home *** CD-ROM | disk | FTP | other *** search
- #
- | README file for
- |
- | ELSA VCAPI 0.10 for OS/2 WARP
- | Version 0.10
- |
- | Copyright (c) 1993-97 ELSA GmbH, Aachen (Germany)
- |
- | Subsidiary:
- | ELSA GmbH ELSA Inc.
- | Sonnenweg 11 2150 Trade Zone Blvd.
- | D-52070 Aachen Suite 101
- | Germany San Jose, CA 95131
- | USA
- |
- | Phone : +49-241-9177-0 Phone: +1-408-935-0350
- | Support Fax: +49-241-9177-113 Phone: 1-800-272-ELSA
- | BBS (modem): +49-241-9177-981 Fax : +1-408-935-0370
- | BBS (ISDN) : +49-241-9177-7800 BBS : +1-408-935-0380
- | CompuServe : GO ELSA CIS : GO ELSA
- | WWW : http://www.elsa.de WWW : http://www.elsa.com
- |
- | 03/01/97
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- Table of Contents
-
- 1. Overview
- 2. Contents
- 3. Installation
- 4. Notes
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- 1. Overview:
-
- This file contains notes and changes to the
- ISDN drivers.
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- 2. Contents:
-
- This directory contains the following files:
-
- Liesmich.TXT This file in german language
- ReadMe.TXT This file
- VCAPI11.SYS Virtual devicedriver for OS/2
- VCAPI11.EXE DOS-driver for the VDM-support
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- 3. Installation:
-
- - Install the ELSA os/2-drivers for your isdn-card. the
- driver version must be 2.00 or above.
-
- - Create a directory and copy all these files to this
- directory:
-
- md c:\elsaisdn
- copy a:\*.* c:\elsaisdn
-
- - Add the following line into your config.sys, directly behind
- the os2-driver for the isdn card:
-
- device=c:\elsaisdn\vcapi11.sys
-
- - Change the line DOS=LOW,NOUMB to DOS=HIGH,UMB in your CONFIG.SYS
-
- - Add the following line into your autoexec.bat:
-
- c:\elsaisdn\vcapi11.exe
-
- - Restart your system.
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- 4. Notes:
-
- - This driver release is BETA.
- - This driver has no WIN/OS2 support
- - You can start VCAPI11.EXE with "/Q" parameter to start
- it in quiet mode
- - You cannot de-install VCAPI11.EXE at this time
-