home *** CD-ROM | disk | FTP | other *** search
- --------------------------------------------------------------------------
- Setup hints for using BGFAX with GT Power 18.00, Class 2 modems 09-14-93
- B.J. Guillot
- FidoNet 1:106/400 InterNet: bjg90783@jetson.uh.edu
- --------------------------------------------------------------------------
-
- Keep in mind that fax commands cannot be stored in NVRAM.
-
- GT.BAT should contain something similar to ...
-
- @echo off
- c:
- cd\gt
- set gtpath=c:\gt
- echo AT+FLID="713 555 1212" > com1
- gt1800 host.scr *aaaa-bbbb
-
- There isn't enough room in the host initialization string for your fax
- identity, so it's best just to put it in the batch file that runs GT.
-
- Here is the relevant information from GT's <ALT>-<I> configuration screen:
-
- Miscellaneous Options -> Host Mode Initialization String
- AT+FCR=1;+FDCC=1,5,0,2,0,0,0,0|
-
- Miscellaenous Options -> Host Mode Answer String
- AT+FAA=1;A|
-
- Also, you will need to edit the "fax token" in the SYSOP.BBS file depending
- on what type of modem you have.
-
- Line 355 of the SYSOP.BBS file contains
- "AX"
-
- The fax token cannot start with the first character on a response returned
- by the modem, so "AX" is to be used for modems, like the Supra, that return
- the "FAX" result code.
-
- If you are using a modem such as the PPI FXMT, make the fax token
- "FCON"
-
- GT_FAX.BAT can contain the following for "FAX" modems:
-
- bgfax /fax c:\bgfax 1 z
-
- GT_FAX.BAT can contain one of the following for "+FCON" modems:
-
- bgfax /fcon c:\bgfax 1 z
- OR
- bgfax /fast c:\bgfax 1 z
-
- --------------------------------------------------------------------------
-
- Regards,
- B.J. Guillot
-
-