home *** CD-ROM | disk | FTP | other *** search
- PHONE BLASTER README.TXT
- ========================
-
- This file contains additional information to supplement the manual.
- Please read all the sections before you proceed with the installation.
-
-
- This file contains the following sections:
-
- 1. Maximum Recording Rates For Phone Blaster
- 2. Mixer Settings For Phone Blaster
- 3. VoiceView Modem Support in Microsoft Windows 95
- 4. Acknowledgement
-
-
- 1. Maximum Recording Rates For Phone Blaster
-
- The sampling rate used for recording is largely influenced by your
- computer's main processor. To obtain 16-bit digital audio using
- Windows, the following maximum recording rates are suggested.
-
- ╔═══════════════════════╤══════════════════════╗
- ║ SYSTEM │ RECORDING RATE ║
- ╠═══════════════════════╪══════════════════════╣
- ║ │ ║
- ║ 386 and above │ Stereo - 44KHz ║
- ║ │ Mono - 44KHz ║
- ║ │ ║
- ╟───────────────────────┼──────────────────────╢
- ║ │ ║
- ║ 386 SX and below │ Stereo - 22KHz ║
- ║ │ Mono - 44KHz ║
- ║ │ ║
- ╚═══════════════════════╧══════════════════════╝
-
- To obtain optimal performance, try configuring the sound card to
- use a high DMA (Direct Memory Access) channel under Windows. Refer
- to your Getting Started Manual for more information on setting up
- the sound card to use a high DMA channel.
-
-
- 2. Mixer Settings For Phone Blaster
-
- To adjust the volume of the modem for Phone Blaster, run
- CTMIXER.EXE (Creative Mixer) in Windows or SB16SET.EXE in DOS and
- adjust the setting for PC Speaker.
-
- To obtain optimal performance when using the Speaker Phone mode,
- run CTMIXER.EXE (Creative Mixer) in Windows or SB16SET.EXE in DOS
- and turn off the MIC output.
-
-
- 3. VoiceView Modem Support in Microsoft Windows 95
-
- Microsoft Windows 95 supports VoiceView Modem in the form of a File
- Transfer application.
-
- To install:
-
- a) Double click the "Modems" applet in Control Panel.
- b) Click the "Add..." button to add a new modem.
- c) Select the option "Don't detect my modem; I will select it from
- a list." and click the "Next >" button.
- d) Select "VoiceView Modem Types" in the "Manufacturers:" list.
- e) Select the respective model for your Phone Blaster in the
- "Models" list and click the "Next >" button.
- f) Select the communication port to use with your Phone Blaster and
- click the "Next >" button.
- g) Insert the appropriate Microsoft Windows 95 disks when
- prompted.
- h) Click the "Finish" button when your modem has been setup
- successfully.
-
-
- 4. Acknowledgement
-
- The included version of SB16FM.DRV is from Voyetra Technologies.
-
-
- ******** END OF README.TXT ********
-
-