar;ACAD.TB_DRAW;_show
ID_TbModify [_Button("Barra herr. modificar", ICON_16_TOOMOD, ICON_32_TOOMOD)]^C^C_toolbar;ACAD.TB_MODIFY;_show
ID_TbDims   [_Button("Barra herr. acotar", ICON_16_TOODIM, ICON_32_TOODIM)]^C^C_toolbar;ACAD.TB_DIMENSIONING;_show
ID_TbSolids [_Button("Barra herr. s≤lidos", ICON_16_TOOSOL, ICON_32_TOOSOL)]^C^C_toolbar;ACAD.TB_SOLIDS;_show
ID_TbSurfac [_Button("Barra herr. superficies", ICON_16_TOOSUR, ICON_32_TOOSUR)]^C^C_toolbar;ACAD.TB_SURFACES;_show
ID_TbXref   [_Button("Barra herr. RefX", ICON_16_TOOXRE, ICON_32_TOOXRE)]^C^C_toolbar;ACAD.TB_EXTERNAL_REFERENCE;_show
ID_TbAttrib [_Button("Barra herr. atributos", ICON_16_TOOATT, ICON_32_TOOATT)]^C^C_toolbar;ACAD.TB_ATTRIBUTE;_show
ID_TbRender [_Button("Barra herr. Render", ICON_16_TOOREN, ICON_32_TOOREN)]^C^C_toolbar;ACAD.TB_RENDER;_show
ID_TbExtdb  [_Button("Barra herr. base datos ext.", ICON_16_TOOASE, ICON_32_TOOASE)]^C^C_toolbar;ACAD.TB_EXTERNAL_DATABASE;_show
ID_TbObjpro [_Button("Barra herr. prop. objeto", ICON_16_TOOPRO, ICON_32_TOOPRO)]^C^C_toolbar;ACAD.TB_OBJECT_PROPERTIES;_show
ID_Stdtbar  [_Button("Barra herr. estßndar", ICON_16_TOOSTA, ICON_32_TOOSTA)]^C^C_toolbar;ACAD.STANDARD_TOOLBAR;_show

**TB_SELECT_OBJECTS
ID_TbSelect [_Toolbar("Seleccionar objetos", _Floating, _Hide, 2, 80, 5)]
ID_Selwin   [_Button("Ventana", ICON_16_SELWIN, ICON_32_SELWIN)]$M=$(if,$(getvar,cmdactive),,_select;)_w
ID_Selcro   [_Button("Captura", ICON_16_SELCRO, ICON_32_SELCRO)]$M=$(if,$(getvar,cmdactive),,_select;)_c
ID_Selgro   [_Button("Grupo", ICON_16_SELGRO, ICON_32_SELGRO)]$M=$(if,$(getvar,cmdactive),,_select;)_g
ID_Selpre   [_Button("Previo", ICON_16_SELPRE, ICON_32_SELPRE)]$M=$(if,$(getvar,cmdactive),,_select;)_p
ID_Sellas   [_Button("Ultimo", ICON_16_SELLAS, ICON_32_SELLAS)]$M=$(if,$(getvar,cmdactive),,_select;)_l
ID_Selall   [_Button("Todo", ICON_16_SELALL, ICON_32_SELALL)]$M=$(if,$(getvar,cmdactive),,_select;)_ALL
ID_Selwp    [_Button("Polφgono ventana", ICON_16_SELWP, ICON_32_SELWP)]$M=$(if,$(getvar,cmdactive),,_select;)_wp
ID_Selcp    [_Button("Polφgono captura", ICON_16_SELCP, ICON_32_SELCP)]$M=$(if,$(getvar,cmdactive),,_select;)_cp
ID_Selfen   [_Button("Borde", ICON_16_SELFEN, ICON_32_SELFEN)]$M=$(if,$(getvar,cmdactive),,_select;)_f
ID_Seladd   [_Button("A±adir", ICON_16_SELADD, ICON_32_SELADD)]$M=$(if,$(getvar,cmdactive),,_select;)_a
ID_Selrem   [_Button("Quitar", ICON_16_SELREM, ICON_32_SELREM)]$M=$(if,$(getvar,cmdactive),,_select;)_r
ID_Filter   [_Button("Filtros de selecci≤n...", ICON_16_FILTER, ICON_32_FILTER)]'_filter

**TB_OBJECT_SNAP
ID_TbOsnap  [_Toolbar("Referencia a objetos", _Floating, _Hide, 100, 100, 1)]
ID_Osnfro   [_Button("Desde", ICON_16_OSNFRO, ICON_32_OSNFRO)]$M=$(if,$(getvar,cmdactive),,_osnap;)_from
ID_Osnend   [_Button("Punto final", ICON_16_OSNEND, ICON_32_OSNEND)]$M=$(if,$(getvar,cmdactive),,_osnap;)_endp
ID_Osnmid   [_Button("Punto medio", ICON_16_OSNMID, ICON_32_OSNMID)]$M=$(if,$(getvar,cmdactive),,_osnap;)_mid
ID_Osnint   [_Button("Intersecci≤n", ICON_16_OSNINT, ICON_32_OSNINT)]$M=$(if,$(getvar,cmdactive),,_osnap;)_int
ID_Osnapp   [_Button("Intersecci≤n ficticia", ICON_16_OSNAPP, ICON_32_OSNAPP)]$M=$(if,+
$(getvar,cmdactive),,_osnap;)_appint
ID_Osncen   [_Button("Centro", ICON_16_OSNCEN, ICON_32_OSNCEN)]$M=$(if,$(getvar,cmdactive),,_osnap;)_cen
ID_Osnqua   [_Button("Cuadrante", ICON_16_OSNQUA, ICON_32_OSNQUA)]$M=$(if,$(getvar,cmdactive),,_osnap;)_qua
ID_Osnper   [_Button("Perpendicular", ICON_16_OSNPER, ICON_32_OSNPER)]$M=$(if,$(getvar,cmdactive),,_osnap;)_per
ID_Osntan   [_Button("Tangente", ICON_16_OSNTAN, ICON_32_OSNTAN)]$M=$(if,$(getvar,cmdactive),,_osnap;)_tan
ID_Osnnod   [_Button("Punto", ICON_16_OSNNOD, ICON_32_OSNNOD)]$M=$(if,$(getvar,cmdactive),,_osnap;)_nod
ID_Osnins   [_Button("Inserci≤n", ICON_16_OSNINS, ICON_32_OSNINS)]$M=$(if,$(getvar,cmdactive),,_osnap;)_ins
ID_Osnnea   [_Button("Cercano", ICON_16_OSNNEA, ICON_32_OSNNEA)]$M=$(if,$(getvar,cmdactive),,_osnap;)_nea
ID_Osnqui   [_Button("Rßpido", ICON_16_OSNQUI, ICON_32_OSNQUI)]$M=$(if,$(getvar,cmdactive),,_osnap;)_quick,^Z
ID_Osnnon   [_Button("Ninguno", ICON_16_OSNNON, ICON_32_OSNNON)]$M=$(if,$(getvar,cmdactive),,_osnap;)_non
ID_Osndd    [_Button("Referencia a objetos...", ICON_16_OSNAP, ICON_32_OSNAP)]'_ddosnap
ID_Cal      [_Button("Calculadora", ICON_16_CAL, ICON_32_CAL)]'_cal

**TB_POINT_FILTERS
ID_TbPoiFil [_Toolbar("Filtros para puntos", _Floating, _Hide, 100, 150, 1)]
ID_Ptfx     [_Button("_.X_", ICON_16_PTFX, ICON_32_PTFX)].x
ID_Ptfy     [_Button("_.Y_", ICON_16_PTFY, ICON_32_PTFY)].y
ID_Ptfz     [_Button("_.Z_", ICON_16_PTFZ, ICON_32_PTFZ)].z
ID_Ptfxy    [_Button("_.XY_", ICON_16_PTFXY, ICON_32_PTFXY)].xy
ID_Ptfxz    [_Button("_.XZ_", ICON_16_PTFXZ, ICON_32_PTFXZ)].xz
ID_Ptfyz    [_Button("_.YZ_", ICON_16_PTFYZ, ICON_32_PTFYZ)].yz

**TB_UCS
ID_TbUcs    [_Toolbar("SCP", _Floating, _Hide, 100, 150, 1)]
ID_Ucsp     [_Button("SCP predefinido", ICON_16_UCSP, ICON_32_UCSP)]^C^C_dducsp
ID_Dducs    [_Button("SCP con nombre", ICON_16_DDUCS, ICON_32_DDUCS)]^C^C_dducs
ID_Ucsw     [_Button("Universal", ICON_16_UCSW, ICON_32_UCSW)]^C^C_ucs _w
ID_Ucsori   [_Button("Origen", ICON_16_UCSORI, ICON_32_UCSORI)]^C^C_ucs _o
ID_Ucszav   [_Button("Vector Z", ICON_16_UCSZAV, ICON_32_UCSZAV)]^C^C_ucs _zaxis
ID_Ucs3pt   [_Button("3 puntos", ICON_16_UCS3PT, ICON_32_UCS3PT)]^C^C_ucs _3
ID_Ucsobj   [_Button("Objeto", ICON_16_UCSOBJ, ICON_32_UCSOBJ)]^C^C_ucs _ob
ID_Ucsvie   [_Button("Vista", ICON_16_UCSVIE, ICON_32_UCSVIE)]^C^C_ucs _v
ID_Ucsxar   [_Button("Rotaci≤n X", ICON_16_UCSXAR, ICON_32_UCSXAR)]^C^C_ucs _x
ID_Ucsyar   [_Button("Rotaci≤n Y", ICON_16_UCSYAR, ICON_32_UCSYAR)]^C^C_ucs _y
ID_Ucszar   [_Button("Rotaci≤n Z", ICON_16_UCSZAR, ICON_32_UCSZAR)]^C^C_ucs _z
ID_Ucspre   [_Button("Previo", ICON_16_UCSPRE, ICON_32_UCSPRE)]^C^C_ucs _p
ID_Ucsres   [_Button("Restituir", ICON_16_UCSRES, ICON_32_UCSRES)]^C^C_ucs _r
ID_Ucssav   [_Button("Guardar", ICON_16_UCSSAV, ICON_32_UCSSAV)]^C^C_ucs _s

**TB_VIEW
ID_TbView   [_Toolbar("Vista", _Floating, _Hide, 100, 150, 1)]
ID_Dview    [_Button("Vistas con nombre", ICON_16_DDVIEW, ICON_32_DDVIEW)]^C^C_ddview
ID_Vietop   [_Button("Superior", ICON_16_VIETOP, ICON_32_VIETOP)]^C^C_vpoint _non *0,0,1
ID_Viebot   [_Button("Inferior", ICON_16_VIEBOT, ICON_32_VIEBOT)]^C^C_vpoint _non *0,0,-1
ID_Vielef   [_Button("Izquierdo", ICON_16_VIELEF, ICON_32_VIELEF)]^C^C_vpoint _non *-1,0,0
ID_Vierig   [_Button("Derecho", ICON_16_VIERIG, ICON_32_VIERIG)]^C^C_vpoint _non *1,0,0
ID_Viefro   [_Button("Frontal", ICON_16_VIEFRO, ICON_32_VIEFRO)]^C^C_vpoint _non *0,-1,0
ID_Viebac   [_Button("Posterior", ICON_16_VIEBAC, ICON_32_VIEBAC)]^C^C_vpoint _non *0,1,0
ID_Vieswi   [_Button("IsomΘtrico SO", ICON_16_VIESWI, ICON_32_VIESWI)]^C^C_vpoint _non *-1,-1,1
ID_Viesei   [_Button("IsomΘtrico SE", ICON_16_VIESEI, ICON_32_VIESEI)]^C^C_vpoint _non *1,-1,1
ID_Vienei   [_Button("IsomΘtrico NE", ICON_16_VIENEI, ICON_32_VIENEI)]^C^C_vpoint _non *1,1,1
ID_Vienwi   [_Button("IsomΘtrico NO", ICON_16_VIENWI, ICON_32_VIENWI)]^C^C_vpoint _non *-1,1,1

**TB_REDRAW
ID_TbRedraw [_Toolbar("Redibujar", _Floating, _Hide, 100, 150, 1)]
ID_Redraw   [_Button("Redibujar vista", ICON_16_REDRAW, ICON_32_REDRAW)]'_redraw
ID_Redall   [_Button("Redibujar todo", ICON_16_REDALL, ICON_32_REDALL)]'_redrawall

**TB_PAN
ID_TbPan    [_Toolbar("Encuadre", _Floating, _Hide, 100, 150, 1)]
ID_Panpic   [_Button("Punto", ICON_16_PAN, ICON_32_PAN)]'_pan
ID_Panlef   [_Button("Izquierda", ICON_16_PANLEF, ICON_32_PANLEF)]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) 0) 0 1) ;^P
ID_Panrig   [_Button("Derecha", ICON_16_PANRIG, ICON_32_PANRIG)]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) 0) 0 1) ;^P
ID_Panup    [_Button("Superior", ICON_16_PANUP, ICON_32_PANUP)]'_pan ^P(trans (list 0 (* -0.5 (getvar "viewsize"))) 0 1) ;^P
ID_Pandow   [_Button("Inferior", ICON_16_PANDOW, ICON_32_PANDOW)]'_pan ^P(trans (list 0 (* 0.5 (getvar "viewsize"))) 0 1) ;^P
ID_Panupl   [_Button("Superior-Izquierda", ICON_16_PANUPL, ICON_32_PANUPL)]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) +
(* -0.6 (getvar "viewsize"))) 0 1) ;^P
ID_Panupr   [_Button("Superior-Derecha", ICON_16_PANUPR, ICON_32_PANUPR)]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) +
(* -0.6 (getvar "viewsize"))) 0 1) ;^P
ID_Pandol   [_Button("Inferior-Izquierda", ICON_16_PANDOL, ICON_32_PANDOL)]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) +
(* 0.6 (getvar "viewsize"))) 0 1) ;^P
ID_Pandor   [_Button("Inferior-Derecha", ICON_16_PANDOR, ICON_32_PANDOR)]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) +
(* 0.6 (getvar "viewsize"))) 0 1) ;^P

**TB_ZOOM
ID_TbZoom   [_Toolbar("Zoom", _Floating, _Hide, 100, 150, 1)]
ID_Zooall   [_Button("Todo", ICON_16_ZOOALL, ICON_32_ZOOALL)]^C^C_zoom;_all
ID_Zoopre   [_Button("Previo", ICON_16_ZOOPRE, ICON_32_ZOOPRE)]'_zoom;_p
ID_Zoosca   [_Button("Factor", ICON_16_ZOOSCA, ICON_32_ZOOSCA)]'_zoom
ID_Zoodyn   [_Button("Dinßmico", ICON_16_ZOODYN, ICON_32_ZOODYN)]'_zoom;_d
ID_Zoocen   [_Button("Centro", ICON_16_ZOOCEN, ICON_32_ZOOCEN)]'_zoom;_c
ID_Zoolef   [_Button("Izquierda", ICON_16_ZOOLEF, ICON_32_ZOOLEF)]'_zoom;_l
ID_Zoolim   [_Button("Lφmites", ICON_16_ZOOLIM, ICON_32_ZOOLIM)]'_zoom;^P(getvar "limmin") (getvar "limmax") ^P
ID_Zooext   [_Button("Extensi≤n", ICON_16_ZOOEXT, ICON_32_ZOOEXT)]^C^C_zoom;_e
ID_Zoovma   [_Button("Vmßx", ICON_16_ZOOVMA, ICON_32_ZOOVMA)]'_zoom;_vmax

**TB_SPACE
ID_TbSpace  [_Toolbar("Espacio", _Floating, _Hide, 2, 80, 5)]
ID_Vietms   [_Button("Espacio modelo mosaico", ICON_16_VIETMS, ICON_32_VIETMS)]^C^C_tilemode 1
ID_Viefms   [_Button("Espacio modelo flotante", ICON_16_VIEFMS, ICON_32_VIEFMS)]^C^C^P(ai_fms) ^P
ID_Vieps    [_Button("Espacio papel", ICON_16_VIEPS, ICON_32_VIEPS)]^C^C_tilemode 0 _pspace

**TB_OBJECT_PROPERTIES
ID_TbObjpro [_Toolbar("Propiedades de objetos", _Top, _Show, 0, 100, 1)]
ID_Layers   [_Button("Capas", ICON_16_LAYERS, ICON_32_LAYERS)]'_ddlmodes
            [--]
ID_Layer    [_Control(_Layer)]
            [--]
ID_Color    [_Control(_Color)]
            [--]
ID_Linety   [_Button("Tipo lφnea", ICON_16_LINETY, ICON_32_LINETY)]'_ddltype
            [--]
ID_LType    [_Control(_Linetype)]
            [--]
ID_Objcre   [_Button("Creaci≤n de objetos", ICON_16_OBJCRE, ICON_32_OBJCRE)]'_ddemodes
ID_Mlstyle  [_Button("Estilo lφnea m·ltiple", ICON_16_MSTYLE, ICON_32_MSTYLE)]^C^C_mlstyle
            [--]
ID_Ddmodi   [_Button("Propiedades", ICON_16_MODIFY, ICON_32_MODIFY)]^C^C(ai_propchk)
            [--]
ID_TbInq    [_Flyout("Consultar", ICON_16_LIST, ICON_32_LIST, _OtherIcon, ACAD.TB_INQUIRY)]

**TB_INQUIRY
ID_TbInq    [_Toolbar("Consultar", _Floating, _Hide, 10, 340, 1)]
ID_List     [_Button("Lista", ICON_16_LIST, ICON_32_LIST)]^C^C_list
ID_Id       [_Button("Coordenadas pto.", ICON_16_ID, ICON_32_ID)]'_id
ID_Dist     [_Button("Distancia", ICON_16_DIST, ICON_32_DIST)]'_dist
ID_Area     [_Button("Area", ICON_16_AREA, ICON_32_AREA)]^C^C_area
ID_Masspr   [_Button("Propiedades fφsicas", ICON_16_MASSPR, ICON_32_MASSPR)]^C^C_massprop

**TB_DRAW
ID_TbDraw   [_Toolbar("Dibujo", _Floating, _Show, 1, 101, 5)]
ID_TbLine   [_Flyout("Lφnea", ICON_16_LINE, ICON_32_LINE, _OtherIcon, ACAD.TB_LINE)]
ID_TbPline  [_Flyout("Polilφnea", ICON_16_PLINE, ICON_32_PLINE, _OtherIcon, ACAD.TB_PLINE)]
ID_TbArc    [_Flyout("Arco", ICON_16_ARC3PT, ICON_32_ARC3PT, _OtherIcon, ACAD.TB_ARC)]
ID_TbCir    [_Flyout("Cφrculo", ICON_16_CIRCLE, ICON_32_CIRCLE, _OtherIcon, ACAD.TB_CIRCLE)]
ID_TbEll    [_Flyout("Elipse", ICON_16_ELLIPS, ICON_32_ELLIPS, _OtherIcon, ACAD.TB_ELLIPSE)]
ID_TbPgon   [_Flyout("Polφgono", ICON_16_POLYGO, ICON_32_POLYGO, _OtherIcon, ACAD.TB_POLYGON)]
ID_TbPoint  [_Flyout("Punto", ICON_16_POINT, ICON_32_POINT, _OtherIcon, ACAD.TB_POINT)]
ID_TbBlock  [_Flyout("Bloque", ICON_16_BLOCK, ICON_32_BLOCK, _OtherIcon, ACAD.TB_BLOCK)]
ID_TbHatch  [_Flyout("Sombreado", ICON_16_BHATCH, ICON_32_BHATCH, _OtherIcon, ACAD.TB_HATCH)]
ID_TbText   [_Flyout("Texto", ICON_16_MTEXT, ICON_32_MTEXT, _OtherIcon, ACAD.TB_TEXT)]

**TB_LINE
ID_TbLine   [_Toolbar("Lφnea", _Floating, _Hide, 10, 120, 1)]
ID_Line     [_Button("Lφnea", ICON_16_LINE, ICON_32_LINE)]^C^C_line
ID_Xline    [_Button("Lφnea auxiliar", ICON_16_XLINE, ICON_32_XLINE)]^C^C_xline
ID_Ray      [_Button("Rayo", ICON_16_RAY, ICON_32_RAY)]^C^C_ray

**TB_PLINE
ID_Tbpline  [_Toolbar("Polilφnea", _Floating, _Hide, 10, 140, 1)]
ID_Pline    [_Button("Polilφnea", ICON_16_PLINE, ICON_32_PLINE)]^C^C_pline
ID_Poly3d   [_Button("Polilφnea 3D", ICON_16_3DPOLY, ICON_32_3DPOLY)]^C^C_3dpoly
ID_Mline    [_Button("Lφnea m·ltiple", ICON_16_MLINE, ICON_32_MLINE)]^C^C_mline
ID_Spline   [_Button("Spline", ICON_16_SPLINE, ICON_32_SPLINE)]^C^C_spline

**TB_ARC
ID_Tbarc    [_Toolbar("Arco", _Floating, _Hide, 10, 160, 1)]
ID_Arc3pt   [_Button("3 Puntos", ICON_16_ARC3PT, ICON_32_ARC3PT)]^C^C_arc
ID_Arcsce   [_Button("Inicio Cen Fin", ICON_16_ARCSCE, ICON_32_ARCSCE)]^C^C_arc \_c
ID_Arcsca   [_Button("Inicio Cen Angulo", ICON_16_ARCSCA, ICON_32_ARCSCA)]^C^C_arc \_c \_a
ID_Arcscl   [_Button("Inicio Cen Longitud", ICON_16_ARCSCL, ICON_32_ARCSCL)]^C^C_arc \_c \_l
ID_Arcsea   [_Button("Inicio Fin Angulo", ICON_16_ARCSEA, ICON_32_ARCSEA)]^C^C_arc \_e \_a
ID_Arcsed   [_Button("Inicio Fin Dir", ICON_16_ARCSED, ICON_32_ARCSED)]^C^C_arc \_e \_d
ID_Arcser   [_Button("Inicio Fin Radio", ICON_16_ARCSER, ICON_32_ARCSER)]^C^C_arc \_e \_r
ID_Arccse   [_Button("Cen Inicio Fin", ICON_16_ARCCSE, ICON_32_ARCCSE)]^C^C_arc _c
ID_Arccsa   [_Button("Cen Inicio Angulo", ICON_16_ARCCSA, ICON_32_ARCCSA)]^C^C_arc _c \\_a
ID_Arccsl   [_Button("Cen Inicio Longitud", ICON_16_ARCCSL, ICON_32_ARCCSL)]^C^C_arc _c \\_l
ID_Arccon   [_Button("Continuar", ICON_16_ARCCON, ICON_32_ARCCON)]^C^C_arc ;

**TB_CIRCLE
ID_Tbcir    [_Toolbar("Cφrculo", _Floating, _Hide, 10, 180, 1)]
ID_Cirrad   [_Button("Centro Radio", ICON_16_CIRRAD, ICON_32_CIRRAD)]^C^C_circle
ID_Cirdia   [_Button("Centro Dißmetro", ICON_16_CIRDIA, ICON_32_CIRDIA)]^C^C_circle \_d
ID_Cir2pt   [_Button("2 puntos", ICON_16_CIR2PT, ICON_32_CIR2PT)]^C^C_circle _2p
ID_Cir3pt   [_Button("3 puntos", ICON_16_CIR3PT, ICON_32_CIR3PT)]^C^C_circle _3p
ID_Cirttr   [_Button("Tan Tan Radio", ICON_16_CIRTTR, ICON_32_CIRTTR)]^C^C_circle _ttr
ID_Donut    [_Button("Arandela", ICON_16_DONUT, ICON_32_DONUT)]^C^C_donut

**TB_ELLIPSE
ID_Tbell    [_Toolbar("Elipse", _Floating, _Hide, 10, 200, 1)]
ID_Ellips   [_Button("Centro", ICON_16_ELLCEN, ICON_32_ELLCEN)]^C^C_ellipse;_c
ID_Ellcir   [_Button("Ejes Fin", ICON_16_ELLAE, ICON_32_ELLAE)]^C^C_ellipse
ID_Ellarc   [_Button("Arco", ICON_16_ELLARC, ICON_32_ELLARC)]^C^C_ellipse;_a

**TB_POLYGON
ID_Tbpgon   [_Toolbar("Polφgono", _Floating, _Hide, 10, 220, 1)]
ID_Rectan   [_Button("Rectßngulo", ICON_16_RECTAN, ICON_32_RECTAN)]^C^Crectang
ID_Polygo   [_Button("Polφgono", ICON_16_POLYGO, ICON_32_POLYGO)]^C^C_polygon
ID_Solid    [_Button("S≤lido 2D", ICON_16_SOLID, ICON_32_SOLID)]^C^C_solid
ID_Region   [_Button("Regi≤n", ICON_16_REGION, ICON_32_REGION)]^C^C_region
ID_Bpoly    [_Button("Contorno", ICON_16_BPOLY, ICON_32_BPOLY)]^C^C_boundary

**TB_POINT
ID_TbPoint  [_Toolbar("Punto", _Floating, _Hide, 10, 210, 1)]
ID_Point    [_Button("Punto", ICON_16_POINT, ICON_32_POINT)]*^C^C_point
ID_Divide   [_Button("Dividir", ICON_16_DIVIDE, ICON_32_DIVIDE)]^C^C_divide
ID_Measure  [_Button("Graduar", ICON_16_MEASUR, ICON_32_MEASUR)]^C^C_measure

**TB_BLOCK
ID_TbBlock  [_Toolbar("Bloque", _Floating, _Hide, 10, 280, 1)]
ID_Dinser   [_Button("Insertar bloque", ICON_16_DINSER, ICON_32_DINSER)]^C^C_ddinsert
ID_Block    [_Button("Bloque", ICON_16_BLOCK, ICON_32_BLOCK)]^C^C_block

**TB_HATCH
ID_Tbhatch  [_Toolbar("Sombreado", _Floating, _Hide, 10, 240, 1)]
ID_Bhatch   [_Button("Sombrear", ICON_16_BHATCH, ICON_32_BHATCH)]^C^C_bhatch
ID_Psfill   [_Button("Relleno PostScript", ICON_16_PSFILL, ICON_32_PSFILL)]^C^C_psfill

**TB_TEXT
ID_Tbtext   [_Toolbar("Texto", _Floating, _Hide, 10, 230, 1)]
ID_Mtext    [_Button("Texto", ICON_16_MTEXT, ICON_32_MTEXT)]^C^C_mtext
ID_Dtext    [_Button("Texto dinßmico", ICON_16_DTEXT, ICON_32_DTEXT)]^C^C_dtext
ID_Text     [_Button("Texto en 1 lφnea", ICON_16_TEXT, ICON_32_TEXT)]^C^C_text

**TB_MODIFY
ID_TbModify  [_Toolbar("Modificar", _Floating, _Show, 1, 245, 5)]
ID_Move      [_Button("Desplazar", ICON_16_MOVE, ICON_32_MOVE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
ID_TbCopy    [_Flyout("Copiar", ICON_16_COPYOB, ICON_32_COPYOB, _OtherIcon, ACAD.TB_COPY)]
ID_TbRotate  [_Flyout("Girar", ICON_16_ROTATE, ICON_32_ROTATE, _OtherIcon, ACAD.TB_ROTATE)]
ID_TbResize  [_Flyout("Ajustar tama±o", ICON_16_SCALE, ICON_32_SCALE, _OtherIcon, ACAD.TB_RESIZE)]
ID_TbTrim    [_Flyout("Ajustar longitud", ICON_16_TRIM, ICON_32_TRIM, _OtherIcon, ACAD.TB_TRIM)]
ID_TbBreak   [_Flyout("Partir", ICON_16_BRE1PT, ICON_32_BRE1PT, _OtherIcon, ACAD.TB_BREAK)]
ID_TbSpledi  [_Flyout("Edici≤n especial", ICON_16_SPEEDI, ICON_32_SPEEDI, _OtherIcon, ACAD.TB_SPECIAL_EDIT)]
ID_TbFeatur  [_Flyout("Operaci≤n", ICON_16_CHAMFE, ICON_32_CHAMFE, _OtherIcon, ACAD.TB_FEATURE)]
ID_TbExplode [_Flyout("Descomponer", ICON_16_EXPLOD, ICON_32_EXPLOD, _OtherIcon, ACAD.TB_EXPLODE)]
ID_Erase     [_Button("Borrar", ICON_16_ERASE, ICON_32_ERASE)]^C^C_erase

**TB_COPY
ID_TbCopy    [_Toolbar("Copiar", _Floating, _Hide, 10, 280, 1)]
ID_Copyob    [_Button("Copiar objeto", ICON_16_COPYOB, ICON_32_COPYOB)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
ID_Offset    [_Button("Equidistancia", ICON_16_OFFSET, ICON_32_OFFSET)]^C^C_offset
ID_Mirror    [_Button("Simetrφa", ICON_16_MIRROR, ICON_32_MIRROR)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
ID_Mir3d     [_Button("Simetrφa 3D", ICON_16_MIR3D, ICON_32_MIR3D)]^C^C_mirror3d
ID_Arrrec    [_Button("Matriz rectangular", ICON_16_ARRREC, ICON_32_ARRREC)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),^C^C_array;_r,^C^C_select;\_array;_p;;_r)
ID_Arrpol    [_Button("Matriz polar", ICON_16_ARRPOL, ICON_32_ARRPOL)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),^C^C_array;_p,^C^C_select;\_array;_p;;_p)
ID_Arr3dr    [_Button("Matriz 3D rectangular", ICON_16_ARR3D, ICON_32_ARR3D)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),^C^C_3darray;_r,^C^C_select;\_3darray;_p;;_r)
ID_Arr3dp    [_Button("Matriz 3D polar", ICON_16_ARR3DP, ICON_32_ARR3DP)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),^C^C_3darray;_p,^C^C_select;\_3darray;_p;;_p)

**TB_ROTATE
ID_TbRotate  [_Toolbar("Girar", _Floating, _Hide, 10, 300, 1)]
ID_Rotate    [_Button("Girar", ICON_16_ROTATE, ICON_32_ROTATE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
ID_Rot3d     [_Button("Girar 3D", ICON_16_ROT3D, ICON_32_ROT3D)]^C^C_rotate3d
ID_Align     [_Button("Alinear", ICON_16_ALIGN, ICON_32_ALIGN)]^C^C_align

**TB_RESIZE
ID_TbResize  [_Toolbar("Ajustar tama±o", _Floating, _Hide, 10, 300, 1)]
ID_Stretch   [_Button("Estirar", ICON_16_STRETC, ICON_32_STRETC)]^C^C_stretch
ID_Scale     [_Button("Escala", ICON_16_SCALE, ICON_32_SCALE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
ID_Length    [_Button("Longitud", ICON_16_LENGTH, ICON_32_LENGTH)]^C^C_lengthen
ID_Change    [_Button("Punto", ICON_16_CHANGE, ICON_32_CHANGE)]^C^C_change

**TB_TRIM
ID_TbTrim    [_Toolbar("Ajustar longitud", _Floating, _Hide, 10, 320, 1)]
ID_Trim      [_Button("Recortar", ICON_16_TRIM, ICON_32_TRIM)]^C^C_trim
ID_Extend    [_Button("Alargar", ICON_16_EXTEND, ICON_32_EXTEND)]^C^C_extend

**TB_BREAK
ID_TbBreak   [_Toolbar("Partir", _Floating, _Hide, 10, 320, 1)]
ID_Bre1pt    [_Button("1 punto", ICON_16_BRE1PT, ICON_32_BRE1PT)]^C^C_break \@
ID_Bre1ps    [_Button("1 pto. designaci≤n", ICON_16_BRE1PS, ICON_32_BRE1PS)]^C^C_break \_f \@
ID_Bre2pt    [_Button("2 puntos", ICON_16_BRE2PT, ICON_32_BRE2PT)]^C^C_break
ID_Bre2ps    [_Button("2 ptos. designaci≤n", ICON_16_BRE2PS, ICON_32_BRE2PS)]^C^C_break \_f

**TB_SPECIAL_EDIT
ID_TbSpledi  [_Toolbar("Edici≤n especial", _Floating, _Hide, 10, 320, 1)]
ID_Pedit     [_Button("Editar polilφnea", ICON_16_PEDIT, ICON_32_PEDIT)]^C^C_pedit
ID_Mledit    [_Button("Editar lφnea m·ltiple", ICON_16_MLEDIT, ICON_32_MLEDIT)]^C^C_mledit
ID_Spledi    [_Button("Editar Spline", ICON_16_SPLEDI, ICON_32_SPLEDI)]^C^C_splinedit
ID_TexEdi    [_Button("Editar texto", ICON_16_TEXEDI, ICON_32_TEXEDI)]^C^C_ddedit
ID_Hatedi    [_Button("Editar sombreado", ICON_16_HATEDI, ICON_32_HATEDI)]^C^C_hatchedit

**TB_FEATURE
ID_TbFeatur  [_Toolbar("Operaci≤n", _Floating, _Hide, 10, 320, 1)]
ID_Chamfe    [_Button("Chaflßn", ICON_16_CHAMFE, ICON_32_CHAMFE)]^C^C_chamfer
ID_Fillet    [_Button("Empalme", ICON_16_FILLET, ICON_32_FILLET)]^C^C_fillet

**TB_EXPLODE
ID_TbExplode [_Toolbar("Descomp", _Floating, _Hide, 10, 320, 1)]
ID_Explode   [_Button("Descomp", ICON_16_EXPLOD, ICON_32_EXPLOD)]^C^C_explode
ID_Union     [_Button("Uni≤n", ICON_16_UNION, ICON_32_UNION)]^C^C_union
ID_Subtra    [_Button("Diferencia", ICON_16_SUBTRA, ICON_32_SUBTRA)]^C^C_subtract
ID_Inters    [_Button("Intersecci≤n", ICON_16_INTERS, ICON_32_INTERS)]^C^C_intersect

**TB_DIMENSIONING
ID_TbDims    [_Toolbar("Acotar", _Floating, _Hide, 20, 380, 1)]
ID_DimLin    [_Button("Lineal", ICON_16_DIMLIN, ICON_32_DIMLIN)]^C^C_dimlinear
ID_DimAli    [_Button("Alineada", ICON_16_DIMALI, ICON_32_DIMALI)]^C^C_dimaligned
ID_TbDimRad  [_Flyout("Radial", ICON_16_DIMRAD, ICON_32_DIMRAD, _OtherIcon, ACAD.TB_DIMRADIAL)]
ID_DimAng    [_Button("Angular", ICON_16_DIMANG, ICON_32_DIMANG)]^C^C_dimangular
ID_DimOrd    [_Flyout("Coordenada", ICON_16_DIMORD, ICON_32_DIMORD, _OtherIcon, ACAD.TB_DIMORDINATE)]
ID_DimBas    [_Button("Lφnea base", ICON_16_DIMBAS, ICON_32_DIMBAS)]^C^C_dimbaseline
ID_DimCon    [_Button("Continua", ICON_16_DIMCON, ICON_32_DIMCON)]^C^C_dimcontinue
ID_DimCen    [_Button("Marca centro", ICON_16_DIMCEN, ICON_32_DIMCEN)]^C^C_dimcenter
ID_DimLea    [_Button("Directriz", ICON_16_DIMLEA, ICON_32_DIMLEA)]^C^C_leader
ID_DimTol    [_Button("Tolerancia", ICON_16_TOLERA, ICON_32_TOLERA)]^C^C_tolerance
ID_TbDimText [_Flyout("Alinear texto de cota", ICON_16_DIMHOM, ICON_32_DIMHOM, _OtherIcon, ACAD.TB_DIMTEXT)]
ID_DimSty    [_Flyout("Estilos acotaci≤n", ICON_16_DIMSTY, ICON_32_DIMSTY, _OtherIcon, ACAD.TB_DIMSTYLE)]

**TB_DIMRADIAL
ID_TbDimRad  [_Toolbar("Radial", _Floating, _Hide, 20, 380, 1)]
ID_DimRad    [_Button("Radio", ICON_16_DIMRAD, ICON_32_DIMRAD)]^C^C_dimradius
ID_DimDia    [_Button("Dißmetro", ICON_16_DIMDIA, ICON_32_DIMDIA)]^C^C_dimdiameter

**TB_DIMORDINATE
ID_TbDimOrd  [_Toolbar("Coordenada", _Floating, _Hide, 20, 380, 1)]
ID_DimOrd    [_Button("Automßtica", ICON_16_DIMORD, ICON_32_DIMORD)]^C^C_dimordinate
ID_DimOrx    [_Button("Abscisas", ICON_16_DIMORX, ICON_32_DIMORX)]^C^C_dimordinate \_x
ID_DimOry    [_Button("Ordenadas", ICON_16_DIMORY, ICON_32_DIMORY)]^C^C_dimordinate \_y

**TB_DIMTEXT
ID_TbDimText [_Toolbar("Alinear texto", _Floating, _Hide, 20, 380, 1)]
ID_DimHom    [_Button("Origen", ICON_16_DIMHOM, ICON_32_DIMHOM)]^C^C_dimtedit \_h
ID_DimTro    [_Button("Rotaci≤n", ICON_16_DIMTRO, ICON_32_DIMTRO)]^C^C_dimtedit \_a
ID_DimTle    [_Button("Izquierda", ICON_16_DIMTLE, ICON_32_DIMTLE)]^C^C_dimtedit \_l
ID_DimTce    [_Button("Centro", ICON_16_DIMTCE, ICON_32_DIMTCE)]^C^C_dimoverride _dimjust 0;;\;_dimtedit \_h
ID_DimTri    [_Button("Derecha", ICON_16_DIMTRI, ICON_32_DIMTRI)]^C^C_dimtedit \_r

**TB_DIMSTYLE
ID_DimSty    [_Toolbar("Estilo acotaci≤n", _Floating, _Hide, 20, 380, 1)]
ID_DimSty    [_Button("Estilos acotaci≤n", ICON_16_DIMSTY, ICON_32_DIMSTY)]^C^C_ddim
ID_DimObl    [_Button("Oblicua", ICON_16_DIMOBL, ICON_32_DIMOBL)]^C^C_dimedit _o

**TB_SOLIDS
ID_TbSolids  [_Toolbar("S≤lidos", _Floating, _Hide, 20, 380, 1)]
ID_TbBox     [_Flyout("Prisma rectangular", ICON_16_BOX, ICON_32_BOX, _OtherIcon, ACAD.TB_BOX)]
ID_Sphere    [_Button("Esfera", ICON_16_SPHERE, ICON_32_SPHERE)]^C^C_sphere
ID_TbCylind  [_Flyout("Cilindro", ICON_16_CYLIND, ICON_32_CYLIND, _OtherIcon, ACAD.TB_CYLINDER)]
ID_TbCone    [_Flyout("Cono", ICON_16_CONE, ICON_32_CONE, _OtherIcon, ACAD.TB_CONE)]
ID_TbWedge   [_Flyout("Calce", ICON_16_WEDGE, ICON_32_WEDGE, _OtherIcon, ACAD.TB_WEDGE)]
ID_Torus     [_Button("Toroide", ICON_16_TORUS, ICON_32_TORUS)]^C^C_torus
ID_Extrud    [_Button("Extrusi≤n", ICON_16_EXTRUD, ICON_32_EXTRUD)]^C^C_extrude
ID_Revolv    [_Button("Revoluci≤n", ICON_16_REVOLV, ICON_32_REVOLV)]^C^C_revolve
ID_Slice     [_Button("Corte", ICON_16_SLICE, ICON_32_SLICE)]^C^C_slice
ID_Sectio    [_Button("Secci≤n", ICON_16_SECTIO, ICON_32_SECTIO)]^C^C_section
ID_Interf    [_Button("Interferencia", ICON_16_INTERF, ICON_32_INTERF)]^C^C_interfere
ID_Amecon    [_Button("Convertir AME", ICON_16_AMECON, ICON_32_AMECON)]^C^C_ameconvert

**TB_BOX
ID_TbBox     [_Toolbar("Prisma rectangular", _Floating, _Hide, 20, 380, 1)]
ID_Boxcen    [_Button("Centro", ICON_16_BOXCEN, ICON_32_BOXCEN)]^C^C_box _ce
ID_Boxcor    [_Button("VΘrtice", ICON_16_BOXCOR, ICON_32_BOXCOR)]^C^C_box

**TB_CYLINDER
ID_TbCylind  [_Toolbar("Cilindro", _Floating, _Hide, 20, 380, 1)]
ID_Cylell    [_Button("Elφptico", ICON_16_CYLELL, ICON_32_CYLELL)]^C^C_cylinder _e
ID_Cylcen    [_Button("Centro", ICON_16_CYLCEN, ICON_32_CYLCEN)]^C^C_cylinder

**TB_CONE
ID_TbCone    [_Toolbar("Cono", _Floating, _Hide, 20, 380, 1)]
ID_Conell    [_Button("Elφptico", ICON_16_CONELL, ICON_32_CONELL)]^C^C_cone _e
ID_Concen    [_Button("Centro", ICON_16_CONCEN, ICON_32_CONCEN)]^C^C_cone

**TB_WEDGE
ID_TbWedge   [_Toolbar("Calce", _Floating, _Hide, 20, 380, 1)]
ID_Wedcen    [_Button("Centro", ICON_16_WEDCEN, ICON_32_WEDCEN)]^C^C_wedge _ce
ID_Wedcor    [_Button("VΘrtice", ICON_16_WEDCOR, ICON_32_WEDCOR)]^C^C_wedge

**TB_SURFACES
ID_TbSurfac  [_Toolbar("Superficies", _Floating, _Hide, 10, 340, 1)]
ID_SurBox    [_Button("Prisma rectangular", ICON_16_SURBOX, ICON_32_SURBOX)]^C^Cai_box
ID_SurWed    [_Button("Calce", ICON_16_SURWED, ICON_32_SURWED)]^C^Cai_wedge
ID_SurPyr    [_Button("Pirßmide", ICON_16_SURPYR, ICON_32_SURPYR)]^C^Cai_pyramid
ID_SurCon    [_Button("Cono", ICON_16_SURCON, ICON_32_SURCON)]^C^Cai_cone
ID_SurSph    [_Button("Esfera", ICON_16_SURSPH, ICON_32_SURSPH)]^C^Cai_sphere
ID_SurDom    [_Button("C·pula", ICON_16_SURDOM, ICON_32_SURDOM)]^C^Cai_dome
ID_SurDis    [_Button("Cuenco", ICON_16_SURDIS, ICON_32_SURDIS)]^C^Cai_dish
ID_SurTor    [_Button("Toroide", ICON_16_SURTOR, ICON_32_SURTOR)]^C^Cai_torus
ID_3dface    [_Button("Cara 3D", ICON_16_3DFACE, ICON_32_3DFACE)]^C^C_3dface
ID_Edge      [_Button("Lado", ICON_16_EDGE, ICON_32_EDGE)]^C^C_edge
ID_3dmesh    [_Button("Malla 3D", ICON_16_3DMESH, ICON_32_3DMESH)]^C^C_3dmesh
ID_Revsur    [_Button("Sup. de revoluci≤n", ICON_16_REVSUR, ICON_32_REVSUR)]^C^C_revsurf
ID_Tabsur    [_Button("Sup. tabulada", ICON_16_TABSUR, ICON_32_TABSUR)]^C^C_tabsurf
ID_Rulesu    [_Button("Sup. reglada", ICON_16_RULESU, ICON_32_RULESU)]^C^C_rulesurf
ID_Edgesu    [_Button("Sup. definida por lados", ICON_16_EDGESU, ICON_32_EDGESU)]^C^C_edgesurf

**TB_EXTERNAL_REFERENCE
ID_TbXref    [_Toolbar("RefX", _Floating, _Hide, 10, 340, 1)]
ID_XreAtt    [_Button("Enlazar", ICON_16_XREATT, ICON_32_XREATT)]^C^C_xref _a
ID_XreOve    [_Button("Sobreponer", ICON_16_XREOVE, ICON_32_XREOVE)]^C^C_xref _o
ID_XreRel    [_Button("Recargar", ICON_16_XREREL, ICON_32_XREREL)]^C^C_xref _r
ID_XreDet    [_Button("Desenlazar", ICON_16_XREDET, ICON_32_XREDET)]^C^C_xref _d
ID_XreCli    [_Button("Recortar", ICON_16_XRECLI, ICON_32_XRECLI)]^C^C_xrefclip
ID_XrePat    [_Button("Camino", ICON_16_XREPAT, ICON_32_XREPAT)]^C^C_xref _p
ID_TbBind    [_Flyout("Unir", ICON_16_BIND, ICON_32_BIND, _OtherIcon, ACAD.TB_BIND)]
ID_XreLis    [_Button("Lista", ICON_16_XRELIS, ICON_32_XRELIS)]^C^C_xref _?

**TB_BIND
ID_TbBind    [_Toolbar("Unir", _Floating, _Hide, 10, 340, 1)]
ID_Bind      [_Button("Todo", ICON_16_BIND, ICON_32_BIND)]^C^C_xref _b *
ID_BinBlo    [_Button("Bloque", ICON_16_BINBLO, ICON_32_BINBLO)]^C^C_xbind _b
ID_BinLay    [_Button("Capa", ICON_16_BINLAY, ICON_32_BINLAY)]^C^C_xbind _la
ID_BinLin    [_Button("Tipo lφnea", ICON_16_BINLIN, ICON_32_BINLIN)]^C^C_xbind _lt
ID_BinTex    [_Button("Estilo texto", ICON_16_BINTEX, ICON_32_BINTEX)]^C^C_xbind _s
ID_BinDim    [_Button("Estilo acotaci≤n", ICON_16_BINDIM, ICON_32_BINDIM)]^C^C_xbind _d

**TB_ATTRIBUTE
ID_TbAttrib  [_Toolbar("Atributos", _Floating, _Hide, 10, 340, 1)]
ID_AttDef    [_Button("Definir", ICON_16_ATTDEF, ICON_32_ATTDEF)]^C^C_ddattdef
ID_AttRed    [_Button("Redefinir", ICON_16_ATTRED, ICON_32_ATTRED)]^C^C_attredef
ID_AttEdi    [_Button("Editar", ICON_16_ATTEDI, ICON_32_ATTEDI)]^C^C_ddatte
ID_AttEdg    [_Button("Edici≤n global", ICON_16_ATTEDG, ICON_32_ATTEDG)]^C^C_attedit

**TB_RENDER
ID_TbRender  [_Toolbar("Render", _Floating, _Hide, 10, 340, 1)]
ID_Hide      [_Button("Ocultar", ICON_16_HIDE, ICON_32_HIDE)]^C^C_hide
ID_Shade     [_Button("Sombra", ICON_16_SHADE, ICON_32_SHADE)]^C^C_shade
ID_Render    [_Button("Render", ICON_16_RENDER, ICON_32_RENDER)]^C^C_render
ID_Scene     [_Button("Escenas", ICON_16_SCENE, ICON_32_SCENE)]^C^C_scene
ID_Light     [_Button("Luces", ICON_16_LIGHT, ICON_32_LIGHT)]^C^C_light
ID_Rmat      [_Button("Materiales", ICON_16_RMAT, ICON_32_RMAT)]^C^C_rmat
ID_Matlib    [_Button("Biblioteca materiales", ICON_16_MATLIB, ICON_32_MATLIB)]^C^C_matlib
ID_Rpref     [_Button("Preferencias de modelizado", ICON_16_RPREF, ICON_32_RPREF)]^C^C_rpref
ID_Stats     [_Button("Estadφsticas", ICON_16_STATS, ICON_32_STATS)]^C^C_stats

**TB_EXTERNAL_DATABASE
ID_TbExtdb   [_Toolbar("Base de datos externa", _Floating, _Hide, 10, 340, 1)]
ID_Aseadm    [_Button("Administraci≤n", ICON_16_ASEADM, ICON_32_ASEADM)]^C^C_aseadmin
ID_Aserow    [_Button("Filas", ICON_16_ASEROW, ICON_32_ASEROW)]^C^C_aserows
ID_Aselin    [_Button("Vφnculos", ICON_16_ASELIN, ICON_32_ASELIN)]^C^C_aselinks
ID_Asesel    [_Button("Seleccionar objetos", ICON_16_ASESEL, ICON_32_ASESEL)]^C^C_aseselect
ID_Aseexp    [_Button("Exportar vφnculos", ICON_16_ASEEXP, ICON_32_ASEEXP)]^C^C_aseexport
ID_Asesql    [_Button("Editor SQL", ICON_16_ASESQL, ICON_32_ASESQL)]^C^C_asesqled

**TB_MISCELLANEOUS
ID_TbMisc    [_Toolbar("Varios", _Floating, _Hide, 10, 340, 1)]
ID_3desh     [_Button("Malla", ICON_16_SURMES, ICON_32_SURMES)]^C^Cai_mesh
ID_Minser    [_Button("Insertar bloques m·ltiples", ICON_16_MINSER, ICON_32_MINSER)]^C^C_minsert
ID_Oops      [_Button("Uy", ICON_16_OOPS2, ICON_32_OOPS2)]^C^C_oops
ID_Shape     [_Button("Forma", ICON_16_SHAPE, ICON_32_SHAPE)]^C^C_shape
ID_Sketch    [_Button("Boceto", ICON_16_SKETCH, ICON_32_SKETCH)]^C^C_sketch
ID_Trace     [_Button("Trazo", ICON_16_TRACE, ICON_32_TRACE)]^C^C_trace

//
//     Begin AutoCAD Image Menus
//

***image
**image_poly
[Definici≤n de variables Spline]
[acad(pm-quad,Malla cuadrßtica)]'_surftype 5
[acad(pm-cubic,Malla c·bica)]'_surftype 6
[acad(pm-bezr,Malla BΘzier)]'_surftype 8
[acad(pl-quad,Polilφnea cuadrßtica)]'_splinetype 5
[acad(pl-cubic,Polilφnea c·bica)]'_splinetype 6

**image_3DObjects
[Objetos 3D]
[acad(box3d,Prisma rectang.)]^C^Cai_box
[acad(Pyramid,Pirßmide)]^C^Cai_pyramid
[acad(Wedge,Calce)]^C^Cai_wedge
[acad(Dome,C·pula)]^C^Cai_dome
[acad(Sphere,Esfera)]^C^Cai_sphere
[acad(Cone,Cono)]^C^Cai_cone
[acad(Torus,Toroide)]^C^Cai_torus
[acad(Dish,Cuenco)]^C^Cai_dish
[acad(Mesh,Malla)]^C^Cai_mesh

**image_vporti
[Disposici≤n de ventanas en mosaico]
[acad(vport-1,Unica)]^C^C(ai_tiledvp 1 nil)
[acad(vport-3v,3 verticales)]^C^C(ai_tiledvp 3 "_V")
[acad(vport-3h,3 horizontales)]^C^C(ai_tiledvp 3 "_H")
[acad(vport-4,4 iguales)]^C^C(ai_tiledvp 4 nil)
[acad(vport-2v,2 verticales)]^C^C(ai_tiledvp 2 "_V")
[acad(vport-3r,1drcha-2izqda)]^C^C(ai_tiledvp 3 "_R")
[acad(vport-3l,1izqda-2drcha)]^C^C(ai_tiledvp 3 "_L")
[acad(vport-4l,1drcha-3izqda)]^C^C(ai_tiledvp 4 "_L")
[acad(vport-2h,2 horizontales)]^C^C(ai_tiledvp 2 "_H")
[acad(vport-3a,1arriba-2abajo)]^C^C(ai_tiledvp 3 "_A")
[acad(vport-3b,1abajo-2arriba)]^C^C(ai_tiledvp 3 "_B")
[acad(vport-4r,1izqda-3drcha)]^C^C(ai_tiledvp 4 "_R")

//
//      Begin AutoCAD Screen Menus
//

***SCREEN
**S
[AutoCAD ]^C^C^P(ai_rootmenus) ^P
[* * * * ]{S}OSNAP
[ARCHIVO ]{S}01_FILE
[ASISTIR ]{S}02_ASSIST
[VER     ]{S}03_VIEW
[DIBUJO 1]{S}04_DRAW1
[DIBUJO 2]{S}05_DRAW2
[DIB. ACO]{S}06_DRAWDIM
[CONSTRUC]{S}07_CONSTRUCT
[MODIF   ]{S}08_MODIFY
[MODIFACO]{S}09_MODDIM
[DATOS   ]{S}10_DATA
[OPCIONES]{S}11_OPTIONS
[HERRAM  ]{S}12_TOOLS

[AYUDA   ]{S}13_HELP








[AUXILIAR]{S}service
[ULTIMO  ]{S}

// The SNAP_TO menu can be called on high
// resolution displays to paint the snap
// options on the bottom of the screen menu
**SNAP_TO 28
[InterFIC]_appint

[CENtro  ]_cen
[puntoFIN]_endp
[INSercin]_ins
[INTersec]_int
[ptoMEDio]_mid
[CERcano ]_nea
[PunTO   ]_nod
[PERpen  ]_per
[CUAdran ]_qua
[RAPido  ]_qui
[TANgente]_tan
[NINguno ]_non

[DESDE   ]_from




**GRIP_EDIT 3
[Pinzam  ]
[ Edita  ]

[Desplaza]_mo
[sImetrφa]_mi
[Girar   ]_r
[esCala  ]_sc
[esTirar ]_st

[Pto base]_b
[cOpiar  ]_c
[Referenc]_r
[desHacer]_u
[Salir   ]_x
[Cancelar]^c







**01_FILE 3
[Nuevo:  ]^C^C_new

[Abre:   ]^C^C_open
[Guardar:]^C^C_qsave
[Guarcom:]^C^C_saveas

[Imprim: ]^C^C_plot

[RefX:   ]^C^C_xref
[UnirX:  ]^C^C_xbind

[IMPORTAR]{S}011_IMPORT
[EXPORTAR]{S}012_EXPORT

[GESTION ]{S}013_MANAGE

[Salir:  ]^C^C_quit





**011_IMPORT 3
[CargDXF:]^C^C_dxfin
[CargDXB:]^C^C_dxbin

[3DSin:]^C^C_3dsin
[cargSAT:]^C^C_acisin

[cargaPS:]^C^C_psin
[arrasPS:]'_psdrag
[CldadPS:]'_psquality

[PCXin:  ]^C^C_pcxin
[GIFin:  ]^C^C_gifin
[TIFFin: ]^C^C_tiffin









**012_EXPORT 3
[Bloqdis:]^C^C_wblock
[Guard12:]^C^C_saveasr12
[SalvDXF:]^C^C_dxfout

[3DSout: ]^C^C_3dsout
[ACISout:]^C^C_acisout
[SalvSTL:]^C^C_stlout

[SalvaPS:]^C^C_psout
[Pr≤loPS:]'_psprolog

[DDattEx:]^C^C_ddattext










**013_MANAGE 3
[Arx:    ]^C^C_arx

[Archivs:]^C^C_files

[Revis:  ]^C^C_audit

[Rcuprar:]^C^C_recover















**02_ASSIST 3
[desHace:]^C^C_undo
[Rehacer:]^C^C_redo

[Refent:]'_osnap

[Forzcur:]'_snap
[Rejilla:]'_grid
[Orto:   ]'_ortho

[Designa:]^C^C_select
[Filtro: ]'_filter

[Grupo   ]^C^C_group
[DesgEst:]^C^C_pickstyle

[CONSULTA]{S}021_INQUIRY

[Cancela:]^C^C^C




**021_INQUIRY 3
[List:   ]^C^C_list

[ID:     ]'_id
[Dist:   ]'_dist
[Area:   ]^C^C_area
[PropFφs:]^C^C_massprop
















**03_VIEW 3
[Redibuj:]'_redraw
[RedibT:]'_redrawall

[Zoom:   ]'_zoom
[Encuad: ]'_pan

[DDview: ]^C^C_ddview
[Planta: ]^C^C_plan
[Ptovist:]^C^C_vpoint
[Vistdin:]^C^C_dview

[Tilemod:]^C^C_tilemode
[EspcioM:]^C^C_mspace
[EspcioP:]^C^C_pspace

[Ventana:]^C^C_vports
[VentMos:]^C^C{T}
[Vm·lt:  ]^C^C_mview

[DDscpp: ]^C^C_dducsp
[DDscp:  ]^C^C_dducs
[SCP:    ]^C^C_ucs
**04_DRAW1 3
[Lφnea:  ]^C^C_line
[LφneaX: ]^C^C_xline
[Rayo:   ]^C^C_ray
[Boceto: ]^C^C_sketch

[Pol:    ]^C^C_pline
[3Dpol:  ]^C^C_3dpoly
[LφneaM: ]^C^C_mline

[Spline: ]^C^C_spline
[Arco:   ]^C^C_arc
[Cφrculo:]^C^C_circle
[Arandel:]^C^C_donut
[Elipse: ]^C^C_ellipse

[Rectßng:]^C^C_rectang
[Polφgon:]^C^C_polygon
[S≤lido: ]^C^C_solid




**05_DRAW2 3
[Punto:  ]*^C^C_point
[Divide: ]^C^C_divide
[Grad·a:]^C^C_measure

[DDinsert]^C^C_ddinsert
[Insert: ]^C^C_insert
[InsertM:]^C^C_minsert

[Forma:  ]^C^C_shape

[SUPERFIC]{S}3D
[SOLIDOS ]{S}051_SOLIDS

[TextoM: ]^C^C_mtext
[TextDin:]^C^C_dtext

[Estilo: ]^C^C_style

[Trazo:  ]^C^C_trace


**051_SOLIDS 3
[Prisrec:]^C^C_box
[Cono:   ]^C^C_cone
[Cilndro:]^C^C_cylinder
[Esfera: ]^C^C_sphere
[Toroide:]^C^C_torus
[Calce:  ]^C^C_wedge

[Extrus: ]^C^C_extrude
[Revol:  ]^C^C_revolve

[Corte:  ]^C^C_slice
[Secci≤n:]^C^C_section
[Interf: ]^C^C_interfere

[Uni≤n:  ]^C^C_union
[Diferen:]^C^C_subtract
[Intrsec:]^C^C_intersect

[ConvAME:]^C^C_ameconvert





//  IMPORTANT: The DIM menu page is a duplicate of
//  the DRAWDIM page.  Changes to one page must be
//  made to both in order to maintain consistency.
**06_DRAWDIM 3
[Lineal: ]^C^C_dimlinear
[Alinada:]^C^C_dimaligned

[Dißmetr:]^C^C_dimdiameter
[Radio:  ]^C^C_dimradius

[Angular:]^C^C_dimangular
[Coorden:]^C^C_dimordinate

[Lφnbase:]^C^C_dimbaseline
[Contin.:]^C^C_dimcontinue

[Centro: ]^C^C_dimcenter
[Directz:]^C^C_leader
[Toleran:]^C^C_tolerance

[Dcota:  ]^C^C_ddim
[Acostil:]^C^C_dimstyle







//  IMPORTANT: The DIM menu page is a duplicate of
//  the DRAWDIM page.  Changes to one page must be
//  made to both in order to maintain consistency.
**DIM 3
[Lineal: ]^C^C_dimlinear
[Alinada:]^C^C_dimaligned

[Dißmetr:]^C^C_dimdiameter
[Radio:  ]^C^C_dimradius

[Angular:]^C^C_dimangular
[Coorden:]^C^C_dimordinate

[Lφnbase:]^C^C_dimbaseline
[Contin.:]^C^C_dimcontinue

[Centro: ]^C^C_dimcenter
[Directz:]^C^C_leader
[Toleran:]^C^C_tolerance

[Dcota:  ]^C^C_ddim
[Acostil:]^C^C_dimstyle




**07_CONSTRUCT 3
[Copia:  ]$m=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
[Eqdist: ]^C^C_offset
[Simetr: ]$m=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
[Matriz: ]^C^C_array

[Chaflßn:]^C^C_chamfer
[Empalme:]^C^C_fillet

[Sombcon:]^C^C_bhatch
[Contrno:]^C^C_boundary
[Regi≤n: ]^C^C_region
[RellePS:]^C^C_psfill

[DDatDef:]^C^C_ddattdef

[3Darray:]^C^C_3darray
[Simet3D:]^C^C_mirror3d
[Gira3D: ]^C^C_rotate3d




**08_MODIFY 3
[Modifca:]^C^C_ddmodify
[Cambia: ]^C^C_change
[Ddchpro:]^C^C_ddchprop
[Desplza:]$m=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
[Gira:   ]$m=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
[Alinear:]^C^C_align
[Estira: ]$m=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_stretch,^C^C_stretch)
[Escala: ]$m=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
[Longtud:]^C^C_lengthen
[Recorta:]^C^C_trim
[Alarga: ]^C^C_extend
[Parte:  ]^C^C_break
[Editpol:]^C^C_pedit
[EditLM: ]^C^C_mledit
[EditSpl:]^C^C_splinedit
[DDedic: ]^C^C_ddedit
[EditSom:]^C^C_hatchedit
[AtrEdit:]^C^C_ddatte
[Descomp:]^C^C_explode
[Borra:  ]^C^C_erase
[íUy!:   ]^C^C_oops

**09_MODDIM 3
[AcoEdic:]^C^C_dimedit

[AcoTedi:]^C^C_dimtedit

[Acostil:]^C^C_dimstyle

[Dcota:  ]^C^C_ddim

[Remplaz:]^C^C_dimoverride













**10_DATA 3
[DDemodo:]'_ddemodes

[DDcmodo:]'_ddlmodes
[VGcapa: ]^C^C_vplayer

[Color:  ]'_color
[DDtplφn:]'_ddltype
[EstilLM:]^C^C_mlstyle
[Estilo: ]'_style
[Dcota:  ]^C^C_ddim
[Carga:  ]^C^C_load

[Unidads:]'_ddunits
[Lφmites:]'_limits
[Tiempo: ]'_time
[Estado: ]^C^C_status

[Renombr:]^C^C_ddrename
[Limpia: ]^C^C_purge



**11_OPTIONS 3
[DDamodo:]'_ddrmodes
[DDosnap:]'_ddosnap
[Coord.: ]'_coords

[DDselec:]'_ddselect
[DDgrips:]'_ddgrips

[SimbSCP:]^C^C_ucsicon
[SCPsegu:]'_ucsfollow

[VISUALIZ]{S}111_DISPLAY
[Resvist:]^C^C_viewres
[ModRege:]^C^C_regenmode
[Arrastr:]^C^C_dragmode
[EsctlEP:]'_psltscale

[Config: ]^C^C_config
[Tablero:]^C^C_tablet

[GuarAut:]'_savetime
[Var Sis:]^C^C_setvar

**111_DISPLAY 3
[Rellena:]'_fill

[ArmSpl:]'_splframe

[Atrvis: ]^C^C_attdisp

[DDptype:]'_ddptype

[Relltxt:]'_textfill

[Calitxt:]'_textqlty

[Loctxt: ]'_qtext

[EscalTL:]'_ltscale

[EsctlEP:]'_psltscale

[EscGlb: ]'_plinegen



**12_TOOLS 3
[Appload:]^C^C_appload
[Gui≤n: ]^C^C_script
[Pantext:]'_textscr

[DBMS EXT]{S}122_EXTDBMS


[Oculta: ]^C^C_hide
[SOMBRA  ]{S}shade
[RENDER  ]{S}123_RENDER
[Mrafoto:]^C^C_vslide
[Scafoto:]^C^C_mslide
[SalvImg:]^C^C_saveimg
[Rproduc:]^C^C_replay

[Ortogr: ]^C^C_spell
[CalGeom:]'_cal

[Men·:   ]^C^C_menu
[Reinici:]^C^C_reinit
[Compila:]^C^C_compile

**122_EXTDBMS 3
[Admin:  ]^C^C_aseadmin

[Filas:  ]^C^C_aserows

[Vφnclos:]^C^C_aselinks

[Selecc: ]^C^C_aseselect

[Export: ]^C^C_aseexport

[EditSQL:]^C^C_asesqled











**123_RENDER 3
[Render: ]^C^C_render

[Escenas:]^C^C_scene
[Vistas: ]^C^C_ddview
[Luces:  ]^C^C_light

[Matrial:]^C^C_rmat
[BiblMat:]^C^C_matlib

[Prefer: ]^C^C_rpref
[Estadφs:]^C^C_stats

[Config: ]^C^C_rconfig









**13_HELP 3
[Ayuda   ]'_help

[Acerca  ]'_about



















//
// Here begins the command menus
//
**SERVICE 3
[Ultimo  ]_l
[Previo  ]_p
[TODO   ]_all
[PolφgonC]_cp
[PolφgonV]_wp
[Borde   ]_f
[Grupo   ]_g
[A±adir  ]_a
[Quitar  ]_r
[desHacer]_u
[Filtros ]_'filter
.x
.y
.z
.xy
.xz
.yz
[Refent: ]'_ddosnap
[AyuDibj:]'_ddrmodes
[Entidad:]'_ddemodes
[Capa:   ]'_ddlmodes
[Grupo:  ]^C^C_group
**3D 3
[pRisrec:]^C^Cai_box
[cOno:   ]^C^Cai_cone
[cUenco: ]^C^Cai_dish
[C·pula: ]^C^Cai_dome
[Malla:  ]^C^Cai_mesh
[Pirßmid:]^C^Cai_pyramid
[Esfera: ]^C^Cai_sphere
[Toroide:]^C^Cai_torus
[cAlce:  ]^C^Cai_wedge

[3Dcara: ]^C^C_3dface
[3Dpol:  ]^C^C_3dpoly
[SupRev: ]^C^C_revsurf
[SupTab: ]^C^C_tabsurf
[SupRegl:]^C^C_rulesurf
[SupLado:]^C^C_edgesurf
[Suptab1:]'_surftab1
[Suptab2:]'_surftab2

[3Dmalla:]^C^C_3dmesh
[Pcara:  ]^C^C_pface

**3DARRAY 3
[3Darray:]^C^C_3darray

[Rectang.]_r
[Polar   ]_p

[Sφ      ]_y
[No      ]_n















**3DFACE 3
[3Dcara: ]^C^C_3dface

[Invisibl]_i

[MostLado]^P(setvar "splframe" 1)(ai_showedge_alert) ^P
[OculLado]^P(setvar "splframe" 0)(ai_hideedge_alert) ^P

[Lado:   ]^C^C_edge
[DDmodif:]^C^C_ddmodify













**3DMESH 3
[3Dmalla:]^C^C_3dmesh

[Objet3D:]^C^C_3d



















**3DPOLY 3
[3Dpol:  ]^C^C_3dpoly

[Cerrar  ]_c
[desHacer]_u

@
















**AI_BOX 3
[Prisrec:]^C^C_ai_box

[Cubo    ]_c



















**AI_CONE 3
[Cono:   ]^C^C_ai_cone

[Dißmetro]_d



















**AI_DISH 3
[Cuenco: ]^C^C_ai_dish

[Dißmetro]_d



















**AI_DOME 3
[C·pula: ]^C^C_ai_dome

[Dißmetro]_d



















**AI_MESH 3
[Malla:  ]^C^C_ai_mesh





















**AI_PYRAMID 3
[Pirßmid:]^C^C_ai_pyramid

[Tetraedr]_t

[Arista  ]_r
[VΘrtice ]_t
















**AI_SPHERE 3
[Esfera: ]^C^C_ai_sphere

[Dißmetro]_d



















**AI_TORUS 3
[Toroide:]^C^C_ai_torus

[Dißmetro]_d



















**AI_WEDGE 3
[Calce:  ]^C^C_ai_wedge





















**ALIGN 3
[Alinear:]^C^C_align





















**AMECONVERT 3
[ConvAME:]^C^C_ameconvert





















**APERTURE 3
[Aprtura:]'_aperture

[DDosnap:]'_ddosnap

[Pickbox:]'_pickbox

















**ARC 3
[Arco:   ]^C^C_arc

[3puntos ]\\
[In,C,Fin]\_c \
[In,C,Ang]\_c \_a
[In,C,Lon]\_c \_l
[In,F,Ang]\_e \_a
[In,F,Dir]\_e \_d
[In,F,Rad]\_e \_r
[C,In,Fin]_c \\
[C,In,Ang]_c \\_a
[C,In,Lon]_c \\_l

[ContArc:]^C^C_arc ;
[ContLφn:]^C^C_line ;







**AREA 3
[Area:   ]^C^C_area

[Objeto  ]_o
[Adicion ]_a
[Sustraer]_s

[Contorno]^C^C_boundary















**ARRAY 3
[Matriz: ]^C^C_array



[Rectang ]_r
[Polar   ]_p

[Sφ      ]_y
[No      ]_n













**ATTDEF 3
[Atrdef: ]^C^C_attdef
[DDattdf:]^C^C_ddattdef

[Invisibl]_i
[Constant]_c
[Verifica]_v
[Predef  ]_p
[Ajustar ]_j
[aLinear ]_an
[Situar  ]_f
[Centrar ]_c
[Rodear  ]_m
[Derecha ]_r
[SIZqda  ]_tl
[SCentro ]_tc
[SDerecha]_tr
[MIzqda ]_ml
[MCentro ]_mc
[MDerecha]_mr
[IIzqda  ]_bl
[ICentro ]_bc
[IDerecha]_br
**ATTDISP 3
[Atrvis: ]'_attdisp

[Normal  ]_n
[ACT     ]_on
[DES     ]_of

















**ATTEDIT 3
[Atredit:]^C^C_attedit

[Ddatte: ]^C^C_ddatte

[Sφ      ]_y
[No      ]_n

[Valor   ]_v
[Posici≤n]_p
[Altura  ]_h
[aNgulo  ]_a
[Estilo  ]_s
[Capa    ]_l
[cOlor   ]_c
[Signte. ]_n

[DgColor ](acad_colordlg 256)





**ATTEXT 3
[Atrext  ]^C^C_attext

[Ddattext]^C^C_ddattext

[CDF     ]_c
[SDF     ]_s
[DXF     ]_d
[Entidads]_e














**AUDIT 3
[Revsi≤n:]^C^C_audit

[Sφ      ]_y
[No      ]_n

[Auditct:]'_auditctl
















**BASE 3
[Base:   ]^C^C_base

[Blqdisc:]^C^C_wblock



















**BLOCK 3
[Bloque: ]^C^C_block


[Lista?  ]?
[Sφ      ]_y

[Uy:     ]^C^C_oops















**BOX 3
[Prisrct:]^C^C_box

[Centro  ]_ce



















**BREAK 3
[Parte:  ]^C^C_break

[Primer  ]_f
@

[Ind2║Pto]\\
[Ind. Pto]\@
[Ind2Ptos]\_first \
[Ind1║Pto]\_first \@













**CHAMFER 3
[Chaflßn:]^C^C_chamfer

[Distanc.]_d \\_chamfer
[Dist = 0]_d 0 0 _chamfer
[Angulo  ]_a \\ _chamfer
[Polilφn.]_p

[Recortar]_t
[No recor]_n

[MΘtodo  ]_m
[Distan. ]_d
[Angulo  ]_a









**CHANGE 3
[Cambia: ]^C^C_change

[DDchprp:]^C^C_ddchprop
[DDmodif:]^C^C_ddmodify



[cOlor   ]_p _c (acad_colordlg 256)
[eLev.   ]_p _e
[Capa    ]_p _la
[Tlφnea  ]_p _lt
[Alt-obj.]_p _t










**CHPROP 3
[Cam.prp:]^C^C_chprop

[DDchprp:]^C^C_ddchprop
[DDmodif:]^C^C_ddmodify



[cOlor   ]_c
[Capa   ]_la
[Tlφnea  ]_lt
[Alt-obj.]_t

[DgColor ](acad_colordlg 256)









**CIRCLE 3
[Cφrculo:]^C^C_circle

[Cen,Rad ]\\

[Cen,Dia ]\_d

[2 Ptos. ]_2p \
[3 Ptos. ]_3p \\

[TTR     ]_ttr
[TTT:    ]_3p _tan \_tan \_tan \

[Cop. Rad]^C^C_circlerad '_cal rad;










**COLOR 3
[Color:  ]'_color

[Porcapa ]_bylayer
[Porbloq.]_byblock
[Rojo    ]_re
[Amarillo]_ye
[Verde   ]_gr
[Ciano   ]_cy
[Azul    ]_bl
[Magenta ]_ma
[Blanco  ]_wh

[DgColor ]'_color (acad_colordlg 256)

[GamaCol ]^C^C_vslide acad(chroma)
[Redibuja]^C^C_redraw






**CONE 3
[Cono:   ]^C^C_cone

[Elφptico]_e



















**COPY 3
[Copia:  ]^C^C_copy



[M·ltiple]_m

















**CYLINDER 3
[Cilin.: ]^C^C_cylinder

[Elφptico]_e



















**DDCHPROP 3
[DDchprp:]^C^C_ddchprop





















**DDEDIT 3
[DDedic: ]^C^C_ddedit

[DDmodif:]^C^C_ddmodify



















**DIMALIGNED 3
[AcoAlin:]^C^C_dimaligned

[Texto   ]_t
[Angulo  ]_a


















**DIMANGULAR 3
[AcoAngl:]^C^C_dimangular

[Texto   ]_t
[Angulo  ]_a


















**DIMBASELINE 3
[AcoBase:]^C^C_dimbaseline





















**DIMCENTER 3
[AcoCent:]^C^C_dimcenter





















**DIMCONTINUE 3
[AcoCont:]^C^C_dimcontinue





















**DIMDIAMETER 3
[AcoDiam:]^C^C_dimdiameter





















**DIMEDIT 3
[AcoEdic:]^C^C_dimedit

[Inicio  ]_h
[Cambtxt ]_n
[Girar   ]_r
[Oblicua ]_o
















**DIMLINEAR 3
[AcoLinl:]^C^C_dimlinear

[Horizont]_h
[Vertical]_v

[Texto]_t
[Angulo  ]_a















**DIMORDINATE 3
[AcoCoor ]^C^C_dimordinate

[Abscisa ]_x
[Ordenada]_y


















**DIMOVERRIDE 3
[AcoRem.:]^C^C_dimoverride

[Borrar  ]_c



















**DIMRADIUS 3
[AcoRad.:]^C^C_dimradius





















**DIMSTYLE 3
[AcoEstil]^C^C_dimstyle

[Guardar ]_s
[Restit  ]_r
[Estado  ]_st
[Variabls]_v
[Aplicar]_a
[Lista?  ]?














**DIMTEDIT 3
[AcoTedic]^C^C_dimtedit

[iZqda.  ]_l
[Derecha ]_r
[Inicio  ]_h
[Angulo  ]_a
















**DIST 3
[Dist:   ]^C^C_dist





















**DIVIDE 3
[Divide:]^C^C_divide

[Bloque  ]_b

[Sφ      ]_y
[No      ]_n
















**DONUT 3
[Arandel:]^C^C_donut





















**DRAGMODE 3
[Arrast.:]'_dragmode

[ACT     ]_on
[DES     ]_off

[aUto    ]_a
















**DTEXT 3
[Txtodin:]^C^C_dtext
[textoM: ]^C^C_mtext

[Estilo  ]_s

[Ajustar ]_j
[aLinear ]_a
[Centrar ]_c
[Situar  ]_f
[Rodear  ]_m
[Derecha ]_r
[SIZqda  ]_tl
[SCentro ]_tc
[SDerecha]_tr
[MIzqda  ]_ml
[MCentro ]_mc
[MDerecha]_mr
[IIzqda  ]_bl
[ICentro ]_bc
[IDerecha]_br

[Estilo: ]^C^C_style
**DVIEW 3
[Vistdin:]^C^C_dview

[Visdimbq]^C^C_dview ;

[Cßmara  ]_ca
[Motivo  ]_ta
[dIstan. ]_d
[Puntos  ]_po
[eNcuad. ]_pa
[Zoom    ]_z
[lAdeo   ]_tw
[deLim  ]_cl
[Ocultar ]_h
[DES     ]_off
[desHacer]_u
[Salir   ]_x

[Poster. ]_b
[Anterior]_f

[DES     ]_of

**DXFOUT 3
[SalvDXF:]^C^C_dxfout

6
16
[Objetos ]_o
[Binario ]_b


[cargDXF:]^C^C_dxfin
[cargDXB:]^C^C_dxbin












**EDGESURF 3
[Suplads:]^C^C_edgesurf





















**ELEV 3
[Elev:   ]'_elev





















**ELLIPSE 3
[Elipse: ]^C^C_ellipse

[Arco    ]_a
[Centro  ]_c
[Girar   ]_r




[Pellips:]'_pellipse












**ERASE 3
[Borra:  ]^C^C_erase

[Uy:     ]^C^C_oops



















**EXPLODE 3
[Descomp:]^C^C_explode





















**EXTEND 3
[Alarga: ]^C^C_extend

[Alarga  ]_e
[NoAlarga]_n

[Proyecc.]_p
[ Ninguno]_n
[ SCP    ]_u
[ Vista  ]_v

[desHacer]_u











**EXTRUDE 3
[Extrus.:]^C^C_extrude

[Ejeextru]_p



















**FILL 3
[Rellnar:]^C^C_fill

[ACT     ]_on
[DES     ]_of

[Regen:  ]^C^C_regen
[Regent: ]^C^C_regenall















**FILLET 3
[Empalme:]^C^C_fillet

[rAdio   ]_r
[rAdio 0 ]_r 0
[Polilφn.]_p

[Recortar]_t
[No Recor]_n














**GRID 3
[Rejilla:]'_grid
[DDamodo:]'_ddrmodes

[rej=forz]_snap
[ACT     ]_on
[DES     ]_of
[asPecto ]_a















**GROUP 3
[Grupo:  ]^C^C_group

?
[Ordenar ]_o
[A±adir  ]_a
[Eliminar]_r
[sElecc. ]_s
[Crear   ]_m

[SelEst: ]'_pickstyle












**HATCH 3
[Sombr.: ]^C^C_hatch

[Sombcon:]^C^C_bhatch

[Lista?  ]?
u
u,o
u,i
[Sφ      ]_y
[No      ]_n












**ID 3
[ID:     ]'_id





















**INSERT 3
[Insert: ]^C^C_insert

[DDinsert]^C^C_ddinsert

[AbreArch]~
[Lista?  ]?
*
[Esquina ]_c
[XYZ     ]_xy
[Arrast. ]_d












**INTERFERE 3
[Interf: ]^C^C_interfere





















**INTERSECT 3
[Intrsec:]^C^C_intersect





















**ISOPLANE 3
[Isoplan:]'_isoplane

[Izqdo.  ]_l
[Superior]_t
[Derecho ]_r

[DDamodo:]'_ddrmodes















**LAYER 3
[Capa:   ]'_layer
[DDcmodo:]'_ddlmodes
[Lista?  ]? *
[Establ. ]_m
[Def.    ]_s
[Crear   ]_n
[ACT     ]_on
[DES     ]_of
[cOlor   ]_c
[Tlφnea  ]_lt
[Inut.   ]_f
[Reut.   ]_t
[Bloq.   ]_lo
[desbLoq.]_u

[·nica ? ]?^z
[cadena *]*^z
[alpha @ ]@^z
[#dφgito ]#^z
[noalfa. ].^z
[no ~    ]~^z

**LEADER 3
[Directz:]^C^C_leader

[Format. ]_f
[desHacer]_u


















**LENGTHEN 3
[Longtud:]^C^C_lengthen

[Increm. ]_de
[Porcent.]_p
[Total   ]_t
[Dinßmica]_dy

[Angulo  ]_a
[Longitud]_l
[desHacer]_u












**LIMITS 3
[Lφmites:]^C^C_limits


[AjusLim:]'_limcheck


















**LINE 3
[Lφnea:  ]^C^C_line

[1 Lφnea:]^C^C_line \\;

[cOntinua];
[desHacer]_u
[Cerrar  ]_c
@

[ArcCont:]^C^C_arc ;












**LINETYPE 3
[tipoLφn:]'_linetype

[DDtiplφ:]'_ddltype

[Lista?  ]?
[cRear   ]_c
[Cargar  ]_l
[Definir ]_s
[Sφ      ]_y
[No      ]_n
*


[Celtscl:]'_celtscale
[Esctl:  ]'_ltscale








**LIST 3
[Lista:  ]^C^C_list





















**MASSPROP 3
[Propfφsi]^C^C_massprop





















**MEASURE 3
[Grad·a: ]^C^C_measure

[Bloque  ]_b

[Sφ      ]_y
[No      ]_n
















**MINSERT 3
[insertM:]^C^C_minsert

[DDmodif:]^C^C_ddmodify

[Lista?  ]?
[Esquina ]_c
[XYZ     ]_xyz















**MIRROR 3
[Simetrφ:]^C^C_mirror

[Simet3d:]^C^C_mirror3d

[Sφ      ]_y
[No      ]_n

[Simetxt:]'_mirrtext














**MIRROR3D 3
[Simet3D:]^C^C_mirror3d

[Objeto  ]_e
[eje Z   ]_z
[Vista   ]_v
[XY      ]_xy
[YZ      ]_yz
[ZX      ]_zx
[<3ptos> ]_3













**MLINE 3
[lφneaM: ]^C^C_mline

[Justific]_j
[eScala  ]_s
[Estilo  ]_st

[desHacer]_u
[Cerrar  ]_c
@

[EstilLM:]^C^C_mlstyle











**MOVE 3
[Dsplzar:]^C^C_move





















**MTEXT 3
[TextoM: ]^C^C_mtext

[Propieds]_p

[Justif. ]_a
[Rotaci≤n]_r
[Estilo  ]_s

[anChura ]_w
[2Ptos   ]_2p

[Estilo: ]^C^C_style










**MVIEW 3
[VistaM: ]^C^C_mview

[ACT     ]_on
[DES     ]_of
[Ocultraz]_h
[Ajustar ]_f
2
3
4
[Resttuir]_r












**OFFSET 3
[Eqdist:]^C^C_offset

[Ptoatrav]_t



















**ORTHO 3
[Orto:   ]'_ortho

[ACT    ]_on
[DES     ]_of


















**OSNAP 3
[Refent: ]'_osnap

[DDosnap ]'_ddosnap

[interFIC]_appint

[CENtro  ]_cen^z
[ptoFINal]_endp^z
[INSerc  ]_ins^z
[INTersec]_int^z
[ptoMEDio]_mid^z
[CERcano ]_nea^z
[PunTO   ]_nod^z
[PERpndic]_per^z
[CUAdrant]_qua^z
[TANgente]_tan^z
[NINguno ]_non^z
[RAPido, ]_qui,^z

[DESDE   ]_from


**PAN 3
[Encuad: ]'_pan

[Izqda : ]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) 0) 0 1) ;^P
[Derecha:]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) 0) 0 1) ;^P
[Sup:    ]'_pan ^P(trans (list 0 (* -0.5 (getvar "viewsize"))) 0 1) ;^P
[Infer: ]'_pan ^P(trans (list 0 (* 0.5 (getvar "viewsize"))) 0 1) ;^P

[Sup/Izq:]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) (* -0.6 (getvar "viewsize"))) 0 1) ;^P
[Sup/Der:]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) (* -0.6 (getvar "viewsize"))) 0 1) ;^P
[Inf/Izq:]'_pan ^P(trans (list (* 0.5 (getvar "viewsize")) (* 0.6 (getvar "viewsize"))) 0 1) ;^P
[Inf/Der:]'_pan ^P(trans (list (* -0.5 (getvar "viewsize")) (* 0.6 (getvar "viewsize"))) 0 1) ;^P


[Zoom:   ]'_zoom
[DDview: ]^C^C_ddview







**PEDIT 3
[Editpol:]^C^C_pedit
[Cortar  ]_b
[Cerrar  ]_c
[Prev/ABa]_d
[EditVΘrt]_e
[aDaptar ]_f
[Ejecutar]_g
[Insertar]_i
[Juntar  ]_j
[genTlφn ]_l
[Desp/Abr]_m
[siG/Abr ]_n
[Abrir   ]_o
[Preceden]_p
[Regen/De]_r
[REpant. ]_re
[Spln/Ali]_s
[Tan     ]_t
[dsH/ARib]_u
[Grosor  ]_w
[Salir   ]_x
[VarPol. ]{I}image_poly $I=*
**PLAN 3
[Planta: ]^C^C_plan

[Actual  ]_c
[SCP     ]_u
[Univer. ]_w

[Seguir: ]'_ucsfollow















**PLINE 3
[Pol:    ]^C^C_pline

[Arco    ]_a
[Cerrar  ]_c
[Mitdgro ]_h
[Longitud]_l
[desHacer]_u
[Grosor  ]_w

[Angulo  ]_a
[Centro  ]_ce
[Cerrar  ]_cl
[Direcc. ]_d \
[Lφnea   ]_l
[Radio   ]_r
[2║ Pto. ]_s \

[Editpol ]^C^C_pedit




**POINT 3
[Punto:  ]*^C^C_point

[DDptype:]'_ddptype

[Pdmode: ]'_pdmode
[Pdsize: ]'_pdsize
















**POLYGON 3
[Polφgon:]^C^C_polygon

[Lado    ]\_e

[Inscrit ]\\_i
[Circuns ]\\_c
















**PSFILL 3
[RllnaPS:]^C^C_psfill

[Lista?  ]?



















**PSOUT 3
[salvaPS:]^C^C_psout

[Pantalla]_d
[eXtens. ]_e
[Lφmites ]_l
[Vista   ]_v
[vEntana ]_w

[Ninguno ]_n
[EPSI    ]_e
[TIFF    ]_t
128
256
512
[pulgads ]_i
[mm      ]_m
[ajustar ]_f

[PSprolog]'_psprolog
[Psdrag  ]'_psdrag
[PSqualit]'_psquality

**PURGE 3
[Limpia: ]^C^C_purge

[Bloques ]_b
[eCots   ]_d
[cApas   ]_la
[tLφneas ]_lt
[Formas  ]_sh
[Estilos ]_st
[Todo    ]_a

[Sφ      ]_y
[No      ]_n










**RAY 3
[Rayo:   ]^C^C_ray





















**RECTANG 3
[Rectßng:]^C^C_rectang





















**RENAME 3
[Rnombra:]^C^C_rename

[renomDD:]^C^C_ddrename

[Bloque  ]_b
[ECot    ]_d
[cApa    ]_la
[tLφnea  ]_lt
[Estilo  ]_s
[SCP     ]_u
[vIsta   ]_vi
[Ventana ]_vp










**REVOLVE 3
[Revolu: ]^C^C_revolve

[Objeto  ]_o
[ejeX    ]_x
[ejeY    ]_y

















**REVSURF 3
[SupRev: ]^C^C_revsurf





















**ROTATE 3
[Gira:   ]^C^C_rotate

[Referenc]_r

[Gira3D: ]^C^C_rotate3d

















**ROTATE3D 3
[Gira3d: ]^C^C_rotate3d

[Objeto  ]_e
[Ultimo  ]_l
[Vista   ]_v
[ejeX    ]_x
[ejeY    ]_y
[ejeZ    ]_z
[<2ptos> ]_2p













**RULESURF 3
[Suprgla:]^C^C_rulesurf





















**ARX 3
[Arx:    ]^C^C_arx

[Load    ]_l
[PopCmds ]_p
[Unload  ]_u
[List?   ]?

[Clases  ]_cl
[Comandos]_c
[Objetos ]_o
[Programa]_p
[Servicio]_s










**SCALE 3
[Escala: ]^C^C_scale

[Referenc]_r



















**SECTION 3
[Secci≤n:]^C^C_section

[Objeto  ]_o
[EjeZ    ]_z
[Vista   ]_v
[XY      ]_xy
[YZ      ]_yz
[ZX      ]_zx
[3 ptos  ]_3p













**SELECT 3
[Designa:]^C^C_select





















**SETVAR 3
[Modivar:]'_setvar

[Lista?  ]?
*


















**SHADE 3
[Sombra: ]^C^C_shade

[Bordesom]
[ 256 col]'_shadedge 0
[ 256bord]'_shadedge 1
[ Oculto ]'_shadedge 2
[ Rellno ]'_shadedge 3

[Sombradi]'_shadedif

[Regen:  ]^C^C_regen











**SHAPE 3
[Forma:  ]^C^C_shape

[Lista?  ]?

[Leer:   ]^C^C_load

















**SKETCH 3
[Boceto: ]^C^C_sketch

[Contin. ]c
[Borrar  ]e
[Memo    ]r

[Salir   ]x
[Suprim  ]q

[BocpACT:]'_skpoly 1
[BocpDES:]'_skpoly 0











**SLICE 3
[Corte:  ]^C^C_slice

[Objeto  ]_o
[ejeZ    ]_z
[Vista   ]_v
[XY      ]_xy
[YZ      ]_yz
[ZX      ]_zx
[3ptos   ]_3p













**SNAP 3
[Forzcur:]'_snap
[DDamods:]'_ddrmodes

[ACT     ]_on
[DES     ]_of
[asPecto ]_a
[Rotaci≤n]_r

[Estilo  ]_s
[ Iso    ]_i
[ Estßnd.]_s

[Conmutar]^b









**SOLID 3
[S≤lido: ]^C^C_solid





















**SPHERE 3
[Esfera: ]^C^C_sphere

[Dißmetro]_d



















**SPLINE 3
[Spline: ]^C^C_spline

[Objeto  ]_o

[Cerrar  ]_c
[AjusTol ]_f

[SplFrame]'_splframe














**STRETCH 3
[Estira: ]^C^C_stretch





















**STYLE 3
[Estilo: ]'_style


[Lista?  ]?

[Sφ      ]_y
[No      ]_n

[TextoM: ]^C^C_mtext
[Txtodin:]^C^C_dtext












**SUBTRACT 3
[Dfrencia]^C^C_subtract





















**TABLET 3
[Tablero:]^C^C_tablet

[CALibrar]_cal
[ConFiG  ]_cfg 4 \\\25 9 \\\11 9 \\\9 13 \\\25 7 _y \\_n
[Reconf. ]_cfg 4 _y \\\;;\\\;;\\\;;\\\;;_y \\
[Reconfdf]_cfg 4 _y \\\25 9 \\\11 9 \\\9 13 \\\25 7 _y \\

[ACT     ]_on
[DES     ]_of
[Sφ      ]_y
[No      ]_n

[Ortogonl]_o
[Afφn    ]_a
[Proyec  ]_p







**TABSURF 3
[SupTab: ]^C^C_tabsurf





















**TEXT 3
[Texto:  ]^C^C_text
[TextoM: ]^C^C_mtext

[Estilo  ]_s

[Ajustar ]_j
[aLinear ]_a
[Centrar ]_c
[Situar  ]_f
[Rodear  ]_m
[Derecha ]_r
[SIZqda  ]_tl
[SCentro ]_tc
[SDerecha]_tr
[MIzqda  ]_ml
[MCentro ]_mc
[MDerecha]_mr
[IIzqda  ]_bl
[ICentro ]_bc
[IDerecha]_br
[Estilo: ]^C^C_style

**TORUS 3
[Toroide:]^C^C_torus

[Dißmetro]_d



















**TRIM 3
[Recorta:]^C^C_trim

[Alarga  ]_e
[NoAlarga]_n

[Proyecc.]_p
[ Ninguno]_n
[ SCP    ]_u
[Vista   ]_v

[desHacer]_u











**UCS 3
[SCP:    ]^C^C_ucs

[Origen  ]_o
[vEctorz ]_z
[3p      ]_3p
[X       ]_x
[Y       ]_y
[Z       ]_z
[oBjeto  ]_e
[Vista   ]_v
[Previo  ]_p
[Restit  ]_r
[Guardar ]_s
[Suprim  ]_d
[Lista?  ]?
[Univ    ]_w

[DDscp:  ]^C^C_dducs
[DDscpp: ]^C^C_dducsp
[Seguir: ]'_ucsfollow
[Simbscp:]^C^C_ucsicon

**UCSICON 3
[Simbscp:]^C^C_ucsicon

[ACT     ]_on
[DES     ]_of

[Todas   ]_all
[Origen  ]_o
[Noorigen]_n














**UNDO 3
[DSHACE: ]^C^C_undo

[Atrßs 1:]^C^C_undo 1

[Auto    ]_a
[Retorno ]_b
[Fin     ]_e
[Grupo   ]_g
[Marca   ]_m
[Control ]_c

[Sφ      ]_y
[No      ]_n

[Rhacer: ]^C^C_redo







**UNION 3
[Uni≤n:  ]^C^C_union





















**VIEW 3
[Vista:  ]'_view

[Lista?  ]_?
[Suprimir]_d
[Restitu ]_r
[Guardar ]_s
[Ventana ]_w


[Encua:  ]'_pan
[Zoom:   ]'_zoom

[DDview: ]^C^C_ddview
[Planta:]^C^C_plan
[Vistdin:]^C^C_dview







**VIEWPORTS 3
[Vntanas:]^C^C_vports
[DDvtana:]^C^C{T}

[Guardar ]_s
[Rstituir]_r
[Suprimir]_d
[Juntar  ]_j
[Unica   ]_s
?
2
3
4

[Horizntl]_h
[Vertical]_v
[Arriba  ]_a
[Abajo   ]_b
[Derecha ]_l
[Izqda   ]_r



**VIEWRES 3
[Resvsta:]^C^C_viewres

[No      ]_n
[Sφ      ]_y

1
2
5
10
20
50
100
200
500
1000
2000
5000
10000
20000

[RegnAuto]'_regenauto

**VPLAYER 3
[Vgcapa: ]^C^C_vplayer

?
[Inutiliz]_f
[reUtilz ]_t
[reStable]_r
[Creainut]_n
[Vgvisdef]_v


[Todo    ]_all
[Selec.  ]_s
[Actual  ]_c









**VPOINT 3
[Ptovist:]^C^C_vpoint

[Rotaci≤n]_r
[Ejes    ] ;
[Vector  ]

[Superior]_non *0,0,1
[Frontal ]_non *0,-1,0
[Izqda   ]_non *-1,0,0
[Derecha ]_non *1,0,0
[Poster  ]_non *0,1,0

[Iso SO  ]_non *-1,-1,1
[Iso SE]_non *1,-1,1
[Iso NE  ]_non *1,1,1
[Iso NO  ]_non *-1,1,1

[DDvpoint]^C^C_ddvpoint
[DDview: ]^C^C_ddview
[Planta: ]^C^C_plan
[Vistdin:]^C^C_dview

**VPORTS 3
[Vntanas:]^C^C_vports
[DDvtana:]^C^C{T}

[Guardar ]_s
[Rstituir]_r
[Suprimir]_d
[Juntar  ]_j
[Unica   ]_s
?
2
3
4

[Horizntl]_h
[Vertical]_v
[Arriba  ]_a
[Abajo   ]_b
[Izqda   ]_l
[Derecha ]_r



**VSLIDE 3
[Mirafot:]^C^C_vslide

[Rdibuja:]'_redraw

[Sacafot:]^C^C_mslide

















**WBLOCK 3
[Blqdisc:]^C^C_wblock

=
*


[Base:   ]^C^C_base















**WEDGE 3
[Calce:  ]^C^C_wedge

[Centro  ]_ce



















**XBIND 3
[UnirX:  ]^C^C_xbind

[Bloque  ]_b
[ECot    ]_d
[Capa    ]_la
[Tlφnea  ]_lt
[EStilotx]_s

[RefX:   ]^C^C_xref













**XLINE 3
[LφneaX: ]^C^C_xline

[Horizntl]_h
[Vertical]_v
[Angulo  ]_a
[Bisctriz]_b
[Desfasar]_o


[Rayo:   ]^C^C_ray












**XREF 3
[RefX:   ]^C^C_xref

[Lista?  ]?
[Unir    ]_b
[Dsnlazar]_d
[Camino  ]_p
[Recargar]_r
[Sobrpner]_o
[Enlazar ]_a

[Visretn:]'_visretain
[RefXCtl:]'_xrefctl










**ZOOM 3
[Zoom:   ]'_zoom

[Todo    ]_a
[Centro  ]_c
[Dinßmico]_d
[Extens. ]_e
[Izqda   ]_l
[Previo]_p
[vMßx    ]_v
[Ventana ]_w

[Sφ      ]_y
[No      ]_n

[Ampliar ]2x
[Reducir ].5x
[Lφmites ]^P(getvar "limmin") (getvar "limmax") ^P





**ENDSCREEN

//
//      Begin AutoCAD Tablet Menus
//
//      This is the TABLET1 menu.  You may put your own
//      macros and menu items here in these spaces.
//      All of the "blank" line items actually contain one
//      space so that a RETURN is issued when you pick any
//      of them from the tablet.  Remove them if you want nothing
//      to happen when they are selected, or place your own
//      macros in their place.

***TABLET1
**TABLET1STD
<1>[A-1]
<2>[A-2]
<3>[A-3]
<4>[A-4]
<5>[A-5]
<6>[A-6]
<7>[A-7]
<8>[A-8]
<9>[A-9]
<10>[A-10]
<11>[A-11]
<12>[A-12]
<13>[A-13]
<14>[A-14]
<15>[A-15]
<16>[A-16]
<17>[A-17]
<18>[A-18]
<19>[A-19]
<20>[A-20]
<21>[A-21]
<22>[A-22]
<23>[A-23]
<24>[A-24]
<25>[A-25]
<26>[B-1]
<27>[B-2]
<28>[B-3]
<29>[B-4]
<30>[B-5]
<31>[B-6]
<32>[B-7]
<33>[B-8]
<34>[B-9]
<35>[B-10]
<36>[B-11]
<37>[B-12]
<38>[B-13]
<39>[B-14]
<40>[B-15]
<41>[B-16]
<42>[B-17]
<43>[B-18]
<44>[B-19]
<45>[B-20]
<46>[B-21]
<47>[B-22]
<48>[B-23]
<49>[B-24]
<50>[B-25]
<51>[C-1]
<52>[C-2]
<53>[C-3]
<54>[C-4]
<55>[C-5]
<56>[C-6]
<57>[C-7]
<58>[C-8]
<59>[C-9]
<60>[C-10]
<61>[C-11]
<62>[C-12]
<63>[C-13]
<64>[C-14]
<65>[C-15]
<66>[C-16]
<67>[C-17]
<68>[C-18]
<69>[C-19]
<70>[C-20]
<71>[C-21]
<72>[C-22]
<73>[C-23]
<74>[C-24]
<75>[C-25]
<76>[D-1]
<77>[D-2]
<78>[D-3]
<79>[D-4]
<80>[D-5]
<81>[D-6]
<82>[D-7]
<83>[D-8]
<84>[D-9]
<85>[D-10]
<86>[D-11]
<87>[D-12]
<88>[D-13]
<89>[D-14]
<90>[D-15]
<91>[D-16]
<92>[D-17]
<93>[D-18]
<94>[D-19]
<95>[D-20]
<96>[D-21]
<97>[D-22]
<98>[D-23]
<99>[D-24]
<100>[D-25]
<101>[E-1]
<102>[E-2]
<103>[E-3]
<104>[E-4]
<105>[E-5]
<106>[E-6]
<107>[E-7]
<108>[E-8]
<109>[E-9]
<110>[E-10]
<111>[E-11]
<112>[E-12]
<113>[E-13]
<114>[E-14]
<115>[E-15]
<116>[E-16]
<117>[E-17]
<118>[E-18]
<119>[E-19]
<120>[E-20]
<121>[E-21]
<122>[E-22]
<123>[E-23]
<124>[E-24]
<125>[E-25]
<126>[F-1]
<127>[F-2]
<128>[F-3]
<129>[F-4]
<130>[F-5]
<131>[F-6]
<132>[F-7]
<133>[F-8]
<134>[F-9]
<135>[F-10]
<136>[F-11]
<137>[F-12]
<138>[F-13]
<139>[F-14]
<140>[F-15]
<141>[F-16]
<142>[F-17]
<143>[F-18]
<144>[F-19]
<145>[F-20]
<146>[F-21]
<147>[F-22]
<148>[F-23]
<149>[F-24]
<150>[F-25]
<151>[G-1]
<152>[G-2]
<153>[G-3]
<154>[G-4]
<155>[G-5]
<156>[G-6]
<157>[G-7]
<158>[G-8]
<159>[G-9]
<160>[G-10]
<161>[G-11]
<162>[G-12]
<163>[G-13]
<164>[G-14]
<165>[G-15]
<166>[G-16]
<167>[G-17]
<168>[G-18]
<169>[G-19]
<170>[G-20]
<171>[G-21]
<172>[G-22]
<173>[G-23]
<174>[G-24]
<175>[G-25]
<176>[H-1]
<177>[H-2]
<178>[H-3]
<179>[H-4]
<180>[H-5]
<181>[H-6]
<182>[H-7]
<183>[H-8]
<184>[H-9]
<185>[H-10]
<186>[H-11]
<187>[H-12]
<188>[H-13]
<189>[H-14]
<190>[H-15]
<191>[H-16]
<192>[H-17]
<193>[H-18]
<194>[H-19]
<195>[H-20]
<196>[H-21]
<197>[H-22]
<198>[H-23]
<199>[H-24]
<200>[H-25]
<201>[I-1]
<202>[I-2]
<203>[I-3]
<204>[I-4]
<205>[I-5]
<206>[I-6]
<207>[I-7]
<208>[I-8]
<209>[I-9]
<210>[I-10]
<211>[I-11]
<212>[I-12]
<213>[I-13]
<214>[I-14]
<215>[I-15]
<216>[I-16]
<217>[I-17]
<218>[I-18]
<219>[I-19]
<220>[I-20]
<221>[I-21]
<222>[I-22]
<223>[I-23]
<224>[I-24]
<225>[I-25]
**ENDTAB1

//      This is the alternate TABLET1 menu.

**TABLET1ALT
<1>[A-1]
<2>[A-2]
<3>[A-3]
<4>[A-4]
<5>[A-5]
<6>[A-6]
<7>[A-7]
<8>[A-8]
<9>[A-9]
<10>[A-10]
<11>[A-11]
<12>[A-12]
<13>[A-13]
<14>[A-14]
<15>[A-15]
<16>[A-16]
<17>[A-17]
<18>[A-18]
<19>[A-19]
<20>[A-20]
<21>[A-21]
<22>[A-22]
<23>[A-23]
<24>[A-24]
<25>[A-25]
<26>[B-1]
<27>[B-2]
<28>[B-3]
<29>[B-4]
<30>[B-5]
<31>[B-6]
<32>[B-7]
<33>[B-8]
<34>[B-9]
<35>[B-10]
<36>[B-11]
<37>[B-12]
<38>[B-13]
<39>[B-14]
<40>[B-15]
<41>[B-16]
<42>[B-17]
<43>[B-18]
<44>[B-19]
<45>[B-20]
<46>[B-21]
<47>[B-22]
<48>[B-23]
<49>[B-24]
<50>[B-25]
<51>[C-1]
<52>[C-2]
<53>[C-3]
<54>[C-4]
<55>[C-5]
<56>[C-6]
<57>[C-7]
<58>[C-8]
<59>[C-9]
<60>[C-10]
<61>[C-11]
<62>[C-12]
<63>[C-13]
<64>[C-14]
<65>[C-15]
<66>[C-16]
<67>[C-17]
<68>[C-18]
<69>[C-19]
<70>[C-20]
<71>[C-21]
<72>[C-22]
<73>[C-23]
<74>[C-24]
<75>[C-25]
<76>[D-1]
<77>[D-2]
<78>[D-3]
<79>[D-4]
<80>[D-5]
<81>[D-6]
<82>[D-7]
<83>[D-8]
<84>[D-9]
<85>[D-10]
<86>[D-11]
<87>[D-12]
<88>[D-13]
<89>[D-14]
<90>[D-15]
<91>[D-16]
<92>[D-17]
<93>[D-18]
<94>[D-19]
<95>[D-20]
<96>[D-21]
<97>[D-22]
<98>[D-23]
<99>[D-24]
<100>[D-25]
<101>[E-1]
<102>[E-2]
<103>[E-3]
<104>[E-4]
<105>[E-5]
<106>[E-6]
<107>[E-7]
<108>[E-8]
<109>[E-9]
<110>[E-10]
<111>[E-11]
<112>[E-12]
<113>[E-13]
<114>[E-14]
<115>[E-15]
<116>[E-16]
<117>[E-17]
<118>[E-18]
<119>[E-19]
<120>[E-20]
<121>[E-21]
<122>[E-22]
<123>[E-23]
<124>[E-24]
<125>[E-25]
<126>[F-1]
<127>[F-2]
<128>[F-3]
<129>[F-4]
<130>[F-5]
<131>[F-6]
<132>[F-7]
<133>[F-8]
<134>[F-9]
<135>[F-10]
<136>[F-11]
<137>[F-12]
<138>[F-13]
<139>[F-14]
<140>[F-15]
<141>[F-16]
<142>[F-17]
<143>[F-18]
<144>[F-19]
<145>[F-20]
<146>[F-21]
<147>[F-22]
<148>[F-23]
<149>[F-24]
<150>[F-25]
<151>[G-1]
<152>[G-2]
<153>[G-3]
<154>[G-4]
<155>[G-5]
<156>[G-6]
<157>[G-7]
<158>[G-8]
<159>[G-9]
<160>[G-10]
<161>[G-11]
<162>[G-12]
<163>[G-13]
<164>[G-14]
<165>[G-15]
<166>[G-16]
<167>[G-17]
<168>[G-18]
<169>[G-19]
<170>[G-20]
<171>[G-21]
<172>[G-22]
<173>[G-23]
<174>[G-24]
<175>[G-25]
<176>[H-1]
<177>[H-2]
<178>[H-3]
<179>[H-4]
<180>[H-5]
<181>[H-6]
<182>[H-7]
<183>[H-8]
<184>[H-9]
<185>[H-10]
<186>[H-11]
<187>[H-12]
<188>[H-13]
<189>[H-14]
<190>[H-15]
<191>[H-16]
<192>[H-17]
<193>[H-18]
<194>[H-19]
<195>[H-20]
<196>[H-21]
<197>[H-22]
<198>[H-23]
<199>[H-24]
<200>[H-25]
<201>[I-1]
<202>[I-2]
<203>[I-3]
<204>[I-4]
<205>[I-5]
<206>[I-6]
<207>[I-7]
<208>[I-8]
<209>[I-9]
<210>[I-10]
<211>[I-11]
<212>[I-12]
<213>[I-13]
<214>[I-14]
<215>[I-15]
<216>[I-16]
<217>[I-17]
<218>[I-18]
<219>[I-19]
<220>[I-20]
<221>[I-21]
<222>[I-22]
<223>[I-23]
<224>[I-24]
<225>[I-25]
**ENDTAB1A


//      This is the default TABLET2 menu.  It has been
//      updated for Release 13 functionality.  Where allowed,
//      commands are invoked transparently.

***TABLET2
**TABLET2STD
<6,17,28,39,50,61,72,83,94>;
<1>^C^C_ddvpoint
<2>'_ddview
<3>^C^C_dview
<4>^C^C_ucs _w
<5>^C^C_dducs
<12>^C^C_vpoint;;
<13>^C^C_plan;;
<14>^C^C_dview;;_off _x
<15>^C^C_ucs _p
<16>^C^C_dducsp
<23>^C^C_render
<24>^C^C_scene
<25>'_layer
<26,27>'_ddlmodes
<34>^C^C_matlib
<35>^C^C_light
<36>'_layer _on
<37>'_layer _t
<38>_vplayer _t
<45>^C^C_hide
<46>^C^C^P(setq ai_se (getvar "SHADEDGE"));_SHADEDGE;2;_SHADE;+
(setvar "SHADEDGE" ai_se)(setq ai_se nil)(princ) ^P
<47>'_layer _off
<48>'_layer _f
<49>_vplayer _f
<56>^C^C_rpref
<57>^C^C_shade
<58>'_layer _lo
<59>'_layer _u
<60>^C^C_vplayer
<67>^C^C_massprop
<68>'_cal
<69>^C^C_mview _off
<70>^C^C_mview _on
<71>^C^C_mview
<78>'_id
<79>^C^C_list
<80>^C^C_mview _4
<81>^C^C_mview _3
<82>^C^C_mview _2
<89>^C^C_area
<90>'_dist
<91>{T}
<92>^C^C_mview _r
<93>^C^C_vports
<7>^C^C_cone
<8>^C^C_region
<9>^C^C_mline
<10>^C^C_line
<18>^C^C_sphere
<19>^C^C_extrude
<20>^C^C_spline
<21>^C^C_pline
<29>^C^C_cylinder
<30>^C^C_revolve
<31>^C^C_ray
<32>^C^C_xline
<40>^C^C_box
<41>^C^C_rulesurf
<42>^C^C_arc
<43>^C^C_circle
<51>^C^C_wedge
<52>^C^C_revsurf
<53>^C^C_polygon
<54>^C^C_ellipse
<62>^C^C_torus
<63>^C^C_edgesurf
<64>^C^C_donut
<65>*^C^C_point
<73>{S}DR
<74>^C^C_tabsurf
<75>^C^C_3dface
<76>^C^C_3dpoly
<84>'_zoom _d
<85>^C^C_zoom _a
<86>'_zoom 2x
<87>'_pan
<95>'_zoom _p
<96>^C^C_zoom _e
<97>'_zoom .5x
<98>'_zoom
<11>^C^C_regen
<22>^C^C_regenall
<33,44,55,66,77>'_redraw
<88,99>'_redrawall
**ENDTAB2

//      This is the alternate TABLET2 menu.  All selections issue
//      Cancels (^C^C) prior to the command.

**TABLET2ALT
<6,17,28,39,50,61,72,83,94>;
<1>^C^C_ddvpoint
<2>^C^C_ddview
<3>^C^C_dview
<4>^C^C_ucs _w
<5>^C^C_dducs
<12>^C^C_vpoint;;
<13>^C^C_plan;;
<14>^C^C_dview;;_off _x
<15>^C^C_ucs _p
<16>^C^C_dducsp
<23>^C^C_render
<24>^C^C_scene
<25>^C^C_layer
<26,27>^C^C_ddlmodes
<34>^C^C_matlib
<35>^C^C_light
<36>^C^C_layer _on
<37>^C^C_layer _t
<38>^C^C_vplayer _t
<45>^C^C_hide
<46>^C^C^P(setq ai_se (getvar "SHADEDGE"));_SHADEDGE;2;_SHADE;+
(setvar "SHADEDGE" ai_se)(setq ai_se nil)(princ) ^P
<47>^C^C_layer _off
<48>^C^C_layer _f
<49>^C^C_vplayer _f
<56>^C^C_rpref
<57>^C^C_shade
<58>^C^C_layer _lo
<59>^C^C_layer _u
<60>^C^C_vplayer
<67>^C^C_massprop
<68>^C^C_cal
<69>^C^C_mview _off
<70>^C^C_mview _on
<71>^C^C_mview
<78>^C^C_id
<79>^C^C_list
<80>^C^C_mview _4
<81>^C^C_mview _3
<82>^C^C_mview _2
<89>^C^C_area
<90>^C^C_dist
<91>{T}
<92>^C^C_mview _r
<93>^C^C_vports
<7>^C^C_cone
<8>^C^C_region
<9>^C^C_mline
<10>^C^C_line
<18>^C^C_sphere
<19>^C^C_extrude
<20>^C^C_spline
<21>^C^C_pline
<29>^C^C_cylinder
<30>^C^C_revolve
<31>^C^C_ray
<32>^C^C_xline
<40>^C^C_box
<41>^C^C_rulesurf
<42>^C^C_arc
<43>^C^C_circle
<51>^C^C_wedge
<52>^C^C_revsurf
<53>^C^C_polygon
<54>^C^C_ellipse
<62>^C^C_torus
<63>^C^C_edgesurf
<64>^C^C_donut
<65>*^C^C_point
<73>{S}DR
<74>^C^C_tabsurf
<75>^C^C_3dface
<76>^C^C_3dpoly
<84>^C^C_zoom _d
<85>^C^C_zoom _a
<86>^C^C_zoom 2x
<87>^C^C_pan
<95>^C^C_zoom _p
<96>^C^C_zoom _e
<97>^C^C_zoom .5x
<98>^C^C_zoom
<11>^C^C_regen
<22>^C^C_regenall
<33,44,55,66,77>^C^C_redraw
<88,99>^C^C_redrawall
**ENDTAB2A

//      This is the default TABLET3 menu.  It has been
//      updated for Release 13 functionality.  It provides
//      Imperial unit input.

***TABLET3
**TABLET3STD
<1,2,3,10,11,12,19,20,21,28,29,30,37,38,39,46>;
<47,48,55,56,57,64,65,66,73,74,75,82,83,84>;
<91,92,93,100,101,102,109,110,111>;
<4,5><<135
<6,7><<90
<8,9><<45
<13,14><<180
<15,16><\
<17,18><<0
<22,23><<225
<24,25><<270
<26,27><<315
<31,32,33,34,35,36>^H
<44,45>/32\
<40,41>7/8\
<42,43>/16\
<49,50>1/2\
<51,52>5/8\
<53,54>3/4\
<58,59>1/8\
<60,61>1/4\
<62,63>3/8\
<67,68>-\
<69,70>/\
<71,72>X\
<76,77>@\
<78,79>'\
<80,81>"\
<85,86>7\
<87,88>8\
<89,90>9\
<94,95>4\
<96,97>5\
<98,99>6\
<103,104>1\
<105,106>2\
<107,108>3\
<112,113>0\
<114,115>.\
<116,117>,\
**ENDTAB3

//      This is the alternate TABLET3 menu.  It provides
//      Metric unit input.

**TABLET3ALT
<1,2,3,10,11,12,19,20,21,28,29,30,37,38,39,46>;
<47,48,55,56,57,64,65,66,73,74,75,82,83,84>;
<91,92,93,100,101,102,109,110,111>;
<4,5><<135
<6,7><<90
<8,9><<45
<13,14><<180
<15,16><\
<17,18><<0
<22,23><<225
<24,25><<270
<26,27><<315
<31,32,33,34,35,36>^H
<44,45>mm\
<40,41>m\
<42,43>cm\
<49,50>.\
<51,52>+\
<53,54>%%p\
<58,59>,\
<60,61>%%d\
<62,63>%%c\
<67,68>-\
<69,70>/\
<71,72>X\
<76,77>@\
<78,79>'\
<80,81>"\
<85,86>7\
<87,88>8\
<89,90>9\
<94,95>4\
<96,97>5\
<98,99>6\
<103,104>1\
<105,106>2\
<107,108>3\
<112,113>0\
<114,115>00\
<116,117>000\
**ENDTAB3A


//      This is the default TABLET4 menu.  It has been
//      updated for Release 13 functionality.
//
//      Menu items S19 - S22 contain the calls to swap the tablet menus.
//
//      These items cause tablet menus to be swapped which contain
//      various "expert" menu selections.  A variable is used to
//      hold bit-coded values which are on when the menu is swapped,
//      i.e., when the alternate menu has been swapped in.  Bit 1
//      is on when menu area 1 is swapped, bit 2 when menu area 2
//      is swapped, and so on with bits 4 and 8.  Prompts describing
//      the changes enacted via the menu provide feedback to the user.
//
//      The prompts are tied to the setting of the EXPERT system
//      variable.  If the value of the EXPERT system variable is 0,
//      then a prompt such as this will be issued;
//      "Menu area 3 has been swapped.  Optional metric
//      functionality is now active."  If the value of the EXPERT
//      system variable is 1-4, the prompt will be shortened to;
//      "Menu area 3 has been swapped.", and if the value of
//      the EXPERT system variable is greater than 4, all prompts
//      will be suppressed.
//
//      Selecting the AutoCAD heading at the top of the screen
//      menu resets all of the menus to their default values, as
//      does opening a (new) drawing.
//

***TABLET4
**TABLET4STD
<1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,23,24,25>;
<31,36,48,56,61,73,81,86,98>;
<106,111,123,131,136,148,156,161,173>;
<19>[Tablero1]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab1) ^P
<20>[Tablero2]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab2) ^P
<21>[Tablero3]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab3) ^P
<22>[Tablero4]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab4) ^P
<26>^C^C_dtext _a
<27>^C^C_dtext _m
<28>^C^C_dtext _f
<29>^C^C_spell
<30>^C^C_mtext
<51>^C^C_dtext _bl
<52>^C^C_dtext _c
<53>^C^C_dtext _r
<54>'_style
<55>^C^C_ddedit
<76>^C^C_tolerance
<77>^C^C_dimstyle _r
<78>^C^C_dimstyle _s
<79,80>^C^C_ddim
<101>^C^C_dimcenter
<102>^C^C_dimedit _o
<103>^C^C_dimtedit \_a
<104>^C^C_dimtedit
<105>^C^C_dimtedit \_h
<126>^C^C_leader
<127>^C^C_dimbaseline
<128>^C^C_dimcontinue
<129,130>^C^C_dimlinear
<151>^C^C_dimradius
<152>^C^C_dimdiameter
<153>^C^C_dimangular
<154>^C^C_dimordinate
<155>^C^C_dimaligned
<32,33>'_?
<34,35>^C^C^C
<57,58>_u
<59,60>^C^C_redo
<82,83>^C^C_erase
<84,85>^C^C_ddmodify
<107>^C^C_ddattdef
<108>^C^C_wblock
<109>^C^C_block
<110>^C^C_ddinsert
<132>^C^C_ddatte
<133>^C^C_xref _o
<134>^C^C_xref _a
<135>^C^C_xref
<157>^C^C_ddunits
<158>'_ddltype
<159>'_ddemodes
<160>^C^C_ddrmodes
<37>_none
<38>_center
<39>_endpoint
<40>_ins
<41>_int
<42>_midpoint
<43>_nearest
<44>_node
<45>_perpend
<46>_quadrant
<47>_tangent
<62>_appint
<63>_from
<64>_fence
<65>_cp
<66>_wp
<67>_window
<68>_last
<69>_previous
<70>_crossing
<71>_remove
<72>_add
<87>^C^C_group
<88>^C^C_pspace
<89>^C^C_mspace
<90>^O
<91>^D
<92>^Q
<93>'_graphscr
<94>^E
<95>^G
<96>^B
<97>^V
<112>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
<113>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
<114>^C^C_offset
<115>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
<116>^C^C_bhatch
<117>^C^C_hatchedit
<118>^C^C_splinedit
<119>^C^C_pedit
<120>^C^C_xplode
<121>^C^C_array
<122>^C^C_divide
<137>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
<138>^C^C_break \_f \@
<139>^C^C_break \_f
<140>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
<141>^C^C_extend
<142>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_stretch,^C^C_stretch)
<143>^C^C_trim
<144>^C^C_fillet _r 0;;
<145>^C^C_fillet
<146>^C^C_chamfer
<147>^C^C_measure
<162>^C^C_intersect
<163>^C^C_union
<164>^C^C_subtract
<165>^C^C_interfere
<166>^C^C_section
<167>^C^C_slice
<168>^C^C_lengthen
<169>^C^C_align
<170>^C^C_rotate3d
<171>^C^C_mirror3d
<172>^C^C^P(ai_onoff "QTEXTMODE") ^P
<49>^C^C_qsave
<50>^C^C_saveas
<74>^C^C_new
<75>^C^C_open
<99>^C^C_files
<100>^C^C_appload
<124>^C^C_plot
<125>^C^C_psout
<149>^C^C_quit
<150>^C^C^P(if R13omn (progn(command "_Menu" R13omn)(setq R13omn nil));+
(if (setq R13omn (getvar "menuname"));+
(if (setq envname (getenv "ACADALTMENU")) (command "_Menu" +
(findfile envname)) (command "_Menu" R13omn))))(setq T_MENU nil)(princ) ^P
<174,175>^C^C_shell
**ENDTAB4

//      This is an alternate TABLET4 menu which contains the following
//      changes to the base functionality contained in the original
//      menu:
//
//      1)  All commands repeat which make sense to repeat
//      2)  The Osnap override picks now change the running "osmode"
//          transparently via '_OSMODE.
//      3)  The DTEXT command is replaced with the TEXT command.
//      4)  The ARRAY command is replaced with the 3DARRAY command.
//
//      Menu items S19 - S22 contain the calls to swap the tablet menus.
//
//      These items cause tablet menus to be swapped which contain
//      various "expert" menu selections.  A variable is used to
//      hold bit-coded values which are on when the menu is swapped,
//      i.e., when the alternate menu has been swapped in.  Bit 1
//      is on when menu area 1 is swapped, bit 2 when menu area 2
//      is swapped, and so on with bits 4 and 8.  Prompts describing
//      the changes enacted via the menu provide feedback to the user.
//
//      The prompts are tied to the setting of the EXPERT system
//      variable.  If the value of the EXPERT system variable is 0,
//      then a prompt such as this will be issued;
//      "Menu area 3 has been swapped.  Optional metric
//      functionality is now active."  If the value of the EXPERT
//      system variable is 1-4, the prompt will be shortened to;
//      "Menu area 3 has been swapped.", and if the value of
//      the EXPERT system variable is greater than 4, all prompts
//      will be suppressed.
//
//      Selecting the AutoCAD heading at the top of the screen
//      menu resets all of the menus to their default values, as
//      does opening a (new) drawing.

**TABLET4ALT
<1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,23,24,25>;
<31,36,48,56,61,73,81,86,98>;
<106,111,123,131,136,148,156,161,173>;
<19>[Tablero1]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab1) ^P
<20>[Tablero2]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab2) ^P
<21>[Tablero3]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab3) ^P
<22>[Tablero4]^P$M=$(if,$(or,$(eq,$(getvar,CMDNAMES),TEXT),+
$(eq,$(getvar,CMDNAMES),DTEXT),$(eq,$(getvar,CMDNAMES),ATTDEF),+
$(eq,$(getvar,CMDNAMES),MTEXT)),^C^C,^Z)(ai_tab4) ^P
<26>*^C^C_text _a
<27>*^C^C_text _m
<28>*^C^C_text _f
<29>^C^C_spell
<30>*^C^C_mtext
<51>*^C^C_text _bl
<52>*^C^C_text _c
<53>*^C^C_text _r
<54>'_style
<55>^C^C_ddedit
<76>*^C^C_tolerance
<77>^C^C_dimstyle _r
<78>^C^C_dimstyle _s
<79,80>^C^C_ddim
<101>*^C^C_dimcenter
<102>*^C^C_dimedit _o
<103>*^C^C_dimtedit \_a
<104>*^C^C_dimtedit
<105>*^C^C_dimtedit \_h
<126>*^C^C_leader
<127>*^C^C_dimbaseline
<128>*^C^C_dimcontinue
<129,130>*^C^C_dimlinear
<151>*^C^C_dimradius
<152>*^C^C_dimdiameter
<153>*^C^C_dimangular
<154>*^C^C_dimordinate
<155>*^C^C_dimaligned
<32,33>'_?
<34,35>^C^C^C
<57,58>_u
<59,60>^C^C_redo
<82,83>*^C^C_erase
<84,85>^C^C_ddmodify
<107>^C^C_ddattdef
<108>^C^C_wblock
<109>^C^C_block
<110>^C^C_ddinsert
<132>^C^C_ddatte
<133>^C^C_xref _o
<134>^C^C_xref _a
<135>^C^C_xref
<157>^C^C_ddunits
<158>^C^C_ddltype
<159>^C^C_ddemodes
<160>^C^C_ddrmodes
<37>'_osmode 0
<38>'_osmode 4
<39>'_osmode 1
<40>'_osmode 64
<41>'_osmode 32
<42>'_osmode 2
<43>'_osmode 512
<44>'_osmode 8
<45>'_osmode 128
<46>'_osmode 16
<47>'_osmode 256
<62>'_osmode 2048
<63>_from
<64>_fence
<65>_cp
<66>_wp
<67>_window
<68>_last
<69>_previous
<70>_crossing
<71>_remove
<72>_add
<87>^C^C_group
<88>^C^C_pspace
<89>^C^C_mspace
<90>^O
<91>^D
<92>^Q
<93>'_graphscr
<94>^E
<95>^G
<96>^B
<97>^V
<112>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_scale,*^C^C_scale)
<113>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_rotate,*^C^C_rotate)
<114>*^C^C_offset
<115>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_move,*^C^C_move)
<116>*^C^C_bhatch
<117>*^C^C_hatchedit
<118>*^C^C_splinedit
<119>*^C^C_pedit
<120>*^C^C_explode
<121>*^C^C_3darray
<122>*^C^C_divide
<137>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_mirror,*^C^C_mirror)
<138>^C^C_break \_f \@
<139>^C^C_break \_f
<140>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_copy,*^C^C_copy)
<141>*^C^C_extend
<142>$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_stretch,*^C^C_stretch)
<143>*^C^C_trim
<144>*^C^C_fillet _r 0;;
<145>*^C^C_fillet
<146>*^C^C_chamfer
<147>*^C^C_measure
<162>*^C^C_intersect
<163>*^C^C_union
<164>*^C^C_subtract
<165>*^C^C_interfere
<166>*^C^C_section
<167>*^C^C_slice
<168>*^C^C_lengthen
<169>*^C^C_align
<170>*^C^C_rotate3d
<171>*^C^C_mirror3d
<172>^C^C^P(ai_onoff "QTEXTMODE") ^P
<49>^C^C_qsave
<50>^C^C_saveas
<74>^C^C_new
<75>^C^C_open
<99>^C^C_files
<100>^C^C_appload
<124>^C^C_plot
<125>^C^C_psout
<149>^C^C_quit
<150>^C^C^P(if R13omn (progn(command "_Menu" R13omn)(setq R13omn nil));+
(if (setq R13omn (getvar "menuname"));+
(if (setq envname (getenv "ACADALTMENU")) (command "_Menu" +
(findfile envname)) (command "_Menu" R13omn))))(setq T_MENU nil)(princ) ^P
<174,175>^C^C_shell
**ENDTAB4A



***HELPSTRINGS
ID_New       [Crea un nuevo archivo de dibujo]
ID_Open      [Abre un archivo de dibujo ya existente]
ID_Close     [Cierra el archivo de dibujo]
ID_Save      [Guarda el dibujo con el nombre de archivo actual o con otro nombre]
ID_Saveas    [Guarda un dibujo sin nombre con un nombre de archivo o renombra el dibujo actual]
ID_Print     [Imprime un dibujo en un trazador, impresora o archivo]
ID_Import    [Importa un archivo dentro del dibujo]
ID_Export    [Exporta un dibujo a un formato de archivo diferente]
ID_Ioopts    [Controla las opciones para la importaci≤n y exportaci≤n]
ID_Wmfopt    [Establece opciones para CARGAWMF]
ID_Psqual    [Controla la calidad de modelizado de las imßgenes PostScript]
ID_Psdisp    [Controla el aspecto de una imagen PostScript usando CARGAPS]
ID_Psprol    [Da nombre a la secci≤n pr≤logo leφda en acad.psf cuando se usa SALVAPS]
ID_Mngt      [Muestra las funciones de gesti≤n]
ID_Unlock    [Desbloquea archivos de dibujo bloqueados]
ID_Audit     [Examina la integridad de un dibujo]
ID_Recov     [Repara un dibujo da±ado]
ID_Exit      [Sale de autoCAD]
ID_Undo      [Deshace la operaci≤n mßs reciente]
ID_Redo      [Deshace el comando DESHACER o H]
ID_Cut       [Borra objetos y los guarda en el Portapapeles]
ID_Copy      [Copia objetos en el Portapapeles]
ID_Copylnk   [Copia la vista actual en el Portapapeles]
ID_Paste     [Inserta datos del Portapapeles]
ID_Pastesp   [Inserta datos del Portapapeles y controla su formato]
ID_Ddmodi    [Control de las propiedades de objeto]
ID_Links     [Administra vφnculos OLE]
ID_Insobj    [Inserta un objeto vinculado o incrustado]
ID_TbRedraw  [Renueva la visualizaci≤n de la ventana grßfica actual]
ID_Redraw    [Renueva la visualizaci≤n de la ventana grßfica actual]
ID_Redall    [Renueva la visualizaci≤n de todas las ventanas grßficas]
ID_TbZoom    [Aumenta o disminuye el tama±o aparente de los objetos en la ventana actual]
ID_Zooin     [Aumenta el tama±o aparente de los objetos en la ventana actual]
ID_Zooout    [Disminuye el tama±o aparente de los objetos en la ventana actual]
ID_Zoowin    [El zoom se ajusta al ßrea de una ventana rectangular]
ID_Zooall    [El zoom visualiza el dibujo completo en la ventana grßfica actual]
ID_Zoopre    [El zoom muestra la vista previa]
ID_Zoosca    [El zoom se ajusta seg·n un factor de escala especificado]
ID_Zoodyn    [El zoom se ajusta a la parte generada del dibujo]
ID_Zoocen    [Visualiza una ventana especificada por un punto central y una altura]
ID_Zoolef    [Visualiza una ventana definida por la esquina inferior izquierda y la altura]
ID_Zoolim    [El zoom visualiza los objetos incluidos en los lφmites del dibujo]
ID_Zooext    [El zoom visualiza la extensi≤n del dibujo]
ID_Zoovma    [El zoom visualiza lo mßximo posible en la ventana grßfica actual]
ID_TbPan     [Desplaza la vista del dibujo en la ventana grßfica actual]
ID_TbPan     [Desplaza la vista del dibujo en la ventana grßfica actual]
ID_Panpic    [Desplaza la vista del dibujo a una distancia determinada]
ID_Panlef    [Desplaza la vista del dibujo hacia la izquierda]
ID_Panrig    [Desplaza la vista del dibujo hacia la derecha]
ID_Panup     [Desplaza la vista del dibujo hacia arriba]
ID_Pandow    [Desplaza la vista del dibujo hacia abajo]
ID_Panupl    [Desplaza la vista del dibujo hacia la parte superior izquierda]
ID_Panupr    [Desplaza la vista del dibujo hacia la parte superior derecha]
ID_Pandol    [Desplaza la vista del dibujo hacia la parte inferior izquierda]
ID_Pandor    [Desplaza la vista del dibujo hacia la parte inferior derecha]
ID_Namview   [Crea y restituye vistas con nombre]
ID_3DViewp   [Visualiza las opciones predefinidas de puntos de vista 3D]
ID_Plan      [Visualiza la vista en planta del Sistema de Coordenadas Personales]
ID_Planw     [Visualiza la vista en planta del Sistema de Coordenadas Universales]
ID_Planu     [Visualiza la vista en planta de un SCP previamente guardado]
ID_Vietop    [Establece el punto de vista desde arriba]
ID_Viebot    [Establece el punto de vista desde abajo]
ID_Vielef    [Establece el punto de vista desde la izquierda]
ID_Vierig    [Establece el punto de vista desde la derecha]
ID_Viefro    [Establece el punto de vista desde el frente]
ID_Viebac    [Establece el punto de vista desde atrßs]
ID_Vieswi    [Establece el punto de vista isomΘtrico suroeste]
ID_Viesei    [Establece el punto de vista isomΘtrico sureste]
ID_Vienei    [Establece el punto de vista isomΘtrico nordeste]
ID_Vienwi    [Establece el punto de vista isomΘtrico noroeste]
ID_3DVpt     [Activa la direcci≤n para una visualizaci≤n 3D del dibujo]
ID_3DVptr    [Determina un punto de vista]
ID_3DVptt    [Visualiza un compßs y un trφpode para definir la direcci≤n de la vista]
ID_3DVptv    [Determina una direcci≤n (desde un punto) hacia el origen (0,0,0)]
ID_3DDv      [Define proyecciones paralelas o vistas en perspectiva]
ID_Vietms    [Conmuta a Espacio modelo en mosaico]
ID_Viefms    [Conmuta a Espacio modelo flotante]
ID_Vieps     [Conmuta a Espacio papel]
ID_TVp       [Proporciona opciones de ventanas en mosaico]
ID_TVpl      [Visualiza opciones de disposici≤n para ventanas en mosaico]
ID_TVp1      [Visualiza de nuevo una ·nica ventana grßfica]
ID_TVp2      [Divide la ventana grßfica actual en dos]
ID_TVp3      [Divide la ventana grßfica actual en tres]
ID_TVp4      [Divide la ventana actual en cuatro ventanas de igual tama±o]
ID_TVpr      [Restituye una configuraci≤n de ventanas previamente guardada]
ID_TVpd      [Borra una configuraci≤n de ventanas existente]
ID_TVpj      [Une dos ventanas adyacentes en una mayor]
ID_TVps      [Guarda la ventana actual utilizando un nombre especφfico]
ID_FVp       [Proporciona opciones de ventanas flotantes]
ID_FVp1      [Crea una ventana que ocupa el ßrea disponible en pantalla]
ID_FVp2      [Divide el ßrea especificada en dos ventanas]
ID_FVp3      [Divide el ßrea especificada en tres ventanas]
ID_FVp4      [Divide el ßrea especificada en cuatro ventanas]
ID_FVpr      [Restituye una configuraci≤n de ventanas a una ventana grßfica en Espacio papel]
ID_FVpon     [Activa una ventana]
ID_FVpoff    [Desactiva una ventana]
ID_FVph      [Suprime las lφneas ocultas en una ventana durante el trazado desde Espacio papel]
ID_FVsetup   [Define las especificaciones de un dibujo]
ID_Ucsp      [Selecciona un Sistema de Coordenadas Personales preestablecido]
ID_Dducs     [Administra el Sistema de Coordenadas Personales]
ID_Ucsset    [Proporciona opciones del Sistema de Coordenadas Personales]
ID_Ucsw      [Define el SCP como el Sistema de Coordenadas Universales]
ID_Ucsori    [Define un nuevo SCP por cambio de origen]
ID_Ucszav    [Define un SCP utilizando el eje Z positivo para la extrusi≤n]
ID_Ucs3pt    [Especifica el nuevo origen del SCP y la direcci≤n de los ejes X e Y]
ID_Ucsobj    [Define un nuevo sistema de coordenadas basado en un objeto seleccionado]
ID_Ucsvie    [Establece un nuevo sistema de coordenas con el plano XY paralelo a la pantalla]
ID_Ucsxar    [Gira el SCP actual alrededor del eje X]
ID_Ucsyar    [Gira el SCP actual alrededor del eje Y]
ID_Ucszar    [Gira el SCP actual alrededor del eje Z]
ID_Ucspre    [Restituye el SCP previo]
ID_Ucsres    [Restituye un SCP, guardado previamente, que pasa a ser el SCP actual]
ID_Ucssav    [Guarda el SCP actual con un nombre especificado]
ID_Ucsdel    [Borra el SCP especificado de la lista de sistemas de coordenadas guardados]
ID_Ucslis    [Muestra los nombres de SCP definidos]
ID_Objcre    [Establece propiedades para nuevos objetos]
ID_Layers    [Gestiona capas]
ID_Vlc       [Inutiliza capas en las ventanas especificadas]
ID_Vlcf      [Inutiliza una capa o grupo de capas en una o mßs ventanas]
ID_Vlct      [Reutiliza capas en las ventanas especificadas]
ID_Vlcr      [Establece la visibilidad por defecto de las capas en las ventanas especificadas]
ID_Vlcn      [Crea nuevas capas inutilizadas en todas las ventanas]
ID_Vlcd      [Establece la visibilidad por defecto de capas para las nuevas ventanas grßficas]
ID_Vlcl      [Visualiza los nombres de las capas inutilizadas en una ventana]
ID_Color     [Establece el color para los nuevos objetos a dibujar]
ID_Linety    [Carga y establece tipos de lφnea]
ID_Mstyle    [Gestiona estilos de lφnea m·ltiple]
ID_TexSty    [Crea estilos de texto con nombre]
ID_DimSty    [Crea y modifica estilos de acotaci≤n]
ID_Shape     [Inserta una forma]
ID_Units     [Controla formato de coordenadas y ßngulo de visualizaci≤n y determina precisi≤n]
ID_Limits    [Establece y controla los lφmites del dibujo]
ID_Time      [Visualiza la fecha y hora de un dibujo]
ID_Status    [Visualiza las estadφsticas, modos y extensiones del dibujo]
ID_Rename    [Cambia los nombres de objetos]
ID_Purge     [Borra objetos no utilizados de la base de datos del dibujo]
ID_Purla     [Borra capas no utilizadas de la base de datos del dibujo]
ID_Purlt     [Borra tipos de lφnea no utilizados de la base de datos del dibujo]
ID_Purmls    [Borra estilos de lφnea m·ltiple no utilizados de la base de datos del dibujo]
ID_Purts     [Borra estilos de texto no utilizados de la base de datos del dibujo]
ID_Purds     [Borra estilos de acotaci≤n no utilizados de la base de datos del dibujo]
ID_Purs      [Borra formas no utilizadas de la base de datos del dibujo]
ID_Purblk    [Borra bloques no utilizados de la base de datos del dibujo]
ID_Purall    [Borra todos los objetos no utilizados de la base de datos del dibujo]
ID_Dwgaids   [Establece las ayudas al dibujo]
ID_Osndd     [Define los modos de Referencia a objetos y cambia el tama±o de la mira]
ID_Cordis    [Cambia el modo de coordenadas]
ID_Ddselec   [Establece parßmetros de modo de designaci≤n de objetos]
ID_Ddgrips   [Activa los pinzamientos y establece sus colores]
ID_Rpref     [Establece las preferencias para el modelizado]
ID_Ucs       [Guarda, restituye, cambia de nombre, borra y lista los SCP]
ID_Ucsi      [Controla la visibilidad y emplazamiento del icono del SCP en las ventanas]
ID_Ucsor     [Fuerza el icono a aparecer en el origen del sistema de coordenadas]
ID_Ucsf      [Genera una vista en planta cuando el SCP cambia]
ID_Disopt    [Muestra las opciones de pantalla]
ID_Dosolf    [Especifica si los s≤lidos estßn rellenos]
ID_Dosplfr   [Controla la visualizaci≤n de los ajustes de curvaB en polilφneas]
ID_Doattds   [Controla la visibilidad global de los atributos]
ID_Doattdn   [Mantiene la visibilidad actual de cada atributo]
ID_Doattdo   [Hace que todos los atributos sean visibles]
ID_Doattdf   [Hace que todos los atributos sean invisibles]
ID_Doddpt    [Especifica el modo de visualizaci≤n y el tama±o de los objetos de punto]
ID_Doft      [Especifica que True Type y PostScript Type 1 aparecerßn como texto relleno]
ID_Doot      [Especifica que True Type y PostScript Type 1 aparecerßn como texto sin rellenar]
ID_Dotf      [Controla si aparecen marcos de texto en lugar del texto]
ID_Dotq      [Establece la resoluci≤n de los tipos de letra True Type y PostScript Type 1]
ID_Lintyps   [Muestra las opciones de tipos de lφnea y de sus escalas]
ID_Ltsgls    [Establece el factor de escala global de tipos de lφnea]
ID_Ltpss     [Establece las escalas de tipo de lφnea para el Espacio papel]
ID_Ltgen     [Establece que un tipo de lφnea se genere uniformemente en toda la polilφnea]
ID_Prefs     [Personaliza los parßmetros de AutoCAD]
ID_Config    [Reconfigura AutoCAD]
ID_Rconfi    [Reconfigura la definici≤n de modelizado]
ID_Tablet    [Lista las opciones de tablero]
ID_Tabon     [Activa el modo Tablero]
ID_Taboff    [Desactiva el modo Tablero]
ID_Tabcal    [Calibra el digitalizador con el sistema de coordenadas del dibujo]
ID_Tabcfg    [Designa o realφnea las ßreas de men· de tablero]
ID_Savtim    [Establece el intervalo de guardado automßtico]
ID_Sysvar    [Muestra las variables de sistema y establece sus valores]
ID_Sysvarl   [Muestra las variables de sistema y sus valores]
ID_Sysvars   [Establece los valores de las variables de sistema]
ID_Appld     [Carga aplicaciones AutoLISP, ADS y ARX]
ID_Script    [Ejecuta una secuencia de comandos de un archivo de gui≤n]
ID_Tpal      [Abre y cierra las barras de herramientas]
ID_TbDraw    [Muestra la barra de herramientas Dibujo]
ID_TbModify  [Muestra la barra de herramientas Modificar]
ID_TbDims    [Muestra la barra de herramientas Acotar]
ID_TbSolids  [Muestra la barra de herramientas S≤lidos]
ID_TbSurfac  [Muestra la barra de herramientas Superficies]
ID_TbXref    [Muestra la barra de herramientas RefX]
ID_TbRender  [Muestra la barra de herramientas Render]
ID_TbExtdb   [Muestra la barra de herramientas Base de datos externa]
ID_TbObjpro  [Muestra la barra de herramientas Propiedades de objetos]
ID_TbAttrib  [Muestra la barra de herramientas Atributos]
ID_TbMisc    [Visualiza la barra de herramientas Varios]
ID_TbSelect  [Visualiza la barra de herramientas Seleccionar objetos]
ID_Group     [Crea un conjunto de selecci≤n con nombre a partir de objetos]
ID_TbOsnap   [Visualiza la barra de herramientas Referencia a objetos]
ID_TbPoiFil  [Visualiza la barra de herramientas Filtros para puntos]
ID_TbUcs     [Visualiza la barra de herramientas SCP]
ID_TbView    [Visualiza la barra de herramientas Vista]
ID_Stdtbar   [Muestra la barra de herramientas Estßndar]
ID_TbClall   [Cierra todas las barras de herramientas]
ID_Aerial    [Abre la ventana Vista aΘrea]
ID_TxtWin    [Abre la ventana de texto de AutoCAD]
ID_Slides    [Crea o muestra archivos de fotos]
ID_Sldvie    [Visualiza un archivo de foto en la ventana grßfica actual]
ID_Sldsav    [Crea un archivo de foto de la ventana grßfica actual]
ID_Images    [Crea o guarda archivos GIF, TGA y TIFF]
ID_Imgvie    [Visualiza imßgenes GIF, TGA o TIFF]
ID_Imgsav    [Guarda una imagen modelizada en un archivo GIF, TGA o TIFF]
ID_Spell     [Comprueba la ortografφa de un texto]
ID_Cal       [Eval·a expresiones matemßticas y geomΘtricas]
ID_Cusmnu    [Personaliza men·s]
ID_Custb     [Personaliza barras de herramientas]
ID_Reinit    [Reinicializa las puertas de E/S, digitalizador, pantalla y archivo de parßmetros]
ID_Compile   [Compila archivos de forma y de tipos de letra PostScript]
ID_Help      [Visualiza la ayuda en lφnea]
ID_Helpcts   [Visualiza la tabla de contenidos para la ayuda en lφnea]
ID_Helpsrc   [Visualiza el cuadro de dißlogo Buscar]
ID_Helphow   [Describe c≤mo usar la ayuda en lφnea de Windows]
ID_Whatnew   [Describe las nuevas caracterφsticas de AutoCAD Versi≤n 13]
ID_Qtour     [Inicia Conceptos bßsicos]
ID_Lrnacad   [Inicia el tutorial en lφnea Aprendizaje de AutoCAD]
ID_About     [Visualiza informaci≤n sobre AutoCAD]
ID_Selwin    [Designa todos los objetos situados completamente dentro de una ventana definida]
ID_Selcro    [Designa los objetos incluidos en una ventana definida o que se intersecan con ella]
ID_Selgro    [Designa los objetos incluidos en un grupo determinado]
ID_Selpre    [Designa el conjunto de selecci≤n mßs reciente]
ID_Sellas    [Designa el ·ltimo objeto visible creado]
ID_Selall    [Designa todos los objetos situados en las capas reutilizadas]
ID_Selwp     [Designa los objetos incluidos en un polφgono definido]
ID_Selcp     [Designa objetos incluidos en un polφgono definido o que se intersecan con Θl]
ID_Selfen    [Designa todos los objetos que se cruzan con un polφgono de selecci≤n]
ID_Seladd    [Conmuta al modo A±adir]
ID_Selrem    [Conmuta al modo Eliminar]
ID_Filter    [Crea listas para designar objetos a partir de sus propiedades]
ID_Osnfro    [Fuerza el cursor a un punto de referencia temporal]
ID_Osnend    [Fuerza el cursor al punto final mßs cercano de un arco o una lφnea]
ID_Osnmid    [Fuerza el cursor al punto medio de un arco o una lφnea]
ID_Osnint    [Fuerza el cursor a la intersecci≤n de una lφnea, un arco o un cφrculo]
ID_Osnapp    [Fuerza el cursor a la intersecci≤n ficticia de dos objetos]
ID_Osncen    [Fuerza el cursor al centro de un arco o un cφrculo]
ID_Osnqua    [Fuerza el cursor a un punto del cuadrante de un arco o un cφrculo]
ID_Osnper    [Fuerza el cursor a un punto perpendicular a un arco, una lφnea o un cφrculo]
ID_Osntan    [Fuerza el cursor a la tangente de un arco o un cφrculo]
ID_Osnnod    [Fuerza el cursor a un objeto puntual]
ID_Osnins    [Fuerza el cursor al punto de inserci≤n de texto, bloque, forma o atributo]
ID_Osnnea    [Fuerza el cursor al punto mßs cercano de un arco, un cφrculo, una lφnea o un punto]
ID_Osnqui    [Fuerza el cursor al primer punto de referencia]
ID_Osnnon    [Desactiva el Modo de referencia a objetos]
ID_Ptfx      [Determina un punto con filtro .X]
ID_Ptfy      [Determina un punto con filtro .Y]
ID_Ptfz      [Determina un punto con filtro .Z]
ID_Ptfxy     [Determina un punto con filtro .XY]
ID_Ptfxz     [Determina un punto con filtro .XZ]
ID_Ptfyz     [Determina un punto con filtro .YZ]
ID_Dview     [Define proyecciones paralelas o vistas en perspectiva]
ID_LType     [Crea, carga y define tipos de lφnea]
ID_Mlstyle   [Define un estilo para diferentes lφneas paralelas]
ID_Dchpro    [Modifica el color, la capa, el tipo de lφnea y la altura de un objeto]
ID_List      [Visualiza informaci≤n de la base de datos sobre los objetos designados]
ID_Id        [Visualiza las coordenadas de un punto]
ID_Dist      [Mide la distancia y el ßngulo entre dos puntos]
ID_Area      [Calcula el ßrea y el perφmetro de objetos o de ßreas definidas]
ID_Masspr    [Calcula y visualiza las propiedades fφsicas de regiones o s≤lidos]
ID_Line      [Crea segmentos de lφnea recta]
ID_Xline     [Crea una lφnea infinita]
ID_Ray       [Crea una lφnea semiinfinita]
ID_Pline     [Crea polilφneas bidimensionales]
ID_Poly3d    [Crea una polilφnea con segmentos de lφnea recta]
ID_Mline     [Crea varias lφneas paralelas]
ID_Spline    [Crea una Spline cuadrßtica o c·bica (NURBS)]
ID_Arc3pt    [Crea un arco mediante tres puntos]
ID_Arcsce    [Crea un arco mediante el punto inicial, el centro y el punto final]
ID_Arcsca    [Crea un arco mediante el punto inicial, el centro y el ßngulo incluido]
ID_Arcscl    [Crea un arco mediante el punto inicial, el centro y la longitud de cuerda]
ID_Arcsea    [Crea un arco mediante el punto inicial, el punto final y el ßngulo incluido]
ID_Arcsed    [Crea un arco mediante el punto inicial, el punto final y la direcci≤n inicial]
ID_Arcser    [Crea un arco mediante el punto inicial, el punto final y el radio]
ID_Arccse    [Crea un arco mediante el centro, el punto inicial y el punto final]
ID_Arccsa    [Crea un arco mediante el centro, el punto inicial y el ßngulo incluido]
ID_Arccsl    [Crea un arco mediante el centro, el punto inicial y la longitud de cuerda]
ID_Arccon    [Crea un arco tangente al ·ltimo arco o lφnea dibujados]
ID_Cirrad    [Crea un cφrculo mediante un radio determinado]
ID_Cirdia    [Crea un cφrculo mediante un dißmetro determinado]
ID_Cir2pt    [Crea un cφrculo mediante dos puntos finales del dißmetro]
ID_Cir3pt    [Crea un cφrculo mediante tres puntos de la circunferencia]
ID_Cirttr    [Crea un cφrculo tangente a dos objetos con un radio determinado]
ID_Donut     [Dibuja cφrculos rellenos]
ID_Ellips    [Crea una elipse mediante un centro determinado]
ID_Ellcir    [Crea una elipse mediante un eje determinado]
ID_Ellarc    [Crea un arco elφptico]
ID_Rectan    [Dibuja una polilφnea rectangular]
ID_Polygo    [Crea una polilφnea equilßtera cerrada]
ID_Solid     [Crea polφgonos con relleno s≤lido]
ID_Region    [Crea una regi≤n desde un conjunto de selecci≤n de objetos existentes]
ID_Bpoly     [Crea una regi≤n o una polilφnea a partir de un contorno cerrado]
ID_Point     [Crea un punto]
ID_Divide    [Inserta puntos o bloques separßndolos uniformemente a lo largo de un objeto o de su perφmetro]
ID_Measure   [Inserta puntos o bloques en un objeto a intervalos determinados]
ID_Dinser    [Inserta un bloque u otro dibujo]
ID_Block     [Crea una definici≤n de bloque a partir de un conjunto de objetos]
ID_TbBlock   [Crea una definici≤n de bloque a partir de un conjunto de objetos]
ID_Bhatch    [Rellena un ßrea incluida con un patr≤n de sombreado asociativo]
ID_Psfill    [Rellena el contorno de una polilφnea bidimensional con un patr≤n PostScript]
ID_Mtext     [Crea pßrrafos de texto]
ID_Dtext     [Visualiza el texto a medida que se escribe]
ID_Text      [Crea una sola lφnea de texto]
ID_Move      [Desplaza los objetos a una determinada distancia y en una direcci≤n especφfica]
ID_Explode   [Divide un objeto compuesto en sus elementos]
ID_Erase     [Suprime objetos de un dibujo]
ID_Copyob    [Repite objetos]
ID_Offset    [Crea cφrculos concΘntricos y lφneas y curvas paralelas]
ID_Mirror    [Crea una imagen simΘtrica de los objetos]
ID_Mir3d     [Crea una imagen simΘtrica de los objetos en un plano]
ID_Arrrec    [Crea una matriz rectangular]
ID_Arrpol    [Crea una matriz polar]
ID_Arr3dr    [Crea una matriz rectangular 3D]
ID_Arr3dp    [Crea una matriz polar 3D]
ID_Rotate    [Desplaza los objetos alrededor de un punto base]
ID_Rot3d     [Desplaza los objetos alrededor de un eje tridimensional]
ID_Align     [Desplaza y gira los objetos para alinearlos con otros]
ID_Stretch   [Desplaza o estira los objetos]
ID_Scale     [Aumenta o reduce los objetos uniformemente en las direcciones X, Y y Z]
ID_Length    [Alarga un objeto]
ID_Change    [Cambia las propiedades de los objetos existentes]
ID_Trim      [Recorta los objetos mediante una arista cortante definida por otros objetos]
ID_Extend    [Alarga un objeto hasta alcanzar otro objeto]
ID_Bre1pt    [Parte el objeto designado en el punto de selecci≤n]
ID_Bre1ps    [Parte el objeto designado en un punto determinado]
ID_Bre2pt    [Parte el objeto designado entre el punto de selecci≤n y uno determinado]
ID_Bre2ps    [Parte el objeto designado entre dos puntos determinados]
ID_Pedit     [Edita polilφneas y mallas poligonales tridimensionales]
ID_Mledit    [Edita lφneas m·ltiples paralelas]
ID_Spledi    [Edita una Spline]
ID_TexEdi    [Edita definiciones de atributo, texto y texto m·ltiple]
ID_Hatedi    [Modifica un bloque de sombreado asociativo existente]
ID_Chamfe    [Bisela las aristas de los objetos]
ID_Fillet    [Redondea y empalma los bordes de los objetos]
ID_DimLin    [Crea cotas lineales]
ID_DimAli    [Crea una cota lineal alineada]
ID_TbDimRad  [Crea cotas radiales para cφrculos y arcos]
ID_DimAng    [Crea una cota angular]
ID_TbDimOrd  [Crea cotas de coordenadas de un punto]
ID_DimBas    [Contin·a una cota desde la lφnea de base de la cota anterior o una designada]
ID_DimCon    [Contin·a una cota desde la segunda lφnea de referencia de la cota anterior o una designada]
ID_DimCen    [Crea la marca de centro o las lφneas de centro de cφrculos y arcos]
ID_DimLea    [Crea una lφnea que une la anotaci≤n a una caracterφstica]
ID_DimTol    [Crea tolerancias geomΘtricas]
ID_TbDimText [Desplaza y gira el texto de acotaci≤n]
ID_DimRad    [Crea cotas radiales para cφrculos y arcos]
ID_DimDia    [Crea cotas de dißmetro para cφrculos y arcos]
ID_DimOrd    [Crea cotas de coordenadas de un punto]
ID_DimOrx    [Mide la coordenada X de una caracterφstica]
ID_DimOry    [Mide la coordenada Y de una caracterφstica]
ID_DimHom    [Devuelve el texto de acotaci≤n a su posici≤n por defecto]
ID_DimTro    [Gira el texto de acotaci≤n]
ID_DimTle    [Ajusta a la izquierda el texto de acotaci≤n]
ID_DimTce    [Centra el texto de acotaci≤n]
ID_DimTri    [Ajusta a la derecha el texto de acotaci≤n]
ID_DimObl    [Modifica el ßngulo oblicuo de una cota]
ID_Sphere    [Crea una esfera s≤lida 3D]
ID_Torus     [Crea un s≤lido en forma de arandela]
ID_Extrud    [Crea primitivas de s≤lido ·nicas extruyendo objetos 2D]
ID_Revolv    [Crea un s≤lido sometiendo a revoluci≤n un objeto 2D alrededor de un eje]
ID_Slice     [Corta un conjunto de s≤lidos con un plano]
ID_Sectio    [Crea una regi≤n mediante la intersecci≤n de un plano con s≤lidos]
ID_Interf    [Crea un s≤lido compuesto a partir del volumen com·n engendrado por la interferencia de s≤lidos]
ID_Amecon    [Convierte modelos s≤lidos de AME en objetos s≤lidos de AutoCAD]
ID_Union     [Crea una regi≤n o un s≤lido compuestos]
ID_Subtra    [Sustrae el ßrea o volumen de un conjunto de regiones o s≤lidos de otro conjunto]
ID_Inters    [Crea s≤lidos o regiones compuestos a partir de la intersecci≤n de s≤lidos o regiones]
ID_Boxcen    [Crea un prisma rectangular utilizando un centro especφfico]
ID_Boxcor    [Determina la primera esquina del prisma]
ID_Cylell    [Crea un cilindro con una base elφptica]
ID_Cylcen    [Determina el centro de la base circular del cilindro]
ID_Conell    [Crea un cono con una base elφptica]
ID_Concen    [Determina el centro de la base circular del cono]
ID_Wedcen    [Crea un calce utilizando un centro determinado]
ID_Wedcor    [Determina la primera esquina del calce]
ID_SurBox    [Crea la representaci≤n alßmbrica de un prisma 3D]
ID_SurWed    [Crea la representaci≤n alßmbrica en ßngulo recto de un polφgono en forma de calce]
ID_SurPyr    [Crea una pirßmide o un tetraedro]
ID_SurCon    [Crea una representaci≤n alßmbrica c≤nica]
ID_SurSph    [Crea una malla poligonal esfΘrica]
ID_SurDom    [Crea la mitad superior de una malla poligonal esfΘrica]
ID_SurDis    [Crea la mitad inferior de una malla poligonal esfΘrica]
ID_SurTor    [Crea una malla poligonal en forma de toroide]
ID_3dface    [Crea una cara 3D]
ID_Edge      [Cambia la visibilidad de los lados de una cara 3D]
ID_Revsur    [Crea una superficie girada alrededor de un eje determinado]
ID_Tabsur    [Crea una superficie tabulada mediante una curva de trayectoria y un vector de direcci≤n]
ID_Rulesu    [Crea una superficie reglada entre dos curvas]
ID_Edgesu    [Crea una malla poligonal en tres dimensiones]
ID_3dmesh    [Crea una malla poligonal de forma libre]
ID_XreAtt    [Enlaza una referencia externa]
ID_XreOve    [Sobrepone una referencia externa]
ID_XreRel    [Vuelve a cargar una o mßs referencias externas]
ID_XreDet    [Desenlaza referencias externas]
ID_XreCli    [Inserta y recorta una referencia externa]
ID_XrePat    [Visualiza y edita el nombre del camino asociado a una RefX]
ID_XreLis    [Muestra el nombre del camino de la RefX y el n·mero de RefX enlazadas]
ID_Bind      [Une los sφmbolos dependientes de una RefX con el dibujo]
ID_TbBind    [Une los sφmbolos dependientes de una RefX con el dibujo]
ID_BinBlo    [Une bloques de una RefX con el dibujo]
ID_BinLay    [Une capas de una RefX con el dibujo]
ID_BinLin    [Une tipos de lφnea de una RefX con el dibujo]
ID_BinTex    [Une estilos de texto de una RefX con el dibujo]
ID_BinDim    [Une estilos de acotaci≤n de una RefX con el dibujo]
ID_AttDef    [Crea una definici≤n de atributo]
ID_AttRed    [Redefine un bloque y actualiza atributos asociados]
ID_AttEdi    [Edita los atributos variables de un bloque]
ID_AttEdg    [Modifica la informaci≤n de atributo independientemente de su definici≤n de bloque]
ID_Hide      [Regenera un modelo tridimensional que posee lφneas ocultas]
ID_Shade     [Visualiza una imagen de aspecto plano del dibujo en la ventana actual]
ID_Render    [Crea una imagen de aspecto real a partir de una representaci≤n alßmbrica 3D o un modelo s≤lido]
ID_Scene     [Administra escenas]
ID_Light     [Administra luces y efectos luminosos]
ID_Rmat      [Administra materiales de modelizado]
ID_Matlib    [Importa y exporta materiales a y desde una biblioteca de materiales]
ID_Stats     [Visualiza datos de modelizado]
ID_Aseadm    [Realiza funciones administrativas para comandos de base de datos externa]
ID_Aserow    [Visualiza y edita datos de tabla; y crea vφnculos y conjuntos de selecci≤n]
ID_Aselin    [Gestiona vφnculos entre objetos y una base de datos externa]
ID_Asesel    [Crea un conjunto de selecci≤n a partir de lφneas vinculadas a conjuntos de selecci≤n de texto y de grßficos]
ID_Aseexp    [Exporta informaci≤n sobre vφnculos para objetos designados]
ID_Asesql    [Ejecuta el Lenguaje de consulta estructurado (SQL)]
ID_Minser    [Inserta varias copias de un bloque en una matriz rectangular]
ID_Oops      [Recupera objetos borrados]
ID_Sketch    [Dibuja una serie de segmentos de a mano alzada]
ID_Trace     [Crea lφneas s≤lidas]
ID_Tbarc     [Visualiza la barra de herramientas Arco]
ID_TbBox     [Visualiza la barra de herramientas Prisma rectangular]
ID_TbBreak   [Visualiza la barra de herramientas Partir]
ID_Tbcir     [Visualiza la barra de herramientas Arco]
ID_TbCone    [Visualiza la barra de herramientas Cono]
ID_TbCopy    [Visualiza la barra de herramientas Copiar]
ID_TbCylind  [Visualiza la barra de herramientas Cilindro]
ID_Tbell     [Visualiza la barra de herramientas Elipse]
ID_TbExplode [Visualiza la barra de herramientas Descomponer]
ID_TbFeatur  [Visualiza la barra de herramientas Operaci≤n]
ID_Tbhatch   [Visualiza la barra de herramientas Sombreado]
ID_TbInq     [Visualiza la barra de herramientas Consultar]
ID_TbLine    [Visualiza la barra de herramientas Lφnea]
ID_TbPoint   [Visualiza la barra de herramientas Punto]
ID_Tbpgon    [Visualiza la barra de herramientas Polφgono]
ID_Tbpline   [Visualiza la barra de herramientas Polilφnea]
ID_TbResize  [Visualiza la barra de herramientas Ajustar tama±o]
ID_TbRotate  [Visualiza la barra de herramientas Girar]
ID_TbSelect  [Visualiza la barra de herramientas Seleccionar objetos]
ID_TbSpace   [Cambia de Espacio papel a Espacio modelo y viceversa]
ID_TbSpledi  [Visualiza la barra de herramientas Edici≤n especial]
ID_Tbtext    [Visualiza la barra de herramientas Texto]
ID_TbToolwi  [Visualiza la barra de herramientas Ventanas de herr.]
ID_TbTrim    [Visualiza la barra de herramientas Ajustar longitud]
ID_TbWedge   [Visualiza la barra de herramientas Calce]


***ACCELERATORS
[CONTROL"L"]^O
[CONTROL"R"]^V
ID_Undo   [CONTROL+"Z"]
ID_Cut    [CONTROL+"X"]
ID_Copy   [CONTROL+"C"]
ID_Paste  [CONTROL+"V"]
ID_Open   [CONTROL+"A"]
ID_Print  [CONTROL+"I"]
ID_New    [CONTROL+"N"]
ID_Save   [CONTROL+"G"]