Beijing Paradise BBS Backup

home *** CD-ROM | disk | FTP | other *** search

/ Beijing Paradise BBS Backup / PARADISE.ISO / software / BBSDOORW / IUSERV05.RAR / ICEUSER.DOC < prev next >

Wrap

Text File | 1995-06-20 | 32.9 KB | 724 lines

▄█▄ ▄███████▄ ▄█████████▄ ▄██▄ ▄██▄ ▄███████▄ ▄█████████▄ ▄████████▄ █████ ████▀ ▀███ ████ ▀▀▀ ████ ████ ████▀ ▀████ ████ ▀▀▀ ███▀ ▀███ █████ ████ ████▄▄▄▄▄ ████ ████ ▀█████▄▄ ████▄▄▄▄▄ ███▄ ▄███ █████ ████ ████▀▀▀▀▀ ████ ████ ▀▀█████▄ ████▀▀▀▀▀ █████████▀ █████ ████▄ ▄███ ████ ▄▄▄ ███████████ ████▄ ▄████ ████ ▄▄▄ ████ ▀████▄ ▀█▀ ▀███████▀ ▀█████████▀ ▀███████▀ ▀███████▀ ▀█████████▀ ▀██▀ ▀██▀ ██ ██ ██ ██ ██ ██ █▌ ██ ██ █▌ ██ ▐▌ ▐▌ ▐▌ ▐▌ ▐▌ ▐▌ ▐▌ ▐ ▐▌ ▐▌ ▐ ▐▌ ▌ ▌ ▐ ▌ ▌ ▐ ▌ ▐ ▐ ───────────────────────────────────────────────────────────────────────────── IceUser v0.50 - CopyRight Jeremy Landvoigt, 1995 - IceUser v0.50 ───────────────────────────────────────────────────────────────────────────── ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Some Of IceUser's Features ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ {+} - Indicates Registered Copies Only. ∙ IceUser is an Online User Editor that is designed for RemoteAccess BBS Software (Version 2.0x). It is designed to be run as a door. {+} Easy To use Validate & Blacklist keys. {+} IceUser allows you to 'lock' up to 12 users, Such as the SysOp, any Co-SysOps, and any other users of special status on the BBS. ∙ IceUser has 3 built in security access levels : SYSOP, COSYSOP, & USER. The Security Levels can be configured in UserCfg.Exe. · SysOp has complete Editing Access in IceUser - all user Statistics can be edited by the SysOp, including 'Locked' Users. · Co-SysOp has complete editing access of all user statistics, except for locked users. · User only has Validate key access. ∙ IceUser will terminate after 5 minutes of inactivity, in order to prevent the user from wasting online time if they have forgotten that they were on your BBS. ∙ Can be used locally and more! ┌───────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Program Information ▓▓▓▒▒▒░░░│ └───────────────────────────────────────────────────────────────────────────┘ IceUser is an online user editor for RemoteAccess. It allows you to edit all facets of your user's profiles. What makes IceUser different is the fact that it focuses on System security. The registered version of IceUser is able to distinguish between 3 different user types: Sysop, CoSysop, and "Normal" (that doesn't mean normal user persay, but those Cosysops who should have very restricted access to the editor). By differentiating these three accesses, your CoSysops can have complete access, limited access, or only the ability to validate new users to predetermined access levels. I imagine there people reading this who use some of my other utils, and are thinking, "Jer, you're really going downhill with this.". :) But in fact, this is TRUELY my first ever utility that I've written. It was written back in 92 or so for RemoteAccess 1.10. One release of it was made under the name of "UserEd!" and than I quietly stuffed it on one of my many shelves. Recently I have been digging through some of this stuff, and decided to renew it as an Ice Utility with some new stuff thrown in. This version is basically to "test the waters" so to speak. If it gets worked over and I get feedback on it, I plan on adding a menu editor component to it. If not, then oh well. ┌───────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Credits ▓▓▓▒▒▒░░░│ └───────────────────────────────────────────────────────────────────────────┘ There are a few people who helped with the development of IceUser that although they weren't involved in the creation or writing of the program, their suggestions, bug reports, and lengthy ßeta testing have been an enormous asset. I would like to thank in no particular order : Ian Thomsen, Danny Dufour, Jim Edwards, & Marc Kulak for all of their help. Couldn't have done it without them! Also, portions of the Fossil Routines used in IceUser v0.50 are Copyright 1993-94 By Tim Strike and Forbidden Knights Systems. ┌───────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Program Configuration - Using UserCfg ▓▓▓▒▒▒░░░│ └───────────────────────────────────────────────────────────────────────────┘ Setting up IceUser is quite easy. This section of the documentation will attempt to take you step by step on how to use the configuration utility UserCfg.Exe to set up IceUser. Most of the options are self explanatory. You can use the local testmode feature at any time to test out how your current settings will affect IceUser.Exe without having to save your settings or exit the configuration program. FILE ------ █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ Save & Exit ▐ ▌ Save Without Exit ▐ ▌ Exit Without Save ▐ ▌ Program Info ▐ ▌ Locked Users ▐ █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█ · Save & Exit - Save current configuration settings and exit the program. · Save Without Exit - Save current configuration settings, but continue configuration process. · Exit Without Save - Exit the program, and ignore any changes to the configuration. · Program Info - Displays program name and version, as well as release date and registration status. · Locked Users - Use this feature to edit users whose profiles are unalterable except by the site administrator. █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ Jeremy Landvoigt···················· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ ▌ ···································· ▐ █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█ Up to twelve users profiles can be protected by this feature. PATHS ------- █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ Userfile Path ▐ ▌ Chat Utility ▐ █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█ · Userfile Path - The full path to your RemoteAccess 2.0x user database. · Chat Utility - The full path and filename of the chat utility of your choice. TOGGLES --------- █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ View Locked Users YES ▐ █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█ · View Locked Users - Should user profiles which have been locked be visible to those with less than administor/sysop access? NAMES ------- █▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ BBS Name ▐ ▌ SysOp Name ▐ █▄▄▄▄▄▄▄▄▄▄▄▄█ · BBS Name - The name of this bulletin board system. · Sysop Name - The name of the SysOp/Site Administrator. COLORS -------- █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ Lines (Light) ▐ ▌ Lines (Dark) ▐ ▌ Header Text ▐ ▌ Header Background ▐ ▌ Punctuation ▐ ▌ Numbers ▐ ▌ Uppercase Letters ▐ ▌ Lowercase Letters ▐ ▌ Highbit ASCii ▐ ▌ Record Information ▐ ▌ Edit Fields ▐ ▌ Default Settings ▐ █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█ · This section on color configuration is self explanatory. Simply select the type of character which you wish to color configure. Another box will appear that will show you the list of available colors. Type in the number of the color you want to use. · DEFAULT SETTINGS will restore all the colors to their original installation settings. OTHER ------- █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ ▌ Editor Password ▐ ▌ SysOp Security ▐ ▌ CoSysOp Security ▐ ▌ Regular Access ▐ ▌ Reprimand Access ▐ ▌ Maximum Access ▐ ▌ Validate Flags ▐ ▌ Blacklist Flags ▐ ▌ Echo Character ▐ █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█ · Editor Password - The password which is required to gain access to the editor. · SysOp Security - Site Administrator's access level. · CoSysOp Security - Co-System Operator access level. · Regular access - Access given to users with the "Validate Key" [+] · Reprimand access - Access given to users with the "Blacklist Key" [+] · Maximum access - The maximum access any user can be given by anyone who has less than SysOp access. [+] · Validate Flags - The flags given to users with the "Validate Key" [+] · Blacklist Flags - The flags given to users with the "Blacklist Key" [+] · Echo character - The character echoed in the editing fields. Please note that the configuration file is not a text file, so you MUST use USERCFG.EXE to configure the program, and the configuration file must be named ICEUSER.CFG. ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ BBS System Files Used ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ IceUser calls upon the following RemoteAccess Files : ExitInfo.Bbs - Read/Write To Exitinfo.BBS, to adjust time limit, read in the User's Name, Location, baudrate etc.. Users.Bbs - Read/Write To the UserFile. This file contains most of your user's information. Dorinfo1.Def - Read in user Information. Files IceUser will create are : ICEUSER.CFG - The configuration file ICEUSER.LOG - IceUser Usage Log ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Executing IceUser - Main Program ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ Please read the section of this document entitled 'Setting Up IceUser Using UserCfg.Exe' BEFORE attempting to install IceUser into RA. Failure to setup IceUser correctly before installing it into your bbs program will probably result in IceUser failing to run or not running as expected. In order to run IceUser.Exe, you must have a fossil driver active. A fossil driver such as BNU should work fine with IceUser. If you don't have a fossil driver installed, a simple error message will be displayed, and the program will stop. A fossil is not required when running in local mode. We will now run through EVERYTHING you need to do in order to get IceUser to run in your RemoteAccess setup. 1. Extract all the files in the distribution archive to a directory of your choice. C:\RA\IceUser is recommended and is assumed to be the directory you are using from now on. 2. To help IceUser find it's configuration files, you need to define an environment variable for it in this manner in your AutoExec.Bat : SET IUSER={PATH TO ICEUSER DIRECTORY} PLEASE NOTE, THE ENVIRONMENT VARIABLE NAME IS IUSER - NOT ICEUSER !! The environment variable is used by IceUser to find its system files and configuration. Failure to setup the environment variable can result in IceUser failing to run correctly - YOU HAVE BEEN WARNED! Please see your DOS manual for more information on environment variables. N.B. You will need to reboot your machine after entering the environment variable for it to take effect. 3. Run UserCfg.Exe and configure all of IceUser's options as explained earlier in this document. You MUST configure IceUser for it to work correctly! Refer to the section of this document for setting up IceUser. 4. You will now need to edit your .MNU files to include IceUser. IceUser can be run using either a type 7 or a type 15 menu command. A type 15 menu will require a batch file that is called to execute IceUser, a type 7 menu only needs to have the command line to execute IceUser on the Optional data line of the menu. See your BBS manual for more information on type 7 and type 15 menus... Decide which type of menu command (Type 7 or type 15) you wish to use and then do ONE of the following depending on which menu type you have chosen to use: Type 7 Menu Command: Optional Data: <command line> [control codes] Description: This function will run an external program, or door in a shell while the user is on-line. Example command lines for Type 7 usage: Calling IceUser in either a single line or multiline system you would use: Single Line: C:\RA\IceUser\IceUser.Exe -d:C:\bbs\ra *M Multi Line : C:\RA\IceUser\IceUser.Exe -d:C:\bbs\ra\line*N *M The following RA parameters are used in the above examples: *M Activate the MemorySwap feature. RemoteAccess attempts to swap itself and all the memory it occupies to XMS and EMS memory (if available) or to disk, leaving only 3KB resident. This is ideal when running memory-hungry programs but takes a few seconds longer in order to perform the swap. If the swap cannot be accomplished, RemoteAccess will attempt to load the program in a normal shell. *N The current node number, as specified by the -N command line parameter when RemoteAccess was loaded. Type 15 Menu Command: Exit to DOS with errorlevel Optional data: <errorlevel> Description: This function causes RemoteAccess to exit to DOS completely, returning an errorlevel to your BBS batch file. The optional data field should contain the errorlevel that you wish to pass to the batch file. The batch file should trap the errorlevel and act accordingly. If you use this exit while the user is still on- line, the user may be logged back into RemoteAccess using the command line parameter -R. This forces RemoteAccess to read the EXITINFO.BBS file that was written at the time of the exit so that it can restore system and user information, presenting the user with the TOP menu. NOTE: Errorlevels 0 through 5 are reserved for internal use by RemoteAccess. For a complete description of these internal errorlevels and how they are used, see the Errorlevels section of the Reference chapter. If you decide to use a Type 15 menu to call IceUser you will need to add IceUser into your BBS batchfile and call IceUser with the errorlevel you have chosen. :START IF ERRORLEVEL 10 GOTO ICEUSER IF ERRORLEVEL 5 GOTO NET&ECHO IF ERRORLEVEL 4 GOTO ECHOMAIL IF ERRORLEVEL 3 GOTO NETMAIL IF ERRORLEVEL 0 GOTO START_UP GOTO START_UP :IceUser CD\RA\IceUser IceUser.EXE <Don't forget IceUser's Parameters!> RA -R GOTO AFTER_BBS In this example, a TYPE 15 menu command with an Errorlevel of 10 will make the batch file execute the command following the :IceUser label. Include the line "RA -R" to return to the board after the external programs have been executed. N.B. DO NOT FORGET to include the correct command line switches for IceUser in your batchfile. Failure to do so will result in IceUser not functioning as it is intended. See the section of this doc file for more info on IceUsers parameters. 5. Make sure you have changed ALL of the menus you wish to call IceUser from and that you have saved the changes. These are only an example to get you going... Please refer to the section of these docs about 'parameters' to ensure you have the correct command line to execute IceUser. 6. When you run IceUser, be sure that the IceUser.Cfg file has been created. If it has not, then you MUST run UserCfg.Exe. If you don't, and attempt to run IceUser.Exe directly, IceUser will display an error message that IceUser.Cfg doesn't exist. That's all there is to it.... The following is a list of valid parameters for IceUser. -L : Execute IceUser in a local test mode. -D:[PATH] : Where [PATH] is the full path to your BBS dropfiles. -N:[NODE] : Where [NODE] is your current node number. Once you have successfully executed the main program, you will be put into the main editing screen, which looks like this: ┌──────────────────────────────────────────────────────────────────────────────┐ │ IceUser v0.50 [Evaluation] CopyRight (C) 1995 Jeremy Landvoigt │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [A] User Name : System Operator Record # : 0 Status : LOCKED │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [B] Password : Not Visible [N] Uploads : 0 │ │ [C] Security : 65000 [O] Downloads : 0 │ │ [D] DataPhone : 555-555-1234 [P] Uploads K : 0 │ │ [E] HomePhone : 555-555-1234 [Q] Downloads K : 0 │ │ [F] Location : NowheresVille, Earth [R] Last Msg Read : 0 │ │ [G] Messages : 0 [S] Today's K's : 0 │ │ [H] Credits : 0 [T] Last Time : 00:00 │ │ [I] Time Used : 0 [U] Screen Length : 24 │ │ [J] Last Date : 06-09-95 [V] No. Of Calls : 0 │ │ [K] Birthday : 00-00-00 [W] Expiry Date : - - │ │ [L] Alias : SysOp │ │ [M] Comment : │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [>] Next User [<] Previous User [#] Goto User No. [!] Find User │ │ [$] Reset Screen [^] Other Options [=] Validate [*] BlackList │ └──────────────────────────────────────────────────────────────────────────────┘ In EVALUATION mode, almost all settings can be altered by any user who has access to the editor, however in REGISTERED mode the following happens: i) Those with SysOp access can edit all settings. ii) Those with Co-SysOp access can edit all settings except those users who are locked. In addition, Co-Sysops cannot upgrade someone's access level (including their own) to anything higher than the maximum level defined by the SysOp. iii) Those with "User" access can only use the validate key to upgrade accounts to a previously defined level. These rules apply to all editing screens. The additional editing screens follow: ┌──────────────────────────────────────────────────────────────────────────────┐ │ IceUser v0.50 [Evaluation] CopyRight (C) 1995 Jeremy Landvoigt │ ├──────────────────────────────────────────────────────────────────────────────┤ │ User Name : System Operator Record # : 0 Status : LOCKED │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [A] -A- Flags : -------- [L] ANSI : YES │ │ [B] -B- Flags : -------- [M] Clear Scrn : YES │ │ [C] -C- Flags : -------- [N] MORE Prompt : YES │ │ [D] -D- Flags : -------- [O] Deleted : NO │ │ [E] No-Kill : YES [P] Avatar : NO │ │ [F] Xfer Priority : YES [Q] Hidden : YES │ │ [G] FS ANSi Editor : YES [R] FS Msg Viewer : YES │ │ [H] Quiet Mode : NO [S] Hot Keys : YES │ │ [I] Page Priority : NO [T] Guest Account : NO │ │ [J] Echomail Off : NO [U] Post Bill : NO │ │ [K] Sex : Male │ │ [1] Organization : │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [>] Next User [<] Previous User [#] Change User # [!] Find User │ │ [$] Reset Screen [^] Other Options │ └──────────────────────────────────────────────────────────────────────────────┘ and screen three: ┌──────────────────────────────────────────────────────────────────────────────┐ │ IceUser v0.50 [Evaluation] CopyRight (C) 1995 Jeremy Landvoigt │ ├──────────────────────────────────────────────────────────────────────────────┤ │ User Name : System Operator Record # : 0 Status : LOCKED │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [1] Address #1 : 100 Some St. │ │ [2] Address #2 : NowheresVille, Earth │ │ [3] Address #3 : X1X 1X1 │ │ [A] Forward To : │ │ [B] Pending : 0 [J] File Group : 0 │ │ [C] Pwd Change : 0 [K] Msg Group : 0 │ │ [D] Group : 0 [L] Last DOB : 0 │ │ [E] Language : 0 [M] First Date : 00-00-00 │ │ [F] Date Format: 0 │ │ [G] Msg Area : 0 │ │ [H] File Area : 0 │ │ [I] Protocol : @ │ ├──────────────────────────────────────────────────────────────────────────────┤ │ [>] Next User [<] Previous User [#] Change User # [!] Find User │ │ [$] Reset Screen [^] Other Options │ └──────────────────────────────────────────────────────────────────────────────┘ You can easily manoeuvre around the editing screens by hitting the key which corresponds with the field you wish to edit. Use > and < to move forwards and backwards through the user file, # to jump to another record number, ! to find a user (searches include Name, Alias, Location, Phone NO.), $ to redraw the screen and ^ to move to the different editing pages. ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Registration ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ The Development of IceUser v0.50 took many long hours, and alot of time and effort not to mention money. This program is not FreeWare. If this program satisfies your expections of a User Editing utility, if not MORE, than you are expected to register it after an evaluation period of 30 days or sooner. By doing this you can be sure of continued development of the software. Thanks for your support. This Program may be freely distributed but DO NOT under any circumstances change any of the executables or alter any files that come with this. I urge you to register as soon as you can! The more registrations that I have will show the interest of people in the program, and I will release a newer version with a lot more features. If you register, the IceUser Validate & Blacklist keys become available, IceUser will become sensitive to the SysOp's defined security levels. Also, all "Unregistered" messages and almost inaudible beeps within the program will be removed. Please note that the status of features (whether they are available or not to unregistered users) may be changed without further warning in later versions of the software; but this does not mean that they will be changed. If you wish to register, please fill out the registration form : North America ------------- Register.Can - Registration Form For Canadian Users Register.Usa - For the U.S.A, and for all other Registrations Europe ------ Register.Nl - Registration Form For The Netherlands Register.Ger - Registration Form For Germany Register.Uk - Registration Form For UK/Eire **Note: The Australian registration site is currently unavailable. If you are in the area where you would normally contact this site, please contact one of the other registration sites instead. Please at this time send ALL registrations to the address listed in the correct registration form. Thank you for your support. Any Registration forms that have invalid or missing information may be considered void and not be processed, depending on the extent of the errors. Due to recent events, I have changed my policy on personal cheques that are sent in to pay for registration. I will continue to honour them, however as of this release, there will be a 3 week hold placed on the cheque to ENSURE that it does NOT go N.S.F. Although most people are honest about this, lately too many people have sent in N.S.F. cheques, and when contacted about them, show little or no concern about them or the financial difficulties they may have caused. Additionally, a service of $10 will be levied against any N.S.F. cheques. Until both the full payment, and the service charge is recieved in the form of a MONEY ORDER, the registration will not be processed. In conclusion to the above information, to ensure a speedy turnaround time it is recommended you send your registration in the form of a money order (or direct deposit for Canadian residents) If you do choose to send in a personal cheque, it means that you have read and understood these conditions. ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Archive Format ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ IceUser v0.50 has been compressed using RAR. The archive should be approximately 80k in size. This archive should have an authenticity verification seal by Jeremy Landvoigt. If this archive is not in RAR format, or if the seal has been broken, it is may be advisable to get a new archive from one of the support sites listed at the end of the documentation. The IceUser archive should contain the following files : ICEUSER.EXE - The Main Program USERCFG.EXE - Use to configure the program ICEUSER.DOC - Program Documentation REGISTER.CAN - Registration Form For Canadian Users REGISTER.UK - For United Kingdom registrations REGISTER.NL - For Netherlands registrations REGISTER.GER - For German registrations REGISTER.USA - For All Other Registrations If one or any combination of these files are missing, or files have been ADDED, then you are using a possibly modified or altered copy of IceUser. It would be advised that you delete this copy, and get a clean copy of IceUser from one of the BBS's listed at the end of the documentation. Newest Version of IceUser can be F'REQed from Ice Technologies BBS under the magic name 'IceUser' (Without the quotes) ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ CopyRight Notice & Program Disclaimer ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ The door IceUser, along with all its support files and documents, are Copyright (C) 1995 by Jeremy Landvoigt. Distributing a version AFTER it has been registered is prohibited; distribution of the original, unaltered version is permitted, indeed encouraged, as long as all support-files and documentation accompany the program WITHOUT ALTERATION OF ANY SORT. The author can be quickly reached for information through the RA_UTIL international FidoNET Conference . If you wish to trust comments/complaints/suggestions to the Post Office, you can send them to: Jeremy Landvoigt 100 Burling Place Newmarket, Ontario L3Y - 5W4 Canada THE USUAL LEGALITIES I (the author of this door) make no warranty of any kind, expressed or implied, including without limitation any warranties of merchantability and/or fitness for a particular purpose. I shall not be held liable for any damages, whether direct, indirect, special or consequential arising from the failure of this program to operate in the manner desired by the user. I shall not be held liable for any damage to data or property which may be caused directly or indirectly by the use of this program. In no event will I be held liable for any damages, including (but not limited to) any lost profits, lost savings, or other incidental or consequential damages arising out of the use -- or the inability to use -- this program, or for any claim by any other party. The only thing this program is guaranteed to do is take up space on your Harddrive. ┌────────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Other IceSoft Utilities ▓▓▓▒▒▒░░░│ └────────────────────────────────────────────────────────────────────────────┘ Here is a list of all the IceSoft utilities that were available at the time of release of this archive. If you enjoy using this IceSoft utility, you may want to check some of these out! :) · IceChat - IceChat is a split screen chat utility for RemoteAccess BBS packages. It can be used with many other BBS types as long as they support Dorinfo1.Def/Door.Sys type Doors. · IceEdit - IceEdit is a fullscreen ANSi message editor that was originally designed for use with RemoteAccess. Although it has only been tested with RemoteAccess v2.0x, and TeleGard v2.7 it should be compatible with any other BBS that uses the QuickBBS style dropfiles that contain the message writing information. These files are MSGTMP & MSGINF. You should check your BBS documentation to see if your software supports this system. IceEdit also calls on the Dorinfo1.Def file to read in necessary information about the user profile. · IceNote - IceNote is one of the newest IceSoft doors available. It is a message to all users type door with many neat features. It has been tested with both RemoteAccess v2.0x, and the latest release of Renegade, and should work with any other Dorinfo1.Def compatible BBS Packages. · IceBank - IceBank is the very newest IceSoft utility available. It is a fully functional, fully configurable timebank system for RemoteAccess v2.0x. It has many cool features, including InterBBS transactions. ┌───────────────────────────────────────────────────────────────────────────┐ │░░░▒▒▒▓▓▓ Program Support - BBS Locations ▓▓▓▒▒▒░░░│ └───────────────────────────────────────────────────────────────────────────┘ IceUser can be File Requested from any of the following BBS's under the magic name of ICEUSER. Legend ────── S - Support Site B - Beta Site R - Registration Site D - Distrib. Site Ice Technologies Concession Stand Minerva Online Ltd. Ontario, Canada Florida, USA London, England (905) 895-7775 (407) 569-6568 +44-(0)181-402-3350 FidoNET 1:250/912 FidoNET 1:374/6568 FidoNET 2:254/33 Max. Baud: 14400 Max. Baud: 28800 Max. Baud: 28800 Flags: S B R D Flags: S B D Flags: S D R The Modem Link Slash BBS Heidelburg, Germany The Netherlands +49-6221-390239 +31-4780-10920 FidoNET 2:2468/6022 FidoNET 2:512/67 Max. Baud: 19200 Max. Baud 28800 Flags: S B R D Flags: S R D [EOF]