"Zadan-B² SELECT by prochßzel p°φli╣ mnoho zßznam∙ a trval velmi dlouho. Zkontrolujte tvar WHERE a je-li SELECT v po°ßdku, pou╛ijte SET SQL_BIG_SELECTS=1",
"Nezn-Bßmß chyba",
"Nezn-Bßmß procedura %s",
"Chybn-B² poΦet parametr∙ procedury %s",
"Chybn-BΘ parametry procedury %s",
"Nezn-Bßmß tabulka '%-.64s' v %s",
"Polo-B╛ka '%-.64s' je zadßna dvakrßt",
"Nespr-BßvnΘ pou╛itφ funkce group",
"Tabulka '%-.64s' pou-B╛φvß roz╣φ°enφ, kterΘ v tΘto verzi MySQL nenφ",
"Tabulka mus-Bφ mφt alespo≥ jeden sloupec",
"Tabulka '%-.64s' je pln-Bß",
"Nezn-Bßmß znakovß sada: '%-.64s'",
"P-B°φli╣ mnoho tabulek, MySQL jich m∙╛e mφt v joinu jen %d",
"P-B°φli╣ mnoho polo╛ek",
"-B╪ßdek je p°φli╣ velk². Maximßlnφ velikost °ßdku, nepoΦφtaje polo╛ky blob, je %d. Musφte zm∞nit n∞kterΘ polo╛ky na blob",
"P-B°eteΦenφ zßsobnφku threadu: pou╛ito %ld z %ld. Pou╛ijte 'mysqld -O thread_stack=#' k zadßnφ v∞t╣φho zßsobnφku",
"V OUTER JOIN byl nalezen k-B°φ╛ov² odkaz. Prov∞°te ON podmφnky",
"Sloupec '%-.32s' je pou-B╛it s UNIQUE nebo INDEX, ale nenφ definovßn jako NOT NULL",
"Nemohu vytvo-B°it nov² thread (errno %d). Pokud je je╣t∞ n∞jakß volnß pam∞╗, podφvejte se do manußlu na Φßst o chybßch specifick²ch pro jednotlivΘ operaΦnφ systΘmy",
"Po-BΦet sloupc∙ neodpovφdß poΦtu hodnot na °ßdku %ld",
"Nemohu znovuotev-B°φt tabulku: '%-.64s",
"Neplatn-BΘ u╛itφ hodnoty NULL",
"Regul-Bßrnφ v²raz vrßtil chybu '%-.64s'",
"Pokud nen-Bφ ╛ßdnß GROUP BY klauzule, nenφ dovoleno souΦasnΘ pou╛itφ GROUP polo╛ek (MIN(),MAX(),COUNT()...) s ne GROUP polo╛kami",
"Neexistuje odpov-Bφdajφcφ grant pro u╛ivatele '%-.32s' na stroji '%-.64s'",
"%-.16s p-B°φkaz nep°φstupn² pro u╛ivatele: '%-.32s'@'%-.64s' pro tabulku '%-.64s'",
"%-.16s p-B°φkaz nep°φstupn² pro u╛ivatele: '%-.32s'@'%-.64s' pro sloupec '%-.64s' v tabulce '%-.64s'",
"Neplatn-B² p°φkaz GRANT/REVOKE. Prosφm, p°eΦt∞te si v manußlu, jakß privilegia je mo╛nΘ pou╛φt.",
"Argument p-B°φkazu GRANT u╛ivatel nebo stroj je p°φli╣ dlouh²",
"Tabulka '%-.64s.%s' neexistuje",
"Neexistuje odpov-Bφdajφcφ grant pro u╛ivatele '%-.32s' na stroji '%-.64s' pro tabulku '%-.64s'",
"Pou-B╛it² p°φkaz nenφ v tΘto verzi MySQL povolen",
"Va-B╣e syntaxe je n∞jakß divnß",
"Zpo-B╛d∞n² insert threadu nebyl schopen zφskat po╛adovan² zßmek pro tabulku %-.64s",
"P-B°φli╣ mnoho zpo╛d∞n²ch thread∙",
"Zru-B╣eno spojenφ %ld do databßze: '%-.64s' u╛ivatel: '%-.64s' (%s)",
"The total number of locks exceeds the lock table size",
"Update locks cannot be acquired during a READ UNCOMMITTED transaction",
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Incorrect arguments to %s",
"'%-.32s'@'%-.64s' is not allowed to create new users",
"Incorrect table definition; all MERGE tables must be in the same database",
"Deadlock found when trying to get lock; try restarting transaction",
"The used table type doesn't support FULLTEXT indexes",
"Cannot add foreign key constraint",
"Cannot add or update a child row: a foreign key constraint fails",
"Cannot delete or update a parent row: a foreign key constraint fails",
"Error connecting to master: %-.128s",
"Error running query on master: %-.128s",
"Error when executing command %s: %-.128s",
"Incorrect usage of %s and %s",
"The used SELECT statements have a different number of columns",
"Can't execute the query because you have a conflicting read lock",
"Mixing of transactional and non-transactional tables is disabled",
"Option '%s' used twice in statement",
"User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
"Access denied; you need the %-.128s privilege for this operation",
"Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
"Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
"Variable '%-.64s' doesn't have a default value",
"Variable '%-.64s' can't be set to the value of '%-.64s'",
"Incorrect argument type to variable '%-.64s'",
"Variable '%-.64s' can only be set, not read",
"Incorrect usage/placement of '%s'",
"This version of MySQL doesn't yet support '%s'",
"Got fatal error %d: '%-.128s' from master when reading data from binary log",
"Slave SQL thread ignored the query because of replicate-*-table rules",
"Variable '%-.64s' is a %s variable",
"Incorrect foreign key definition for '%-.64s': %s",
"Key reference and table reference don't match",
"Operand should contain %d column(s)",
"Subquery returns more than 1 row",
"Unknown prepared statement handler (%.*s) given to %s",
"Help database is corrupt or does not exist",
"Cyclic reference on subqueries",
"Converting column '%s' from %s to %s",
"Reference '%-.64s' not supported (%s)",
"Every derived table must have its own alias",
"Select %u was reduced during optimization",
"Table '%-.64s' from one of the SELECTs cannot be used in %-.32s",
"Client does not support authentication protocol requested by server; consider upgrading MySQL client",
"All parts of a SPATIAL index must be NOT NULL",
"COLLATION '%s' is not valid for CHARACTER SET '%s'",
"Slave is already running",
"Slave has already been stopped",
"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
"ZLIB: Not enough memory",
"ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)",
"ZLIB: Input data corrupted",
"%d line(s) were cut by GROUP_CONCAT()",
"Row %ld doesn't contain data for all columns",
"Row %ld was truncated; it contained more data than there were input columns",
"Data truncated; NULL supplied to NOT NULL column '%s' at row %ld",
"Data truncated; out of range for column '%s' at row %ld",
"Data truncated for column '%s' at row %ld",
"Using storage engine %s for table '%s'",
"Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'",
"Can't drop one or more of the requested users",
"Can't revoke all privileges, grant for one or more of the requested users",
"Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'",
"Illegal mix of collations for operation '%s'",
"Variable '%-.64s' is not a variable component (can't be used as XXXX.variable_name)",
"Unknown collation: '%-.64s'",
"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
"Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
"Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
"It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart",
"SQL thread is not to be started so UNTIL options are ignored",
"Incorrect index name '%-.100s'",
"Incorrect catalog name '%-.100s'",
"Query cache failed to set size %lu; new query cache size is %lu",
"Column '%-.64s' cannot be part of FULLTEXT index",
"Unknown key cache '%-.100s'",
"MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work",
"Unknown table engine '%s'",
"'%s' is deprecated; use '%s' instead",
"The target table %-.100s of the %s is not updatable",
"The '%s' feature is disabled; you need MySQL built with '%s' to have it working",
"The MySQL server is running with the %s option so it cannot execute this statement",
"Column '%-.100s' has duplicated value '%-.64s' in %s"
"Truncated incorrect %-.32s value: '%-.128s'"
"Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause"
"Invalid ON UPDATE clause for '%-.64s' column",
"This command is not supported in the prepared statement protocol yet",
"Got error %d '%-.100s' from %s",
"Got temporary error %d '%-.100s' from %s",
"Unknown or incorrect time zone: '%-.64s'",
"Invalid TIMESTAMP value in column '%s' at row %ld",
"Invalid %s character string: '%.64s'",
"Result of %s() was larger than max_allowed_packet (%d) - truncated"
"Can't create a %s from within another stored routine"
"%s %s already exists"
"%s %s does not exist"
"Failed to DROP %s %s"
"Failed to CREATE %s %s"
"%s with no matching label: %s"
"Redefining label %s"
"End-label %s without match"
"Referring to uninitialized variable %s"
"SELECT in a stored procedure must have INTO"
"RETURN is only allowed in a FUNCTION"
"Statements like SELECT, INSERT, UPDATE (and others) are not allowed in a FUNCTION"
"The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been ignored"
"The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN"
"Query execution was interrupted"
"Incorrect number of arguments for %s %s; expected %u, got %u"
"Undefined CONDITION: %s"
"No RETURN found in FUNCTION %s"
"FUNCTION %s ended without RETURN"
"Cursor statement must be a SELECT"
"Cursor SELECT must not have INTO"
"Undefined CURSOR: %s"
"Cursor is already open"
"Cursor is not open"
"Undeclared variable: %s"
"Incorrect number of FETCH variables"
"No data to FETCH"
"Duplicate parameter: %s"
"Duplicate variable: %s"
"Duplicate condition: %s"
"Duplicate cursor: %s"
"Failed to ALTER %s %s"
"Subselect value not supported"
"USE is not allowed in a stored procedure"
"Variable or condition declaration after cursor or handler declaration"
"Cursor declaration after handler declaration"
"Case not found for CASE statement"
"Configuration file '%-.64s' is too big"
"Malformed file type header in file '%-.64s'"
"Unexpected end of file while parsing comment '%-.64s'"
"Error while parsing parameter '%-.64s' (line: '%-.64s')"
"Unexpected end of file while skipping unknown parameter '%-.64s'"
"EXPLAIN/SHOW can not be issued; lacking privileges for underlying table"
"File '%-.64s' has unknown type '%-.64s' in its header"
"'%-.64s.%-.64s' is not %s"
"Column '%-.64s' is not updatable"
"View's SELECT contains a subquery in the FROM clause"
"View's SELECT contains a PROCEDURE clause"
"View's SELECT contains a variable or parameter"
"View's SELECT contains a temporary table '%-.64s'"
"View's SELECT and view's field list have different column counts"
"View merge algorithm can't be used here for now (assumed undefined algorithm)"
"View being update does not have complete key of underlying table in it"
"View '%-.64s.%-.64s' references invalid table(s) or column(s)"
