Beijing Paradise BBS Backup

home *** CD-ROM | disk | FTP | other *** search

/ Beijing Paradise BBS Backup / PARADISE.ISO / software / BBSDOORW / WRB100B.ZIP / WRCONFIG.SYS < prev next >

Wrap

Text File | 1993-01-08 | 35.9 KB | 706 lines

' +--------------------------------------------------------------------+ ' | THIS IS THE CONFIGURATION FILE FOR WR-BBS | ' +--------------------------------------------------------------------+ ' ' +--------------------------------------------------------------------+ ' | This file must be present in the "home" directory as defined by | ' | the DOS or OS/2 environment variable named "WR-BBS". For more | ' | details, read the documentation file WR-BBS.DOC. If you are | ' | using a word processing program to edit this file, make certain | ' | that you save this file as a standard text file (ASCII format) | ' | If you save this file in your word processor's native format, | ' | results will be unpredictable when WR-BBS attempts to read this | ' | file on startup. | ' +--------------------------------------------------------------------+ ' ' +--------------------------------------------------------------------+ ' | CAUTION: Any text in this file that does not comprise a valid | ' | configuration item for WR-BBS must be "REMarked" by starting | ' | the line with REM or a single quote character. If you don't do | ' | this, WR-BBS will attempt to divine configuration information | ' | from the entry and will log errors "INVALID CONFIGURATION DATA" | ' +--------------------------------------------------------------------+ ' ' Once you have configured your WR-BBS system completely and fine-tuned ' its operation, you may wish to delete all of the remark lines (which ' start with [ REM ] or [ ' ]. This will reduce the time it takes for ' WR-BBS to read the configuration file, and speed the startup process. ' ' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ' ++ NOTE: All examples of modem-related settings are for a ++ ' ++ standard (non error correcting) modem, unless otherwise ++ ' ++ specified. ++ ' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ' ' REM ======================================================================== ' ' +------------------------------------------------------------------+ ' | Normally, BADDOOR should be set to "N". Some door programs do | ' | not properly read the DOOR.SYS industry standard file cerated by | ' | WR-BBS. If you are using one of these doors, set BADDOOR=Y and | ' | WR-BBS will write the DOOR.SYS file "wrong" to compensate. See | ' | documentation for more details on this configuration item. | ' +------------------------------------------------------------------+ BADDOOR=N ' ' ' +------------------------------------------------------------------+ ' | Put the name of your BBS here, instead of "TEST BBS". | ' +------------------------------------------------------------------+ ' BBSNAME=TEST BBS ' ' ' +------------------------------------------------------------------+ ' | WR-BBS supports up to 9999 bulletins, numbered from 0000 to 9999 | ' | and with associated file names BULL0001.ASC to BULL9999.ASC, and | ' | BULL0001.ANS to BULL9999.ANS. Chances are, you will not actually | ' | thousands of bulletins. To reduce the time it takes WR-BBS when | ' | checking for updated bulletins, use the entry below to indicate | ' | how many actual bulletins you expect to have. For example, when | ' | BULLETINS=50, WR-BBS will only check for bulletins files having | ' | names of BULL0001.* through BULL0050.*, and not waste any time | ' | searching for the other potential 9950 files. See WRBBS.DOC for | ' | additional information about this setting. | ' +------------------------------------------------------------------+ BULLETINS=16 ' ' ' +------------------------------------------------------------------+ ' | The BUSYLINE= setting determines whthere or not WR-BBS will busy | ' | out the phone line when WR-BBS is not available to accept calls. | ' | | ' | WR-BBS cannot accept calls when a local login is occuring, when | ' | it is shut down from the local console, during events, and while | ' | the modem is recycling after a logoff. If you have a dedicated | ' | telephone line (no phones or other devices connected except for | ' | the WR-BBS modem), then you can set BUSYLINE=Y, and WR-BBS will | ' | take the phone line "off hook" (making it busy to callers) when | ' | WR-BBS cannot accept calls. If WR-BBS shares the phone line with | ' | any phones or other devices, you must set BUSYLINE=N. This will | ' | prevent WR-BBS from disabling the phone line which may be needed | ' | by another phone or device on the same line. When BUSYLINE=N, a | ' | caller (or calling modem) hears ringing when WR-BBS is not able | ' | to accept calls. | ' +------------------------------------------------------------------+ BUSYLINE=N ' ' ' ' +------------------------------------------------------------------+ ' | If you have an older CGA monitor and you see random streaks that | ' | flash when the screen is being updated, set CGA_STOP_SNOW=Y, and | ' | WR-BBS will use the computer's video BIOS (which is much slower) | ' | to write to the screen. Otherwise, set CGA_STOP_SNOW=N, and all | ' | WR-BBS screen updates will be done using a more efficient method | ' | of directly writing to the video adapter's memory. | ' +------------------------------------------------------------------+ CGA_STOP_SNOW=N ' ' ' ' +------------------------------------------------------------------+ ' | The following entries tell WR-BBS what to expect (a result code) | ' | from your modem when a caller connects at various speeds. Upon | ' | establishing a connection, WR-BBS compares the modem's response | ' | to these values, and uses that information to determine the baud | ' | rate at which the caller has connected. | ' | | ' | For any speed which you modem cannot support, enter "IMPOSSIBLE" | ' | (without the quotes) as the result string. This will help avoid | ' | incorrect information due to line noise. | ' +------------------------------------------------------------------+ REM REM Sample settings for a typical 2400 baud (non error correcting) modem REM CONNECT300=CONNECT CONNECT1200=CONNECT 1200 CONNECT2400=CONNECT 2400 CONNECT4800=IMPOSSIBLE CONNECT9600=IMPOSSIBLE CONNECT12000=IMPOSSIBLE CONNECT14400=IMPOSSIBLE CONNECT19200=IMPOSSIBLE CONNECT38400=IMPOSSIBLE CONNECT57600=IMPOSSIBLE ' ' ' ================================================================== ' The following entries are used to configure "doors". A door is an ' optional, external program that a caller can run from your WR-BBS ' system by selecting it from the "Doors Menu". You do not have to ' configure any doors for your WR-BBS system to work properly. This ' feature is optional. There can be up to 26 doors defined, with a ' letter (from A to Z) identifying each one. You can have as few as ' one door, or as many as 26, or none at all - it's up to you, the ' SysOp. For each door you define here in WRCONFIG.SYS, there must ' be a corresponding batch file in the WR-BBS "home" directory. This ' batch file must be named DOOR?.BAT, where "?" is replaced with the ' door's letter designation. For example, a door which is defined ' here as being door "A" must have a corresponding batch file named ' DOORA.BAT, and a door defined as being door "B" must have a batch ' file named DOORB.BAT in the home directory, and so on. You do not ' have to assign the letters in ascending order. For example, it is ' permissible to have three doors with designations of "A", "F", and ' "T", while no definitions exist for the letters in between. Refer ' to the documentation file (WRBBS.DOC) for complete details on the ' configuring of door programs. ' ' For purposes of this file, all you are defining is that the door ' exists, and what Classes Of Service are able to access it. Details ' about what the door actually does, what its name is, and how it is ' launched are handled in the screen file DOORMENU, and in the batch ' file corresponding to each door. For each door you wish to set up, ' put a line in this configruation file which reads: ' ' DOOR=A|ABCDEFGHIJKLMNOPQRSTUVWXYZ ' ' The "DOOR=" part is required. The next character is the letter to ' be associated with that door (A to Z). A pipe character ("|") is ' next, followed by the classes of service (up to 26 of them) to be ' allowed access to that individual door. ' REM DOOR=A|ABCDEFGHIJKLMNOPQRSTUVWXYZ <-- SAMPLE ENTRY REM DOOR=B|XYZ <-- SAMPLE ENTRY ' ' ' ================================================================== ' If you are using an error-correcting modem, enter the string that ' the modem outputs when an error-free connection is established. If ' you do not have an error-correcting modem, you can leave this line ' out of WRCONFIG.SYS, or use "IMPOSSIBLE" for its value. Otherwise, ' enter the exact string, such as /REL, !MNP, etc., that is output ' by your modem when an error-free connection occurs. ' ================================================================== ERRORFREE=/REL ' ' +-----------------------------------------------------------------+ ' | The following entries are for EVENTS that WR-BBS should invoke | ' | automatically at specific times. See documentation for details. | ' | There can be up to sixteen different events defined. The syntax | ' | for the EVENT= entry(s) is: | ' | | ' | 1. The keyword EVENT= | ' | 2. A numeric character (1-7 or 9), representing the day of the | ' | week that this event should occur on. "1" for Sunday, | ' | "2" for Monday, etc. If "9" is used, the event will | ' | run every day of the week. ("8" has no meaning). | ' | 3. A pipe "|" symbol. | ' | 4. The time of day that the event should run, using XX:XX in | ' | twenty four hour (military) format. Include any leading | ' | zeros ... "03:30" is valid, but "3:30" is not. Midnight | ' | is "00:00", not "24:00". | ' | 5. Another pipe "|" symbol. | ' | 6. One (only one) of the following. Either: | ' | A. The full name, including path, of the batch file to | ' | be run when this event executes. | ' | B. A star (*) immedediately followed by a number from | ' | 84 to 99, which indicates the ERRORLEVEL that WR-BBS | ' | should terminate with. | ' +-----------------------------------------------------------------+ REM REM (The remarked EVENT lines shown below are samples only) REM REM EVENT=9|02:00|C:\SAMPLE.BAT REM EVENT=3|17:30|C:\WR-BBS\UTILITYS\DSKMAINT.BAT REM EVENT=6|00:01|*87 ' ' ' +-----------------------------------------------------------------+ ' | The following lines define the file areas in your WR-BBS system | ' | (also known as the files library). Notice that some lines are | ' | longer than 80 characters, and depending on the editor that you | ' | use, it may appear that some of these entries actually take up | ' | two lines. (They don't). The syntax to define a file area is: | ' | | ' | 1. The keyword FILEAREA= | ' | 2. A letter (A to Z) to designate the file area | ' | 3. A pipe "|" symobol | ' | 4. A descriptive name for the file area | ' | 5. Another pipe "|" symbol | ' | 6. The full path for this file area (directory location) | ' | 7. Another pipe "|" symbol | ' | 8. Up to twenty-six letters, each representing a class-of | ' | service that is allowed to access this file area | ' +-----------------------------------------------------------------+ REM REM (The following remarked FILEAREA entries are samples only) REM REM FILEAREA=A|Dos Utilities|C:\DOCSUTILS|ABCDEFGHIJKLMNOPQRSTUVWXYZ REM FILEAREA=B|Games|D:\BBSFILES\GAMES|ADGKMWZ REM FILEAREA=C|New Uploads|C:\NEWFILES|ABCDEFGHIJKLMNOPQRSTUVWXYZ REM FILEAREA=X|John's Non-Public Area|C:\JOHN_DOE|M ' ' ================================================================= ' Size of receive buffer (range 1024 to 32767). This specifies how ' many characters are buffered when the program is too busy to take ' new input from the COM port. For 2400 baud modems and typical PC ' systems, the default value of 2048 is fine. With modem speeds of ' 9600 and higher, a larger buffer (try 8000 or so) provides a good ' compromise between buffer capacity and memory usage. If you use ' a multi-tasker and and a very high speed modem, higher values may ' be necessary to ensure that no characters are lost due to buffer ' overrun while the multi-tasker gives time slices to other program ' resources. (20000 should be the most you would need). ' ================================================================= INBUFFER=2048 ' ' ' ' ' ' +-----------------------------------------------------------------+ ' | The INITBAUD entry specifies the speed (baud) that WR-BBS needs | ' | to use when initializing the modem. For most modems, this is | ' | the same as the modem's maximum operating speed. See INITBAUD= | ' | in the WR-BBS documentation for more details. | ' +-----------------------------------------------------------------+ INITBAUD=2400 ' ' ' ' +-----------------------------------------------------------------+ ' | If you have registered your copy of WR-BBS, use the LICENSEE= | ' | entry to indicate the EXACT name that you used when you applied | ' | for WR-BBS registration. (Does not have to be same as BBSNAME) | ' | Name must be entered exactly, and a valid license code must be | ' | entered with "REGISTRATION=" (below), or WR-BBS will display | ' | "EVALUATION COPY" instead of your name. If you haven't yet reg- | ' | istered your WR-BBS, or you haven't received your license code, | ' | do not put a LICENSEE= entry in WRCONFIG.SYS. | ' +-----------------------------------------------------------------+ LICENSEE=John Q. Sample ' ' ' +-----------------------------------------------------------------+ ' | If you do not have an error correcting modem, leave LOCKDTE set | ' | to "N". Most error correcting modems work with a fixed (locked) | ' | baud rate between the computer and the modem. If you are using | ' | such as modem, set LOCKDTE=Y. The LOCKSPEED entry should then | ' | be set to the desired locked DTE speed. | ' +-----------------------------------------------------------------+ LOCKDTE=N ' ' ' +-----------------------------------------------------------------+ ' | If LOCKDTE=Y, then you also need to tell WR-BBS what speed the | ' | DTE should be locked at. This is usually the modem's maximum | ' | speed. See your modem manual for instructions. If you do not | ' | have an error correcting modem, do not put a LOCKSPEED entry in | ' | WRCONFIG.SYS. | ' +-----------------------------------------------------------------+ LOCKSPEED=2400 ' ' ' ' +-----------------------------------------------------------------+ ' | WR-BBS can alert you to each incoming call by making a 1 second | ' | tone on the computer's speaker. If you want to use this feature | ' | then set LOGONALARM=Y. | ' +-----------------------------------------------------------------+ LOGONALARM=N ' ' ' +-----------------------------------------------------------------+ ' | Set MAXBAUD to the highest speed that your modem can operate at | ' | (regardless of what kind of modem you have). | ' +-----------------------------------------------------------------+ MAXBAUD=2400 ' ' ' +-----------------------------------------------------------------+ ' | There are two keywords, MODEM_INIT_1 and MODEM_INIT_2, which | ' | can be used to define the string of modem commands necessary to | ' | prepare the modem for BBS operation. Each keyword is followed | ' | by an equal sign and up to forty characters that the modem will | ' | recognize as commands. MODEM_INIT_2 is optional, and does not | ' | need to be used unless you can't fit all of the commands within | ' | the MODEM_INIT_1 definition. You should always configure the | ' | MODEM_INIT_1 string. Sample command strings are shown below. | ' | Be sure to read WRBBS.DOC for details on this. | ' +-----------------------------------------------------------------+ REM REM Sample settings for a 2400 MNP5 error correcting modem REM MODEM_INIT_1=AT&C1&D2%C1&D2E1\Q2\N3\J0 REM MODEM_INIT_2=AT\V1V1\A3 S2=255 REM REM Sample settings for a 9600 V32bis high speed fax modem REM MODEM_INIT_1=AT&C1&D2\R3\Q1\A3@256S2=255 REM REM Sample settings for a Hayes SmartModem <tm> 2400 MODEM_INIT_1=ATE1M0Q0V1X4&D1&D2&G0&J0&Q0&R0&S0&T4 MODEM_INIT_2=AT SO=0 S2=255 S7=60 ' ' ' ' ' REM The following pertain to the New User Questionnaire which is REM presented to new callers. See WRBBS.DOC. ' ' Ask new users for their address? ' NEWUSER_ADDRESS1=Y ' ' Allow new users a second line for address? (Y or N) NEWUSER_ADDRESS2=Y ' ' Ask new users for their city and state? NEWUSER_CITY=Y ' ' What class of service should new users be assigned to? (A to Z) NEWUSER_COS=B ' ' Allow new users to enter their data or business phone? (Y or N) NEWUSER_DATAPHONE=Y ' ' Require new users to enter their state or province? NEWUSER_STATE=Y ' ' Require new users to enter their voice phone number? (Y or N) NEWUSER_VOICEPHONE=Y ' ' Require new users to enter their Zip or postal code? ' NEWUSER_ZIPCODE=Y ' ' ' ' ' Size of transmit buffer (range 1024 to 32767) ' Leave this at default setting unless you experience problems. ' OUTBUFFER=2048 ' ' ' ' =================================================================== ' Classes of service that are allowed to overwrite their own previous ' uploads. Callers who have one of these classes of service will be ' permitted to upload an updated version of a file that they uploaded ' previously. If their COS letter does not appear here, no overwrite ' is permitted. If their COS letter DOES appear here, then they can ' overwrite ONLY those files that they themselves previously uploaded ' and no other caller's files. No caller (except the SysOp can over- ' write a file that they did not originally upload, regardless of the ' settings on this line. ' =================================================================== OVERWRITE=ABCDEFGHIJKLMNOPQRSTUVWXYZ ' ' =================================================================== ' Parity check to use (N E O M S) None recommended. Set PARITY=N ' ++++ ' =================================================================== PARITY=N ' ' =================================================================== ' Which COM port is the modem connected to? (1,2,3,4) See WRBBS.DOC ' =================================================================== PORTNUMBER=1 ' ' ' +-----------------------------------------------------------------+ ' | The PROTOCOL= keyword is used to define the external protocols. | ' | WR-BBS does not have any built in file transfer protocols. All | ' | file transfer requests (downloads and uploads) are handled via | ' | an external file transfer program(s) that you provide. You can | ' | obtain file transfer utilities as shareware (or public domain) | ' | from BBS's throughout the world. | ' | | ' | The syntax for PROTOCOL= is as follows: | ' | | ' | 1. The keyword PROTOCOL= | ' | 2. A description of the protocol (which be displayed to the | ' | appropriate callers). | ' | 3. A pipe "|" symbol. | ' | 4. A string that you select, which will be passed to the batch | ' | file WFILEXFR.BAT. This string must be unique for each | ' | protocol, and should be something that is easy to work | ' | with and recognize, such as "XMODEM" for Xmodem. | ' | 5. Another pipe "|" symbol. | ' | 6. A string describing whether the file transfer protocol can | ' | handle multiple files, either "SINGLE" or "BATCH". | ' | 7. Another pipe "|" symbol. | ' | 8. A string of up to 26 letters (A to Z), indicating which COS | ' | (classes of service) can use that protocol. | ' | See the documentation for details. | ' +-----------------------------------------------------------------+ REM These examples are from the WR-BBS Headquarters BBS PROTOCOL=Xmodem (Checksum)|XMODEM_CS|SINGLE|ABCDEFGHIJKLMNOPQRSTUVWXYZ PROTOCOL=Xmodem (CRC)|XMODEMCRC|SINGLE|ABCDEFGHIJKLMNOPQRSTUVWXYZ PROTOCOL=Xmodem (1K)|XMODEM1K|SINGLE|ABCDEFGHIJKLMNOPQRSTUVWXYZ PROTOCOL=Ymodem (Batch)|YMODEM|BATCH|ABCDEFGHIJKLMNOPQRSTUVWXYZ PROTOCOL=Zmodem by DSZ (Batch)|ZMODEM|BATCH|ABCDEFGHIJKLMNOPQRSTUVWXYZ PROTOCOL=Kermit (Single)|KERMIT|SINGLE|ABCDEFGHIJKLMNOPQRSTUVWXYZ ' ' ' ' ' +-----------------------------------------------------------------+ ' | WR-BBS is designed to work with the modem's auto-answer feature | ' | set to off (DISABLED). WR-BBS detects ring from the modem and | ' | then issues the appropriate commands to answer the call. Almost | ' | every modem ever made can properly report the line ringing via | ' | the RS-232 pin 22. Exceptions are some old, cheap internal type | ' | modems, certain laptop modems, external modems with bad cables, | ' | and defective modems. Virtually any "real" modem will properly | ' | signal WR-BBS to an incoming call. You must make sure that the | ' | auto answer feature is disabled, or WR-BBS will not work. Also, | ' | set RINGDETECT=1 which tells WR-BBS to expect ring signals from | ' | the modem. WR-BBS never uses the result code "RING" but instead | ' | uses the more reliable ring detection via the RS-232 hardware. | ' | | ' | If you have one of the few modems that does not properly signal | ' | ringing via the RS-232 hardware, have your modem fixed, or get | ' | a new modem. While you are waiting for a working modem, you can | ' | set RINGDETECT=2, and set the modem to auto answer (either with | ' | an initialization command or hardware switches. See WRBBS.DOC. | ' +-----------------------------------------------------------------+ RINGDETECT=1 ' ' ' ' +-----------------------------------------------------------------+ ' | After you register your copy of WR-BBS, the author will supply | ' | you with an eight character "license code". This will prevent | ' | WR-BBS from displaying "EVALUATION COPY" at various points. | ' | | ' | In order for the license code to work properly, the name that | ' | you enter for LICENSEE= must agree exactly with the name that | ' | was supplied by you on the registration application. | ' | | ' | Using the license code you were supplied, make an entry such as | ' | | ' | REGISTRATION=W0000000 (sample only) | ' +-----------------------------------------------------------------+ REM REGISTRATION=W0000000 ' ' ' ' ' +-----------------------------------------------------------------+ ' | By default, all WR-BBS screen files are kept in the home path | ' | (see WRBBS.DOC for description of home path). You can select a | ' | different directory (optional) for storing the screen files. If | ' | you do, all .ASC and .ANS files must be in the sub-directory as | ' | configured. Use SCREENDIR= to point to that directory. | ' +-----------------------------------------------------------------+ REM SCREENDIR=C:\WR-BBS\SCREENS <-- SAMPLE ' ' ' +-----------------------------------------------------------------+ ' | To help prevent "image burn in" on the CRT, you can enable the | ' | screen saver feature. This puts the WR-BBS "waiting for calls" | ' | display at random locations on the screen, with random colors | ' | and intensities. If SCREENSAVER=N, this feature is disabled. | ' +-----------------------------------------------------------------+ SCREENSAVER=Y ' ' ' ' +-----------------------------------------------------------------+ ' | The SEEKBAUD= configuration item tells WR-BBS what speed should | ' | be used, after answer a call, to start speed negotiations with | ' | the calling modem. Most modems start at their highest possible | ' | speed, and work down to find a speed that both modems can work | ' | with. In this case, set SEEKBAUD= to the modem's maximum speed | ' | (as defined in MAXBAUD=). If you modem needs to use a special | ' | speed for negotiations, enter it instead. | ' +-----------------------------------------------------------------+ SEEKBAUD=2400 ' ' ' ' ' ' +-----------------------------------------------------------------+ ' | After you register your copy of WR-BBS, a serial number will be | ' | assigned to you. Enter it using the SERIALNUMBER= keyword, as | ' | follows: | ' | | ' | SERIALNUMBER=93XXXXX (Sample only) | ' +-----------------------------------------------------------------+ SERIALNUMBER=93_EVAL ' ' ' ' +-----------------------------------------------------------------+ ' | WR-BBS "shells" out to the operating system at various times to | ' | run external file protocols, events, and other configured batch | ' | files such as MIDNIGHT.BAT and WR_AFTER.BAT. To allow maximum | ' | memory for the external program, WR-BBS will swap about 90% of | ' | its memory image out if SHELLSWAP=Y. The swapping will be done | ' | to EMS memory (real fast), if exPANDed memory is available and | ' | if SWAPTOEMS=Y. Otherwise, the WR-BBS image will be swapped to | ' | a disk file. Setting SHELLSWAP=Y is recommended unless you are | ' | using a slow computer with a slow drive and no exPANDed memory. | ' +-----------------------------------------------------------------+ SHELLSWAP=Y ' ' ' =================================================================== ' How many data stop bits? (1 or 2) "1" strongly recommended! ' + ' =================================================================== STOPBITS=1 ' ' ' ' ' +-----------------------------------------------------------------+ ' | If SHELLSWAP=Y, then WR-BBS will swap to EMS (exPANDed) memory | ' | provided there is a sufficient amount of exPANDed memory to use | ' | for the swap. If you have exPANDed memory but wish WR-BBS to | ' | swap to disk instead, set SWAPTOEMS=N. | ' +-----------------------------------------------------------------+ SWAPTOEMS=Y ' ' ' ' ' ' ' +-----------------------------------------------------------------+ ' | Tell WR-BBS who the SysOp is by using the SYSOP= keyword along | ' | with the SysOp's first and last name. This entry must exactly | ' | match the SysOp's logon. For example, if you define the SysOp | ' | with SYSOP=PATRICIA DOE, then log on as "PAT DOE", you will not | ' | be recognized as the SysOp. This entry is required for correct | ' | operation of WR-BBS. | ' +-----------------------------------------------------------------+ SYSOP=JOHN DOE ' ' ' ' ' ' ' +-----------------------------------------------------------------+ ' | There are twenty six different classes of service available for | ' | callers on WR-BBS. Each class of service (COS) can be defined | ' | to allow a specific number of minutes per day. This is done by | ' | assigning a numeric value (from 1 to 999) to each COS, using a | ' | TIMELIMIT= entry. The syntax is: | ' | | ' | 1. The keyword TIMELIMIT= | ' | 2. The letter (A to Z) representing the class of service | ' | 3. A pipe "|" symbol. | ' | 4. A numeric value (1 to 999) - number of minutes per day | ' +-----------------------------------------------------------------+ TIMELIMIT=A|60 TIMELIMIT=B|60 TIMELIMIT=C|90 TIMELIMIT=D|90 TIMELIMIT=E|90 TIMELIMIT=F|90 TIMELIMIT=G|90 TIMELIMIT=H|90 TIMELIMIT=I|90 TIMELIMIT=J|90 TIMELIMIT=K|90 TIMELIMIT=L|90 TIMELIMIT=M|90 TIMELIMIT=N|90 TIMELIMIT=O|90 TIMELIMIT=P|90 TIMELIMIT=Q|90 TIMELIMIT=R|90 TIMELIMIT=S|90 TIMELIMIT=T|90 TIMELIMIT=U|90 TIMELIMIT=V|90 TIMELIMIT=W|90 TIMELIMIT=X|90 TIMELIMIT=Y|90 TIMELIMIT=Z|90 ' ' ' ' ' ' +-----------------------------------------------------------------+ ' | What directory do you wish to have uploaded files put into? You | ' | might want to have a file area (defined with FILEAREA=) for new | ' | uploads whcih will allow callers to download the recent uploads | ' | before you catalog them - in this case, set UPLOADAREA= to that | ' | file area, and make sure that the specified file area (A to Z) | ' | allows all desired COS's to access it. Otherwise, you can hide | ' | new uploads by assigning them to a file area that only you have | ' | access to (a file area with only the SysOp's COS defined). | ' | | ' | UPLOADAREA= must point to a letter (A to Z) of a valid, defined | ' | file area. Use FILEAREA= to define file areas. | ' +-----------------------------------------------------------------+ UPLOADAREA=Z ' ' ' ' ' ' ' +-----------------------------------------------------------------+ ' | In the new user questionnaire, you can tell WR-BBS to refuse to | ' | accept most "bogus" phone numbers by setting VALIDATEPHONE=Y. | ' | When VALIDATEPHONE=Y, if the caller has stated that they are a | ' | resident of Canada or the USA, phone numbers they enter during | ' | the new user questionnaire are screened for validity. If a new | ' | user tries to put in a "wrong" number, they will not be allowed | ' | to continue until they put an acceptable number in. Examples of | ' | "wrong" numbers include: | ' | | ' | - Any number not having format "XXX-XXX-XXXX" | ' | - Numbers with bogus area codes or office codes, such as | ' | "000-555-1212" or "206-019-1234" | ' | - Numbers known to be used for special services, such as | ' | "800-XXX-XXXX", "900-XXX-XXXX", "XXX-555-XXXX" | ' | | ' | Note that international callers are not screened, as non-North | ' | Amercian phone numbers vary widely. | ' +-----------------------------------------------------------------+ VALIDATEPHONE=Y ' ' ' =================================================================== ' Data word length (7,8) 8 recommended. ' =================================================================== WORDLENGTH=8 ' ' ' ' ' ' NOTE: All of the configuration keywords have been listed in ' alphabetical order for your convenience. You are NOT ' required to make your WRCONFIG.SYS file alphabetical ' or follow any order in using the keywords! ' ' ' NOTE: As mentioned at the top of the file, you can trim a ' few seconds off the startup procedure by eliminating ' all lines that begin with a remark symbol ('), or the ' word REM. You should leave the comments in this file ' until you are satisfied that your WR-BBS system has ' been configured properly. Feel free to add your own ' comments, as well. ' ' If any of the configuration lines contain invalid data, WR-BBS will ' pause during startup and warn you about the problem. An entry will ' also appear in the WR-BBS activity log telling you which line had ' the invalid information. ' ' Thank you for using WR-BBS. ' ' For support, please call: The WR-BBS Headquarters BBS (2400/1200) ' (206) 828-9089. If you have questions that are specifically about ' WRCONFIG.SYS, you may wish to upload your current WRCONFIG.SYS to ' the WR-BBS Headquarters BBS. If you do this, please observe: ' ' 1. You may wish to remove unnecessary comments to reduce upload ' time (and long distance time). ' 2. Do not attempt to transmit WRCONFIG.SYS as a text message - ' it is too long for the message system. ' 3. Don't just upload the file - send a message as well.