The Devil's Doorknob BBS Capture (1996-2003)

home *** CD-ROM | disk | FTP | other *** search

/ The Devil's Doorknob BBS Capture (1996-2003) / devilsdoorknobbbscapture1996-2003.iso / W / WWIVEDIT / WWIVEDIT.HLP < prev next >

Wrap

Text File | 1993-01-01 | 23KB | 580 lines

For information on how to contact the author, request help on General. For a description on the layout of this file, Look after the EOF START Help on Help Default Keys General Colors Macros Exiting Formating Tag Lines Block Commands Extended Commands Slash Commands Technical Stuff Spell Checker END LOCAL Local Keys Local Macros Inserting Files BBS Tag Lines Chat Mode Sysop Information Special Setups END HELP ON HELP: SOT Welcome to the Help system of 2WWIV5Edit0! This is a interactive help system based on the idea "Help should be easy to use and informative at the same time." All you need to do is use your Arrow keys to move around the shown topics, and press 1Enter0 over the topic you want to learn about. To exit help, you simply press 1ESC0 or 1Q0, and it will exit. If your arrow keys do not work properly (not at all that is), then you can use the following keys instead of the arrow keys (unless your sysop has modified them): 1Control-2U 3: 0Up Arrow 1Control-2J 3: 0Down Arrow 1Control-2G3 :0 Left Arrow 1Control-2Z3 : 0Right Arrow .P EOT DEFAULT KEYS: SOT The settings file 1DEFAULT0 Maps the following keys: 2^A0 : Control-A Macro 2^N0 : Non-Destructive backspace ^B : Page Down 2^O0 : Help! ^C : Center Line 2^P0 : WWIV Color 2^D0 : Control-D Macro ^Q : Extended Command 2 ^E : Word Right (moves cursor) ^R : Redisplay Everything 2^F0 : Control-F Macro ^S : Word Left (moves cursor) ^G : Move cursor left ^T : Page Up 2^H0 : Backspace ^U : Move cursor up on line 2^I0 : Tab ^V : Toggle Insert Mode ^J : Move cursor down 2^W0 : Delete word to left of cursor ^K : Extended Command 1 2^X0 : Delete from cursor to start of line ^L : Insert a blank line ^Y : Delete line cursor is on 2^M0 : Enter Key ^Z : Move Cursor Right ^] : Toggle between different Top Screens Note: 1^R0 means press and hold the 1Control0 key, and then press 1R0. Highlighted keys work, work in either the same, or almost the same way that they do in the WWIV Line editor. .P 2WWIV5Edit 0will also properly translate the arrow keys if they are mapped as ESC[H=Home ESC[A=Up ESC[D=Left ESC[C=Right ESC[K=End ESC[B=Down ESC[r=Toggle Insert/Overwrite mode ESC[s=Del Char The 1DEFAULT0 mapping also supports Doorway mode on most keys (such as the arrows and insert/delete). .P EOT COLORS: SOT To insert a WWIV color into text, simply press 1^P0 followed by a character signifying the color. The following table shows the legal colors: .COLORTABLE The Entry 11(49 )0 is interpreted in the following way: 1 is the color character. 49 is the ASCII value of that character (for characters that don't have printable characters). .P EOT MACROS: SOT Macros are once again External to 2WWIV5Edit0. To define a macro, you must go into the defaults section of the BBS and select "Update Macros". From there you will choose 1M0ake, and then select either the Control-A, Control-D, or Control-F macro. You may enter special characters into your macros, such as those that change colors. For example, to change colors in your macro, you will hit Control-P, followed by a number between 0 and 7. On the screen, it will appear as ^P#. .P EOT EXITING: SOT 2WWIV5Edit0 provides many ways of exiting. The easiest and most familiar way to WWIV users is /ES (or /S) on a blank line. This exits the editor and saves what you have typed. The WWIV command of /ABT also works if you want to abort what you have typed. If you sysop has installed a modification to the WWIV source code, you can also use /ESN and /ESY to save (Non/) Annonymously. [ /S, /SN, and /SY are also properly interpreted ] An alternative to this is to press 2ESC0, wait for the status line to pop up, and then press either 2S0 to 1Save0, or 2A0 to 1Abort0. .P EOT FORMATING: SOT 2WWIV5Edit 0provides a few different formatting commands. The first is the familiar 1/C:0 which will allow you to center whatever follows it. The 1/C: 0must be the first thing on the line in order for it to work properly. An alternative to this is to use 1^C0. To use it, you first type the line that you want centered, and then, on that line, you press 1^C0, and it will center the line (by inserting /C: at the beginning of the line). Paragraph reformatting is done almost completely automatically in 2WWIV5Edit0. 2WWIV5Edit 0keeps track of where you have hit Enter, and uses that information to reformat paragraphs. The only real time that you will ever need to worry about paragraph reformatting is if you want to join two lines (and this is even done automatically sometimes.) In this case, the easiest way to do it is to move to the beginning of the second line, and hit the backspace key, and the line will be joined with the previous line, and the paragraph will be reformatted. 2WWIV5Edit0 also now supports Non-Destructive Backspaces that are popular in many users macros. It can be inserted into text using the ^N key, and will appear as an inverse H on the screen (indicating that it is a control character). It will appear correctly in the message that you are sending, even if it does look a little bit unusual on the screen. .P EOT LOCAL KEYS: SOT 2WWIV5Edit0 provides a number of Local-Only keys. They are: Center Line = Alt-C WWIV Color = Alt-P Insert File = Alt-I Top of Doc = Ctrl-Home or Ctrl-PgUp Bottom of Doc = Ctrl-End or Ctrl-PgDn Word Left = Ctrl-Left Arrow Word Right = Ctrl-Right Arrow Toggle Insert = Insert key Delete Char = Delete Key or Control-Backspace Help = F1 Enter Chat Mode = F10 Abort Post = Alt-A (can be used while a user is on-line) Save and Exit = Alt-S Save and Continue = Alt-W Left Shift-Right Shift = Enter Chat Mode .P EOT LOCAL MACROS: SOT 2WWIV5Edit0 supports virtually unlimited local macros! To use local macros, you 1must0 have the following files in your 2WWIV5Edit0 directory: 1WWIVEDIT.KEY 3-0 Used to translate extended key codes to 3 letter abbreviations. 1MACROS.LCL 3-0 This file contains the actual macros. WWIVEDIT.KEY is NOT a text file and shouldn't need to be modified. MACROS.LCL is a (WWIV) text file that you should edit with 2WWIV5Edit0. There are certain conventions used with this file. 1. A macros is defined using N: and :N delimiters. The exact "N" varies depending on which macro you want to define. The following table shows the names for the macro keys: "A" thru "Z" relate to Alt-A thru Alt-Z "1" thru "0" relate to Alt-1 thru Alt-0 "F1" thru "F0" relate to F1 thru F10 "$F1" thru "$F0" relate to Shift-F1 thru Shift-F10 "^F1" thru "^F0" relate to Control-F1 thru Control-F10 "!F1" thru "!F0" relate to Alt-F1 thru Alt-F10 ^IN and $IN are Control Insert and Shift Insert ^DL and $DL are Control Delete and Shift Delete $TB is Shift Tab HOM is the Home Key END is the End Key UP, RT, LF, and DN are the Arrow keys Up, Right, Left, and Down PU and PD are Page Up and Page Down INS and DEL are the insert and delete keys ^LF and ^RT are Control Left Arrow and Control Right Arrow ^PU and ^PD are Control Page Up and Control Page Down ^HO and ^EN are Control Home and Control End - and = are Alt - and Alt = .P 2. A 1~0 at the beginning of a line is ignored (so that you can use /ES in your macro by putting ~/ES on a line by itself.) 3. A 1~0 at the end of a line means that the next line is part of this line, so: This is a test ~ of this feature. Would actually be equivilent to typing: This is a test of this feature.2 [Enter]0 This is useful if you have a long macro, or, you don't want enter pressed at the end of the macro for some reason. .P Total Number of Macros: A - Z : 26 1 - 0 : 10 F1 - F0 : 10 $F1 - $F0 : 10 ^F1 - ^F0 : 10 !F1 - !F0 : 10 ^IN, $IN, ^DL, $DL, $TB, HOM, END, UP, RT, LF, DN, PU, PD, INS, DEL : 15 ^LF, ^RT, ^PU, ^PD, ^HO, ^EN, -, = : 8 99 Macros Possible. Of course most of the last 23 have bindings already in the LOCAL.DEF, but they are here for completeness. .P EOT GENERAL: SOT 2WWIV5Edit 0Version %VERSION% 2WWIV5Edit0 is the result of 1many 2many 5many0 long hours of work by one person: Adam Caldwell aka 2The Emporer0 1 @16470 [Link] 1 @6470 [Net] Should you require to communicate with me, you should first attempt to send me mail at The First Galactic Empire (1@16470 Link, 1@6470 Net). If you have access to an Internet account, I can be reached as: acaldwel@ohiou.edu If that doesn't work, try acaldwel@oucsace.cs.ohiou.edu 1Note: 0I can not respond to UUCP mail, and its possible I won't even get it. .P If none of those options work for you, you can send mail to: Adam Caldwell 114 Grosvenor St Athens, Ohio 45701 (until June 1993) OR Adam Caldwell 16952 Nash Rd Middlefield, Ohio 44062 or you can call my BBS at 614-593-7836. If you are very desperate, I can be reached by voice at 614-594-3051. Before resorting to a voice call though, PLEASE read the manual. Most problems can be solved by just reading the manual. .P Plea for money: Users, if you are reading this, encourage your sysop to send me money! Sysops: Send me money! See the REGISTER.DOC file that was in the distribution file. This program is BegWare. No registration fee is required, and there are no locked features (although there are some undocumented features) What you see is what you get. If you like this program, please send me a note saying so (at any of the above locations) and some money :) .P Thank You notes: I would like to thank: The Duelist - For getting me involved in WWIV, and Beta testing my editor on his system Parapuke - For Everything Niloc - For Beta testing this editor on my system Filo - For just being part of the who WWIV thing. Wayne Bell - For providing one helluva BBS system Miscellaneous thanx go to: The Warden, Raistlin, Gene Wells, Joe Hallahan, Lance Halle, Aahz, Phantom, Ken, Jim Wire, 8 Ball, and everyone else who sent me comments, suggestions, bug reports, and the like... .P EOT TAG LINES: SOT Tag Lines are an optional feature of 2WWIV5Edit0 that may have been disabled by your sysop. To define a Tag Line, simply press ESC. If 1T2aglines0 appears on the status line, then you can enter a Tag line by pressing 1T0. If it does not appear, then your Sysop has disabled this feature. You should then see on the screen a listing of your currently defined taglines, as well as your choosen method of addition. To define a Tag line, you first press 1M2ake0, and then enter the tag line. Press Control-Z when you are finished entering the Tag line. 2WWIV5Edit 0will then prompt you for the number to save it under. You should press the number of the desired slot, or press 1Q2uit0. Once you have defined all of the Tag Lines that you want, you will next press 1C2hoose0 to choose which method you want to use for appending you Tag Line to your message. They are fairly self explainitory. Just remember to do it. The following are interpreted in a Tag line: ^N : Non-Destructive backspace ^P : WWIV-Color ^C : WWIV-Color ^M : Enter /C: : Center Line ^B : Center Line following ^B .P EOT BLOCK COMMANDS: SOT 2WWIV5Edit0 provides a few "crude" block management commands. These Block commands allow you to Copy/Move/Delete lines in your message. The Block Commands are accessed by first hitting Control-K, and then pressing another letter. The following block commands are available for marking off a block: B : Mark Beginning of Block (hit this on the line of the start of the block) E : Mark End of Block (hit on the line of the End of the block) K : Same as E (for those who use Turbo Pascal) The following commands allow you to manipulate blocks: Y : Delete Block C : Copy Block to current cursor line (which must be outside the block range) M : Move Block to current cursor line V : Same as M .P Please note: 2These block commands only work on 1whole2 lines. They will not work on partial0 2lines.0 They may have also been changed to something else by your sysop. .P EOT CHAT MODE: SOT 2WWIV5Edit0 has a built in two way chat mode that looks very similiar to the two way chat mode of the BBS (except the colors are different). You enter chat mode by pressing both shift keys the local keyboard, and exit by pressing ESC (or F10) on the local keyboard. The Chat Mode has one undesireable side effect. The problem occurs if the user hangs up during the Two-Way chat mode and you are not running WWIV 4.22 or higher. If this happens, and you are not running WWIV 4.22 or higher, you will be forced to reset your computer (using the reset button). .P EOT BBS TAG LINES: SOT 2WWIV5Edit0 can add a BBS Tag line to every message posted with it, if you create a file called BBSxxxxx.TAG. To do this, either type from within the BBS //EDIT 2[Enter]0 WWIVEDIT\BBSxxxxx.TAG 2[Enter]0 or, from DOS level enter 1WWIVEDIT BBS0xxxxx1.TAG0 (from the WWIVEdit directory) and then enter what you would like as you BBS Tag line. 2Notes3:0 1xxxxx0 can be replaced by anything you want. This means that you can create as many BBS*.TAG files as you want, and the 2WWIV5Edit0 will randomly select on of them and attach it to the message. .P EOT INSERTING FILES: SOT To insert a file into your message, you must have a key bound to the INSERT FILE function in the current Key Binding file. By default, it is bound to ALT-I in LOCAL.DEF. .P EOT EXTENDED COMMANDS: SOT A number of Extended commands are now available with 2WWIV5Edit0. The Extended commands are accessed through Control-K and Control-Q. The Block commands are discussed in a different portion of this Help. Here are the extended commands available on ^K: J : Jump to specified line number S : Show block status F : Find specified Text U : Cursor up D : Cursor Down L : Cursor Left R : Cursor Right W : Show Cursor Status [Shows Cursor's Row, Column Coordinates] (Toggle) B : Mark First Line of Block (Block Begin) E or K : Mark Last line of Block (Block End) M or V : Move marked block to current line C : Copy marked block to current line Y : Delete marked block .P Here are the extended commands available on ^Q: F : Find Text L : Repeat last find Y : Delete to end of Line As with the block commands, some or all of these may have been changed by your sysop. .P EOT SLASH COMMANDS: SOT 2WWIV5Edit0 now supports all of the WWIV line editor's "Slash" commands (except /SU) The Available commands are: /ES, /S : Exit & Save /ESY, /SY : Exit & Save, Anonymously if possible. * /ESN, /SN : Exit & Save, Non-Anonymously * /TI : Change Title * /CLR : Clear message and start over /ABT : Abort message /HELP : Same as hitting Control-O /RL : Replace last line /LI : List message /C: : Center everything following it (has to be at the beginning of a line) /CHECK, /SPELL : Invoke spell checker ** * Denotes commands that require a modification to the WWIV Source code (or WWIV 4.21a or above) ** Denote feature unique to 2WWIV5Edit0 .P EOT SYSOP INFORMATION: SOT Thank you for using 2WWIV5Edit0! If you and your users use this Editor, and you would like a larger dictionary file, send $10 to the Author. (Fill out the REGISTER.DOC file included). The following are the Valid command line switches for 2WWIV5Edit3:0 -set: Specifies a setup file to load. If this parameter doesn't appear, 2WWIV5Edit 0will assume 1DEFAULT0 -key: Specifies a keyboard file to load if the users hasn't specified one in the defaults section. If none is specified, 1DEFAULT0 is assumed. .P Files: There are a number of files that are needed for proper operation of WWIVEdit, and a number of files that are optional. Needed files: WWIVEDIT.EXE - For obvious reasons. WWIVEDIT.HLP - The help file for 2WWIV5Edit0. INDEX1 .TAG INDEX2 .TAG USER .TAG - These three files contain all of the information needed by 5 2WWIV5Edit0 to save/reload user taglines. These files are created after the first run of 2WWIV5Edit0. CONFIG\*.DEF - Definition files. CONFIG\*.KEY - Key bindings files. CONFIG\*.SET - Compiled *.DEF files. CONFIG\*.KBD - Compiled *.KEY files. DICT\HASH - A Hash file used to index the dictionary. DICT\WWIVEDIT.DIC - The Dictionary file for 2WWIV5Edit0. .P Optional Files: MACROS .LCL - The local macros file. This is a text file that you can edit with 2WWIV5Edit0 to create "Extended Key" macros. See Local Macros, and the file that came with 2WWIV5Edit0 for more info. WWIVEDIT.KEY - Required if you want to use local macros. This file is used to translate scan codes into 1-3 character abbreviations that are then looked up in MACROS.LCL. BBSxxxxx.TAG - The BBS Tag File(s). 2WWIV5Edit 0will randomly select one of these and append it to the end of the current post. DICT\U###.DIC- User dictionary files .P Sysop Only Display: At the bottom of the screen (on the same line as the Max Lines), there is the Handle and Real Name of the current user. This information does not appear to the user. That information is for the Sysop's reference. If that information does not appear, then 2WWIV5Edit0 is not properly detecting your video card. .P EOT SPECIAL SETUPS: SOT 2WWIV5Edit0 now supports a number of special modifications. The following modifications are currently supported: ------------------------------------------------------------------------------- MCI Commands The xxx Color Modification MS-DOS 5.0 With WWIV 4.12 and Wayne Bells DOS 5 fix ------------------------------------------------------------------------------- If you would like to see others supported, please contact the Author (at any of the addresses listed under General Help). .P 1MCI Commands3:0 2WWIV5Edit0 supports MCI commands through the setup file parameter MCI: [] Currently WWIVEdit only supports MCI commands as defined by Merlin's MCI mod. The format of this parameter is explained in CONFIG.DOC. For now, they will be inserted as an inverted C and the letter of the MCI command. At a later date, they may be implemented as Virtual Text. 1The xxx Color Mod3:0 There are a lot of color mods out there, so I decided to try and support some of them. This required a major re-write of some of the code, but it was worth it, as the code is now a lot more flexible/efficient. To use a color modification, you need to edit your *.DEF files to specify the legal range of colors. See the CONFIG.DOC for further instructions. 2WWIV5Edit0 only supports color mods which use the WWIV format of ^C(char). This means that it is incompatible with some other color mods... I do not intend to support those color modifications. .P 1DOS 5.0 and Wayne Bell's DOS 5.0 Fix3:0 If you are running MS-DOS 5.0, and WWIV 4.12 with Wayne Bell's DOS 5.0 fix, then you need to do the following: Go into COM.C and search for 2ni_stack[100]0, and replace it with 1ni_stack[500]0. Next, search for 2&ni_stack[98]0, and replace it with 1&ni_stack[498]0. Then, go into RETURN.C and repeat the same steps. That will fix 2WWIV5Edit0 and any other full screen editors you may be having problems with. .P EOT TECHNICAL STUFF: SOT 2WWIV5Edit0 is written in Turbo Pascal 6.0 (and will not compile on anything less.) The source code is distributed freely by the Author. In this version, and most likely all future versions, the source code will be distributed in a seperate file called WEDITSxx.ZIP, xx being the version number of the source (This is version %VERSION%). 2 WWIV5Edit0 uses some advanced techniques to tweak some of the little things out of the WWIV. 2WWIV5Edit0 uses special techniques to determine where a message is going. Because there are so many different WWIV setups, it is difficult to tell for ceartain where something is going. Because of this, the Dest Line may sometimes be Incomplete/Non-Descriptive. This is not important as it is displayed only for cosmetic purposes.... It is unimportant to the actual operation of the Editor (well, with the exception of the NOTAG feature). .P EOT SPELL CHECKER: SOT To invoke the spell checker in 2WWIV5Edit0, you simply type /CHECK (or /SPELL) on a blank line. The Spell Checker is fairly self explainatory. Your Sysop may or may not have words which you add to the dictionary going to a common dictionary. Ask him if you are unsure. .P EOT EOF Layout of this file: Keywords : START END LOCAL SOT EOT EOF Formatting: .P ^B ^C .COLORTABLE Anything that lies between two key words is ignored, with the following exceptions: Between START and END is the list of topics that a remote user will see. Between LOCAL and END is an additional list of topics that a local user will see. Between SOT and EOT is a text of the topic preceeding the SOT. A topic is specified using the form: "TOPIC (IN CAPS ONLY):" It is possible to make more than one topic refer to the same thing, although in the new menu based system, that's not needed. Final comments: SOT stands for Start of Text, and EOT stands for End of Text. EOF marks the End of File (or more like end of meaningful text) .P causes the screen to [PAUSE] whenever it occurs in the message text .COLORTABLE causes the Internal Colortable to be displayed ^B (/C: in WWIVEdit) causes a line to be centered ^C (^P - WWIV Color) causes a color change (duh?)