PC Online 1997 April

home *** CD-ROM | disk | FTP | other *** search

/ PC Online 1997 April / PCO_04_97.ISO / filesbbs / os2 / t2599mp.arj / READ.ME < prev next >

Wrap

Text File | 1996-11-27 | 80.0 KB | 2,460 lines

T-mail 25xx update list. The legend: # - bug fixed % - facility enchanced or changed or removed ! - new feature ? - temporary changed $ - only in commercial version ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2501 ========================= # ß¿¡σp«¡¿ºáµ¿∩ τáß«ó »p¿ »pÑñ'∩ó½Ñ¡¿¿ áñpÑßá 0:0/0.0 $! »ÑpÑ¼Ñ¡¡δÑ Voice_StartPlay ¿ Voice_EndPlay ºáñáεΓ ¿¼Ñ¡á Σá⌐½«ó ZYX, ¬«Γ«pδÑ íπñπΓ »p«¿úpá¡δ äÄ ¿ ÅÄæïà »p«¿úpδóá¡¿∩ ú«½«ß«óδσ ß««íΘÑ¡¿⌐ ó voice inbound. ! ÅÑpÑ¼Ñ¡¡á∩ HalfDuplex ºáñáÑΓ ß»¿ß«¬ »«ñßΓp«¬ ó ßΓp«¬Ñ CONNECT-a ñ½∩ ¬«Γ«pδσ íπñÑΓ ºá»pÑΘÑ¡á páí«Γá full-duplex »p«Γ«¬«½«ó. Åp¿¼Ñp (modem.ctl) HalfDuplex HST PEP ! ÅÑpÑ¼Ñ¡¡á∩ Error_Correction ºáñáÑΓ ß»¿ß«¬ »«ñßΓp«¬ ó ßΓp«¬Ñ CONNECT-a »« ¡á½¿τ¿ε «ñ¡«⌐ ¿º ¬«Γ«pδσ «»pÑñÑ½∩ÑΓß∩ Γ«, τΓ« ß«Ññ¿¡Ñ¡¿Ñ »p«¿º«Φ½« ß ¬«ppÑ¬µ¿Ñ⌐ «Φ¿í«¬. Åp¿¼Ñp (modem.ctl) Error_Correction V42 MNP ARQ REL HST º¡áτÑ¡¿Ñ »« π¼«½τá¡¿ε: Error_Correction V42 MNP ARQ .42 X. REL ALT PEP HST LAP COMP ! Janus file transfer protocol. ! ö½áú NOJANUS, ºáñáóáÑ¼δ⌐ ó subst.lst ñ½∩ ß¿ßΓÑ¼δ ºá»pÑΘáÑΓ ¿ß»«½∞º«óá¡¿Ñ »p«Γ«¬«½á Janus ß φΓ«⌐ ß¿ßΓÑ¼«⌐. Åp¿¼Ñp (subst.lst): 5030/15.43 Time CM # Flags NOJANUS,HST # bink mode: »πßΓδÑ .?LO Σá⌐½δ ó«ß»p¿¡¿¼áεΓß∩ ¬á¬ polls. # bink mode: .CLO Σá⌐½δ ΓÑ»Ñp∞ ¡Ñ óδºδóáεΓ imm status. ÆÑ»Ñp∞ φΓ« ñÑ½áεΓ .ILO Σá⌐½δ. # »p«í½Ñ¼á ß ¡Ñπí¿Ñ¡¿Ñ¼ busy Σá⌐½á ñ½∩ AKA Γ¿»á 44:0/0.0 # "slave ¡Ñ ó¿ñ¿Γ «τÑpÑñ∞ ¬«úñá ó ¡Ñ⌐ Γ«½∞¬« πº½δ ß τÑ¼-Γ« hold fileboxes ¿ ¡Ñ «ñ¡«ú« msg" === alpha-17 ! ÅÑpÑ¼Ñ¡¡á∩ Kill_Truncate (yes/NO) ó t-mail.ctl àß½¿ Yes, Γ« Σá⌐½δ, ¬«Γ«pδÑ »«ß½Ñ »ÑpÑñáτ¿ ¡áñ« truncate («í¡π½¿Γ∞) ó¼ÑßΓ« φΓ«ú« íπñπΓ πí¿Γδ. % é bink mode Γá¬ªÑ á¬Γ¿ó¡δ .QUE Σ½áú¿. äÑ⌐ßΓó¿Ñ á¡á½«ú¿τ¡« - óδºδóáÑΓ »ÑpÑß¬á¡¿p«óá¡¿Ñ outbound ñ½∩ «»pÑñÑ½Ñ¡¡«ú« áñpÑßá. Åp¿ páí«ΓÑ master/slave slave(s) Γá¬ªÑ ß«ºñáεΓ .QUE Σ½áú¿ ñ½∩ Γ«ú«, τΓ«íδ /master »ÑpÑß¬á¡¿p«óá½ outbound ñ½∩ áñpÑßá ¿ ÇèÇ ß¿ßΓÑ¼δ. # Äípáí«Γ¬á Alt-S ó bink mode. # Å«»páó½Ñ¡ pÑª¿¼ MailOnly ! è¡«»¬á Alt-H ó« ópÑ¼∩ «ª¿ñá¡¿∩ ºó«¡¬á óδºδóáÑΓ φ¬pá¡ ¿ßΓ«p¿¿ 20 »«ß½Ññ¡¿σ ßÑßß¿⌐. # Å«¬áºá¡¿∩ ó «τÑpÑñ¿ ¬«úñá ΓpáΣ¿¬ >64 Meg. ìñá, ¬Γ« íδ ¼«ú »«ñπ¼áΓ∞.. :) ! ÉáßΦ¿pÑ¡ ß¿¡Γá¬ß¿ß »p¿ «»¿ßá¡¿¿ MailBoxes: MailBox [(<flash indicator>)] <Name> = <dir> [|<command>] »p¿¼Ñp: MailBox (*) Andy Elkin = \t-mail\mail\mymail MailBox (S) Sysop = \t-mail\mail\sysop àß½¿ ºáñá¡ flash indicator (1 ß¿¼ó«½), Γ« »p¿ ¡á½¿τ¿¿ ó MailBox »¿ßÑ¼, »«∩ó¿óΦ¿σß∩ »«ß½Ñ »«ß½Ññ¡Ñú« »p«ß¼«Γpá pÑñá¬Γ«p«¼ φΓ«ú« Σ«½ñÑpá (lastread) φΓ«Γ ß¿¼ó«½ íπñÑΓ ¼¿úáΓ∞ ó¡¿ºπ ó ½Ñó«⌐ τáßΓ¿ pá¼¬¿. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2502 ========================= Åá¼∩Γ¿ êú«p∩ âp¿ΘÑ¡¬«... ============================================================================= # default value for Files_Unsecured #$ Åp«óÑp¬á ¡á½¿τ¿∩ Σá⌐½á(«ó) »ÑpÑñ ñ«ßΓáó¬«⌐ to external user. ! ôóÑñ«¼½Ñ¡¿Ñ « páí«ΓÑ t-server (exec). Åp¿ ß«ºñá¡¿¿ »¿ß∞¼á ¿ß»«½∞ºπÑΓß∩ Σá⌐½ <packets>\T-$$-<task no>\t-server.txt (¡á»p¿¼Ñp c:\t-mail\packets\T-$$-1\t-server.txt). é φΓ«Γ Σá⌐½ ¼«ª¡« »ÑpÑ¡á»páó½∩Γ∞ óδó«ñ ¬«¼á¡ñ, t-mail ¬ φΓ«¼π ñ«íáó¿Γ ß«ñÑpª¿¼«Ñ ¬«¼á¡ñ ¿º »¿ß∞¼á. î«ª¡« ¿ß»«½∞º«óáΓ∞ "¼áú¿τÑß¬«Ñ ¿¼∩" t-server.log, ¡á»p¿¼Ñp: --------- To: t-mail|password Subj: Exec --------- dir \files\*.* >> t-server.log ó¼ÑßΓ« t-server.log íπñÑΓ »«ñßΓáó½Ñ¡« »«½¡«Ñ ¿¼∩ Σá⌐½á t-server.txt. àß½¿ «ípáí«Γ¬á Exec ºá»p«ßá »p«¿ßσ«ñ¿Γ ó« ópÑ¼∩ ßÑßß¿¿, Γ« íπñÑΓ ßñÑ½á¡ .pkt Σá⌐½ ¿ «Γ«ß½á¡ ó φΓπ ßÑßß¿ε, ¿¡áτÑ - íπñÑΓ ßñÑ½á¡« »¿ß∞¼« (.msg) áóΓ«pπ ºá»p«ßá ß áΓp¿íπΓ«¼ DIRECT. # ÄΦ¿í¬á ß Share ó events.ctl ("»ÑpÑ¼ÑΦ¿óá¡¿Ñ ß »páó¿½á¼¿ Mail"). ! ä¿pÑ¬Γ¿óá Include ó subst.lst. ôp«óÑ¡∞ ó½«ªÑ¡¡«ßΓ¿ - 10. Åp¿¼Ñp: (zyx.ls_) define zyxdial AT&N35DP (usr.ls_) define zyxdial ATDP (subst.lst) [1] Include \t-mail\zyx.ls_ [2] Include \t-mail\usr.ls_ 333/333.333 dial zyxdial # é«ßßΓá¡«ó½Ñ¡¿Ñ ßÑßß¿⌐ »α¿ «íαδóÑ ¡á ƒ¡πßÑ. (ä¿αÑ¬Γ¿óá Boss ó events.ctl). # subst.lst - ftime ¡Ñ«íσ«ñ¿¼« íδ½« »¿ßáΓ∞ ß ºáú½áó¡«⌐ íπ¬óδ. # Janus: »α«í½Ñ¼á ß ºáóÑαΦÑ¡¿Ñ¼ ßÑßß¿¿ »α¿ freq Σá⌐½á ß »«½¡δ¼ »πΓÑ¼ (»« »áα«½ε). # »p«í½Ñ¼δ ß «Γ«ípáªÑ¡¿Ñ¼ «τÑpÑñ¿ (hold files ΓpáΣ¿¬ ó¼ÑßΓ« files) # «ípáí«Γ¬á Σá⌐½«ó »p¿ «ípδóÑ Janus: «í¡«ó½Ñ¡¿Ñ .?lo Σá⌐½«ó ¿ tobesent Σá⌐½«ó. # »p«í½Ñ¼δ ó Janus (¡Ñ»páó¿½∞¡δ⌐ skip Σá⌐½á, πí¿óá¡¿Ñ Σá⌐½á Ñß½¿ «¡ «í«póá¡ ¡á ¬«¡µÑ ¿ Γ.») # bink mode: ¡Ñ»páó¿½∞¡«Ñ ß¬á¡¿p«óá¡¿Ñ ñ½∩ points (»πßΓδÑ .dlo ¿ Γ.») # Janus: π¼Ñ¡∞ΦÑ¡¿Ñ í½«¬á ñ« 64 íá⌐Γ ¿ ¡ÑªÑ½á¡¿Ñ Ñú« πóÑ½¿τ¿óáΓ∞. # Trap »p¿ ¡Ñ«»pÑñÑ½Ñ¡¡«¼ dial prefix # æñÑ½á¡« ¿ß»«½∞º«óá¡¿Ñ MSGID »p¿ «»pÑñÑ½Ñ¡¿¿ º«¡δ destination ó ß½πτáÑ «ΓßπΓßΓó¿∩ INTL # ½á¼«τ¬á (D)TR # »p«í½Ñ¼á ß events, ópÑ¼∩ ¬«Γ«pδσ ºáñáÑΓß∩ »«ñ«í¡«: 2.23:05 (¿ß»«½¡∩½ß∩ ¿ ¡á ß½ÑñπεΘ¿⌐ ñÑ¡∞). ÆÑ»Ñp∞ Ñß½¿ event ºáñá¡ Γá¬: Exec alarm.exe 3.23:30 Γ« Ñú« ó«º¼«ª¡«Ñ ópÑ¼∩ ¿ß»«½¡Ñ¡¿∩ 23:30-23:59 ó ßpÑñπ. àß½¿ ºáñá¡ Exec alarm.exe 23:30, Γ« 23:30-0:30 % ¡«¼Ñpá ½¿¡¿⌐ ó /Noncommercial ºáñáεΓß∩ ó ¿¡ΓÑpóá½Ñ 0-2, Γ.Ñ ¼«ªÑΓ íδΓ∞ ¡Ñ í«½ÑÑ 3-σ ½¿¡¿⌐ ñ½∩ /noncommercial ¿ß»«½∞º«óá¡¿∩. # ÑΘÑ «ñ¿¡ ó«º¼«ª¡δ⌐ ßΓπ»«p ó zmodem-Ñ # ìáñ»¿ß∞ Password protected ¬«úñá log is locked # ZminCps ñ½∩ Janus: »p«»πß¬ »Ñpóδσ í½«¬«ó (¬á¬ ó zmodem) # Åp«í½Ñ¼δ ß πτÑΓ«¼ ΓpáΣ¿¬á »p¿ »ÑpÑσ«ñÑ τÑpÑº »«½¡«τ∞ (?) # ä«íáó½Ñ¡¿Ñ páº¼Ñpá Σá⌐½á ¬ «íΘÑ¼π páº¼Ñpπ "«ª¿ñáÑ¼«ú« ΓpáΣΣ¿¬á" # ΓÑα¼¿¡á½: ßΓáαΓ zmodem-a ¡á »ÑαÑñáτπ ¿ óß∩¬¿Ñ ú½ε¬áóδÑ ¡áñ»¿ß¿ ¡Ñ ¡á ¼ÑßΓÑ # ñó«⌐¡«Ñ ¿ß»«½¡Ñ¡¿Ñ Process Online Netmail # «Φ¿í¬á ó ºá»¿ß¿ JS. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2503 ========================= # Å«úpÑΦ¡«ßΓ∞ ó ¿¡ΓÑpΣÑ⌐ßÑ »p¿ ¡Ñπñáτ¡«¼ óσ«ñ¡«¼ EMSI. # ê¡«úñá ¡Ñπí¿óá¡¿Ñ inbound.tmp/outbound.tmp % Å«-ñpπú«¼π ºáñáÑΓß∩ º¡áτÑ¡¿Ñ »ÑpÑ¼Ñ¡¡«⌐ Sound: Sound <mask>|Yes|No, úñÑ mask ß«ßΓáó½∩ÑΓß∩ ¿º ß¿¼ó«½«ó: C - Connect B - Begin session S - End session A - Abort transfer E - Error H - Human caller D - Chat U - Unpack mail R - Ring T - Tick »p¿¼Ñp (t-mail.ctl) Sound CADT % êº¼Ñ¡Ñ¡δ default sound patterns. é«Γ ¬á¬«óδ «¡¿ íπñπΓ ó 2600: (π¬«p«τÑ¡á ß¿pÑ¡á Error ¿ ¿º¼Ñ¡Ñ¡ Ring) ;============================ T-Mail sound control =========================== ; ; SoundOf Connect 1 100 10 100 4 100 -3 100 4 ; ; Modem connection SoundOf Begin 1 37 1 10 64 ; ; Begin sessoin SoundOf End 20 5700 1500 2 7 ; ; End of session SoundOf Abort 1 900 1 5 50 ; ; Transfer aborted SoundOf Human 10 300 150 6 10 ; ; Human Caller SoundOf Error 1 200 1 2 800 1000 -1 2 800 ; ; Error (modem, fossil) SoundOf Chat 4 3500 0 50 1 3000 0 50 1 4000 0 5 1 ; ; Chat SoundOf Unpack 1 12000 -100 6 100 ; ; Unpacking mail SoundOf Ring 10 595 0 55 1 743 0 55 1 ; ; Ring SoundOf Tick 1 500 0 2 1 ; ; Simple 'tick' ; ; # Γpá» ó os/2 óÑpß¿¿ »p¿ ¿ßσ«ñ∩ΘÑ¼ yoohoo ¬«úñá «ß¡«ó¡«⌐ áñpÑß ß Γ«⌐ ßΓ«p«¡δ »pÑñßΓáó½∩ÑΓß∩ «Γ½¿τ¡δ¼ «Γ «ª¿ñáÑ¼«ú«. # ÄΦ¿í¬á »pÑñßΓáó½Ñ¡¿∩ »p«Γ«¬«½«ó ó EMSI % æ««íΘÑ¡¿∩ t-mail óδ¡ÑßÑ¡δ ó «ΓñÑ½∞¡δ⌐ Σá⌐½ t-mail.lng. ä«½ªÑ¡ ½ÑªáΓ∞ Γá¼ ªÑ, úñÑ t-mail.exe. % è¡«»¬á Alt-= ßñπí½¿p«óá¡á: ALt-- (ñ½∩ ñáΓß¬¿σ ¬½áó¿áΓπp¡δσ páß¬½áñ«¬) # TNC.exe («ΓßπΓßΓó¿Ñ »«ß½Ññ¡Ñú« πº½á) # «Φ¿í¬á »p¿ «ípáí«Γ¬Ñ include ó subst.lst # ¡Ñºá¬pδΓ¿Ñ thread-a ó os/2 óÑpß¿¿ »p¿ ºá»πß¬Ñ ó¡ÑΦ¡Ñ⌐ »p«úpá¼¼δ ß ¼«ñ¿Σ¿¬áΓ«p«¼ '!'. % óóÑñÑ¡δ ñó«⌐¡δÑ busy Σ½áú¿ - «ñ¿¡ ß«ºñáÑΓß∩ ó« ópÑ¼∩ handshake, ñpπú«⌐ »ÑpÑñ ¡áí«p«¼ ¡«¼Ñpá. % 2 ¡«óδσ ñ¿pÑ¬Γ¿óδ ó events.ctl: LimitIn LimitOut - ºáñáεΓ ½¿¼¿Γδ (ó ¼¿¡πΓáσ) ñ½∩ óσ«ñ∩Θ¿σ ¿ ¿ßσ«ñ∩Θ¿σ ßÑßß¿⌐. »p¿ ñ«ßΓ¿ª. ½¿¼¿Γá ßÑßß¿∩ »pÑpδóáÑΓß∩. æ¿¡Γá¬ß¿ß: (events.ctl) LimitIn <limit> [<addr list>] [<time interval>[,<time interval>...]] <limit> ºáñáÑΓ ópÑ¼∩ ó ¼¿¡πΓáσ (í«½∞ΦÑ 0). «ßΓá½∞¡«Ñ - ¬á¬ ó ñp. ñ¿pÑ¬Γ¿óáσ. Åp¿¼Ñpδ: define mynet 5030/*.* LimitIn 5 mynet 6:30-7:30 ; zmh LimitIn 45 All ; 24h limitIn 1 5030/132 ; test LimitOut 2 2:*/*.* !ZYX !/132 5:00-6:00 LimitOut 10 3:*/*.* !3:3/3 1.0:0-1.4:00,18:00-19:00,20:00-21:00 % ÅÑpÑ¼Ñ¡¡á∩ Output páí«ΓáÑΓ ΓÑ»Ñp∞ ¿ ó os/2 óÑpß¿¿. àß½¿ «¡á = Memory, ¿ß»«½∞ºπÑΓß∩ óδó«ñ ó ½«ú¿τÑß¬¿⌐ ó¿ñÑ«íπΣÑp, Ñß½¿ BIOS - Γ« óδó«ñ «ßπΘÑßΓó½∩ÑΓß∩ τÑpÑº Vio Σπ¡¬µ¿¿. Åp¿ ºá»πß¬Ñ t-mail ó PM «¬¡Ñ ßΓp«ú« pÑ¬«¼Ñ¡ñπÑΓß∩ output=BIOS. % ìá φ¬pá¡Ñ node's info »«¬áºδóáÑΓß∩ Dial prefix ñ½∩ πº½á (hidden ½¿¡¿¿ πº½á). % Å«ññÑpª¬á ó¿ñÑ«pÑª¿¼«ó 80x?? (25,30,43,50). T-mail »p¿ ºá»πß¬Ñ ñÑΓÑ¬Γ¿pπÑΓ ¬«½-ó« ßΓp«¬ ¡á φ¬pá¡Ñ. # êß»páó½Ñ¡á «Φ¿í¬á, »p¿ó«ñ∩Θá∩ ¬ ¬páσπ »p¿ »ÑpÑτ¿Γ¬Ñ .ctl Σá⌐½«ó ¿ »p«í½á¼á¼ ß dial prefixes. $ êº¼Ñ¡Ñ¡á páí«Γá Σá¬ß-úÑ⌐Γá. Fax queue »ÑpÑß«í¿páÑΓß∩ »p¿ »ÑpÑ»á¬«ó¬Ñ »«τΓδ (alt-y). ìá »¿ß∞¼« ßΓáó¿Γß∩ áΓp¿íπΓ sent Γ«½∞¬« »«ß½Ñ »«ßδ½¬¿ Σá¬ßá (¿½¿ »p¿ ¡Ñó«º¼«ª¡«ßΓ¿ Ñú« «Γ«ß½áΓ∞), á Γá¬ªÑ »p¿ πñá½Ñ¡¿¿ Σá¬ßá ¿º «τÑpÑñ¿ »« ¬¡«»¬Ñ Del. % ÅÑpÑ¼Ñ¡¡á∩ dial_terminate ºáñáÑΓ ¼«ñÑ¼¡πε ßΓp«¬π,¬«Γ«pá∩ »«ßδ½áÑΓß∩ ñ½∩ ºáóÑpΦÑ¡¿∩ dialing. ç¡áτÑ¡¿Ñ »« π¼«½τá¡¿ε: "v''^'|". àß½¿ drop dtr ¡ÑªÑ½áΓÑ½∞¡«Ñ ∩ó½Ñ¡¿Ñ, ¼«ª¡« »Ñp«»pÑñÑ½¿Γ∞ (¡á»p¿¼Ñp) Γá¬: Dial_Terminate ~| %$ ÅÑpÑ¼Ñ¡¡á∩ Fax_Lock_Baud ºáñáÑΓ DTE-DCE baudrate ñ½∩ ß½πτá∩, ¬«úñá «¡« «Γ½¿τáÑΓß∩ «Γ óÑ½¿τ¿¡δ Lock_Baud. ìÑ¬«Γ«pδÑ ¼«ñÑ¼δ, ¡á»p¿¼Ñp US Courier V.* ñ«»πß¬áεΓ lock_baud 115¬, «ñ¡á¬« fax_lock_baud óδ «í∩ºá¡δ πßΓá¡«ó¿Γ∞ 19200. ç¡áτÑ¡¿Ñ »« π¼«½τá¡¿ε páó¡« Lock_baud, á Ñß½¿ «¡« ¡Ñ «»pÑñÑ½Ñ¡«, Γ« 19200. çá¼Ñτá¡¿Ñ: óáΦ ¬«¼¼π¡¿¬áµ¿«¡¡δ⌐ ñpá⌐óÑp ñ«½ªÑ¡ íδΓ∞ ¡áßΓp«Ñ¡ Γá¬, τΓ«íδ ¼«ª¡« íδ½« »ÑpÑ¡áßΓpá¿óáΓ∞ ß¬«p«ßΓ∞ DCE-DTE. % Å«ññÑpª¬á ó¡ÑΦ¡Ñú« «ípáí«Γτ¿¬á FREQs. çáñáÑΓß∩ ¬«¡ßΓpπ¬µ¿Ñ⌐ Process FREQ ó t-mail.ctl. ê¼∩ .req Σá⌐½á »ÑpÑñáÑΓß∩ ¼á¬p«ß«¼ *F. ÉÑºπ½∞ΓáΓ (ß»¿ß«¬ Σá⌐½«ó, ¬«Γ«pδÑ ß½ÑñπÑΓ «Γ«ß½áΓ∞) «ípáí«Γτ¿¬ ñ«½ªÑ¡ »«¼ÑßΓ¿Γ∞ ó Σá⌐½ ß ¿¼Ñ¡Ñ¼ RESPONCE.FRQ ó ¬áΓá½«úÑ Σá⌐½ <packets>\T-$$-<task no> (¡á»p¿¼Ñp c:\t-mail\packets\T-$$-1\RESPONCE.FRQ). ¥Γ« - ΓÑ¬ßΓ«óδ⌐ Σá⌐½, ¬áªñá∩ ßΓp«¬á ¬«Γ«p«ú« - »«½¡«Ñ ¿¼∩ Σá⌐½á. ê¼∩ ¼«ª¡« »pÑñóáp∩Γ∞ ß¿¼ó«½á¼¿ '^' ¿½¿ '#' (πñá½¿Γ∞ ¿½¿ «í¡π½¿Γ∞, ß««ΓóÑΓßΓóÑ¡¡«). Åp¿¼Ñp (t-mail.ctl) Process Freq profr.exe *F *A *B *T % ä«íáó½Ñ¡δ »«½∩ SystemStatus ¿ RemoteStatus ó Σá⌐½Ñ <Flag_Session>. SystemStatus ¼«ªÑΓ íδΓ∞ LISTED ¿½¿ UNLISTED, RemoteStatus - PROTECTED ¿½¿ UNPROTECTED. Å«½Ñ Baudrate ºá¼Ñ¡Ñ¡« ¡á Baud. % ôípá¡á ñ¿pÑ¬Γ¿óá Boss ¿º events.ctl. % ä«íáó½Ñ¡δ ñ¿pÑ¬Γ¿óδ RestoreOut ¿ RestoreIn ó Ñvents.ctl. æ¼δß½ ¿ ß¿¡Γá¬ß¿ß RestoreOut Γá¬«⌐ ªÑ, ¬á¬ π ñ¿pÑ¬Γ¿óδ Boss ó óÑpß¿¿ 2500. RestoreIn - Γ« ªÑ ßá¼«Ñ, ¡« ñ½∩ óσ«ñ∩Φ¿σ ßÑßß¿⌐. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2504 ========================= # »p«í½Ñ¼á ß »p¿«p¿ΓÑΓá¼¿ ó os/2 óÑpß¿¿ ("Γ«p¼«º¿Γ ¼áΦ¿¡π") # RESPONCE.FRQ -> RESPONSE.FRQ # ÄΓ«ípáªÑ¡¿Ñ cps ó ΓÑp¼¿¡á½Ñ # 0M ó «τÑpÑñ¿ ¿ »p. # æΓpÑ½¬á ó½Ñó« »p¿ »πßΓ«⌐ «τÑpÑñ¿ # ¿¡ΓÑp»pÑΓáµ¿∩ Σ½áúá TCM ¬á¬ æî. # trap os/2 óÑpß¿¿ (»p¿ páí«ΓÑ ß Σ½áúá¼¿, multiline). # óΓ«p¿τ¡á∩ »«ßδ½¬á ATA ("¡áτ¿¡áÑΓ «ΓóÑτáΓ∞ ¿ íp«ßáÑΓ Γpπíπ") # Process Online ñ½∩ Janus session. ìÑ óßÑúñá íπñÑΓ páí«ΓáΓ∞ ß BinkleyTerm (ó ß½πτáÑ, Ñß½¿ »ÑpÑñáτá ºá¬«¡τÑ¡á pá¡∞ΦÑ, τÑ¼ »p¿Ñ¼ óßÑσ Σá⌐½«ó, pÑºπ½∞ΓáΓ páí«Γδ Process online ¡Ñ ¼«ªÑΓ íδΓ∞ «Γ«ß½á¡ ó Γπ ªÑ ßÑßß¿ε). Åápá t-mail - t-mail (2504) «ípáíáΓδóáÑΓ φΓ« ¡«p¼á½∞¡«, »p¿τÑ¼ Janus ßÑßß¿∩ ¼«ªÑΓ pÑßΓápΓ«óáΓ∞ ½εí«Ñ ¬«½¿τÑßΓó« páº. Process Online ºá»πß¬áεΓß∩ »« «¬«¡τá¡¿¿ »p¿Ñ¼á Σá⌐½«ó. Å«ß½Ñ φΓ«ú« á¡á½¿º¿pπεΓß∩ fileboxes ¿ Σá⌐½δ «ΓΓπñá «Γßδ½áεΓß∩. é«Γ «ípáºÑµ ¿ß»«½∞º«óá¡¿∩: Caller Answerer ºó«¡¿Γ, «Γßδ½áÑΓ filename.ext Process Online filename.ext óδºδóáÑΓ »«ßδ½¬π (τÑpÑº ¬«»¿p«óá¡¿Ñ ó filebox) Σá⌐½á fileres.ext Process Onlie fileres.ext óδºδóáÑΓ »«ßδ½¬π Σá⌐½á filearq.ext % Process Immediate. éδ»«½¡∩ÑΓß∩ ßpáºπ »«ß½Ñ »p¿Ñ¼á Σá⌐½á, ¬«Γ«p«¼π ß««ΓóÑΓßΓóπÑΓ. æ¿¡Γá¬ß¿ß - ß¼ Process Online. »p¿¼Ñp (t-mail.ctl) [1] Process Imm *.exe !del inbound\*.exe [2] Process Imm *.reg start register.cmd % Switch -DF »p¿ ºá»πß¬Ñ t-mail.exe »p¿ó«ñ¿Γ ¬ Γ«¼π, τΓ« ºá»¿ß¿ « »ÑpÑñá¡¡δσ ¿ »p¿¡∩Γδσ Σá⌐½áσ ó »p«Γ«¬«½áσ íπñπΓ ñÑ½áΓ∞ß∩ ß »«½¡δ¼ »πΓÑ¼, ¡á»p¿¼Ñp: (t-mail.log) ZS-32 c:\outbound\tmp\file.ext 12345 OK:2:30, 1234 cps, 99% è½ετ -DF ¼«ª¡« ¿ß»«½∞º«óáΓ∞ ó ß«τÑΓá¡¿¿ ¿½¿ »« «ΓñÑ½∞¡«ßΓ¿ ß -D1: Åp¿¼Ñpδ: t-mail.exe -D1f t-mail.exe -D1 -DF t-mail.exe -DF T.o. ºá ¬½ετ«¼ -D ß½ÑñπεΓ ¼«ñ¿Σ¿¬áΓ«pδ ßΓÑ»Ñ¡¿ ñÑΓá½¿ºáµ¿¿ ½«úá. Å«¬á ¿σ Γ«½∞¬« ñóá.. %$ ä½∩ external nodes ¼«ª¡« ΓÑ»Ñp∞ ºáñáóáΓ∞ ß»¿ß«¬ Σá⌐½«ó ñ½∩ ñ«ßΓáó¬¿. æ««Γó. »p«µÑßß ñ«ßΓáó¬¿ íπñÑΓ óδºóá¡ Γ«½∞¬« «ñ¿¡ páº (á ¡Ñ ¬áªñδ⌐ páº ñ½∩ ¬áªñ«ú« Σá⌐½á ¬á¬ pá¡∞ΦÑ) æ»¿ß«¬ ºáñáÑΓß∩ ¼á¬p«ß«¼ *@ (ó¼ÑßΓ« *F ñ½∩ «ΓñÑ½∞¡δσ Σá⌐½«ó). àß½¿ »p«µÑßß óÑp¡ÑΓ errorlevel 0, Γ« Σá⌐½δ (óßÑ) ßτ¿ΓáεΓß∩ ñ«ßΓáó½Ñ¡¡δ¼¿. ê¡áτÑ - óßÑ - ¡Ññ«ßΓáó½Ñ¡¡δ¼¿. Åp¿¼Ñpδ (subst.lst) 124.1 time CM external deliver.exe -n -d *@ 124.2 time CM external !copy *F vol2:\users\dimitry\inbound æ»¿ß«¬ Σá⌐½«ó - ΓÑ¬ßΓ«óδ⌐ Σá⌐½, ¬áªñδ⌐ Σá⌐½ - ß ¡«ó«⌐ ßΓp«¬¿. % terminal: added Cursor Position Report ó «ΓóÑΓ ¡á CurPosRequest % ÉáßΦ¿pÑ¡ ß¿¡Γá¬ß¿ß ñ½∩ »ÑpÑ¼Ñ¡¡«⌐ MailBox: MailBox [(<flash indicator>)] <Name> = <dir> [|<command>] - ¬á¬ »pÑªñÑ. MailBox [(<flash indicator>)] <Name> -> <dir> [|<command>] - mailox ¡Ñ ß¬á¡¿pπÑΓß∩ ¡á »pÑñ¼ÑΓ ¡«óδσ »¿ßÑ¼ (write only) MailBox [(<flash indicator>)] <Name> <- <dir> [|<command>] - mailbox ß¬á¡¿pπÑΓß∩, êç ¡Ñú« »¿ß∞¼á »ÑpÑ¡«ß∩Γß∩, ¡« é ¡Ñú« ¡¿τÑú« ¡Ñ »ÑpÑ¡«ß¿Γß∩ (read only) % ¬¡«»¬á Alt-H (History) ºá¼Ñ¡Ñ¡á ¡á Alt-I (hIstory) % ß¡∩Γ« «úpá¡¿τÑ¡¿Ñ ¡á ¼á¬ß. ¡«¼Ñp .msg Σá⌐½á. % »ÑpÑ¼Ñ¡¡á∩ Total_messages «»pÑñÑ½∩ÑΓ «íΘÑÑ ¬«½¿τÑßΓó« .msg Σá⌐½«ó, ¬«Γ«p«Ñ ¼«ªÑΓ «ípáíáΓδóáΓ∞ t-mail. ç¡áτÑ¡¿Ñ »« π¼«½τá¡¿ε 1000. èáªñ«Ñ »¿ß∞¼« ΓpÑíπÑΓ 4 íá⌐Γá »á¼∩Γ¿. îá¬ß. º¡áτÑ¡¿Ñ total_messages - 32k. Åp¿ ¿º¼Ñ¡Ñ¡¿¿ timestamp ¿½¿ páº¼Ñpá ½εí«ú« »¿ß∞¼á »p«¿ßσ«ñ¿Γ »ÑpÑ»á¬«ó¬á. # «Φ¿í«τ¡á∩ úÑ¡Ñpáµ¿∩ poll »p¿ páºó«p«ΓÑ ßÑßß¿¿ ó zmodem-e. % ì«óá∩ ñ¿pÑ¬Γ¿óá ñ½∩ Process, Process_Flag ¿ Key: KeyMacro. çáñáÑΓ »«ß½Ññ«óáΓÑ½∞¡«ßΓ∞ ß¿¼ó«½«ó ¿ ß¬á¡-¬«ñ«ó, ¬«Γ«pδÑ íπñπΓ ó«ß»p¿¡∩Γδ t-mail ¬á¬ íπñΓ« «¡¿ óóÑñÑ¡δ ß ¬½áó¿áΓπpδ. »p¿¼Ñpδ: Process_Flag key1.t-m KeyMacro <Alt-D>d:\command.com<0d>5030/124<0d> Key <F10> KeyMacro <Ctrl-F1>5030/53<0d><5100> Key <Shift-F9> KeyMacro <Alt-F4><Alt-P>/124<0d><Ctrl-O>/124<0d> Key <Alt-F4> service.exe Process Imm *.exe KeyMacro <Alt-C>Hey, man!<0d>Thank you for this stuff!<0d> îá¬p«»«ß½Ññ«óáΓÑ½∞¡«ßΓ∞ ¼«ªÑΓ ó¬½ετáΓ∞ ó ßÑí∩ 1) ASCII ß¿¼ó«½δ 2) ¼¡Ñ¼«¬«ñδ (ß¼ ñ«¬π) 3) hex ¬«ñδ. 2) ¿ 3) ºá¬½ετáεΓß∩ ó ß¬«í¬¿ <> hex ¬«ñδ ñ«½ª¡δ ß«ñÑpªáΓ∞ í«½ÑÑ «ñ¡«ú« ß¿¼ó«½á ¿ ¡Ñ ¼«úπΓ ¡áτ¿¡áΓ∞ß∩ ß ß¿¼ó«½á 'F'. ÅÑpóδ⌐ »p¿¼Ñp ºáßΓáó½∩ÑΓ »«ß½áΓ∞ Σá⌐½ ¡á πºÑ½ /124, á óΓ«p«⌐ »«¬áºδóáÑΓ hidden line πº½á /53 (¬«ñ 5100hex - φΓ« PgDn). ÆpÑΓ¿⌐ »«¬áºδóáÑΓ í«½ÑÑ ß½«ª¡δ⌐ óáp¿á¡Γ ¿ß»«½∞º«óá¡¿∩. Å«ß½Ññ¡¿⌐ á¬Γ¿ó¿º¿pπÑΓ Chat ¿ ß««íΘáÑΓ »ápπ ß½«ó to remote ó ß½πτáÑ, Ñß½¿ »p¿¡∩Γ exe Σá⌐½. îá¬ß. pá¼Ñp ¼á¬p«»«ß½Ññ. - 128 ß¬á¡¬«ñ«ó. æ¿¼ó«½δ ó¡πΓp¿ ¼á¬p«»«ß½Ññ«óáΓÑ½∞¡«ßΓ¿ ¡Ñ ¿¡ΓÑp»pÑΓ¿pπεΓß∩ ¬á¬ ¬½ετ¿ ñpπú¿σ (¿½¿ φΓ«⌐ ªÑ) ¼á¬p«»«ß½Ññ«óáΓÑ½∞¡«ßΓÑ⌐. % ì«óá∩ ñ¿pÑ¬Γ¿óá ó events.ctl : KeyMacro (events.ctl) æ¿¡Γá¬ß¿ß: KeyMacro <keymacro> <time> Åp¿¼Ñp: (events.ctl) KeyMacro <Shift-F10> 3:00 KeyMacro <Alt-s>d:\keys\demo.key<0d>/124<0d> 1.6:00,4.6:00 éδºδóáÑΓ »ßÑóñ«¡áªáΓ¿Ñ ºáñá¡¡δσ ¬¡«»«¬ ó «º¡áτÑ¡¡«Ñ ópÑ¼∩. %$ ÅÑpÑ¼Ñ¡¡á∩ Fax_Id ºáñáÑΓ ßΓp«¬π ¿ñÑ¡Γ¿Σ¿¬áµ¿¿, ¬«Γ«pá∩ »ÑpÑñáÑΓß∩ »p¿ fax handshake. îá¬ß¿¼á½∞¡á∩ ñ½¿¡á - 20 ß¿¼ó«½«ó. Ç¡á½«ú¿τ¡á∩ ßΓp«¬á remote «Γ«ípáªáÑΓß∩ ¡á φ¬pá¡Ñ ¿ »¿ΦÑΓß∩ ó log. Åp¿¼Ñp (t-mail.ctl) Fax_ID T-Mail at 5030/15 ; Fax id string % Chat ó ƒ¡πßÑ. % Skip file (Ctrl-X) ó ƒ¡πßÑ. # ¥¬pá¡ »p¿ »«ßδ½¬Ñ ΣpÑ¬«ó ó ƒ¡πßÑ # è«ppÑ¬µ¿∩ ºáú«½«ó¬á PKT »p¿ ¿ß»«½∞º«óá¡¿¿ share # Å«ñßτÑΓ outgoing traffic ("φΣΣÑ¬Γ 4095î") #$ Å«τ¿¡Ñ¡ »p¿Ñ¼ Σá¬ß«ó ñ½∩ faxclass 2.0: »p¿¡πñ¿ΓÑ½∞¡« »«ßΓáó½Ñ¡ ¡πª¡δ⌐ »«p∩ñ«¬ í¿Γ. é«Γ ¼«¿ ¡áßΓp«⌐¬¿ ñ½∩ USR Courier: Init ~ATZ| Dial_Prefix Fax ATDP Lock_Baud 38400 Fax_Class 2.0 Modem_Answer ATA| profile »«τΓ¿ ¡Ñ «Γ½¿τáÑΓß∩ «Γ factory settings ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2505 ========================= % êº¼Ñ¡Ñ¡ ß¿¡Γá¬ß¿ß ñ½∩ ºáñá¡¿∩ á½¿áß«ó. (index.frq): íδ½«: <alias> <pathname/mask> [<address list>] ßΓá½«: <alias> [(<modifier>)] <pathname/mask> [<command>] úñÑ ¡Ñ«í∩ºáΓÑ½∞¡δ⌐ modifier «ñ¡« ¿º ß½ÑñπεΘ¿σ: Oldest - ßá¼δ⌐ ßΓápδ⌐ (»« ñáΓÑ/ópÑ¼Ñ¡¿) Σá⌐½ ¿º <pathname/mask> Newest - ßá¼δ⌐ ¡«óδ⌐ Smallest - ßá¼δ⌐ ¼á½δ⌐ »« páº¼Ñpπ Biggest - ßá¼δ⌐ í«½∞Φ«⌐ »p¿¼Ñpδ (index.frq): T-beta (Newest) c:\support\t-beta\t-25??.* DOS (Smallest) d:\dos\*.* test.bat # Åp«í½Ñ¼á ß »«ßΓ«∩¡¡δ¼¿ »ÑpÑ»á¬«ó¬á¼¿ »p¿ ¡á½¿τ¿¿ »¿ß∞¼á ß áΓp¿íπΓ«¼ AUDITREQ. # ÄΓ¬pδΓ¿Ñ »ÑpÑñáóáÑ¼δσ Σá⌐½«ó rd/wr (ΓÑ»Ñp∞ readonly). %$ Å«ßδ½¬á Σá¬ß«ó ñ½∩ Fax Class 2.0. Courier ¡á ¬«Γ«p«¼ ∩ »p«í«óá½, »«ßδ½áÑΓ Γ«½∞¬« 1 ßΓpá¡¿µπ ñ«¬π¼Ñ¡Γá ¿ »«ß½Ñ φΓ«ú« ßá¼«ó«½∞¡« ¬½áñÑΓ Γpπíπ. î«ªÑΓ íδΓ∞ φΓ« «¡ Γá¬«⌐ »« ª¿º¡¿..:( #$ Åp«»áñá¡¿Ñ «¬«¡τá¡¿∩ ßΓpá¡¿µδ »p¿ »«ßδ½¬Ñ Σá¬ßá. # "ü¿ΓδÑ »á¬ÑΓδ". ìá ßá¼«¼ ñÑ½Ñ φΓ« íδ½¿ ¡Ññ«¬áτá¡¡δÑ »á¬ÑΓδ, ¬«Γ«pδÑ »« »pÑñ½«ªÑ¡¿ε Alex Korchmar ß«σpá¡∩½¿ß∞. ä½∩ sysop=Alex Korchmar ó 2505 «ßΓá½«ß∞ ¬á¬ ¿ ó 2503/04, ñ½∩ óßÑσ «ßΓá½∞¡δσ - ¬á¬ »pÑªñÑ (<2503). #$ Åp¿ «ΓóÑΓÑ Voice/Fax/data »«½πτÑ¡¿Ñ CNG Γ«¡á ¡Ñ óδºδóá½« fax «ΓóÑΓ. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2506 ========================= # è«¡ßΓpπ¬µ¿∩ Repack <addr list> ¡Ñ páí«Γá½á ñ½∩ Key, ¿ óÑp«∩Γ¡« ñ½∩ process. Éáí«Γá½á Γ«½∞¬« Repack íÑº áñpÑß«ó. % ÉáßΦ¿pÑ¡ ß¿¡Γá¬ß¿ß ñ½∩ Extern_Mail. Æ«½∞¬« ñ½∩ óδσ«ñ¡δσ ºó«¡¬«ó ¼«ª¡« ºá»πß¬áΓ∞ extern_mail ¡Ñ Γ«½∞¬« »p¿ »«½πτÑ¡¿¿ keyword, ¡« ¿ »p¿ ¡Ñ»«½πτÑ¡¿¿ ¡¿τÑú«. Æ« ÑßΓ∞ t-mail éîàæÆÄ handshake and session runs external mailer. Instead of keyword in this case you should set word 'Nothing' as a keyword. Example (t-mail.ctl): Extern_Mail [/124.99 /15.99] Nothing uupc.bat DIRECT *P # ÄτÑpÑñ¡δÑ »p«í½Ñ¼δ ß ºáµ¿¬½¿óá¡¿Ñ¼ »p¿ π»á¬«ó¬Ñ. ÆÑ»Ñp∞ ¡áñÑεß∞ óßÑ íπñÑΓ Äè. % êº¼Ñ¡Ñ¡ ß¿¡Γá¬ß¿ß ñ½∩ External, «ípáí«Γτ¿¬«ó ¼«ñÑ¼¡δσ ß½«ó. Syntax: (t-mail.ctl/modem.ctl) External <modem responce> | <command> î«ñÑ¼¡δÑ ß½«óá «ΓñÑ½∩εΓß∩ «Γ ¬«¼á¡ñδ ß¿¼ó«½«¼ '|'. Åp¿ ºáñá¡¿¿ ¬«¼á¡ñδ ¼«ª¡« ¿ß»«½∞º«óáΓ∞ óßÑ ΓÑ ªÑ ¼á¬p«ßδ ¿ ¬½ετÑóδÑ ß½«óá, τΓ« ¿ ñ½∩ Process_Flag. Äípáí«Γτ¿¬¿ ºá»πß¬áεΓß∩ »«ß½Ñ »«½πτÑ¡¿∩ ºáñá¡¡«⌐ ßΓp«¬¿ «Γ ¼«ñÑ¼á, »pá¬Γ¿τÑß¬¿ ¡Ñºáó¿ß¿¼« «Γ Γ«ú«, úñÑ φΓ« »p«¿º«Φ½« (»p¿ «ΓóÑΓÑ, »p¿ ¿ßσ«ñ∩ΘÑ¼ ºó«¡¬Ñ, »p¿ «ª¿ñá¡¿¿ ß«íδΓ¿∩ ¿½¿ ºó«¡¬á). Åp¿¼Ñpδ: External NO DIALTONE | Set Circle=500 External NO CARRIER | !test1.cmd *P External CONNECT FAX | runfax.cmd *O # ö½áú¿ ºá¡∩Γ«ßΓ¿ πº½á, ß«ºñáóáÑ¼δÑ »«ß½Ñ EMSI, Γá¬ªÑ ¡Ñ »«ºó«½∩εΓ ñpπú¿¼ ½¿¡¿∩¼ ºó«¡¿Γ∞. # æí«⌐ ßΓáΓ¿ßΓ¿¬¿ »p¿ ß¿¡σp«¡¿ºáµ¿¿ τáß«ó % ÉáßΦ¿pÑ¡ ß¿¡Γá¬ß¿ß ñ½∩ Mailboxes. ÆÑ»Ñp∞ ¼«ª¡« ºáñáóáΓ∞ áñpÑß¡δÑ mailboxes. ÅÑpÑ¡«ß »¿ßÑ¼ ó ¡¿σ »p«¿ºó«ñ¿Γß∩ ¡Ñ »p¿ ß«ó»áñÑ¡¿¿ ¿¼Ñ¡¿ ó »«½Ñ "To", á »p¿ ß«ó»áñÑ¡¿¿ áñpÑßá »«½πτáΓÑ½∩ ß ºáñá¡¡δ¼ ó¼ÑßΓ« ¿¼Ñ¡¿ »p¿ «»¿ßá¡¿¿ MailBox. ÅÑpÑ¡«ß ¿º Γá¬¿σ mailboxes ó netmail »p«¿ßσ«ñ¿Γ »p¿ ¡Ñß«ó»áñÑ¡¿¿ destination áñpÑßá »¿ß∞¼á ß áñpÑß«¼ ºáñá¡¡δ¼ ñ½∩ mailbox a Γá¬ªÑ áñpÑß«¼ »ÑpÑáñpÑß«ó¬¿ ºáñá¡¡δ¼ ñ½∩ φΓ«ú« mailbox. Åp¿¼Ñp (t-mail.ctl) MailBox 5030/15.43 = c:\t-mail\mail\junkmail | !echo Junkîail received MailBox /15.13 -> c:\t-mail\mail\13mail /15.0 MailBox /15.1 = c:\t-mail\mail /15.4 »«ß½Ññ¡¿⌐ »p¿¼Ñp - »p«ßΓ«⌐ forward (Ñß½¿ Mail_out = c:\t-mail\mail). è«úñá ó ¬áτÑßΓóÑ destination directory π¬áºá¡ netmail folder (<mail_out>) Γ« ÑßΓ∞ «ß«íÑ¡¡«ßΓ¿, ¡á»p¿¼Ñp ¬«¡ßΓpπ¬µ¿∩ MailBox /15.1 = c:\t-mail\mail 15.1 páí«ΓáΓ∞ ¡Ñ íπñÑΓ, á ó«Γ φΓá »ápá: MailBox /15.1 = c:\t-mail\mail /15.4 MailBox /15.4 = c:\t-mail\mail /15.1 »p¿óÑñÑΓ ¬ ºáµ¿¬½¿óá¡¿ε »¿ß∞¼á. # cps ó ΓÑp¼¿¡á½Ñ ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2507 ========================= # êßτÑºá¡¿Ñ ΓpáΣ¿¬á ¿º fileboxes »p¿ »ÑpÑ»á¬«ó¬Ñ »p¿ ¿º¼Ñ¡Ñ¡¿¿ »¿ß∞¼á. % ü«½ÑÑ «ßΓ«p«ª¡δ⌐ ¬p¿ΓÑp¿⌐ »ÑpÑ»á¬«ó¬¿. % éδσ«ñ ß errorlevel »p¿ óδº«óÑ BBS: (ä«íáó«τ¡δ⌐ ß¿¡Γá¬ß¿ß, t-mail.ctl) Process BBS Exit <errorlevel> »p¿¼Ñp: Process BBS Exit 18 ; exit with errorlevel 18 when Esc-Esc pressed ¬á¬ »p¿ φΓ«¼ »ÑpÑñáóáΓ∞ »ápá¼ÑΓpδ ß«Ññ¿¡Ñ¡¿∩ BBS ß«ΣΓπ ∩ »«¬á ¡Ñ »p¿ñπ¼á½. ! ì«óá∩ ñ¿pÑ¬Γ¿óá ó events.ctl: Flavor. Å«ºó«½∩ÑΓ ó ºáñá¡¡«Ñ ópÑ¼∩ ñ½∩ ºáñá¡¡δσ áñpÑß«ó (¿º ΓÑσ, τΓ« ÑßΓ∞ ó «τÑpÑñ¿) ¿º¼Ñ¡¿Γ∞ áΓp¿íπΓδ »¿ßÑ¼ (ñ½∩ bink mode - páßΦ¿pÑ¡¿Ñ .?LO .?UT Σá⌐½«ó). î«ª¡« πßΓá¡«ó¿Γ∞ áΓp¿íπΓδ: Hold, Crash ¿½¿ ßíp«ß¿Γ∞ ¿σ (Normal). æ¿¡Γá¬ß¿ß: Flavor (Mail|Files|All Hold|Crash|Normal) <addr list> <time> àß½¿ ºáñá¡« Mail, Γ« áΓp¿íπΓδ ¼Ñ¡∩εΓß∩ Γ«½∞¬« ñ½∩ »p«ßΓδσ »¿ßÑ¼, Ñß½¿ Files - Γ« ñ½∩ fileattached »¿ßÑ¼, All- ¿ ΓÑ ¿ ñpπú¿Ñ. Åp¿¼Ñpδ: (events.ctl) Flavor (Mail Hold) 5030/*.* !5030/132 4:00 Flavor (Mail Normal) All 4:30 Flavor (Files Crash) /124 8:00 Flavor (All Hold) ZYX 5:00 »p¿¼Ñτá¡¿Ñ: ñ½∩ bink mode, ó ß½πτáÑ, ¬«úñá ¼Ñ¡∩ÑΓß∩ flavor »«τΓ«ó«ú« »á¬ÑΓá ¿ destination »á¬ÑΓ ß Γá¬¿¼ ªÑ páßΦ¿pÑ¡¿Ñ¼ πªÑ ßπΘÑßΓóπÑΓ, Γ« t-mail ß½¿óáÑΓ »«τΓ«óδÑ »á¬ÑΓδ ß páº¡δ¼¿ páßΦ¿pÑ¡¿∩¼¿ ó «ñ¿¡ (φΓ« ªÑ - ñ½∩ .?LO Σá⌐½«ó). ! ì«óá∩ ¬¡«»¬á: Ctrl-F. Å«ºó«½∩ÑΓ "ópπτ¡πε" ¿º¼Ñ¡¿Γ∞ flavor ñ½∩ ß»¿ß¬á áñpÑß«ó. ! ÅÑpÑ¼Ñ¡¡á∩ Crash_as_Imm (Yes/No, default No) ºáßΓáó½∩ÑΓ ¿¡ΓÑp»pÑΓ¿p«óáΓ∞ áΓp¿íπΓ Crash »p¿ π»á¬«ó¬Ñ »¿ßÑ¼ ¬á¬ Immediate+Direct (¿¡áτÑ - »p«ßΓ« ¬á¬ Direct). ä½∩ bink mode - .CLO/.CUT ¬á¬ .ILO/.IUT ! ÅÑpÑ¼Ñ¡¡δÑ Connect_31200 ¿ Connect_33600 ñ«íáó½Ñ¡δ ñ½∩ ßτáßΓ½¿óδσ «í½áñáΓÑ½Ñ⌐ ¼«ñÑ¼«ó ß φΓ¿¼¿ ß¬«p«ßΓ∩¼¿. %$ Å«ññÑpª¬á voice modes ó ¼«ñÑ¼áσ "Éπßß¬¿⌐ ¬πp∞Ñp". (épÑ¼Ñ¡¡« »«ññÑpª¿óáεΓß∩ Γ«½∞¬« ADPCM 2 ¿ 4) ! ¡«óá∩ »ÑpÑ¼Ñ¡¡á∩ Voice_Device ºáñáÑΓ Γ¿» ¼«ñÑ¼á: Voice_Device Zyxel ; default - Zyxel modems Voice_Device RCourier ; pπßß¬¿⌐ ¬πp∞Ñp ÉÑª¿¼ ßªáΓ¿∩ ñ½∩ greeting message ¿ ñ½∩ ºá»¿ßδóáÑ¼δσ Σá⌐½«ó ñ.í «ñ¿¡ ¿ Γ«Γ ªÑ. Åp¿ ¿ß»«½∞º«óá¡¿¿ ßªáΓ¿∩ ½πτΦÑ, τÑ¼ ADPCM-2, ¡Ñ«íσ«ñ¿¼á fifo ¿ lock_baud ¡Ñ ¼Ñ¡ÑÑ 57600. ÄΓ½¿τ¿∩ «Γ páí«Γδ ß Zyxel: 1) ¼«ñÑ¼ ¡Ñ »p«¿ºó«ñ¿Γ beep »«ß½Ñ »p«¿úpδóá¡¿∩ greeting message, Γá¬ τΓ« úπñ«¬ ñ.íδΓ∞ "ó ß«ßΓáóÑ" »p¿óÑΓßΓó¿∩ 2) »ÑpÑ¼Ñ¡¡á∩ Voice_Silence_Level ñ½∩ φΓ«ú« ¼«ñÑ¼á φΓ« ¡Ñ¬¿⌐ "»«p«ú Γ¿Φ¿¡δ" ¿ ¼«ªÑΓ íδΓ∞ «Γ 0 ñ« 32000. ÉÑ¬«¼Ñ¡ñπÑ¼á∩ óÑ½¿τ¿¡á 100. 3) pÑª¿¼δ ßªáΓ¿∩ ¡áñ« ºápá¡ÑÑ »p«»¿ßáΓ∞ ó pÑú¿ßΓpδ ¼«ñÑ¼á. ìá»p¿¼Ñp, ñ½∩ ADPCM-2: AT+X17=0 AT+X18=0 ¿ ºá»¿ßáΓ∞ φΓ« ó profile ¼«ñÑ¼á (AT&W). ôΓ¿½¿Γá vcnvtrcd.exe (vcnvtrc.exe ñ½∩ os/2) - φΓ« »ÑpÑñÑ½á¡¡á∩ vcnvt.exe «Γ Zyxel. àÑ ¼«ª¡« ¿ß»«½∞º«óáΓ∞ ñ½∩ ¬«¡óÑpΓ¿p«óá¡¿∩ »p¿¡∩Γδσ ú«½«ß«óδσ (.ZYX) Σá⌐½«ó ó .VOC ñ½∩ »p«¿úpδóá¡¿∩ τÑpÑº Sblaster. ôΓ¿½¿Γδ - ß¼. ó Σá⌐½φσÑ t-mail (vcnvt.rar). Æπ½ºá zyv.exe Γá¬ªÑ íπñÑΓ óß¬«pÑ áñá»Γ¿p«óá¡á. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2508 ========================= Compiled by Watcom C v10.0 -------------------------- % OS/2: Ä»Γ¿¼¿ºáµ¿∩ óδó«ñá ¡á φ¬pá¡, ΓÑ»Ñp∞ Output=Memory páí«ΓáÑΓ ¬á¬ ß½ÑñπÑΓ (ó Γ.τ. ó PM «¬¡Ñ). ! ÅÑpÑ¼Ñ¡¡á∩ Ignore_MsgTimestamp (Yes/No, default - No) íπñπτ¿ πßΓá¡«ó½Ñ¡á ó 'Yes' ºáßΓáó½∩ÑΓ »½ÑóáΓ∞ ¡á ¿º¼Ñ¡Ñ¡¿∩ timestamps »¿ßÑ¼. ÄΓß½Ñª¿óáÑΓß∩ Γ«½∞¬« ¿º¼Ñ¡Ñ¡¿Ñ páº¼Ñp«ó »¿ßÑ¼. % ä«»πßΓ¿¼« ¿ß»«½∞º«óáΓ∞ »«ñßΓá¡«ó¬¿ (ºáñá¡¡δÑ define, %SETVAR%) ó ¬«¡ßΓpπ¬µ¿∩σ Include (ó t-mail.ctl, subst.lst) Åp¿¼Ñp: (t-mail.ctl) Define TPATH d:\bbs\t-mail ... Include TPATH\my_pers.ctl ... ! ä½∩ DOS óÑpß¿¿: ñ«íáó½Ñ¡ «ípáí«Γτ¿¬ ¬p¿Γ¿τÑß¬¿σ «Φ¿í«¬. àú« »«óÑñÑ¡¿Ñ ºáñáÑΓß∩ »ÑpÑ¼Ñ¡¡«⌐ Dos_Critical_Errors ó t-mail.ctl: Dos_Critical_Errors No - «ípáí«Γτ¿¬ ¡Ñ πßΓá¡«ó½Ñ¡ (default) Abort - áóáp¿⌐¡δ⌐ óδσ«ñ ß errorlevel 4 Ignore - «Φ¿í¬¿ ¿ú¡«p¿pπεΓß∩ Exit - «Φ¿í¬á ¿ú¡«p¿pπÑΓß∩, ¡« t-mail ¡«p¼á½∞¡« ºáóÑpΦáÑΓ páí«Γπ ß errorlevel 4 ¼á¬ß¿¼á½∞¡« íδßΓp« Retry - t-mail 10 páº »δΓáÑΓß∩ »«óΓ«p¿Γ∞ ºá»p«ß ¬ DOS, óδºóáóΦ¿⌐ «Φ¿í¬π, ¿ ó ß½πτáÑ ¡Ñπñáτ¿ φ¬ßΓpÑ¡¡δ⌐ óδσ«ñ ß errorlevel 4 »p¿¼Ñτá¡¿Ñ: ¥¬ßΓpÑ¡¡δ⌐ óδσ«ñ - φΓ« ¡Ñ¼Ññ½Ñ¡¡δ⌐ óδσ«ñ íÑº ºá»¿ß¿ ó ½«úÑ, íÑº ß«σpá¡Ñ¡¿∩ ¬ápΓδ »á¼∩Γ¿. ƒ pÑ¬«¼Ñ¡ñπε ¿ß»«½∞º«óáΓ∞ º¡áτÑ¡¿Ñ Retry. é ß½«ª¡δσ áóΓ«»¿½«Γ¡δσ ß½πτá∩σ ½πτΦÑ Abort, ñ½∩ ß¿ßΓÑ¼ "»«ñ pπ¬«⌐" ½πτΦÑ Exit, á ñ½∩ ½εí¿ΓÑ½Ñ⌐ p¿ß¬«óáΓ∞ - Ignore. # Åp«í½Ñ¼á ß Recent sessisons history (Alt-I). % æ¡∩Γ« «úpá¡¿τÑ¡¿Ñ ¡á ¬«½¿τÑßΓó« »páó¿½ Dial translation. % ä«páí«Γá¡á Γπ½ºá FilNDX. ÆÑ»Ñp∞ «¡á »«ºó«½∩ÑΓ ºáñáΓ∞ ó ¬áτÑßΓóÑ »ápá¼ÑΓpá ß»¿ß«¬ ¬áΓá½«ú«ó, ¬«Γ«pδÑ íπñπΓ »p«¿¡ñÑ¬ß¿p«óá¡δ: FileNdx utility v1.1 (C)1995 Andy Elkin. Purpose: For creating requestable file areas index for T-Mail. Syntax: FileNdx [switches] directory [[directory] ...] or: FileNdx [switches] @directoryList Switches -Q quite mode, -S recurse subdirectories, -O<filename> output index name. Directory list is an ASCII file with list of directories to be indexed. é ß»¿ß¬Ñ ¬áªñδ⌐ ¬áΓá½«ú ñ.í. ºáñá¡ ß ¡«ó«⌐ ßΓp«¬¿. % Ma¬p«ß *A ñ½∩ Extern Mailers ¡á óδσ«ñ¡δσ ºó«¡¬áσ. # Keymacro <Alt-K> »«τ¿¡Ñ¡«. # ÆÑ»Ñp∞ ¡Ñ ¡áñ« ßΓáó¿Γ∞ áΓp¿íπΓ r/o ¡á t-mail.exe »«ñ DesqView ñ½∩ multiline. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2509 ========================= # ô»áñÑ¡¿Ñ os/2 óÑpß¿¿ »p¿ óσñ«¡«¼ yoohoo ¬«úñá ºó«¡¿Γ unlisted node ¿ß»«½∞ºπ∩ ß«ΣΓ¿¡π Yupie!. ! ÅÑpÑ¼Ñ¡¡á∩ T-serverNotify ºáñáÑΓ áñpÑß, ¡á ¬«Γ«pδ⌐ íπñÑΓ Σ«p¼¿p«óáΓ∞ß∩ ¬«»¿∩ «ΓτÑΓá « páí«ΓÑ t-Server (ñ½∩ ºáñá¡¿∩ exec). (t-mail.ctl) T-serverNotify 5030/124.1023 ! Process Voice. Å«ñ«í¡« Process Fax (ß¿¡Γá¬ß¿ß á¡á½«ú¿τÑ¡). çá»πß¬áÑΓß∩ »«ß½Ñ ºá»¿ß¿ ú«½«ß«ó«ú« ß««íΘÑ¡¿∩. % ìÑß¬«½∞¬« »«-ñpπú«¼π ¿ß»«½¡∩εΓß∩ »p«µÑßßδ. êσ ¼«ªÑΓ íδΓ∞ ¡Ñß¬«½∞¬«, »«ñóÑΦÑ¡¡δσ ¡á «ñ¿¡á¬«óπε ¼áß¬π ¿½¿ ¬½ετ. ß½«ó«. ÄΓpáíáΓδóáεΓß∩ »«ß½Ññ«óáΓÑ½∞¡«, ¬á¬ «¡¿ »ÑpÑτ¿ß½Ñ¡δ ó t-mail.ctl. Åp¿¼Ñp (t-mail.ctl) Process Arcmail Create arcmail.t-m Process Arcmail arcmail.bat Process *.arj goarj.exe Process *.arj goarj1.exe èp«¼Ñ Γ«ú«, ¼«ª¡« ¿ß»«½∞º«óáΓ∞ ¼áß¬π *.REQ (pá¡ÑÑ «¡á íδ½á ºá»pÑΘÑ¡á). àÑ ¿ß»«½∞º«óá¡¿Ñ ¡¿¬á¬ ¡Ñ ßó∩ºá¡« ß «ípáí«Γ¬«⌐ Freqs. % Å«ßδ½áÑΓß∩ ß¡áτá½á ß«ñÑpª¿¼«Ñ default filebox, á »«Γ«¼ Σá⌐½δ ¿º ß»¿ß¬á tobesent.$$$ % îÑΓ«ñ ¿º¼Ñ¡Ñ¡¿∩ µóÑΓ«ó »«ßpÑñßΓó«¼ »áΓτÑ¡¿∩ .EXE Σá⌐½«ó ßτ¿ΓáÑΓß∩ ΓÑ»Ñp∞ πßΓápÑóΦ¿¼. ÉÑΦÑ¡« »«ññÑpª¿óáΓ∞ Γ«½∞¬« t-mail.clr. ! CRC-32 ó ƒ¡πßÑ. éδí¿páÑ¼δ⌐ ¼ÑΓ«ñ »«ñτ¿¡∩ÑΓß∩ »ÑpÑ¼Ñ¡¡«⌐ ZCRC32 (Always/Never/Smart). # Åp«í½Ñ¼á ß ºáú«½«ó¬«¼ »á¬ÑΓá »p¿ ¿ß»«½∞«óá¡¿¿ Share AKA. % Å¿ß∞¼á ¡á τπª¿σ »«¿¡Γ«ó ß áΓΓp¿íπΓ«¼ direct ΓÑ»Ñp∞ ó ½εí«¼ ß½πτáÑ «Γ»páó½∩εΓß∩ ¡á»p∩¼πε (pá¡∞ΦÑ - Γ«½∞¬« Ñß½¿ ΓÑ½. íδ½ ¿ºóÑßΓÑ¡, ¿¡áτÑ - ¡á Ñú« í«ßßá) % ÅÑpÑ¼Ñ¡¡á∩ Mail_Hour πípá¡á. ! ì«óá∩ »ÑpÑ¼Ñ¡¡á∩ ó t-mail.ctl: Default_OH. çáñáÑΓ (ñ½∩ ß»¿ß¬á áñpÑß«ó) ¿¡ΓÑpóá½ ópÑ¼Ñ¡¿, ¬«Γ«pδ⌐ ßτ¿ΓáÑΓß∩ ópÑ¼Ñ¡Ñ¼, ¬«úñá πº½δ ¿º ß»¿ß¬á »« π¼«½τá¡¿ε »p¿¡¿¼áεΓ óσ«ñ¡δÑ ºó«¡¬¿ (Open Hours interval). ù¿ß½« ¬«¡ßΓpπ¬µ¿⌐ Default_OH ¡Ñ «úpá¡¿τÑ¡«. çáñá¡¿∩ Default_OH »ÑpÑ¬pδóáεΓß∩ Txy Σ½áúá¼¿, Σ½áú«¼ CM, ¿ ñá¡¡δ¼¿ ¿º subst.lst. æ¿¡Γá¬ß¿ß: Default_OH [<address list>] <time interval> Åp¿¼Ñpδ (t-mail.ctl): define HUBs /6 /108 /35 /27 Default_OH [2:*/*.*] 6:30-7:30 ; 2nd zone mail hour Default_OH [1:*/*.*] 13:00-14:00 ; 1st zone mail hour Default_OH [2:5030/15.*] 2:00-8:00 ; I love my points Default_OH [HUBs 5030/124 ZYX !5030/132] 4:00-5:00,7:00-9:00,0.2:00-0.4:00 »p¿¼Ñτá¡¿Ñ: é ¬«¡ßΓpπ¬µ¿∩σ <address list> ºñÑß∞ ¡Ñ½∞º∩ ¿ß»«½∞º«óáΓ∞ Σ½áú¿, ºáñáóáÑ¼δÑ ó subst.lst. ö½áú¿, ºáñá¡¡δÑ ó ¡«ñ½¿ßΓÑ, ¿ß»«½∞º«óáΓ∞ ¼«ª¡«. Åp¿ »«ñßΓá¡«ó¬Ñ ¿¡ΓÑpóá½á t-mail ¡áσ«ñ¿Γ 1-⌐ »«ñσ«ñ∩Θ¿⌐ ß»¿ß«¬ <addr list>, »«ß½ÑñπεΘ¿Ñ - ¿ú¡«p¿pπεΓß∩. # Åp«í½Ñ¼á ß Hubrouting % ö½áú Flag_Noscan ¼«ª¡« ºáñáóáΓ∞ ¼áß¬«⌐: (t-mail.ctl) Flag_NoScan nosca*.t-m ! ÅÑpÑ¼Ñ¡¡á∩ Sort_Queue ó t-mail.ctl. O»pÑñÑ½∩ÑΓ »«p∩ñ«¬ ß«pΓ¿p«ó¬¿ «τÑpÑñ¿. æ¿¡Γá¬ß¿ß: Sort_Queue Address|Size|Mail|Files [Reverse] ç¡áτÑ¡¿Ñ »« π¼«½τá¡¿ε - Address Åp¿¼Ñp (t-mail.ctl) Sort_Queue Size Reverse ; # é«ßßΓá¡«ó½Ñ¡¿Ñ FREQs ó Bink mode. % çá»pÑΓ (»«½¡δ⌐) »p¿Ñ¼á óσ. ºó«¡¬«ó »p¿ crash-poll. # é«ßßΓá¡«ó½Ñ¡¿Ñ Poll »p¿ Crash-Poll. ! ÅÑpÑ¼Ñ¡¡á∩ File_Boxes_Scan ºáñáÑΓ pÑª¿¼ ß¬á¡¿p«óá¡¿∩ File Boxes: File_Boxes_Scan Normal | Full Normal - file boxes ß¬á¡¿pπεΓß∩ Γ«½∞¬« »p¿ »ÑpÑ»á¬«ó¬Ñ ¿½¿ »p¿ ß«ºñá¡¿¿ ¬áΓá½«úá. öá⌐½δ tobesent.$$$ ¡Ñ ß¬á¡¿pπεΓß∩ Full - »«½¡«Ñ ß¬á¡¿p«óá¡¿Ñ »p¿ ¬áªñ«¼ µ¿¬½Ñ «ª¿ñá¡¿∩. öá⌐½δ tobesnt.$$$ ß¬á¡¿pπ∩Γß∩. ç¡áτÑ¡¿Ñ »« π¼«½τá¡¿ε: Normal. ÅpÑñπ»pÑªñÑ¡¿Ñ: º¡áτÑ¡¿Ñ Full ¼«ªÑΓ ßÑp∞Ñº¡« πóÑ½¿τ¿Γ∞ ópÑ¼∩ ß¬á¡¿p«óá¡¿∩ «τÑpÑñ¿, Ñß½¿ ¿ß»«½∞ºπεΓß∩ Σá⌐½δ tobesent.$$$. % è«½¿τÑßΓó« ÇèÇ πóÑ½¿τÑ¡« ñ« 100. ê ßó«¿σ, ¿ á¡á½¿º¿pπÑ¼δσ »p¿ EMSI handshake. ! Process Nodelist (t-mail.ctl). çá»πß¬áÑΓß∩, Ñß½¿ ¡Ñó«º¼«ª¡« «Γ¬pδΓ∞ ¿¡ñÑ¬ß¡. Σá⌐½, ¬«Γ«pδ⌐ ñÑ½áÑΓ TNC, »p¿ ¿º¼Ñ¡Ñ¡¿¿ timestamp ½εí«ú« ¿º ¡«ñ½¿ßΓ«ó, ¿½¿ »p¿ ¿ßτÑº¡«óÑ¡¿¿ ¡«ñ½¿ßΓá. Åp¿¼Ñp: (t-mail.ctl) Process Nodelist c:\t-mail\tnc.exe -c ; Compile nodelist % ÅÑpÑñáτá ßΓáΓπßá Imm «Γ /Master ¬ /Slave »p¿ π»á¬«ó¬Ñ »¿ßÑ¼ ß áΓΓp¿í. Imm (ó í¿¡¬¼«ñÑ - »p¿ ¡á½¿τ¿¿ .ILO/.IUT). àß½¿ Crash_As_Imm Yes, Γ« ΓÑ ªÑ ñÑ⌐ßΓó¿∩ ñ½∩ Crash/.CUT/.CLO % ì«óá∩ ó«º¼«ª¡«ßΓ∞ »p¿ ºáñá¡¿¿ úpπ»» áñpÑß«ó ó <addr list>. Å«ºó«½∩ÑΓ «»pÑñÑ½¿Γ∞ µÑ½¿¬«¼ πº½δ, σáí«¼ ¬«Γ«pδσ ∩ó½∩ÑΓß∩ ºáñáóáÑ¼δ⌐, ¡á»p¿¼Ñp: (events.ctl) Mail _5030/6 5030/124 Äº¡áτáÑΓ: pπΓ¿Γ∞ »«τΓπ ñ½∩ óßÑσ πº½«ó, σáí«¼ ¬«Γ«pδσ ∩ó½∩ÑΓß∩ 5030/6 ¡á πºÑ½ 5030/124. Direct _5030/27 Äº¡áτáÑΓ: «Γ»páó½∩Γ∞ ¡á»p∩¼πε »«τΓπ ñ½∩ óßÑσ πº½«ó, σáí«¼ ¬«Γ«pδσ ∩ó½∩ÑΓß∩ 5030/27. Syntax: _<hub address> »p¿¼Ñτá¡¿Ñ: ôºÑ½-σáí óσ«ñ¿Γ ó φΓ« ¼¡«ªÑßΓó«, Γ.Ñ. ∩ó½∩ÑΓß∩ ßó«¿¼ σáí«¼. ä½∩ Ñú« ¿ß¬½ετÑ¡¿∩ pÑ¬«¼Ñ¡ñπÑΓß∩ »p¿¼Ñ¡∩Γ∞ ¿ß¬½ετÑ¡¿Ñ, ¡á»p¿¼Ñp: _5030/6 !5030/6. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2596 ========================= # Åp«í½Ñ¼á ß Extern_Mail # ìÑ páí«Γá½á ¬«¡ßΓpπ¬µ¿∩ Mail _<Hub> _<Hub> <address> # ÅpÑñ«ΓópáΘÑ¡á π»á¬«ó¬á echomail »¿ßÑ¼ »«»áóΦ¿σ ó netmail % ä«íáó½Ñ¡á ß¬«p«ßΓ∞ ¬«¡¡Ñ¬Γá 57600. æ««Γó ½¿¡Ñ⌐¬¿ »ÑpÑ¼Ñ¡¡δσ Z* páßΦ¿pÑ¡δ. Connect_57600 CONNECT 57600 - ó modem.ctl/t-mail.ctl # é«ßßΓá¡«ó½Ñ¡¿Ñ poll »p¿ «ípδóÑ »p¿ ¿¡¿µ¿á½¿ºáµ¿¿ Janus ßÑßß¿¿ # ìÑ»páó¿½∞¡«Ñ ó«ßßΓ. FREQ ó bink mode % é«º¼«ª¡«ßΓ∞ ºáñáóáΓ∞ ¿¡óÑpß¡δÑ Σ½áú¿, Γ.Ñ. ¿¡óÑpΓ¿p«óáΓ∞ Σ½áú¿ ó subst.lst. ä½á φΓ«ú« ¿ß»«½∞ºπÑΓß∩ ß¿¼ó«½ '~' »ÑpÑñ Σ½áú«¼. Åp¿¼Ñp: (subst.lst) 5030/15 Flags HST,~ZYX »p« φΓ«¼ »p¿íáó½∩ÑΓß∩ Σ½áú HST ¿ á¡¡π½¿pπÑΓß∩ ZYX, ºáñá¡¡δ⌐ ó ¡«ñ½¿ßΓÑ. »p¿¼Ñτá¡¿Ñ: ¿¡óÑpΓ¿pπÑΓß∩ Γ«½∞¬« "primary flag", Γ.Ñ, ¡á»p¿¼Ñp: - ºáñá¡¿Ñ ZYX óδºδóáÑΓ «ñ¡«ópÑ¼Ñ¡¡« ºáñá¡¿Ñ V32B, V32, V42B, V42 - «Γ¼Ñ¡á ZYX óδºδóáÑΓ «Γ¼Ñ¡π Γ«½∞¬« ZYX, óßÑ "»«p«ªñÑ¡¡δÑ" «ßΓáεΓß∩. # ÅÑpÑπßΓá¡«ó¬á Zmodem »ápá¼ÑΓp«ó »« ¬«¼á¡ñÑ SET ó subst.lst. ! è½ετ -DP »p¿ ºá»πß¬Ñ t-mail.exe: íπñÑΓ ó log ¿ ¡á φ¬pá¡ óδó«ñ¿Γ∞ß∩ «Γ½áñ«τ¡á∩ ¿¡Σ«p¼áµ¿∩ »p¿ π»á¬«ó¬Ñ ¬áªñ«ú« »¿ß∞¼á (¬πñá »á¬πÑΓß∩). #$ Process Voice («Φ¿í¬á »p¿ ºá»πß¬Ñ) %$ Åápá¼ÑΓp ñ½∩ Process Voice ¿ Process Fax ÆàÅàÉ£ »p«ßΓ« ¿¼∩ Σá⌐½á, íÑº »πΓ¿. ê¼∩ Σá⌐½á ΓÑ»Ñp∞: MMddHHmm ñ½∩ π»p«ΘÑ¡¿∩ ß«pΓ¿p«ó¬¿. # Åp«í½Ñ¼á ß Σá⌐½á¼¿ ó \ATTEMPTS ! ÅÑpÑ¼Ñ¡¡á∩ Indirect_points (YES/no) ºáñáÑΓ, íπñÑΓ ½¿ »¿ß∞¼« ß áΓΓp. Direct áñpÑß«óá¡¡«Ñ ¡á unpublished point ºápπτÑ¡« ¡á Ñú« í«ßßá. Default - Yes, Γ« ÑßΓ∞ íπñÑΓ, Ñß½¿ No - Γ« óßÑ »¿ß∞¼á ß Direct óßÑúñá «Γßδ½áεΓß∩ ¡á»p∩¼πε. # Åp«í½Ñ¼á ß ºáúp∩º¡Ñ¡¿Ñ¼ Janus chat ¿ ß Ñú« "ßá¼«ó«ºíπªñÑ¡¿Ñ¼". # Å«τ¿¡Ñ¡á ¬«¡ßΓpπ¬µ¿∩ Γ¿»á Key <F4> Repack *A (»ÑpÑ»á¬«ó¬á ñ½∩ ΓÑ¬πΘÑú« ó «τÑpÑñ¿) # çá½ÑΓ »p¿ τΓÑ¡¿¿ subst.lst ß ¼¡«ú¿¼¿ »ÑpÑ¡«ßá¼¿/σ¿ññÑ¡á¼¿. ? ôípá¡á »ÑpÑ¼Ñ¡¡á∩ ZFlushSize % ä½∩ »p«µÑßß«ó, ºá»πß¬áÑ¼δσ »p¿ Σ«póápñÑ ó mailbox, á Γá¬ªÑ ñ½∩ ºáñáóáÑ¼«¼ ñ¿pÑ¬Γ¿ó«⌐ Exec ó events.ctl ñ«»πßΓ¿¼δ "»p«µÑßß«óδÑ" ¬½ετÑóδÑ ß½«óá: KeyMacro, Poll, Drop, Nothing, Set, Control, Exit, Creat, Kill. îá¬p«ßδ, ¬«Γ«p ¼«ª¡« »p¿ φΓ«¼ ¿ß»«½∞º«óáΓ∞ Γá¬¿Ñ ªÑ, ¬á¬ ¿ ñ½∩ Process_Flag. ! ÅÑpÑ¼Ñ¡¡á∩ Freq_Note. çáñáÑΓ ¿¼∩ ΓÑ¬ßΓ«ó«ú« Σá⌐½á, ¬«Γ«pδ⌐ íπñÑΓ ñ«íáó½∩Γ∞ß∩ ¬ »¿ß∞¼π-»«ñΓóÑpªñÑ¡¿ε ñ½∩ Freq. Å«ñ«í¡« Γ«¼π, ¬á¬ freq_policy ñ«íáó½∩ÑΓß∩ ¬ »¿ß∞¼π « ¡Ñπñáτ¡«¼ Freq. ======================= êº¼Ñ¡Ñ¡¿∩ ó t-mail ver 2597 ========================= # Åp«í½Ñ¼á ß EMSI Γá⌐¼áπΓ«¼. # é«º¼«ª¡á∩ »p¿τ¿¡á π»áñá¡¿⌐. «ß/2 # »p«í½Ñ¼á "close(creat)" -> sharing violation # π»á¬«ó¬á Direct »¿ßÑ¼ (Fileattached) - ¡Ñ óßÑúñá »á¬«óá½ß∩ ΓÑ¬ßΓ »¿ß∞¼á. # »«»páó½Ñ¡δ «óÑp½Ñ¿ ó dos óÑpß¿¿ ñ½∩ ½πτΦÑú« EMSI (?). # æ½¿Φ¬«¼ τáßΓá∩ ºá»¿ß∞ queue.tmp ¼áßΓÑp«¼ # ΓÑp¼¿¡á½, scroll »«ß½Ññ¡Ñ⌐ ßΓp«¬¿ ¡Ñ ó«ópÑ¼∩ # Freq limits (dayly, weekly, monthly) # çáΓδ¬ ó Janus (¡áτá½« »p¿Ñ¼á Σá⌐½á) $! ì«óδ⌐ Process: Process ZPause. Éáí«ΓáÑΓ Γ«½∞¬« ó ¬«¼¼. óÑpß¿¿, Γ«½∞¬« »p¿ ¿ß»«½∞º«óá¡¿¿ Zmodem ¿ Γ«½∞¬« ñ½∩ »ápδ t-mail - t-mail. êñÑ∩: Åp¿ páºó«p«ΓÑ Zmodem ßÑßß¿¿ t-mail, «ΓóÑτáεΦ¿⌐ ¡á ºó«¡«¬, ºá»πß¬áÑΓ Process ZPause, Ñß½¿ Ñú« ºá»πß¬ íδ½ ºá»p«ΦÑ¡ ºó«¡∩ΘÑ⌐ ßΓ«p«¡«⌐. çó«¡∩Θ¿⌐ t-mail «ª¿ñáÑΓ »p¿ φΓ«¼ ºáóÑpΦÑ¡¿∩ »p«µÑßßá ß Γ«⌐ ßΓ«p«¡δ, á¡á½¿º¿pπ∩ óσ«ñ¡«⌐ »«Γ«¬ ¿ ß½Ññ∩ ºá CARRIER. ìá "ßÑpóÑp¡«⌐" ßΓ«p«¡Ñ (»p¿¡¿¼áεΘ¿⌐ ºó«¡«¬) ñ. í. ºáñá¡δ: (t-mail.ctl) 1) ZPause - ¼á¬ß¿¼á½∞¡«Ñ ópÑ¼∩ ó ßÑ¬π¡ñáσ, ¬«Γ«p«Ñ "¬½¿Ñ¡Γ" (ºó«¡∩Θ¿⌐) íπñÑΓ «ª¿ñáΓ∞ ºáóÑpΦÑ¡¿∩ »p«µÑßßá (¿¡áτÑ - «ípδó) 2) Process ZPause - Γ«, τΓ« ºá»πßΓ¿Γß∩ »p¿ páºó«p«ΓÑ zmodem ìá "¬½¿Ñ¡Γß¬«⌐" ßΓ«p«¡Ñ ñ½∩ φΓ«ú« ¡Ñ«íσ«ñ¿¼« «»pÑñÑ½¿Γ∞ ñ½∩ ß¿ßΓÑ¼δ-ßÑpóÑpá Σ½áú ZPause (subst.lst). îá¬ß. ópÑ¼∩ «ª¿ñá¡¿∩ «úpá¡¿τÑ¡« - 20 ¼¿¡ (1200 ßÑ¬). Åp¿¼Ñp: ß¿ßΓÑ¼á-ßÑpóÑp -------------- (t-mail.ctl) Zpause 200 ; max timeout 200 sec Process ZPause do_some.bat *T ; process ß¿ßΓÑ¼á-¬½¿Ñ¡Γ -------------- (subst.lst) 2:5030/15.20 Flags NoJanus,Zpause ; Force Zmodem and ; Process Pause request ======================= Changes in t-mail ver 2598 ========================= # 317-th symbol while msg forwarded from mailbox (if a message contents one long string) # removing old .HFR flags (while repacking ALL mail) # Warning if subst.lst not found. # Better events scanning # TNC: Opening tnc.ctl in readonly mode # Attach/2: While copying files into filebox open them in readonly mode # Attach: address "50" WAS interpreted as mynode.50. Now as mynet/50.0 # Restoring some defaults in t-mail.ctl for commented parameters while re-reading t-mail.ctl # Problems with handling messages larger then 32kBytes # Killing attached FAX file (was) # OS/2 trap if manual (Ctrl-X) skipping of file reception, if filesize >1Mb. ! Directive INCLUDE is available in EVENTS.CTL file. Rules are the same as for Subst.lst file. # Fixed problem in Janus code (end of file ack retry) % Variable Old_Style_Addr is obsolete. ! Variable Optimal_Msg_Fill (Yes/No, default No). When t-mail creates messages in netmail folder, usually it finds maximal number of message and places new message with number max+1; If optimal_msg_fill = Yes, then first available number will be found. This is only for netmail folder, NOT for mailbox operations. ! Two new modificators for event definitions in events.ctl file. 1) Start Defines that this event must be executed at start of t-mail (only). Time intervals are not meaningful there. Example (events.ctl): Start Poll 5030/124 Start SET answer_ring=1 2) Relative Adds current time (of the moment of reading events.ctl file) to all time marks for this event. Example Relative Hold All 0:10-4:00 if current time is 3:00 this string will be equal to: Hold All 3:10-7:00 ======================= Changes in t-mail ver 2599.1 ======================== % Maximal number of Process and Process_Flag definitions are not limited now. % Maximal number of Mailboxes is not limited now. # Problem with loosing phone number, manually entered for Crash-poll, after broken session. # Flags weren't active for unpublished systems. ! Switch -O<size in kbytes> for additional overlay buffer size. <size> is from 0 (default) to 32 (32kbytes). DOS only. # Problem with determining disk free space has been fixed. ! Variable Crash_Poll_Pause (Yes/no) defines fact of 1-second pause between crash-poll calls. Default = Yes. % Overlay structure is dramatically improved. Result is: memory, needed for t-mail is reduced to 320k for /commercial version. % Limit for "total_messages" increased to 32600 for OS.2 version, and to 16300 for DOS and NT versions. ! Switch -NODASH. Useful for strange modems uderstanding '-' as 'w'. All symbols '-' will be changed to ' '. ! Variable Log_Buffer sets size of log buffer in kBytes. Normally T-mail puts every log line onto disk opening and closing log file. If Log_buffer greater then 0 t-mail keeps log lines in memory and puts portions of log greater then one line. Works better with GREEN systems and when log file placed on network drive. Valid values: from 0 (buffing disabled) to 32 (32kB buffer). Example: (t-mail.ctl) Log s:\logs\t-line1.log ; Network drive Log_Buffer 10 ; 10 kB, log is buffered ! Variable SendOnly_DiskSpace sets minimal space (in kBytes) in FILES (or Files_Unsecured) directory for receiving files. If free space is less then defined, t-mail attempts to establish send-only session. Default is 0 == checking disabled. % Variable Yoohoo_Enable (= No) disables yoohoo handshake globally (not only for answering). ======================= Changes in t-mail ver 2599.B ======================== % First public version for NT. Warning: no natioanl language support in this version. ======================= Changes in t-mail ver 2599.D ======================== % TNC modified. If nodelist mask in tnc.ctl is set with .999 extension, latest nodelist with three-digits extension will be choosed. Previously, used file with largest extension. % "Undialable" status for a node. It could be set automatically by t-mail in situation (only for outgoing calls) when no any addresses presented in remote's EMSI (and added due to SHARE commands in eventlist) match with the called address in the queue. This action is always logged. This status can be removed manually (ONLY) by pressing 'U' for a node in the queue. ! New variable in T-mail.ctl: Loading_External_String. It defines string to be sent (to comport) while loading External Mailer. No default (empty). For compatibility with 2500 must be set as shown below: (t-mail.ctl) Loading_External_string Loading external mailer... ; % Directive 'External' in subst.lst (only!) is changed to 'Local'. Old syntax will be also kept for a couple of versions. !$ Second parameter added to Process Fax (running when Fax received) - remote FAX ID (if it was received from sender). ======================= Changes in t-mail ver 2599.E ======================== % Zone and points numbers are limited now ONLY for operations with defualt fileboxes. For bink mode, and plain arcmail-attach they may be from 1 to 32767. % Enhanced syntax for Process ... Exit <errorlevel> and for Process_Flag ... Exit <errorlevel> (including Process BBS Exit ...). It is now possible to define a batch file (.BAT or .CMD) which may be chained with t-mail.exe by errorlevel. T-mail creates the file EXITxx.BAT (or .CMD) in t-mail.exe's directory, where 'xx' represents the two-digit, hexadecimal number of the task. Default is 1, which will cause the file EXIT01.BAT to be created. This file will contain a single line, the contents of which are taken from the 'Process' command FOLLOWING the errorlevel. Example: Process BBS Exit 99 a_bbs.exe -d -p*P -l*L -y*N -b*B and then connection is "CONNECT 14400/NONE" with port 3 locked at 57600, the contents of EXIT01.BAT will be: a_bbs.exe -d -p3 -l57600 -y0 -b14400 if you need this feature, you will probably already be familiar with this method of operation. You may create a chain in your main batch file, such as: :start t-mail.exe if errorlevel 99 call exit01.bat goto start and have a 'real exit' to external programs. % All dialog boxes have been improved (small windows appearing while pressed Alt-D, Alt-=, Alt-Z, and others). It is possible to edit the entering string using keys: <Del>, <Backspace>, <Left>, <Right>, <End>, <Home>. History (up to 25 previously entered strings) are also available by using the <Up> and <Down> keys. !$ OS/2 and NT commercial versions only: New Keyword for Process, Process_Flag actions, for Key, Exec directive in events.ctl: Sound. Plays sound file. Examples: (t-mail.ctl) Key <alt-F10> Sound test.wav Process_Flag snd.flg Sound file.wav Process *.EXE Sound warning.wav (events.ctl) Exec Sound morning.wav 9:00 MM types allowed in your multimedia extension are avalable. For Os/2 and SB: .WAV and .VOC, for NT - .WAV. !$ OS/2 and NT commercial versions only: SoundOf directives in t-mail.ctl have been improved. You may define the names of sound files instead of pattern definitions. Here is an example of sound section in t-mail.ctl: ;============================ T-Mail sound control =========================== ; ; Sound RCBSAEHDUT ; Sound yes/no/hex value ; ; C - Connect ; B - Begin session ; S - End session ; A - Abort transfer ; E - Error ; H - Human caller ; D - Chat ; U - Unpack mail ; R - Ring ; T - Tick ; SoundOf Connect c:\t-mail\connect.wav ; ; Modem connection SoundOf Begin c:\t-mail\begin.wav ; ; Begin sessoin SoundOf End c:\t-mail\end.wav ; ; End of session SoundOf Abort c:\t-mail\abort.wav ; ; Transfer aborted SoundOf Human c:\t-mail\human.wav ; ; Human Caller SoundOf Error c:\t-mail\error.wav ; ; Error (modem, fossil) SoundOf Chat c:\t-mail\chat.wav ; ; Chat SoundOf Unpack c:\t-mail\unpack.wav ; ; Unpacking mail SoundOf Ring c:\t-mail\ring.wav ; ; Ring SoundOf Tick c:\t-mail\tick.wav ; ; Simple 'tick' ; ; % Syntax for Process and Process_Flag directives has been improved. You may define several actions corresponded to Process or Process_Flag. Each action must start on a new line and must be preceded by '#' symbol. Examples (t-mail.ctl): Process_Flag flag.t-m Create busy.t-m # Sound snd1.wav # doproc.cmd -T -D # Sound end.wav # Kill busy.t-m Process Arcmail Sound arcmail.wav # Toss.bat # Scan.bat # Sound endtoss.wav # Repack All # Poll 5030/15 # Exit 99 It's not allowed to create chains for: Process Fax, Voice, FTS-1, BBS, Freq, Handshake_Timeout, Zpause and for Process_Flag ... Sleep. Allowed for: Process <mask>, Arcmail, Netmail, Tic, No_modem, Empty_Queue, Empty_fax_queue, Nodelist, Session. The old syntax is fully supported. Control macrodirective as well as Exit will terminate chain processing. ! Switch -NOPM for compatibility with TSHELL. % The number of Highlight directives in t-mail.ctl now is unlimited. %$ OS/2 and NT commercial versions only: Syntax for Highlight directives has been improved. New Syntax: Highlight <string to be highlighted> <hex attribute>[,<voice file name>] Voice file (if defined) will be played as well as the string being highlighted. Spaces between attribute digits and ',' and voice file name are not allowed. Examples (t-mail.ctl): Highlight Gates of Delirium 4e,d:\sounds\andy.wav Highlight 5030 40 ; w/o playing, old style Highlight Peter Laur 1f,d:\sounds\hello.wav Highlight Dmitry Osipov 0e,d:\sounds\pigs.wav % The variable Bink_mode has been removed. % I'm planning to remove support of TOBESENT.$$$ feature (scanning, sending contents, etc.) in the near future. For now t-mail does not scan tobesent.$$$ files when building the queue, but sends it's contents as it was in previous versions. % It is possible to use t-mail in normal mode (arcmail-attach + fileboxes) with a bink style outbound. New variable Bink_Outbound defines the base directory for bink-style outbound. Example: (t-mail.ctl) Bink_Outbound d:\t-mail\files\outbound If defined, t-mail will scan this directory and all outbound.* directories while building the mail queue. (And send this stuff of'course). * warning: The creation of polls, mail packeting, freqs, mailboxes and so on is the same as in arcmail-atttach mode. This means that t-mail NEVER adds records to bink-style files. If a poll is created, this means empty message which will be packed in the normal way, etc. Please don't forget to change Scan_Circle to a reasonable value (I would recommend commenting this variable and using the default value in t-mail.ctl). ! Two variable defines how BUSY flags will be handled. Busy_Flags_Create - creation of busy flags during a session Busy_Flags_Scan - scanning busy flags before dialing and some queue entry modifications values for these variables: No - ignore flags Normal - use FD-style busy flags (default) Full - use FD-style as well as bink-style flags * warning: handling both types of flags requires more resources. !$ Busy flags for fax calls. They are placed in the flags\fax directory and are CRC-based. ======================= Changes in t-mail ver 2599.G ======================== % OS/2 and NT versions only. Flags definition improved. It is now possible to define and use system semaphores instead of flag-files on disk. You must define semaphores in the following manner: Process_Flag \SEM32\<semaphore name> <action> examples: Process_Flag \SEM32\arcmail.t-m toss.cmd Key <F2> Create \SEM32\arcmail.t-m Process Arcmail Create \SEM32\arcmail.t-m The syntax is identical to that used for normal flags, but if the flag name begins with \SEM32\ t-mail will assume that it must create/delete/scan the system semaphores instead of files on disk. % The syntax for Busy_FLags_Scan and Busy_Flags_Create has been extended. You may now define any combination for busy flags types - Bink (.BSY flags) Normal (FrontDoor-compatible) Semaphore (== sem) (System semaphores) OS/2 and NT versions only. or No (busy flags are not used) It is not recommended to use all three types of flags. Combinations such as "Semaphore Bink" or "Semaphore Normal" seem to be most convenient. Examples: (t-mail.ctl): Busy_FLags_Scan Normal Sem Bink Busy_Flags_Create Sem Bink % (Registered version only) Variables 'Serail_no' and 'Register_key' are obsolete. Thekey is kept in a file and it's name must be defined by the variable 'Keyfile' in t-mail.ctl. Example: (t-mail.ctl) [1] KeyFile t-m01005.key [2] KeyFile d:\private\keyfiles\t-m-1006.key ======================= Changes in t-mail ver 2599.H ======================== %$ Parameter Fax_Baud in t-mail.ctl limits the maximum fax, outgoing, baudrate for fax calls. Default 9600. Valid values: 14000, 12000, 9600, 7200, 4800 or 2400. %$ New keyword in the beginning of a faxgate message: Baud. Defines maximum fax baudrate for this fax message. T-mail will start to negotiate with remote fax machine from this baudrate. If not defined in the message body, Fax_Baud value will be used. % Variables ZBlockSize, ZTimeout, Zmincps, Zstartblk are obsolete. % Extended syntax for Connect_xxxx strings. New syntax is: Connect_xxxx <connect string> [, <zmaxblk> [,<zstartblk> [,<ztout> [,<zmincps>]]]] Here is an example of modem connection strings section in t-mail.ctl: ; ; Variable Modem string, MaxBlock, StartBlock, ZTimeout, MinCPS ;--------------------------------------------------------------------- ; Connect_300 CONNECT ;,512, 512, 10, 10 ; Connect_1200 CONNECT 1200 ;,1024, 512, 10, 20 ; Connect_2400 CONNECT 2400 ;,2048, 512, 10, 80 ; Connect_4800 CONNECT 4800 ;,2048, 512, 10, 100 ; Connect_7200 CONNECT 7200 ;,4096, 512, 10, 200 ; Connect_9600 CONNECT 9600 ;,4096, 512, 10, 200 ; Connect_12000 CONNECT 12000 ;,8192, 512, 10, 300 ; Connect_14400 CONNECT 14400 ;,8192, 512, 10, 400 ; Connect_16800 CONNECT 16800 ;,8192, 512, 10, 500 ; Connect_19200 CONNECT 19200 ;,8192, 512, 10, 600 ; Connect_21600 CONNECT 21600 ;,8192, 512, 10, 600 ; Connect_24000 CONNECT 24000 ;,8192, 512, 10, 600 ; Connect_26400 CONNECT 26400 ;,8192, 512, 10, 600 ; Connect_28800 CONNECT 28800 ;,8192, 512, 10, 600 ; Connect_31200 CONNECT 31200 ;,8192, 512, 10, 600 ; Connect_33600 CONNECT 33600 ;,8192, 512, 10, 600 ; Connect_38400 CONNECT 38400 ;,8192, 512, 10, 600 ; Connect_57600 CONNECT 57600 ;,8192, 512, 10, 600 ; Connect_64000 CONNECT 64000 ;,8192, 512, 10, 600 ; ======================= Changes in t-mail ver 2599.I ======================== % Up to 32 'Flag' variables may be defined in TNC.CTL file. All flags defined in TNC.CTL will be created after nodelist(s) processing. % Syntax for DEFINE directive has changed slightly for the use of hexadecimal codes. HEX codes used in the DEFINE directive, now must be preceeded by '\x' (instead of just '\'). Example (t-mail.ctl): Old: DEFINE SMTH \C5 New: DEFINE SMTH \xC5 ! Variable Max_Ring_Interval (t-mail.ctl) defines maximum delay (in seconds) between two incoming rings (words RING from the modem). It is meaningful only if Answer_Ring is not equal to 1. Default value is 7 seconds. % Obsolete variable EMSI_Nodes is removed. If you have it in t-mail.ctl you should change it to Accept_Nodes (according to t-mail.doc v.2500). !$ New keyword for Process, Process_Flag definitions, for Exec <...> constructions in events.ctl, external modem handlers, etc. : Script <script name> Reads and performs the script as defined in <script name>. Note: Scripts syntax is described below. Examples: (t-mail.ctl) External BUSY/0148 | Script busy.scr Process_Flag test.t-m Script test.scr (events.ctl) Exec Script tst.scr 4:00 (busy.scr) Exec Log Freepoll (to *A) was rejected ; Logging the fact Exec Drop \ ; Delete poll Warning: if a script called from within another script, the remainder of the first script will not be processed. !$ Before-session scripts. These are scripts which are executed immediately upon the establishment of a connection after dialing. You should define separate scripts for the systems in subst.lst: (subst.lst) <address> Script <script filename> example: 5030/124 phone 325-6242 time 0:0-24:00 # password temppass # box c:\boxes\124 # Script c:\t-mail\delta.scr # Dial AT&N0D If system called to 5030/124, script delta.scr will be executed after connection. !$ Script files are plain ASCII as are all of t-mail's control files. Each instruction in a script file must be on separate line, leading and trailing spaces are ignored. You may use comments, DEFINE directives and task markers ([<task_no>]) in the same manner as in t-mail.ctl. In the script files you may use instructions listed below: Timer <timer> Setting global script timeout timer. Default is 60 seconds from the beginning of script execution. If global timeout reached, script execution will be aborted. Set <value>=<parameter> Setting a t-mail.ctl parameter. Original value from t-mail.ctl will be restored after session. Exec <command> Running an external programm. Syntax is similar to Exec event and Process/Process_Flag. Goto <label> [<label2>] Goto command. <Label> must be defined in the script. Causes jump to the position in the script, pointed by <label> or <label2>, if <label2> is defined and the result of previous operation is meaningful and "not OK". If <label> and <label2> are both defined, then Previous operation Jump to <label> Jump to <label2> ("OK") ("not OK") Carrier if CD signal is high if NO CARRIER Wait <string> if <string> received if timeout reached Exec <command> if errorlevel was 0 errorlevel not 0 Address <list> if called address if not matched matched to <list> Baud <baudrate> if connection faster if connection speed or equal to <baudrate> less then <baudrate> Carrier Analysing CARRIER presence. Following GOTO instruction (with two labels defined) will cause conditional jump. Baud <baudrate> Comparing real connection baudrate with <baudrate>. If connection is faster or equal to <baudrate> it sets 'good' status for following GOTO command. Address <addr list> Comparing called address with <addr list>. If matched, sets 'good' status for the following GOTO command. Disconnect Disconnects the connection. Xmit <string> Transmitting <string> to modem. Pipe symbols ('|') in <string> will be changed to <CR>s. Wait [<timeout>] <string> Waiting <timeout> seconds for <string> from the modem. If <string> has pipe symbol ('|') at the end, receiving string must be terminated by <CR>. If <timeout> is omitted, then global script timeout will abort waiting for <string>. Delay <seconds> Pauses <seconds> script execution. Exit Leaves script. Begins mailer session if the script has been defined as before-session script in subst.lst file. :<Label> Defines label in script. <Label> can be unlimited text string without spaces. Example: (xxxxxx.scr): ; Test script Timer 45 Delay 2 Baud 14400 ; check connection baudrate Goto _Start _Terminate ; continue if >= 14400 :_Terminate Disconnect Exit :_Start Wait 10 login Goto _Login _Cancel :_Login Xmit mylogin| ; send login Wait 10 password Goto _Passw _Cancel :_Passw Xmit mypassw| ; send password Delay 3 Carrier Goto _Smth _Cancel :_Smth Exec Create SEM32\test.t-m Exec smth.exe Set Files=c:\t-mail\files\tmp Xmit telnet 123.456.789.101 ; establish telnet connection Delay 2 :_Cancel Exit ; End of script %$ Tiff files, attached to fax-gate messages, will be killed after transmitting IF the filename is preceded by the carat symbol, '^'. Example: (xxxx.msg) To: Fax 123-2334 --------------------------- File c:\temp\12345.gr3 File ^c:\temp\12346.gr3 --------------------------- File 12346.gr3 will be deleted after transfer. % Directives Mail and Files in events.ctl are renamed to (respectively): Mail-For and Files-For. Syntax is the same as in the previous versions. ! Directives Mail-From and Files-From in events.ctl file. Set routing rules for netmail and files attached according to originating address of a message to be routed. Syntax is similar to Mail-For/Files-For: Mail-From <addr list> <dest address> [<time interval>] If a message's originating address belongs to <Addr list> then this message will be routed to <dest address>. Example: (events.ctl) Mail-From 5030/15.* !5030/15.999 5030/124 % Flags V22 and V22B are obsoleted and could not be used for routing rules, Hold directives, setting dial prefixes, etc. % There is no universal flag ISDN now. They are separated and renamed: ISDNA - V110L ISDNB - V110H ISDNC - X75 It's also possible to use old names ISDNA, ISDNB and ISDNC. 'User' flags UISDNA, UISDNB and UISDNC are also valid. New flags added: V120L V120H Each of these flags may be used for setting routing rules, Hold/Freeze directives, defining dial prefixes, etc. Example: (events.ctl) [1] Freeze V110L V110H X75 This is equivalent to 'Freeze ISDNA ISDNB ISDNC'. You may use DEFINE for setting flag group: (events.ctl) Define NOISDNS All !V110L !V110H !X75 Define ISDNS V110L V110H X75 [1] Hold NOISDNS ; Hold All EXCEPT ISDN systems [2] Hold ISDNS ; Hold All ISDN systems [3] Hold ~X75 ; Hold All non-X75 systems ! Possibility to send netmail compressed. You should define the variable Compress_Mail. It defines the archiver program which will be used. The variable Compress_Mail_Threshold defines the minimum packet size (in kilobytes) to be compressed. If the netmail packet size is less than that defined by Compress_Mail_Threshold, t-mail will not compress mail and will send it in the usual manner. Default is 0. Example: (t-mail.ctl) Compress_Mail_Threshold 5 ; larger then 5 kB Compress_Mail C:\TOOLS\PKZIP.EXE -ex Two parameters will be added to <Compress_Mail> before executing: archive name and packet name. Another example: (t-mail.ctl) Compress_Mail C:\RAR\RAR.EXE a -m5 -o+ Warning: You should use the APPEND command for your favorite archiver (not MOVE). If you want to send netmail compressed to a system, you should set the flag XMA for that system in subst.lst. Example: (subst.lst) 5030/53 password testpsw # Flags ZYX,ZMO,XMA !$ Dial scripts allow to set Zmodem parameters (for this particular session). See an example below: Example: (xxxxxx.scr) Set ZMinCPS=400 Set ZStartBlock=4096 Set ZMaxBlock=8192 Set ZTimeout=20 Defined values will be overwritten after session. % Variable AKA_Mode is obsoleted. ! New variable Accept_AKAs in t-mail.ctl. Syntax: Accept_AKAs *:*/*.* All non-matching to this list AKAs of remote system (not the main address) will be ignored. This prevents the creation of unnecessary busy flags, and other operations when connecting with systems which use many AKAs. Default: All. Example: Accept_AKAs 2:*/*.* 1:*/*.* 124:*/*.* !2:5030/999.999 ! [OS/2 version only] New switches for t-mail-2.exe: -TXPRIORITY=n -RXPRIORITY=m where n and m sets priority of sending and receiving threads of t-mail. Please note, TCPRIORITY and RXPRIORITY are only used for OS/2 systems. Values of n(m) should be within the following limits: 200 - 231 300 - 331 Default values are 205 for TXPRIORITY and 215 for RXPRIORITY. Values of 310 and 300 respectively have been recommended for X.75 connections. Example: t-mail-2.exe -TXPRIORITY=310 -RXPRIORITY=300 %$ [OS/2 and NT only] Maximum number of system's AKAs increased to 200. % Syntax for password definitions extended. Now you may set two passwords: session password and .PKT password. Syntax: (password.ctl) <address> <session password>[/<pkt password>] (subst.lst) <address> password <session password>[/<pkt password>] The old syntax fully supported - pkt password may be ommited. PKT password length must be less then 8 chars. Examples: (password.ctl) /1 sessionpsw /2 sessionpsw2/pktpsw2 /3 /pktpsw3 (subst.lst) /1 Password sessionpsw /2 Password sessionpsw2/pktpsw2 /3 Password /pktpsw3 !$ FreePoll (FreePoll tm Arjen G. Lentz) feature. Before answering on incoming call t-mail tries to find caller id (received with RING response from the modem or from CALLER ID string) in freepoll list. If it's there, t-mail calculates summary traffic for all queue entries matching to address list in freepoll list's line corresponded to caller id. If this traffic is less than defined for this freepoll entry, t-mail rejects this call and sends to the modem string, defined as <Modem_Reject_Answer>. T-mail will accept this call anyway if previous incoming call from this caller was made within the defined interval. (t-mail.ctl) FreePoll freepoll.ctl ; FreePoll list (t-mail.ctl/modem.ctl) Modem_Reject_Answer ATH1| ; Modem's command to reject incoming call (freepoll.ctl) Syntax: <caller-id> <limit, kBytes> <interval, sec> <address list> Example: 01234567 30 60 123/34 345/67 567/90 34567 5 45 .999 09876543 10 70 /3946 124:345/34 % [OS/2 only] You may define semaphores in TNC.CTL file with flags definitions. Example (tnc.ctl) Flag tncend.t-m Flag \SEM32\tncok.flg The name of a System Semaphore must start with "\SEM32\". If one or more System semaphores were posted, TNC will pause for 60 seconds before terminating, but terminates immediately if all posted sempahores were recognized by other tasks. % T-mail tasks count the number of attempts to call a system independently, (the master task will NOT collect flags in \ATTEMPTS dir). ! New variables in t-mail.ctl Undial_On_CallTries - max number of attempts to call system Undial_On_HSTries - max number of handshake failure(s) Undial_OnSessionAborts - max number of incompleted sessions After reaching any of these limits t-mail will set a status of 'undialable' for the called system. Defaults are 0 (disabled). T-mail resets counters: Undial_On_CallTries - after connection Undial_On_HSTries - after successfull handshake Undial_OnSessionAborts - after successfull session % T-mail.ctl, events.ctl and subst.lst syntax extended. You may define a set of task numbers for each line in these config files. Old syntax: [<task no>] | [M] | [S] | [*] New syntax: [<task no>,...] | [M] | [S] | [*] Examples: (t-mail.ctl, subst.lst and events.ctl) [1] variable value [2,3] variable value [2,M] variable value [S,3] variable value [2,3,6] variable value ! New keyword for Process, Process_Flag definitions, for Exec <...> constructions in events.ctl, dial scripts, etc. : Log <string>. Puts a string to the log file, on screen, and [Os/2 only] to the pipe-log. Macros *A may be used. Example: (events.ctl) Exec Log ================ Midnight ================ 0:00 Exec Log ================ New week ================ 1.0:00 Exec Log Test string 4:00,5:00 (t-mail.ctl) Process_Flag toss.t-m Sound tosser.wav # Log Tosser started # Toss.bat # Log Tosser finished !$ New variable in t-mail.ctl: Fax_Log. Defines the name of the fax log. If not defined, all fax-related messages will be logged to the main mailer's log. Example: (t-mail.ctl) Fax_Log fax.log ; Fax log name ! New field in subst.lst: Hidden_Address <addr> . Takes hidden line parameters from settings for <addr>. Example (subst.lst): 1234/123 time cm # Hidden 555-1234 ; first hidden line # Time 5:00-8:00 # Flags ZYX,NoJanus # Hidden_Address 1234/124 ; second hidden line # Hidden 555-1235 ; third hidden line # Time 0:00-9:00 Data for line #3 of 1234/123 (the second hidden line) will be taken from information of the primary line of node 1234/124 - including the time, flags, dial prefix and phone number. ======================= Changes in t-mail ver 2599.J ======================== % Syntax for Process_Flag is extended. It's possible to define non-delete flags using '+' modifier before flag-file name: Process_Flag +<flag name> <action> Example: (t-mail.ctl) Process_Flag +flag1.t-m do_some.bat File flag1.t-m will NOT be deleted. Note: This feature works only for file flags (not for system semaphores) and only for non-inverse flags (i.e. it's not allowed to define modifiers '+' and '!' for the same flag. % Repack events, <Alt-Y> and other "Repack <addr list>" commands are meaningful now for /Slave tasks too. They will peform resetting of try counters - dial, handshake and session. Example (t-mail.ctl) Key <Alt-F2> Repack \ ; current address in a queue, current task only Key <Alt-F3> Create repack.t-m ; Create flag Process_Flag +repack.t-m Repack All ; All tasks reset counters ! New key combination: <Alt-U> prompts for address list and clears undialable status for queue entries matching this list. You may use it with KeyMacro feature: Example (events.ctl): Exec KeyMacro <Alt-U>All<0d> 6:00 ; clears undial status for All systems % Separate Min cps limit for receiving and sending files. Syntax: Connect_xxxx <string> [,<zmaxblk>[,<zstartblk>[,<ztout>[,<mincps_in>[,<mincps_out>]]]]] Here is an example of modem connection strings section in t-mail.ctl: Variable Modem string, MaxBlock,StartBlock,ZTimeout,MinCPS_Rx,MinCPS_Tx ----------------------------------------------------------------------------- Connect_300 CONNECT ;,512, 512, 10, 10, 10 Connect_1200 CONNECT 1200 ;,1024, 512, 10, 20, 20 Connect_2400 CONNECT 2400 ;,2048, 512, 10, 80, 80 Connect_4800 CONNECT 4800 ;,2048, 512, 10, 100, 100 Connect_7200 CONNECT 7200 ;,4096, 512, 10, 200, 200 Connect_9600 CONNECT 9600 ;,4096, 512, 10, 200, 200 Connect_12000 CONNECT 12000 ;,8192, 512, 10, 300, 300 Connect_14400 CONNECT 14400 ;,8192, 512, 10, 400, 400 Connect_16800 CONNECT 16800 ;,8192, 512, 10, 500, 500 Connect_19200 CONNECT 19200 ;,8192, 512, 10, 600, 600 Connect_21600 CONNECT 21600 ;,8192, 512, 10, 600, 600 Connect_24000 CONNECT 24000 ;,8192, 512, 10, 600, 600 Connect_26400 CONNECT 26400 ;,8192, 512, 10, 600, 600 Connect_28800 CONNECT 28800 ;,8192, 512, 10, 600, 600 Connect_31200 CONNECT 31200 ;,8192, 512, 10, 600, 600 Connect_33600 CONNECT 33600 ;,8192, 512, 10, 600, 600 Connect_38400 CONNECT 38400 ;,8192, 512, 10, 600, 600 Connect_57600 CONNECT 57600 ;,8192, 512, 10, 600, 600 Connect_64000 CONNECT 64000 ;,8192, 512, 10, 600, 600 You may set MinCps_In and MinCps_Out variables in Scripts. Example: (test.scr) ... Set MinCps_In=300 Set MinCps_Out=100 ... ! There are now two different "crash-poll" features: "Crash/Imm-poll" and "Crash-poll". Crash/Imm is similar to the old one - it breakes all system's time rules and T-mail calls all lines of polled system anyway, if phone number(s) is defined. It may be prompted/escaped by <Shift-Tab>. Crash is the same BUT doesn't break time rules for the polled system lines. It breakes Hold status, Hold rules in events.ctl but performs calls according to: Txy flags in nodelists Default_OH parameters in t-mail.ctl Time definitions in subst.lst It may be prompted by pressing <Ctrl-Tab> ! Crash status for a system in queue. If a system has status Crash (indicated by 'C' symbol), Hold rules in events.ctl and/or Hold status for this queue entry will be ignored. Keys: <Ctrl-D> sets Crash status for a prompted address list <Ctrl-B> clears Crash status for a prompted address list C toggles Crash status for the current queue entry Note: If the variable Crash_as_Imm is set to No (default), then: a packed message with Crash attribute OR presence of bink-style .CLO file will cause the setting of Crash status for the respective queue element. In this case status Crash will be passed from master to slave tasks. ! A new Keyword for events 'Exec', Key, Process and Process_Flag settings: Terminal. Starts the internal terminal emulator. May be used in scripts, and everywhere in constructions allowing keywords. Examples: (t-mail.ctl) Process_Flag term.t-m Terminal Key <F6> Terminal Extern_mail termreq Terminal (events.ctl) Exec Terminal 5:00 (term.scr) .... Exec Terminal .... ! New variable in (advanced) t-mail.ctl: Keep_Port_Closed (yes/NO). If set to Yes, t-mail keeps Com port closed (fossil uninitialized in DOS ver.) during idle time. It will initialize the comport every time it is needed - when initializing modem, before dialing, etc.). It's not possible for t-mail to answer an incoming call in the usual manner, i.e. it will not receive 'RING' answers from the modem. Default is No. Example: (t-mail.ctl) Keep_Port_Closed Yes Warning: if t-mail is unable to open the COM port, it tries 30 times in 10 seconds and then, if failed, exits with errorlevel 5. ! Two prefedined "environtment variables" may be used in config files t-mail.ctl, events.ctl, subst.lst and scripts: %TASKNO% - will be changed to task number %PLATFORM% - will be changed to one of these: "NT", "DOS" or "OS2". Examples: (t-mail.ctl) [*] Log t-mail%TASKNO%.log ; t-mail1.log for task 1 [*] Flag_Session %TaskNo%busy.txt ; 1busy.txt Saver T-mail for %PLATFORM% ver 2600. ; T-mail for DOS.. (events.ctl) [*] Exec daily%TASKNO%.bat 0:01 ; daily1.bat for task 1 !$ It is possible to set/clear Hold and/or Priority status for fax queue entries. Keys (when the queue window is switched to faxes by <Alt-F>: <Ctrl-H> - set hold status for prompted phone mask <Ctrl-U> - clear hold status for phone mask <Ctrl-O> - set priority status for phone mask <Alt-C> - clear priority status for phone mask <H> - toggle hold status for current fax queue entry <P> - toggle priority status for current fax queue entry Note: Status will be automatically cleared after <CH_interval>. ! <Shift-F1> shows summary info. ! Macros *I in Process, Process_Flag and Keys (etc) definitions represents PID of current task. Example: (events.ctl) Start Exec Log Current Pid: *I % If the variable UTC is not defined in t-mail.ctl, required value will be extracted from the "TZ" environment variable. % Key 'U' now TOGGLES undialable status. ! Variable Kill_Transit_Files (yes/No) in t-mail.ctl. Default is No. If set to Yes, t-mail will delete all transit files after sending. Warning: if you have this feature switched on and you have number of messages with the same file attached, the file will be deleted after FIRST time it sent. So, you cannot route the same file to more than one system at the same time. ! Posibility to send confirmation message when a message with the RRQ attribute is received (unpacked) by t-mail. Variable Audit_RRQ_Msg (yes/No) in t-mail.ctl switches on this feature. T-mail will create a confirmation message using the template file RETREQ.TPL, when a message (destinated to the main address or AKA) is unpacked. % New template field is added for message templates AUDIT.TPL and RETREQ.TPL: ~S. Represents subject string of original message. Please refer to these files in the source archive with t-mail 2599j. ! Key combination <Alt-BackSpace> logges events map (in t-mail.log). ======================= Changes in t-mail ver 2599.K ======================== % It's allowed to use mask in mailbox definitions. Example: (t-mail.ctl) MailBox Andy Elk* = d:\mymail MailBox Moderator of * = d:\mymail\mmail % Syntax for password definitions is changed. New syntax: <inpass>[,[<pktpass>][,<outpass>]]] <inpass> - password for incoming sessions <pktpass> - password for mail packets <outpass> - password for outgoing sessions (assumed the same as <inpass> if ommited) Examples (subst.lst) 5030/999 password inpass,,outpass 5030/888 password simplepass 5030/777 password inpass,packpass,outpass Note: spaces are not allowed. % variable File_Boxes_Scan is obsolete % Vairable Min_Baud is deleted. Two variables define min baudrate for outgoing and incoming sessions: Min_Baud_In - min baudrate for incoming calls Min_Baud_Out - min baudrate for outgoing calls Example (t-mail.ctl) Min_Baud_In 1200 Min_Baud_Out 9600 (subst.lst) 5030/999 Set Min_Baud_Out=28800 Default is 0, i.e. no limitations. ! New switch of OS/2 version: -MAINPRIORITY=<n> - sets main thread priority Values of n should be within the following limits: 200 - 231 300 - 331 Default value is 200. ! New switches for NT version: -PRIORITYCLASS=<n> - sets process class priority where <n> is: 1 - Normal priority class (default) 2 - High priority class 3 - RealTime priority class (not recommended) -TXPRIORITY=<n> - sending thread -RXPRIORITY=<n> - receiving thread -MAINPRIORITY=<n> - main thread where <n> is: -1 - Below normal thread priority 0 - Normal thread priority 1 - Above normal thread priority 2 - Highest thread priority defaults are: -TXPRIORITY=1 -RXPRIORITY=2 -MAINPRIORITY=1 ! New advanced variable ZBlockCheck (YES/no) in t-mail.ctl. If switched on, and received zmodem block is not divisible to 16, it will be refused. It helps with some binkley clones. Default is Yes. % Syntax for variable Circle enhanced. Circle <seconds> [(Dynamic)] Examples: (t-mail.ctl) Circle 100 (Dynamic) (events.ctl) Set Circle=40(Dynamic) 5:00-7:00 T-mail will reduce time between two outgoing calls depending on number of currently dialable systems in the mail queue. If a main value for Circle is 100 and there are four systems previously dialed in the mail queue, real waiting time will be 100/4, i.e. 25 seconds. ======================= Changes in t-mail ver 2599.L ======================== # Bug with events fixed. If event like Exec <any> 23:59 or Set <parameter>=<value> 23:00-7:00 was peformed AFTER midnight it was skipped next time to be done # Bug with "Events structure corrupted" is fixed. ======================= Changes in t-mail ver 2599.M ======================== ! CallBack feature. This is a function of T-Mail Server. A system can "order" crash-poll from another system. (T-mail.ctl): CallBack_Password cbpass ; Call Back request password If defined, callback feature is enabled. Examples of callback request messages: From: xxxxxx To: T-mail | cbpass Subj: CallBack 5030/15 --------------------------------- <body of the message may be empty> From: xxxxxx To: T-mail | cbpass Subj: CallBack #123-4567 --------------------------------- From: xxxxxx To: T-mail | cbpass Subj: CallBack #123-4567|sessionpassword --------------------------------- When such message is unpacked, T-mail will initiate Crash/Imm poll mode with parameters from Subject field of request. Note: <T-password> is also valid for callback requests.