home *** CD-ROM | disk | FTP | other *** search
-
- ΓòÉΓòÉΓòÉ 1. Button:Dial/Hang ΓòÉΓòÉΓòÉ
-
- When not connected, this button allows you to dial the entry currently
- selected.
-
- When connected, this button allows you to hang up on the currently connected
- session.
-
-
- ΓòÉΓòÉΓòÉ 1.1. Button:Add ΓòÉΓòÉΓòÉ
-
- This button allows one to add a new dial entry. You will be placed in the
- notebook settings to fill in all appropriate information for this entry.
-
-
- ΓòÉΓòÉΓòÉ 1.2. Button:Edit ΓòÉΓòÉΓòÉ
-
- This button allows one to edit the setup pages of the currently selected entry.
- Editting an entry during or after dialing will have no effect until the dialing
- sequence is completed.
-
-
- ΓòÉΓòÉΓòÉ 1.3. Button:Delete ΓòÉΓòÉΓòÉ
-
- This button allows one to delete the currently selected entry from the entry
- list. You will be prompted to confirm a deletion to prevent any accidental
- loss.
-
-
- ΓòÉΓòÉΓòÉ 1.4. Button:Config ΓòÉΓòÉΓòÉ
-
- This button allows one to edit the configurable toggles of the program.
-
- 1. Configure
-
-
- ΓòÉΓòÉΓòÉ 1.5. Button:Exit ΓòÉΓòÉΓòÉ
-
- This button will exit the program and disconnect from any connect that may be
- active.
-
-
- ΓòÉΓòÉΓòÉ 1.6. Toggle:Disable AutoStarts ΓòÉΓòÉΓòÉ
-
- This toggle allows you to temporarily disable any AutoStart programs you have
- configured from running when a connection is established. This is
- automatically flagged after the AutoStart programs have been initially started.
-
-
- ΓòÉΓòÉΓòÉ 1.7. Toggle:Debug Mode ΓòÉΓòÉΓòÉ
-
- This toggle allows you to turn on debug mode. Debug mode is used to aid in the
- tracking of PPP/SLIP configuration errors. More information will be displayed
- in the status window during a dial.
-
-
- ΓòÉΓòÉΓòÉ 1.8. Toggle:Allow Disconnect ΓòÉΓòÉΓòÉ
-
- If you have the configured toggle 'Reconnect on Disconnect', 'Redial', or
- 'Redial on Error' turned on, this toggle will override it and force the dialer
- to stay disconnected after the current dial sequence.
-
-
- ΓòÉΓòÉΓòÉ 1.9. Button:CPS ΓòÉΓòÉΓòÉ
-
- If closed, this button will open the CPS stats window. If opened, this button
- will close it. Window positions are saved.
-
-
- ΓòÉΓòÉΓòÉ 1.10. Button:Bytes ΓòÉΓòÉΓòÉ
-
- If closed, this button will open the Bytes stats window. If opened, this
- button will close it. Window positions are saved.
-
-
- ΓòÉΓòÉΓòÉ 1.11. Button:Time ΓòÉΓòÉΓòÉ
-
- If closed, this button will open the Total and Session Online Time stats
- window. If opened, this button will close it. Window positions are saved.
-
-
- ΓòÉΓòÉΓòÉ 1.12. Normal Mode/FullSize ΓòÉΓòÉΓòÉ
-
- When in condensed mode this button will toggle back to the main window
- interface.
-
-
- ΓòÉΓòÉΓòÉ 1.13. Condensed Mode ΓòÉΓòÉΓòÉ
-
- This option toggles on Condensed Mode. When in condensed mode a much smaller
- window interface will be used to conserve desktop space.
-
-
- ΓòÉΓòÉΓòÉ 1.14. ListBox:Providers ΓòÉΓòÉΓòÉ
-
- This listbox contains names, login ID's and provider names. Selecting an entry
- will cause the phone numbers to be displayed in the phone numbers listbox
- unless you are currently dialing/connected. Clicking the RMB (Right Mouse
- Button) will bring up a popup menu for convience.
-
-
- ΓòÉΓòÉΓòÉ 1.15. ListBox:Phone Numbers ΓòÉΓòÉΓòÉ
-
- The phone numbers listbox contains a list of all phone numbers that were
- entered in the settings notebook. If no numbers are selected, when dialing,
- all numbers will be scrolled through in order before returning to the
- beginning. Optionally, you can select specific numbers from the list to dial,
- and only those will be scrolled through. Choosing numbers to use can be done
- at any time, including during the dial sequence.
-
-
- ΓòÉΓòÉΓòÉ 1.16. ListBox:Status ΓòÉΓòÉΓòÉ
-
- The status listbox contains an echoed listing of the text that the PPP/SLIP
- programs normally output. Choosing debug mode can increase the detail of the
- information that is provided.
-
-
- ΓòÉΓòÉΓòÉ 2. Setup Pages ΓòÉΓòÉΓòÉ
-
- 1. Page 1: Login Info
- 2. Page 2: Connect Info
- 3. Page 3: Server Info
- 4. Page 4: Modem Info
- 5. Page 5: AutoStart Info
-
-
- ΓòÉΓòÉΓòÉ 2.1. Page 1:Login Info ΓòÉΓòÉΓòÉ
-
- 1. ISP Name
- 2. Description
- 3. Login ID
- 4. Password
- 5. Phone Numbers
- 6. Login Sequence
- 7. Timeout
- 8. SLIP or PPP
-
-
- ΓòÉΓòÉΓòÉ 2.1.1. ISP Name ΓòÉΓòÉΓòÉ
-
- Specify a name for this entry. The name must be unique (the name is case
- sensitive, so "Name" and "NAME" are different).
-
- Example: IBM
-
- Note: This is a required entry field. To ensure backwards compatibility with
- the default IBM dialer, names are limited to 8 characters.
-
-
- ΓòÉΓòÉΓòÉ 2.1.2. Description ΓòÉΓòÉΓòÉ
-
- Optionally specify a short description of this entry. Typically, this would be
- the name of your Internet provider.
-
- Example: Advantis
-
- Note: This is a required entry field.
-
-
- ΓòÉΓòÉΓòÉ 2.1.3. Login ID ΓòÉΓòÉΓòÉ
-
- Specify the login user identification assigned to you. Your internet service
- provider should supply this information.
-
- Note: This is a required entry field if using an empty login sequence. Refer
- to that section for more information.
-
-
- ΓòÉΓòÉΓòÉ 2.1.4. Password ΓòÉΓòÉΓòÉ
-
- Specify the password associated with your login identification. Your internet
- service provider should supply this information.
-
- Note: This is a required entry field if using an empty login sequence. Refer
- to that section for more information.
-
-
- ΓòÉΓòÉΓòÉ 2.1.5. Phone Numbers ΓòÉΓòÉΓòÉ
-
- Specify the phone number(s) used to access your service provider. Be sure to
- include any long distance area codes if necessary. Phone numbers need to be
- separated with an <enter> keystroke.
-
- Your service provider should provide this information for you.
-
-
- ΓòÉΓòÉΓòÉ 2.1.6. Login Sequence ΓòÉΓòÉΓòÉ
-
- To allow for maximum configurability there are five ways in which one can
- complete this field.
-
- o NONE: The reserved word NONE will indicate that a login sequence is not
- necessary. Protocol linking will begin upon modem connection.
-
- o EMPTY: iLink/2 will input your Login ID and Password from the above entry
- fields when it detects the following prompts:
-
- login:
- password:
-
- o
-
- o LOGIN SEQUENCE: By enterning a series of strings in the waitfor/send
- sequence, a simplified login script can be created. Click here for more
- information and examples.
-
- o ASCII Response Script: Specifying the path/filename of an ASCII response file
- will run this script upon connection to automate your login sequence. Click
- here for more information and examples.
-
- o REXX Script: Specifying the path/filename of a REXX script will run this
- script upon connection to automate your login sequence. Click here for more
- information and examples.
-
-
- ΓòÉΓòÉΓòÉ 2.1.6.1. Login Sequence Information ΓòÉΓòÉΓòÉ
-
- A login sequence works in a standard 'waitfor this' 'send this' format. For
- example:
-
- \r
- ogin:
- [LOGIN]
- assword:
- [PASSWORD]
- type:
- ppp
-
- In the above example, the first thing sent upon connect will be a carrier
- return (\r). Once that has been sent, a 'ogin:' prompt will activate the
- sending of your login name. The special entry [LOGIN] is automatically
- replaced by your login name. Once that has been sent, a 'assword:' string will
- activate the sending of your password. The special entry [PASSWORD] is
- automatically replaced by your password. Finally, once the string 'type:' is
- received, 'ppp' will automatically be sent to start the ppp session.
-
-
- ΓòÉΓòÉΓòÉ 2.1.6.2. ASCII Response File Information ΓòÉΓòÉΓòÉ
-
- A response file is very similar to the Login sequence. Simply place the path
- and filename of the response file in the login sequence entry box to use a
- response file. Examples of response files can be found in your /tcpip/etc
- directory, and usually have an *.RSP extension.
-
-
- ΓòÉΓòÉΓòÉ 2.1.6.3. REXX Script Information ΓòÉΓòÉΓòÉ
-
- A REXX script can be used to automate the login procedure. Examples can be
- found in your /tcpip/etc directory, and usually have an *.CMD extension.
-
-
- ΓòÉΓòÉΓòÉ 2.1.7. Timeout ΓòÉΓòÉΓòÉ
-
- If the option is set to a value other than OFF, iLink/2 will automatically
- terminate a connect after this many minutes of inactivity.
-
- Note: Using the automatic timeout conflicts with the "Reconnect on Disconnect"
- feature. It is recommended that only one of the two options be used at
- any time.
-
-
- ΓòÉΓòÉΓòÉ 2.1.8. SLIP or PPP ΓòÉΓòÉΓòÉ
-
- Select the radio button that reflects the protocol you wish to use for this
- connection. The protocol must match that of the host connection.
-
- CSLIP is the Compressed Serial Line Internet Protocol (Check SLIP and turn ON
- VJ Compression)
-
- SLIP is the Serial Line Internet Protocol
-
- PPP is the Point-To-Point Protocol
-
- Note: This information should be supplied by your provider.
-
-
- ΓòÉΓòÉΓòÉ 2.2. Page 2:Connect Info ΓòÉΓòÉΓòÉ
-
- 1. Your IP Address
- 2. Destination IP Address
- 3. Netmask
- 4. MTU/MRU Size
- 5. VJ Compression
- 6. Domain Nameserver
- 7. Your Host Name
- 8. Your Domain Name
-
-
- ΓòÉΓòÉΓòÉ 2.2.1. Your IP Address ΓòÉΓòÉΓòÉ
-
- Specify your 32-bit dotted decimal notation Internet Protocol address.
-
- Note: This information should be supplied by your provider if you have a
- static IP address
-
- This field isn't used if you use a REXX script in your login sequence.
-
-
- ΓòÉΓòÉΓòÉ 2.2.2. Destination IP Address ΓòÉΓòÉΓòÉ
-
- Specify the 32-bit dotted decimal notation Internet Protocol address of the
- destination host to which you want to connect. This is sometimes referred to
- as the Gateway Address.
-
- Note: This information should be supplied by your provider.
-
- This field is NOT used if you use a REXX script in your login sequence.
-
-
- ΓòÉΓòÉΓòÉ 2.2.3. Netmask ΓòÉΓòÉΓòÉ
-
- Specify the 32-bit dotted decimal notation network mask (subnet) used to
- indicate which portion of your IP address represents the network address, and
- which represents the host address. 255.255.255.0 is common.
-
- Note: This information should be supplied by your provider.
-
- This field is NOT used if you use a REXX script in your login sequence.
-
-
- ΓòÉΓòÉΓòÉ 2.2.4. MTU/MRU Size ΓòÉΓòÉΓòÉ
-
- If you are using SLIP, this entry will specify the Maximum Transmission Unit
- (MTU) size.
-
- If you are using PPP, this entry will specify the Maximum Response Unit (MRU)
- size.
-
- This number indicates the largest possible unit of data that can be sent on a
- given medium in a single frame.
-
- The regular value for SLIP is 1006, while for PPP it is 1500.
-
- Note: This information should be supplied by your provider. This is a
- required entry field.
-
-
- ΓòÉΓòÉΓòÉ 2.2.5. VJ Compression ΓòÉΓòÉΓòÉ
-
- Van Jacobson (VJ) packet header compression must be set to the same value on
- both ends of a connection or connection problems will occur. Only check this
- box if the host provider supports VJ compression.
-
- Note: This information should be supplied by your provider.
-
-
- ΓòÉΓòÉΓòÉ 2.2.6. Domain Nameserver ΓòÉΓòÉΓòÉ
-
- Specify the 32-bit dotted decimal notation Internet Protocol (IP) address of
- the server that resolves host names to IP addresses.
-
- Note: This information should be supplied by your provider. This is a
- required entry field.
-
-
- ΓòÉΓòÉΓòÉ 2.2.7. Your Host Name ΓòÉΓòÉΓòÉ
-
- Specify the symbolic name assigned to your computer.
-
- Note: This information should be supplied by your provider.
-
-
- ΓòÉΓòÉΓòÉ 2.2.8. Your Domain Name ΓòÉΓòÉΓòÉ
-
- Specify the name of the domain in which your computer resides. The domain name
- includes all subdomains and the root domain seperated by periods.
-
- Note: This information should be supplied by your provider. This is a
- required entry field.
-
-
- ΓòÉΓòÉΓòÉ 2.3. Page 3:Server Info ΓòÉΓòÉΓòÉ
-
- 1. News Server
- 2. Gopher Server
- 3. WWW Server
- 4. Mail Gateway
- 5. POP Mail Server
- 6. Reply Domain
- 7. Reply (mail) Domain
- 8. POP Login ID
- 9. POP Password
-
-
- ΓòÉΓòÉΓòÉ 2.3.1. News Server ΓòÉΓòÉΓòÉ
-
- Specify the hostname or 32-bit dotted decimal notation Internet Protocol
- address of your default news server.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.2. Gopher Server ΓòÉΓòÉΓòÉ
-
- Specify the hostname or 32-bit dotted decimal notation Internet Protocol
- address of your default gopher server.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.3. WWW Server ΓòÉΓòÉΓòÉ
-
- Specify the hostname or 32-bit dotted decimal notation Internet Protocol
- address of your default www server.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.4. Mail Gateway ΓòÉΓòÉΓòÉ
-
- A mail gateway routes mail to the recipients. If your connection is via LAN,
- this field is optional. If your network uses a mail gateway, enter its
- hostname here. If your connection is through a service provider, the mail
- gateway host name is assigned by your provider.
-
- This entry can NOT be a 32-bit dotted decimal notation IP address. The POP
- Mail Server will be used as a default.
-
- Note: This information should be supplied by your provider if one is used.
-
-
- ΓòÉΓòÉΓòÉ 2.3.5. POP Mail Server ΓòÉΓòÉΓòÉ
-
- Specify the host name of your default mail server. If you are given a POP mail
- box, specify its hostname in this field.
-
- This entry can NOT be a 32-bit dotted decimal notation IP address.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.6. Reply Domain ΓòÉΓòÉΓòÉ
-
- Specify the name of the domain in which your mail server resides. This domain
- name should include all subdomains and the root domain separated by periods.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.7. Reply (Mail) ID ΓòÉΓòÉΓòÉ
-
- Specify the name assigned to you for use in sending and receiving email. If
- using a service provider, this usually is the same as your main login name.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.8. POP Login ID ΓòÉΓòÉΓòÉ
-
- Specify the login name/ID assigned to you for accessing the mail server.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.3.9. POP Password ΓòÉΓòÉΓòÉ
-
- Specify the password assigned to you for accessing the mail server.
-
- Note: This information should be supplied by your provider
-
-
- ΓòÉΓòÉΓòÉ 2.4. Page 4:Modem Info ΓòÉΓòÉΓòÉ
-
- 1. Modem Type
- 2. Com Port
- 3. Speed (bps)
- 4. Data Bits
- 5. Parity
- 6. Prefix
- 7. Initialization String 1
- 8. Initialization String 2
- 9. Call Waiting
- 10. Disable Sequence
-
-
- ΓòÉΓòÉΓòÉ 2.4.1. Modem Type ΓòÉΓòÉΓòÉ
-
- Specify the type of modem you are using.
-
-
- ΓòÉΓòÉΓòÉ 2.4.2. Com Port ΓòÉΓòÉΓòÉ
-
- Specify the name of the communications/serial port of your computer to which
- your modem is attached.
-
-
- ΓòÉΓòÉΓòÉ 2.4.3. Speed (bps) ΓòÉΓòÉΓòÉ
-
- Specify the speed of the connection. This may be equal to or less than the
- capacity of your modem.
-
- Note: This information should be supplied by your provider.
-
-
- ΓòÉΓòÉΓòÉ 2.4.4. Data Bits ΓòÉΓòÉΓòÉ
-
- Specify the number of data bits in each character sent or received. The usual
- value is 8.
-
- Note: This information should be supplied by your provider.
-
-
- ΓòÉΓòÉΓòÉ 2.4.5. Parity ΓòÉΓòÉΓòÉ
-
- Specify the parity of the connection. A parity bit is added to a group of
- binary digits to cause the sum of the digits to be either even or odd. This
- parity bit is used in paritiy checking, and must match the setting of the host
- modem.
-
- Possible values are none, space, mark, even, and odd. The default is NONE.
-
- Note: This information should be supplied by your provider.
-
-
- ΓòÉΓòÉΓòÉ 2.4.6. Prefix ΓòÉΓòÉΓòÉ
-
- Specify the dial prefix for your modem. This is the attention command string
- that precedes the phone number. The default is ATDT.
-
- Note: This information should be supplied by your modem documentation.
-
-
- ΓòÉΓòÉΓòÉ 2.4.7. Initialization String 1 ΓòÉΓòÉΓòÉ
-
- Specify the initialization string used by your modem. This is the set of
- attention commands that initiates the modem.
-
- Note: This information should be supplied by your modem documentation.
-
-
- ΓòÉΓòÉΓòÉ 2.4.8. Initialization String 2 ΓòÉΓòÉΓòÉ
-
- Specify the initialization string used by your modem. This is the set of
- attention commands that initiates the modem. This field allows you to specify
- a second set of commands that might not have fit on a single initialization
- entry line.
-
- Note: This information should be supplied by your modem documentation
-
-
- ΓòÉΓòÉΓòÉ 2.4.9. Disable Call Waiting ΓòÉΓòÉΓòÉ
-
- If your phone service includes call waiting, and you wish to disable it during
- modem use, you can toggle the usage of a disable sequence here. Check this box
- if you wish to disable call waiting.
-
-
- ΓòÉΓòÉΓòÉ 2.4.10. Disable Sequence ΓòÉΓòÉΓòÉ
-
- If you have chosen to disable call waiting, specify the phone key sequence used
- to disable the service here.
-
- Note: This information should be supplied by your telephone company/phone
- book.
-
-
- ΓòÉΓòÉΓòÉ 2.5. Page 5:AutoStart Info ΓòÉΓòÉΓòÉ
-
- 1. Program Titles
- 2. Program Filename
- 3. Program Arguments
- 4. Program Path
- 5. Program Title
- 6. Start Up Options
- 7. Program Type
-
-
- ΓòÉΓòÉΓòÉ 2.5.1. Program Titles ΓòÉΓòÉΓòÉ
-
- This box displays all the program titles you have set to autostart. You can
- scroll through this list and choose a program title to edit or delete.
-
-
- ΓòÉΓòÉΓòÉ 2.5.2. Program Filename ΓòÉΓòÉΓòÉ
-
- Specify the program executable filename here. Do NOT include the path.
-
-
- ΓòÉΓòÉΓòÉ 2.5.3. Program Arguments ΓòÉΓòÉΓòÉ
-
- Specify any command line arguements for the program filename here.
-
-
- ΓòÉΓòÉΓòÉ 2.5.4. Program Path ΓòÉΓòÉΓòÉ
-
- Specify the full path of the program filename here. This field will be
- combined with the executable filename to properly run the program.
-
-
- ΓòÉΓòÉΓòÉ 2.5.5. Program Title ΓòÉΓòÉΓòÉ
-
- Specify a program title for this entry.
-
-
- ΓòÉΓòÉΓòÉ 2.5.6. Start Up Options ΓòÉΓòÉΓòÉ
-
- Specify if you want the prorgram to be Maximized or Minimized upon startup.
-
-
- ΓòÉΓòÉΓòÉ 2.5.7. Program Type ΓòÉΓòÉΓòÉ
-
- Specify the program type. A program is either a Windowed, Fullscreen or PM
- program. DOS or Windows autostarts are not supported at this time.
-
-
- ΓòÉΓòÉΓòÉ 3. Configuration ΓòÉΓòÉΓòÉ
-
- 1. Redial
- 2. Reconnect on Disconnect
- 3. Use Condensed Window
- 4. Start Minimized
- 5. Confirm on Hangup
- 6. Confirm on Exit
- 7. Redial on Error
- 8. Beep on Connect
- 9. Minimize on Connect
- 10. Open CPS Window on Connect
- 11. Open Bytes Window on Connect
- 12. Open Time Window on Connect
-
-
- ΓòÉΓòÉΓòÉ 3.1. Redial ΓòÉΓòÉΓòÉ
-
- This option allows you to specify whether or not you wish the dialer to redial.
- You can also specifiy the number of times the dialer will redial.
-
-
- ΓòÉΓòÉΓòÉ 3.2. Reconnect on Disconnect ΓòÉΓòÉΓòÉ
-
- If this option is checked, the dialer will automatically reconnect if your
- connect is ever lost.
-
-
- ΓòÉΓòÉΓòÉ 3.3. Use Condensed Window ΓòÉΓòÉΓòÉ
-
- If this option is checked the Condensed window will be used as a default.
-
-
- ΓòÉΓòÉΓòÉ 3.4. Start Minimized ΓòÉΓòÉΓòÉ
-
- If this option is checked, iLink/2 will open as a minimized program.
-
-
- ΓòÉΓòÉΓòÉ 3.5. Confirm on Hangup ΓòÉΓòÉΓòÉ
-
- If this option is checked you will be prompted with a Yes/No option window when
- you choose to hangup.
-
-
- ΓòÉΓòÉΓòÉ 3.6. Confirm on Exit ΓòÉΓòÉΓòÉ
-
- If this option is checked you will be prompted with a Yes/No option window when
- you choose to exit iLink/2.
-
-
- ΓòÉΓòÉΓòÉ 3.7. Redial on Error ΓòÉΓòÉΓòÉ
-
- If this option is checked the dialer will attempt to redial even if it
- encouters an error.
-
-
- ΓòÉΓòÉΓòÉ 3.8. Beep on Connect ΓòÉΓòÉΓòÉ
-
- If this option is checked you will be notified by a set of beeps that a
- connection has been established.
-
-
- ΓòÉΓòÉΓòÉ 3.9. Minimize on Connect ΓòÉΓòÉΓòÉ
-
- If this option is checked iLink/2 will minimize itself when a connection is
- established.
-
-
- ΓòÉΓòÉΓòÉ 3.10. Open CPS Window on Connect ΓòÉΓòÉΓòÉ
-
- If this option is checked the CPS Status Window will be automatically opened
- when a connection is established.
-
-
- ΓòÉΓòÉΓòÉ 3.11. Open Bytes Window on Connect ΓòÉΓòÉΓòÉ
-
- If this option is checked the Bytes Status Window will be automatically opened
- when a connection is established.
-
-
- ΓòÉΓòÉΓòÉ 3.12. Open Time Window on Connect ΓòÉΓòÉΓòÉ
-
- If this option is checked the Time Status Window will be automatically opened
- when a connection is established.
-
-
- ΓòÉΓòÉΓòÉ 4. Status Windows ΓòÉΓòÉΓòÉ
-
- Three status windows can be used to track online information.
-
- The CPS (Characters Per Second) window displays Current CPS, Peak CPS (the
- highest CPS achieved during this connect) and Average CPS (an ongoing average
- based upon your session connect time).
-
- The BYTES window displays the total number of bytes that have been sent
- (Outgoing) and received (Incoming) for this session.
-
- The TIME window displays both your Total Online Time used for all connections
- with the specific entry to which you are connected, as well as Session Online
- Time to dispaly how long your current connection has been active.
-
- These windows can be moved around the desktop by holding the LMB (Left Mouse
- Button) down while dragging any part of the window. A small pop up menu will
- appear if you click with your RMB (Right Mouse Button) anywhere on the window.
- This menu allows you to close the window, or reset the values of the window.
-
-
- ΓòÉΓòÉΓòÉ 5. iLink/2 General Help ΓòÉΓòÉΓòÉ
-
- o Configuration
-
- o Login Info
-
- o Connect Info
-
- o Server Info
-
- o Modem Info
-
- o Autostarts Info
-
- o Status Windows
-
-
- ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
-
- A 32-bit dotted decimal consists of four 8bit numbers written as a decimal
- separated by periods.
-
- Example: 127.0.0.1