home *** CD-ROM | disk | FTP | other *** search
- NDIS...................General installation notes
-
- This document applies to the EtherExpress(tm) 16, 16TP, 16C, FLASH,
- FLASH TP, FLASHC, MCA, and MCA/TP. It contains installation notes
- for installing the driver. It does not explain how to configure an
- EtherExpress board. For instructions about configuring the board,
- see either the Expert's Guide or the Complete Guide for your board.
-
- This document (or an updated version) is also available on FaxBACK,
- document #6309.
-
- INTRODUCTION:
- -------------
- Many different network operating systems use a standard NDIS driver to
- talk to the network adapter. The NDIS subdirectory on the EtherExpress
- disk contains the files you need to use the EtherExpress card with one of
- these operating systems.
-
- FILE Purpose
- ---- --------------------------------------------
- EXP16.DOS NDIS driver for DOS workstations.
-
- EXP16.OS2 NDIS driver for servers & OS/2 workstations.
-
- PROTOCOL.INI Fragment of the general PROTOCOL.INI file. This fragment
- contains information specific to the EtherExpress 16
- boards. You'll need to add this fragment to the general
- PROTOCOL.INI file.
-
- EXPSTAT.EXE A utility for analyzing problems after your driver is
- loaded. You can run this under OS/2 (inside or outside the
- compatibility box) or under DOS.
-
- Your NOS may also make use of a Network information (.NIF) file. If so,
- you can find the .NIF file for DOS workstations in the
- \MSLANMAN.DOS\DRIVERS\NIF directory, and the .NIF file for OS/2
- workstations in the \MSLANMAN.OS2\DRIVERS\NIF directory.
-
- There are some specific documents on FaxBACK that may be of help:
- ---------------------------------------------------------------------
- EtherExpress 16 Family: Retix Configuration Information......... 6452
- EtherExpress 16 Family: DEC Pathworks Configuration Information. 6454
- EtherExpress 16 Family: FTP PC/TCP Configuration Information.... 6321
-
-
-
-