PC Online 1998 September

home *** CD-ROM | disk | FTP | other *** search

/ PC Online 1998 September / PCO_0998.ISO / filesbbs / os2 / tg2309g2.arj / INSTALL.DOC < prev next >

Wrap

Text File | 1998-07-05 | 16.5 KB | 333 lines

Telegard Bulletin Board Software, v3.10 Installation Documentation Copyright (C) 1995,1998 by Tim Strike All Rights Reserved. INTRODUCTION Welcome to Telegard Bulletin Board Software, version 3.10. This documentation contains quick instructions for installing Telegard for the first time, or for completing an upgrade from previous versions of the Telegard software. Please read README.DOC before continuing with this installation. Please follow these instructions very carefully. The steps we have outlined are designed to ensure that you install our system with minimal effort and with success the FIRST time! If you are upgrading from a previous version of Telegard, you should refer to the section titled "UPGRADE INSTRUCTIONS", otherwise if you are a first time user of Telegard, please follow the "NEW INSTALLATION" section. SYSTEM REQUIREMENTS DOS (Telegard): Memory 440K minimum Diskspace, installation 2 megs post-installation 1 meg + msgs + files + doors + data recommended 10+ megs at least Fossil Driver (level 5) Share/OS-equivalent (for multinode) OS/2 (Telegard/2): Memory 440K minimum Diskspace, installation 2 megs post-installation 1 meg + msgs + files + doors + data recommended 10+ megs at least SIO/compatible communications driver TELEGARD/2 INSTALLATION NOTES Please note that this document references only DOS installation files; the Telegard/2 installation is identical, except please note the following: INSTALL2.TWS replaces INSTALL.TWS INSTALL2.EXE replaces INSTALL.EXE TG2.EXE replaces TELEGARD.EXE ; both DOS and OS/2 utilities are included in Telegard/2 UPDATE2.EXE may be used in place of UPDATE.EXE UNPACK2.EXE may be used in place of UNPACK.EXE MAKLANG2.EXE may be used in place of MAKELANG.EXE FA2FB2.EXE may be used in place of FA2FB.EXE FB2FA2.EXE may be used in place of FB2FA.EXE INDEX2.EXE may be used in place of INDEX.EXE No other changes to the installation process are required. NEW INSTALLATION 1) Create a new directory for your Telegard BBS 2) Copy INSTALL.* into your bbs directory 3) Run INSTALL.EXE from your bbs directory. When prompted, enter the case-sensitive unarchiving password 'READYTOGO'. This will extract the remaining installation files for your system. 4) Run TELEGARD.EXE from your bbs directory, which will start the installation process. It will ask you a few simple questions regarding the placement of the remaining data files. For security reasons, you should consider configuring these directories in such a manner that the directory structure is not obvious (i.e. do not use /DATA/ as your data directory). The installation process will build the desired directory structure, unpack the enclosed data files, and create any other data files which are needed for BBS installation. In addition, the installation process will attempt to build and compile your index and language files automatically (errors will be noted; if errors exist, you can run the command line utilities instead). 5) Run "TELEGARD -?" to familiarize yourself with the commands available from the command line. 6) Run "TELEGARD -L" to load the BBS locally -- Hit "ESC" for the menu commands available -- Use the System Configuration and System Manager commands to setup the remainder of your BBS system (remember to change the information in the first user record to your OWN personal information!). 7) You may delete INSTALL.EXE and *.TWS after the installation has been completed. These files are only temporary installation files and are not used in the general operation of the BBS. You should save a copy of the original archive (TG_nnn@n.ZIP) in case you want or need to reinstall the software at a later date. You can also delete the UPDATE.EXE file, which is only used if updating from a previous version of Telegard. 8) Remember to read /docs/faq.doc at some point in the near future. NOTE: You will need to install a fossil driver before you can use Telegard remotely (for Telegard/2, you will need a SIO compatible communications driver). A fossil or communications driver should likely be available on a local BBS. UPGRADING INSTRUCTIONS We don't have any upgrade instructions for any versions of Telegard prior to 3.02. If you are upgrading from Telegard 2.7, or from one of the (expired) gamma releases (2.99.x), or old final releases (3.0/3.01), then please get the TG_302.ZIP package and update your system to 3.02 before continuing the upgrade to 3.10. TELEGARD 3.09 GAMMA 1 UPGRADING INSTRUCTIONS If you are still using 3.02, you may upgrade by following the 3.02 instructions found later in this document. 1) Make a backup of your BBS configuration/data files (your data, language, menu and text folders), your file section data files (*.FB?, *.FSI) and your message section data files (*.MSI), and the main Telegard executables. A thorough backup is your best defense. 2) Copy INSTALL.* into your bbs directory 3) Run INSTALL.EXE from your bbs directory. When prompted, enter the case-sensitive unarchiving password 'READYTOGO'. This will extract the remaining installation files for your system. 4) Create a folder (directory) off your main BBS directory called /docs/. You can remove /notes/ at your leisure. 5) You should then run UNPACK for each of the .TWS files in order to update the data files that are in use on the system. To do this type "UNPACK <filename> <location>" at the DOS command prompt, without the quotes, replacing <filename> with the .TWS filename and <location> with the directory for the unpacking. Say NO to extract new/non-existant files. You want to replace some files which already exist; saying NO will ensure that you can do that. For existing files, UNPACK lists current (C=xx) and new (N=xx) file dates for comparison. If the file dates are different, then the line is highlighted in YELLOW. If you say YES to overwrite the file, the NEW file (the one in the .TWS archive) will be extracted over the current file. NOTE: The file in the archive is not necessarily newer then the file on disk. Files which have not changed from 3.02 are listed with a file time of 3:02a. FILENAME LOCATION OVERWRITE? docs.tws /docs/ directory yes defaults.tws data directory yes*1 language.tws languages directory yes*2 bin.tws main bbs directory yes bin2.tws main bbs directory yes*3 text.tws default text directory no*4 menus.tws default menus directory no*5 *1 overwrite TELEGARD.* files, MENUS.DAT and HARDWARE.DAT files. *2 overwrite ENGLISH.TXT if you desire (this will wipe out any changes that you did to your language file) *3 Telegard/2 installation only *4 several of the scripts have changed, as have some of the standard text files; you might want to update these as you desire (replace DOORFILE.SCR, for instance) *5 several of the menus have changed cosmetically, only the new menus are required 6) Completely review /docs/WHATSNEW.G2 for all changes, and then return to these installation instructions. 7) Run UPDATE.EXE from the main BBS directory. Select version 3.09.g1 (option 8) and the let the utility update your data files--which will update new fields, create new files, and convert old files to their new format. In case of error, restore from your backup, report the error and abort the upgrade {for now}. 8) Run "INDEX BUILD ALL" to update and correct your files. 9) Review /docs/LANGUAGE.G2 for instructions on updating your language files. Remember to update -all- your languages. If you replaced your language with the default ENGLISH.TXT in step 5 and you only use ENGLISH, you are already done. 10) From your main bbs directory run "MAKELANG .\LANGUAGE\ENGLISH" to compile your new language file (Note: Replace \LANGUAGE\ with your correct language path). Repeat as neccessary for each of your remaining languages. 11) Review the new configuration options to ensure that your system is setup the way that you desire. For more information on these options, refer to /docs/WHATSNEW.G2. 12) You may delete INSTALL.EXE and *.TWS after the upgrade has been completed, and UPDATE.EXE after it has been run (step 6). 13) Remember to read /docs/FAQ.DOC at some point in the near future. TELEGARD 3.02 RELEASE UPGRADING INSTRUCTIONS 1) Make a backup of your BBS configuration/data files (your data, language, menu and text folders), your file section data files (*.FB?, *.FSI) and your message section data files (*.MSI), and the main Telegard executables. A thorough backup is your best defense. 2) Copy INSTALL.* into your bbs directory 3) Run INSTALL.EXE from your bbs directory. When prompted, enter the case-sensitive unarchiving password 'READYTOGO'. This will extract the remaining installation files for your system. 4) Create a folder (directory) off your main BBS directory called /docs/. You can remove /notes/ at your leisure. 5) You should then run UNPACK for each of the .TWS files in order to update the data files that are in use on the system. To do this type "UNPACK <filename> <location>" at the DOS command prompt, without the quotes, replacing <filename> with the .TWS filename and <location> with the directory for the unpacking. Say NO to extract new/non-existant files. You want to replace some files which already exist; saying NO will ensure that you can do that. For existing files, UNPACK lists current (C=xx) and new (N=xx) file dates for comparison. If the file dates are different, then the line is highlighted in YELLOW. If you say YES to overwrite the file, the NEW file (the one in the .TWS archive) will be extracted over the current file. NOTE: The file in the archive is not necessarily newer then the file on disk. Files which have not changed from 3.02 are listed with a file time of 3:02a. FILENAME LOCATION OVERWRITE? docs.tws /docs/ directory yes defaults.tws data directory yes*1 language.tws languages directory yes*2 bin.tws main bbs directory yes bin2.tws main bbs directory yes*3 text.tws default text directory no*4 menus.tws default menus directory no*5 *1 overwrite TELEGARD.* files, MENUS.DAT and HARDWARE.DAT files. *2 overwrite ENGLISH.TXT if you desire (this will wipe out any changes that you did to your language file) *3 Telegard/2 installation only *4 several of the scripts have changed, as have some of the standard text files; you might want to update these as you desire (replace DOORFILE.SCR, for instance) *5 several of the menus have changed cosmetically, only the new menus are required 6) Completely review /docs/WHATSNEW.* for all changes, and then return to these installation instructions. 7) Run UPDATE.EXE from the main BBS directory. Select version 3.02 and the let the utility update your data files--which will update new fields, create new files, and convert old files to their new format. In case of error, restore from your backup, report the error and abort the upgrade {for now}. A disk cache is extremely helpful in the upgrade process, which may take anywhere from several seconds to many minutes, depending on how many message and file areas, and how many users you have, how big your history file is, etc. Please be patient, the update utility will inform you have it's progress. 8) Run FB2FA.EXE from the main BBS directory to convert your old file section to the new file section. This will take several minutes as well. 9) Run "INDEX BUILD ALL" to update your files and to create the new index formats (QFILES.IDX, among others). 10) Review /docs/LANGUAGE.G1 and /docs/LANGUAGE.G2 for instructions on updating your language files. Remember to update -all- your languages. If you replaced your language with the default ENGLISH.TXT in step 5 and you only use ENGLISH, you are done. 11) From your main bbs directory run "MAKELANG .\LANGUAGE\ENGLISH" to compile your new language file (Note: Replace \LANGUAGE\ with your correct language path). Repeat as neccessary for each of your remaining languages. 12) Several new menus were added in step 5: NEWUSERV, MSGREAD, FILETAGP, WFCQFILE, WFCQMSG. Review these menus as you see fit- I do not suggest any changes until you have updated your entire system and it has been running in a stable environment for a few days. 13) Update your ACS strings (menus, msg & file areas, access control items in msg & file configuration) to reflect the new Ixxx ACS (which changed from I00-nnnn to Innnn). If you have doors which still expect the old format, then use I00-~UU instead of just ~UU. Please read OTHER section of /docs/WHATSNEW.G1 for further information. 14) DOOR.SYS file format was changed; your doors will not likely work correctly if they use the DOOR.SYS format. You have to edit your users' door records to reflect their real name instead of handle in the door configuration, or you must use the OLDDOORS script. YOU HAVE BEEN WARNED! Please read DOORS section of /docs/WHATSNEW.G1 for further information. 15) Review the new configuration options to ensure that your system is setup the way that you desire. For more information on these options, refer to /docs/WHATSNEW.G1 and /docs/WHATSNEW.G2. 16) You may delete INSTALL.* and *.TWS after the upgrade has been completed, and UPDATE.EXE after it has been run (step 6). 17) Remember to read /docs/FAQ.DOC at some point in the near future.