Computer Tool Software

home *** CD-ROM | disk | FTP | other *** search

/ Computer Tool Software / soft.iso / tools / HWINF426 / HWINFO.DOC < prev next >

Wrap

Text File | 1997-12-14 | 26.6 KB | 653 lines

╔════════════════════════════════════════════════════════════════════════════╗ ║ HWiNFO - Copyright (c)1995-97 RealSoft, All Rights Reserved. ║ ║ ────────────────────────────────────────────────────────────────────────── ║ ║ Version 4.2.6 ; Last Update: Dec-15-1997 ║ ╚════════════════════════════════════════════════════════════════════════════╝ ┌──────────────────────────────────────────┐ │ USE THIS PROGRAM ONLY AT YOUR OWN RISK │ └──────────────────────────────────────────┘ HWiNFO is a *POWERFUL* hardware detection program. It is simple, quick and on most systems very efficient. It "tries" to give only important information about all the hardware devices in your computer so that you need not look inside the PC to see what's there. I hope you don't want HWiNFO to determine your mouse cable length or the speed of your computer fan... :-) The newest version is always (immediately) available at: My homepage - http://www.svf.stuba.sk/~malik SAC ftp - ftp.elf.stuba.sk/pub/pc/utilmisc http://ftp.elf.stuba.sk/packages/pub/pc/utilmisc SAC BBS - +421 7 5438 232 (19,200 Baud) +421 7 5438 295 (28,800 Baud) At other sitez/BBS later... SimTel - ftp.simtel.net/pub/simtelnet/msdos/sysinfo SAC mirrors - ftp.uakom.sk/pub/mirrors/sac/utilmisc ftp.intec.sk/sac/utilmisc ftp.vse.cz/pub/msdos/SAC/pc/utilmisc ftp.cs.tu-berlin.de/pub/msdos/mirrors/stuba/pc/utilmisc ftp-beer.bke.hu/vol1/pub/sac/pc/utilmisc ftp.pwr.wroc.pl/pub/pc/sac/utilmisc cert.unisa.it/pub/PC/SAC/utilmisc ftp2.itb.it/pub/PC/SAC/utilmisc ftp.nsysu.edu.tw/PC/SAC/utilmisc 192.217.228.45/SAC/pub/pc/utilmisc ftp.comp.hkbu.edu.hk/pub/sac/utilmisc ftp.cdrom.com/pub/sac/utilmisc ## Requirements ############################################################## - cca. 470 (+40) KBytes of free system memory Well, that's all. I hope, it will work on all machines. ## Utils ##################################################################### Along with HWiNFO, there are four utilities distributed with: GETBIOS.COM This utility retrieves all BIOS images and saves them to files <BIOSseg>.ROM This program doesn't run in V86 mode in order to avoid BIOS relocation. GETDDC.COM This utility saves VESA Display Data Channel data to file DDC.DAT if your video card and monitor support DDC GETPCI.EXE This utility saves all PCI devices data into files <VendorID><DeviceID>.PCI GETPNPRS.EXE This utility saves resource data for all Plug-and-Play capable devices into files PNP<CSN>.RES These utilities are free and are designed to help me improving HWiNFO if you send the results to me. ## Registration ############################################################## HWiNFO is shareware, meaning that you can test the program free and check if it is useful for you. The public (unregistered) version has all the features as the registered version except the "Create report file" feature. The other disadvantage is the message that HWiNFO isn't registered and that you have to press a random key while the results are shown. If you think you could use this program and don't want to see that stupid message, or if you continue using it after a trial period of 30 days, you should register. Otherwise after this period HWiNFO becomes an illegal copy and you have to delete it (ho-ho-ho :-)). If you decide to register, you should print out the file "REGISTER.FRM", fill it and send to this address: Martin Malík Jakubovo nám. 3 811 09 Bratislava SLOVAK REPUBLIC EUROPE If you include your Internet e-mail address, you will receive the registration code via e-mail, otherwise snail mail. Once you have obtained the nice code needed to register, put exactly the same name, and the code into the [About|Register] menu of HWiNFO and the current version will become registered. Well, the Registration fee is: ╔══════════════════╦══════════════════╗ ║ Non-Commercial ║ Commercial ║ ╠═════╤═════╤══════╬═════╤═════╤══════╣ ║ DEM │ US$ │ Sk/KC║ DEM │ US$ │ Sk/KC║ ╔═══════════════╬═════╪═════╪══════╬═════╪═════╪══════╣ ║ 1 User ║ 35 │ 20 │ 500 ║ 70 │ 40 │ 1000 ║ ╟───────────────╫─────┼─────┼──────╫─────┼─────┼──────╢ ║ 2-10 Users ║* 30 │* 16 │* 450 ║ 60 │ 32 │ 900 ║ per copy ╟───────────────╫─────┼─────┼──────╫─────┼─────┼──────╢ ║ 11-20 Users ║* 25 │* 13 │* 400 ║ 50 │ 26 │ 800 ║ per copy ╟───────────────╫─────┼─────┼──────╫─────┼─────┼──────╢ ║ 21-50 Users ║* 20 │* 10 │* 300 ║ 40 │ 20 │ 600 ║ per copy ╟───────────────╫─────┼─────┼──────╫─────┼─────┼──────╢ ║ 51-100 Users ║* 10 │* 5 │* 100 ║ 20 │ 10 │ 200 ║ per copy ╟───────────────╫─────┴─────┴──────╫─────┴─────┴──────╢ ║ UNLIMITED ║Contact the author║Contact the author║ ╚═══════════════╩══════════════════╩══════════════════╝ * for schools, educations, etc. When registering per Eurocheque or bank transfer please add 10% to the total price to cover bank transfer costs. For any special requirements contact the author. A registration is valid for all future versions. And there will be a lot of newer versions of course. You should register NOW ! ## Comments... ############################################################### The CPU ID is available only on 386+ CPUs and HWiNFO uses three ways to obtain this ID: Method 1 - Does Reset the CPU while A20 is Enabled. This method works on all systems, but the Reset handler gets control after BIOS. And some BIOSes (some newer AMI/Award BIOSes) destroy CPU ID (EDX) and therefore this ID could be invalid. This method is default <Enabled> in Setup section. Method 2 - Does Reset the CPU while A20 is Disabled. This method works only on some machines, which do have a Fully-Terminated bus. It's the best way to obtain CPU ID, because it gets control immediately after Reset (the BIOS can't destroy EDX). I've found some problems with this method while running with Norton cache. This method is default <Disabled> in Setup section. Method 3 - Try to use this method if your BIOS destroys CPU ID. But it works only on systems, which do not have Main BIOS (area at 0F000:0) Write-Protected, because it modifies it for a bit, and then restores back. This method is on some machines the only way to obtain CPU ID. This method is default <Enabled> in Setup setction. HWiNFO tries to determine CPU ID this way, via: 1. CPUID instruction 2. BIOS (INT 15h) 3. Method 2 (if Enabled) 4. Method 3 5. Method 1 If you have an UMC U5SX/SD/SLV/486DX2/SX2, Enhanced Am486DX2/DX4/DX4-WB, AMD-K5 and above, Intel 486DX/SX/DX2 SL-Enhanced, IntelDX4, IntelSX2, IntelDX2 W-B Enh. or Intel Pentium(R) and above, there is no need to Reset the CPU (these CPU support CPUID instruction). The most CPUs today support CPUID instruction. Note: NexGen Nx586 does NOT support the CPUID instruction. Cyrix 5x86 and 6x86 support the CPUID instruction only if CPUIDEN bit in CCR4 register is set. HWiNFO 3.0.7+ sets this bit automatically. Disabling "CPU ID detection via Method 1, 2 and 3" reduces your CPU detection ability ! And if there's no other way to obtain this ID (via BIOS or CPUID instruction), it won't identify 386SL, i386CX/EX, 486DX2, IBM 486... and some other CPUs. Do this only if your system hangs while CPU detection. Some BIOSes simply OVERWRITE the CPU ID (EDX) :-< ! In this case is an invalid CPU ID displayed and the CPU problably not correctly identified. If this problem occurs, try to use Method 3 (but your Main BIOS must be Write-Enabled !). If it doesn't work, try to use Method 2 (but you must have a Fully-Terminated bus !). And if HWiNFO still displays, that Method 1 was used to obtain CPU ID, not Method 2 nor 3 can obtain it. S3 ViRGE cards seem to crash while TV Tuner test. If so, disable the "Check TV Tuner" option in Setup. Stacker Compression Card and 3Com EtherLink III Adapter detection routines cause crash with some Network cards. You can disable them in the Setup section (Stacker check is default disabled; 3Com EtherLink III detection is enabled). On some old motherboards are random number obtained from not used I/O ports and this may cause invalid identification of some hardware (e.g. WSS). I don't know how to solve this problem. The Mainboard Chipset indentification works only on newer (≈ 1991 and above) AMI and newer AWARD BIOSes. HWiNFO is also able to detect: √ Intel 82420TX SATURN Intel 82420EX ARIES √ Intel 82430LX MERCURY √ Intel 82430NX NEPTUNE √ Intel 82430FX TRITON √ Intel 82430HX TRITON II √ Intel 82430VX TRITON II √ Intel 82430MX MOBILE TRITON √ Intel 82430TX MOBILE TRITON II √ Intel 82440FX NATOMA Intel 82440LX AGPset √ Intel 82450KX/GX ORION √ AMD-640(TM) chipsets, not depending on the type of BIOS. Fixed Disk Data Transfer rate reads data from one physical sector until 4 secconds. Some caches (like Hyperdisk; but NCACHE or SMARTDRV don't) could cause invalid results. Also some mainboards, which have incompatible timers could cause problems. Fixed Disk Average Seek receives results while seeking permanently 100* from cylinder 0 to a cylinder, which is 1/3 of the max. cylinder number. Thus some programs could report another results if they seek to an another cylinder. SCSI disks and some Cache programs (Hyperdisk) don't generate Seek requests, thus the Seek and RPM result is abnormal and HWiNFO displays <N/A>. PCMCIA detection requires Socket Services or Card Services to be installed. If you want more info about sockets, install Card Services. Video Throughput benchmark depends only on External CPU frequency and the type of Video board used; e.g. 486DX-33 with the same graphics board as an i486DX4-100 (running at 3*33 MHz) report the same Video Throughput speed ! CD-ROM benchmark requires MSCDEX.EXE (Microsoft CD-ROM Extensions) to be installed and an inserted data CD. Intel Pentium(R) and above CPUs do not report, that the "APIC on-chip" feature is present. Most of them (P54C yes, but P54CQS and P54LM don't) have an on-chip APIC, but don't report it, if it isn't supported by external hardware. Dhrystone benchmark tests the performance of CPU and Memory, but only in 16-bit code. And so, a 150 MHz Pentium Pro (which is designed and tuned especially for 32-bit code) returns a rather low Dhrystone result. So, its performance while running with 16-bit applications is comparable to a 100 MHz Pentium P54C. ## PCI Chipsets ############################################################## If you have an Intel 420LX/420NX/430FX/430HX/430VX/430MX/430TX, SiS 85C511 of AMD-640 chipset, HWiNFO is able to detect the type of External Cache and its size direct from the PCI chipset registers. The possible types are: - Synchronous Pipelined Burst Cache - Synchronous Burst Cache - Asynchronous SRAM Cache - Dual-Bank Pipelined Burst Cache HWiNFO reports the size, memory type, DRAM Read Burst Timing, DRAM Write Burst Timing and Error Check/Correction type for each DRAM row for these chipsets: Reports Reports RAM Row Recognized DRAM R/W Recognized Error Chipset Size DRAM Type Burst Check/Correction Type ┌──────────────────┬───────┬─────────────────┬───────┬───────────────────────┐ │ Intel 82420TX │ Yes │ FPM │ No │ - │ │ Intel 82420EX │ Yes │ FPM │ No │ - │ │ Intel 82420LX │ Yes │ FPM │ No │ - │ │ Intel 82420NX │ Yes │ FPM │ Yes │ - │ │ Intel 82430FX │ Yes │ FPM, EDO │ Yes │ - │ │ Intel 82430MX │ Yes │ FPM, EDO │ Yes │ - │ │ Intel 82430HX │ Yes │ FPM, EDO │ Yes │ Parity, ECC │ │ Intel 82430VX │ Yes │ FPM, EDO, SDRAM │ Yes │ - │ │ Intel 82430TX │ Yes │ FPM, EDO, SDRAM │ Yes │ - │ │ Intel 82440FX │ Yes │ FPM, EDO, BEDO │ Yes │ None, Parity, EC, ECC │ │ Intel 82440LX │ Yes │ EDO, SDRAM │ Yes │ None, EC, ECC │ │ Intel 82450KX/GX │ Yes │ FPM │ No │ None, ECC │ │ SiS 496/497 │ Yes │ FPM │ No │ - │ │ AMD-640 │ Yes │ FPM, EDO, SDRAM │ No │ Parity, ECC │ └──────────────────┴───────┴─────────────────┴───────┴───────────────────────┘ Note: FPM = Fast-Page Mode (old standard DRAM type) EDO = Extended Data-Out SDRAM = Synchronous DRAM BEDO = Burst EDO EC = Error Check only ECC = Error Check and Correction ## Video Memory Types ######################################################## HWiNFO is able to detect these types of Video RAM: √ DRAM/VRAM - many chipsets √ EDO - for S3 chipsets √ WRAM - for Matrox MGA-2064W, MGA-2164W (Millennium / II) card SDRAM - (Synchronous DRAM) for Cirrus Logic chipsets (CL-GD5480) √ SGRAM - (Sync Graphics RAM) for Matrox MGA-1064SG and S3 √ RDRAM - (Rambus DRAM) for Cirrus Logic chipsets (CL-GD546x) √ MDRAM - (Multibank DRAM) for Tseng ET6000 ## Codenames ################################################################# Codenames for Intel Processors: P5 - Intel Pentium(R) Processor: Old 50/50 (Engineering Sample), 60/60 and 66/66 MHz. P54C - Intel Pentium(R) Processor: Later 75/50, 90/60, 100/50, 100/66, 120/60, 133/66, 150/60, 166/66, 180/60, 200/66 and 233/66 MHz without VRT, with on-chip APIC, Dual Processing Features and FRC support. P54CM - Intel Pentium(R) Update Processor: Old 90MHz Slave processor in Dual Processor system. P54CQS - Intel Pentium(R) Processor: 75/50, 100/66, 120/60, 133/66, 166/66 and 200/66 MHz without VRT, on-chip APIC, Dual Processing Features, Upgrade and FRC support. P54LM - Intel Pentium(R) Mobile Processor: 75/50, 120/60, 133/66 and 150/60 Low Power versions (2.9 V) supporting VRT. These Processors are shipped without APIC on-chip, Dual Processing Features, Upgrade and FRC support. P24T - Intel Pentium(R) OverDrive(R) Processor: PODP5V63 63/25 MHz and PODP5V83 83/33 MHz OverDrive for 486 CPUs. P24CT - Intel Pentium(R) OverDrive(R) Processor: OverDrive for IntelDX4(TM) Processor. P5T - Intel Pentium(R) OverDrive(R) Processor: PODP5V120 120/60 MHz and PODP5V133 133/66 MHz OverDrive for Intel Pentium(R) P5 60/60 and 66/66 MHz Processors. P54CT - Intel Pentium(R) OverDrive Processor: PODP3V125 125/50 MHz, PODP3V150 150/60 MHz and PODP3V166 166/66 MHz OverDrive for Intel Pentium(R) P54C 75/50, 90/60 and 100/66 MHz Processors. P55C - Intel Pentium(R) Processor with MMX(TM) Technology: 166/66, 200/66 and 233/66 MHz MMX, 32 KBytes First Level Cache and better Branch Prediction. P55LM - Mobile Intel Pentium(R) Processor with MMX(TM) Technology: 200/66 and 233/66 MHz P55CTP - Intel Pentium(R) OverDrive(R) Processor with MMX(TM) Technology: PODPMT60X150 125/50, 150/60, PODPMT66X166 166/66, PODPMT60X180 180/60 and PODPMT66X200 200/66 for Intel Pentium(R) 75/50, 90/60 and 100/66 Processors. P6 - Intel Pentium(R) Pro Processor: 133/66 (Engineering Sample), 150/60, 166/66, 180/60 and 200/66 Level-2 cache 256K or 512K. P6T - Intel Pentium(R) Pro OverDrive(R) Processor. P6L Klamath - Intel Pentium(R) II Processor: 233/66, 266/66 and 300/66 P6 with MMX(TM) Technology and without Level-2 on-chip cache, S.E.C. cartridge Note: VRT = Voltage Reduction Technology APIC = Advanced Programmable Interrupt Controller DP = Dual Processing FRC = Functional Redundancy Checking (requires DP) MMX = Multimedia Extensions in CPU - 57 new 64-bit instructions, SIMD architecture ... S.E.C = Single Edge Contact (CPU and Level-2 cache on one substrate) ## IDE Disk Transfer Modes ################################################### HWiNFO reports transfer modes for all IDE/ATAPI drives, which support it. Max. PIO transfer mode: PIO x DMA Transfer Modes: SW: a1 (m1), MW: a2 (m2), Ultra: a3 (m3) Where: x = Maximum supported PIO transfer mode SW = Singleword DMA transfer mode MW = Multiword DMA transfer mode Ultra = Ultra-DMA transfer mode a1, a2, a3 = Current active mode m1, m2, m3 = Max. supported mode ┌─────────────┬───────────────┐ │ Transfer │ Maximum │ │ Mode │ Transfer rate │ ├─────────────┼───────────────┤ │ PIO 0 │ 3.33 MB/s │ │ PIO 1 │ 5.22 MB/s │ │ PIO 2 │ 8.33 MB/s │ │ PIO 3 │ 11.11 MB/s │ │ PIO 4 │ 16.66 MB/s │ ├─────────────┼───────────────┤ │ DMA 0 │ 4.16 MB/s │ │ DMA 1 │ 13.33 MB/s │ │ DMA 2 │ 16.66 MB/s │ ├─────────────┼───────────────┤ │ Ultra-DMA 0 │ 16.66 MB/s │ │ Ultra-DMA 1 │ 25.00 MB/s │ │ Ultra-DMA 2 │ 33.33 MB/s │ Ultra-DMA/33 └─────────────┴───────────────┘ ## Running HWiNFO under V86 Memory Managers ################################## HWiNFO (v3.00+) is able to run in Virtual86 mode under some circumstances (it means, under some applications, which turn the V86 mode on). But ONLY those, which support the Windows INIT BROADCAST and handle it correct. Such known applications are: - Microsoft EMM386 Expanded Memory Manager - Quarterdeck QEMM386 Expanded Memory Manager - Qualitas 386MAX Expanded Memory Manager - Nu-Mega Soft-ICE Debugger ....... These applications are able to switch to Real mode when they receive the Windows INIT BROADCAST message. But if you run HWiNFO in V86 there may occur some problems, especially during CPU RESET (like hang, crash...). Also some Memory Managers, which relocate BIOSes may cause misidentification of BIOS (like QEMM386's Stealth Mode). HWiNFO works best under EMM386 (I haven't found any problems). The method of detecting CPU frequency via TSC (Time Stamp Counter) doesn't work if V86 mode is turned on. <<< So, I prefer runnig HWiNFO in Real Mode. >>> HWiNFO is unable to run under Microsoft Windows and Windows95 DOS box, Windows NT VDM and IBM OS/2, because they don't switch to Real Mode and also manipulate Benchmark results, BIOS scan, are able to control direct I/O operations, which can cause invalid results and Windows NT doesn't allow 16-bit applications to directly access the disk and some hardware routines cause problems, thus it can't be supported. ## Secondary Video Info ###################################################### RISC Graphics Processor: currently identifies only Hitachi HD63484 ACRTC Scanning for TMS: checks for TMS340x0 processor on several ports and tries to get vendor and device name (detection routine from SPEA GDC drivers, I don't know if it works with other TMS cards too) TMS Boot EEPROM: gets info from Boot Software; this won't probably work with other cards than SPEA (I don't know :-( ) TIGA driver: gets info from TIGA driver if it's loaded (TIGACD.EXE) Also found as: identifies all SPEA Graphiti series cards from GDCINI.DAT and checks for HP IGC-20 and NEC MultiSync Graphics Engine You can obtain info such as: e.g.: RISC Graphics Processor: Hitachi HD63484 (ACRTC) Scanning for TMS: N/A TMS Boot EEPROM: N/A TIGA driver: N/A Also found as: SPEA Graphiti Flash 1G2-HE or: RISC Graphics Processor: N/A Scanning for TMS: (C) SPEA Software AG HILITE1024 TMS Boot EEPROM: SPEA HiLite1024 TIGA driver: N/A Also found as: SPEA Graphiti HiLite1024 or: RISC Graphics Processor: N/A Scanning for TMS: <I really don't know what it'll display> TMS Boot EEPROM: -||- TIGA driver: HP A1083A Intelligent Graphics Controller 20 Also found as: Hewlett Packard IGC-20 A1083A ## Creating a logfile or whole report ######################################## You can create a log-file by pressing the <F2> key; it will add the results from current screen to a file named "hwinfo.log". You can change the name of this file by entering the .log filename you want, as a parameter to hwinfo; e.g. "hwinfo.exe my_p7.log". There is also a "Create report file" feature, but it's available only for registered users. It will create automatically a complete logfile, when you start HWiNFO using the "-r" switch. There is no need to navigate HWiNFO through all screens. ## Thanx ##################################################################### I want especially to thank: ∙ Beta testers: Boris Hurínek [BHsoft] (hurinek@axa.sk) Erik Francisci (jumper!franci@dec3.dcs.elf.stuba.sk) Igor Junas (junas@axis.sk) Matús Rosa (rosa@???.sk) Milan Marusinec (marusin@lithec.sk) ∙ Alex V. Potemkin and Potemkin's Hackers Group (avp@dvm.msk.ru) ∙ Aad Offerman (offerman@einstein.et.tudelft.nl) - CHIPLIST ∙ Ján Gúcik (jan.gucik@vslib.cz) - IntroScope ∙ Tomás Lehuta (lehuta@elf.stuba.sk) - GUS Memory routs, hints ∙ Peter Hubinsky (hubak@elf.stuba.sk; SAC fileadmin) - distribution ∙ Emil Laurentiu (lcarmen@u1.ici.ro) - hints ∙ Andrew Nelson (anelson@atlas.co.uk) - English language suggestions :-) ∙ Marek Smihla (ceit@internet.sk) - reports & hints ∙ Jiang Hong (zlzhang@pku.edu.cn) - BL3 & hints ∙ Robert Cline, Tim McCarthy (support@mailbox.intel.com) - id of Intel CPUs ∙ Tamas Miklos (fieryofup@geocities.com) - WSS rout, hints, ASMDEMO ∙ ESCOM CS (escom_support@brn.pvtnet.cz) - info ∙ Olivier Cahagne (cahagn_o@epita.fr) - SysInfo observatory ∙ Thomas Mainka (100112.2132@compuserve.com) - reports ∙ Christian Klak (drk-soft@gmx.net) - Acer info ∙ All other people, who have sent me bug reports and suggestions (*!*@*.*) Greetings to: ∙ Lubos Vrtik (vrtik@vuje.sk) - cracking <-> protecting impressions, HMVS ∙ C00LMAN of Siam Hacker's Gang - KeY GeNeRaToR 4 HWiNFO v<4.0.0 (I'm waiting 4 keYGen 4 HWiNFO v4.0.0+) ∙ eGIS / pCE - *v3Ry nICE* K3YG3N 4 HWiNFO ≤4.2.4, 4.2.5 (No idea how to receive the true magic numbers for v4.0.0+ ?) ∙ dEVIL / uCF - *nICE* kEYZ 4 HWiNFO v4.2.2 (Must have been a hard work) ## Disclaimer ################################################################ ╔════════════════════════════════════════════════════════════════════════════╗ ║ All product names are copyright and registered trademarks/tradenames of ║ ║ their respective owners. ║ ╚════════════════════════════════════════════════════════════════════════════╝ HWiNFO IS COPYRIGHTED MATERIAL AND PROTECTED BY APPLICABLE COPYRIGHT LAWS AND INTERNATIONAL TREATY PROVISIONS. THE PROGRAM AND ITS DOCUMENTATION ARE COPYRIGHTED BY THE ORIGINAL PROGRAMMER/AUTHOR (COPYRIGHT HOLDER). ALL RIGHTS ARE RESERVED CONCERNING FUTURE CHANGES OF THE NAME AND CONTENTS OF THIS DISTRIBUTION PACKAGE. NO CHANGES MUST BE MADE FOR ANY REASONS AT ANY TIME BY ANYBODY IN ANY ASPECT, INCLUDING, BUT NOT LIMITED TO, MODIFICATION OF THE COPYRIGHT NOTICE OR CHANGES OF THE COMPILED BINARIES HEREBY ALTERING THE ORIGINALLY INTENDED PROGRAM EXECUTION FLOW. RealSoft SPECIFICALLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, AND ALL LIABILITY, INCLUDING CONSEQUENTIAL AND OTHER INDIRECT DAMAGES, FOR THE USE OF THIS SOFTWARE, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS. RealSoft DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORS WHICH MAY APPEAR IN THIS CODE NOR ANY RESPONSIBILITY TO UPDATE IT. THE PERSON USING THE SOFTWARE BEARS ALL RISKS AS TO THE QUALITY AND PERFORMANCE OF THIS SOFTWARE. ## END #######################################################################