home *** CD-ROM | disk | FTP | other *** search
- //***************************************************************//
-
- FJDT ver 6.30
- Copyright (c) 1999-2005 Fujitsu Limited. All Rights Reserved.
-
-
- //***************************************************************//
-
- January 25, 2005
-
- This file contains immediate information for use with the FJDT ver 6.30
-
- ---------------------
- DISCLAIMER
- ---------------------
-
- The FJDT ver 6.30 is provided "as is" without any
- warranty of any kind, either expressed or implied, including, but not
- limited to, the implied warranties of merchantability and fitness for
- a particular purpose. The entire risk as to the quality and performance
- of the program is with you. In no event will FUJITSU LIMITED or any of
- its subsidiaries be liable to you for any damages, including any general,
- special, incidental or consequential damages arising out of the use or
- inability to use this program ( including but not limited to any loss of
- profit or savings, loss of data or a failure of the program to operate
- with any other programs), even if FUJITSU LIMITED or any of its
- subsidiaries has been advised of the possibility of such damages.
-
-
- _________________________________________________________________________
-
- ---------------------
- Version History
- ---------------------
- Version 1.14 - Date: September 1, 1999
- - Support for PB14 and HN12 models.
-
- Version 1.20 - Date: January 22, 2000
- - Support for PB15/15H drive models.
-
- Version 2.05 - Date: April 28, 2000
- - Support for HN13/13L drive models.
-
- Version 3.00 - Date: July 14, 2000
- - Support for PB16 series drive models.
-
- Version 4.00 - Date: March 5, 2001
- - Support for HN14L drive model.
-
- Version 5.00 - Date: July 31, 2001
- - Support for PB17H/HN15L drive models.
-
- Version 6.01 - Date: May 21, 2002
- - Support for HN16L drive model.
-
- Version 6.10 - Date: Jan 31, 2003
- - Support for HN17L drive model.
-
- Version 6.11 - Date: Jul 17, 2003
- - Fix the following bug.
- When an error occurs during "Media Scan",
- the calculation of the next sector is wrong.
-
- Version 6.20 - Date: Feb 26, 2004
- - Support for V50 drive model.
- - Support for V40 additional model.
-
- Version 6.21 - Date: Jun 29, 2004
- - Added security lock check.
- If the drive is in the security locked mode
- FJDT reports the warning message.
-
- Version 6.22 - Date: July 12, 2004
- - Fix the following bug.
- It cannot examine, even if it inputs a password
- and cancels a lock.
- - Warning message of a security lock check was changed.
-
- Version 6.26 - Date: November 15, 2004
- - Coped with SATA-PATA conversion bridge chip.
- - Support for M40 drive model.
-
- Version 6.30 - Date: January 25, 2005
- - Support for Z60/V60 drive model.
-
- *** IMPORTANT NOTE ***
-
- Program versions other than the ones listed above is considered to
- be an unofficial release or beta version. Please always update your
- copy and use the latest official release/version.
-
- _________________________________________________________________________
-
-
- -------------------
- CONTENTS:
- -------------------
-
- 1) About the program
- 2) File size and build time
- 3) User's Guide ( Note: Please read this part before using the program )
- 4) Test sequences/schedules
- 5) Test results
- 6) Contact Info.
-
- - o - o - o -
-
-
- ---------------------------------------
- 1. ABOUT THE PROGRAM
- ---------------------------------------
- FJDT ver 6.30 is provided for use in checking FUJITSU IDE drives for possible
- defects/problems at the user side.
- This program version only works with the following FUJITSU IDE drive models:
-
- 2.5 inch drives:
- -----------------
- { "FUJITSU M271xT" }
- { "FUJITSU M272xTA" }
- { "FUJITSU MHA20xxAT" }
- { "FUJITSU MHC20xxAT" }
- { "FUJITSU MHD20xxAT" }
- { "FUJITSU MHE20xxAT" }
- { "FUJITSU MHF20xxAT" }
- { "FUJITSU MHG21xxAT" }
- { "FUJITSU MHH20xxAT" }
- { "FUJITSU MHJ2xxxAT" }
- { "FUJITSU MHK2xxxAT" }
- { "FUJITSU MHL2xxxAT" }
- { "FUJITSU MHM2xxxAT" }
- { "FUJITSU MHN2xxxAT" }
- { "FUJITSU MHR2xxxAT" }
- { "FUJITSU MHS2xxxAT" }
- { "FUJITSU MHT2xxxAT" }
- { "FUJITSU MHU2xxxAT" }
- { "FUJITSU MHT2xxxBS" }
- { "FUJITSU MHT2xxxBH" }
- { "FUJITSU MHV2xxxAH" }
- { "FUJITSU MHV2xxxAT" }
-
- 3.5 inch drives:
- -----------------
- { "FUJITSU M16xxTAU" }
- { "FUJITSU MPA3xxxAT" }
- { "FUJITSU MPB30xxATU E" }
- { "FUJITSU MPB30xxAT" }
- { "FUJITSU MPC3xxxAT" }
- { "FUJITSU MPC3065AH" }
- { "FUJITSU MPD3xxxAT" }
- { "FUJITSU MPE3xxxAT" }
- { "FUJITSU MPF3xxxAT" }
- { "FUJITSU MPF3xxxAH" }
- { "FUJITSU MPG3xxxxxxx" }
- { "FUJITSU MPH3xxxAH" }
-
-
- --------------------------------------------
- 2. FILE SIZE and BUILD TIME
- --------------------------------------------
-
- To ensure correct operations, please check if your copy of the
- program conforms with the following specifications:
-
- File Size : 130,168 Bytes
- Build Time : 01-25-05 19:18
-
-
- --------------------------------------------
- 3. USER'S GUIDE
- --------------------------------------------
-
- 3.1. Requirement
-
- a) Operating System : DOS
-
- * This version has only been tested from DOS 5.0 above
-
- b) CPU: IBM-PC compatibles -> 80x86 CPU-Based motherboards
-
-
- 3.2. Running the program
-
- *Note: You cannot run this program under WINDOWS environment.
-
- 3.2.1. Boot from a clean DOS disk.
- 3.2.2. Change to the drive/directory where FJDT.EXE is located.
- 3.2.3. Syntax:
- A> FJDT
-
-
- --------------------------------------------
- 4. TEST SEQUENCES/SCHEDULES
- --------------------------------------------
-
- FJDT ver 6.30 runs the following test sequence on attached or selected
- IDE device.
-
- Note: Comprehensive Test is performed only when the drive passed the Quick Test.
-
- I. Quick Test
-
- a) Pre-SMART Check
-
- b) Buffer Write/Read Test
-
- c) Media Scan for Outer Area (LBA first 150MB)
-
- d) Media Scan for Inner Area (LBA last 50MB)
-
- e) Fundamental Seek Test (Random Seek and Random Read)
-
- f) Post-SMART Check
-
- II. Comprehensive Test
-
- a) Media Scan for All Area
-
- b) Post-SMART Check
-
-
- --------------------------------------------
- 5. TEST RESULTS
- --------------------------------------------
-
- After performing FJDT tests, the program will display PASS or FAIL and result_code.
-
-
- --------------------------------------------
- 6. CONTACT INFO
- --------------------------------------------
-
- For technical support, you may contact your nearest FUJITSU local distributor.
-
-