home *** CD-ROM | disk | FTP | other *** search
- ====================================
- RE: 82C929 MAD16 Pro Release 2.20
- ====================================
-
- To: OPTi 82C929 Customers
- Date: 12/08/94
- ==================================================================
-
- 0) What's New in this version
-
- This version has been enhanced from 2.12/2.13. Changes added are:
-
- a) Support OTHER CD drives which not listed in our installer's CD
- drive list. OTHER IDE, Sony compatible and Panasonic compatible
- are those which we are not aware of at the time software release
- but actually could be interfaced with our sound cards. What
- the software does, when OTHER is selected, is to setup the
- CD-ROM interface of the sound card. The CD driver installation
- then has to be taken care by you after the audio software
- installation is done.
-
- b) Maintain Green PC feature after IRQ re-selection
-
- c) Reset FM MIDI device during INIT
-
- NOTE:
- This version does not include third party Windows Application.
- Therefore, DISK #2 should be ignored. Copy contents under \disk1
- to a single diskette and start installation.
-
- 1) Introduction
-
- This package contains the above version of Software release for
- OPTi 82C929 Audio Device. This software contains a full fledge
- INSTALLER plus Testing and Configuration program all contained
- within a Windows Look-a-Like GUI.
-
- What the INSTALLER will do for you:
- a) Gather installation info. from you as to which drive and directory
- this software should be installed.
- b) Check available memory and disk space (warns if not sufficient).
- c) Gather and detect correct Windows directory.
- d) Copies files to your hard disk.
- e) Prompts you if you have a CD-ROM attached to your MAD16 Pro.
- If Yes: - Asks you for the CD-ROM type you have.
- - Assigns the correct CD-ROM driver for your drive.
- - Checks and installs correct MSCDEX.EXE to work with your
- drive depending on DOS version.
- f) Shows Configuration and Test panel for you to setup and test your
- Sound Card. You may perform 8-bit, 16-bit, and FM Synthesis test.
- You may also change your volume settings.
- g) After the above, INSTALLER will update your system files and give
- you an option to reboot your system.
-
- What the Testing and Configuration (SNDINIT.EXE) will do for you:
- a) Allow you to test and/or configure/reconfigure your
- - existing hardware settings;
- - existing CD-ROM settings in which CONFIG.SYS and AUTOEXEC.BAT will
- be updated and you will be prompted to reboot your system.
- - and perform sound tests and volume changes.
-
-
- 2) File List of the 929V220D.ZIP
-
- For the general release diskette,
-
- [Diskette # 1]
- INSTALL.COM ; the small INSTALL bring-up program
- SNDINIT.EXE ; main INSTALL and Device Config Program
- PKUNZIP.EXE ; 03-15-90 version of UNZIP tool
- INSTALL.DAT ; on-line help text file
- README.TXT ; latest release information;
- ; customers MUST change this file themselves to
- ; reflect their latest product info.
- CDROM.CFG ; the CD-ROM drive list file
- LOGO.BMP ; custom LOGO that appears on page 1
- DISK1 ; the install instruction file
- TOOLS.ZIP ; DOS utilities to be installed into
- ; SOUND16 Home Dir
- DRIVERS.ZIP ; CD-ROM drivers and MSCDEXs: 5.0/6.0/6.2
- ; to be installed into SOUND16 Home Dir
- WINDRV.ZIP ; SOUND16 Windows Drivers to be installed
- ; into the 'WINDRV' sub Dir
- [Diskette # 2]
- WINAPP.ZIP ; Windows Audio Applications to be installed
- ; into 'WINAPP' sub Dir
-
- For OPTi customers in-house use,
-
- README.1st ; this document
- PKZIP.EXE ; version 03-15-90 PKZIP, to pack your WINAPP.ZIP
- ; if you'd like to do that.
-
-
- 3) How to create Install Diskettes from 929V220D.ZIP
-
- . unZIP the 929V220D.ZIP file into a temp. dir in hard Drive
- use: pkunzip -d 929V220D.zip to unzip
- . take out README.1st and PKZIP.exe
- . copy all the files in subdir 'DISK1' and 'DISK2' into 2
- diskettes to mark as "1 of 2" and " 2 of 2"
- . use them as INSTALL diskettes
-
- To Run the INSTALLER
-
- . insert the #1 diskette into a: or b: drive
- . type a:\INSTALL or b:\INSTALL
-
-
- %% END %%
-