home *** CD-ROM | disk | FTP | other *** search
-
-
-
- ////// /////// ////// // /////// ////// //
- // // // // // // // // //
- // /////// ////// // // //// //
- // // // // // // // //
- ////// // // // // // ////// //////
-
- Version 1.10
-
- ISDN CAPI 1.1 based Answering Machine
- for OS/2 Presentation Manager
-
-
-
-
- Introduction:
- ~~~~~~~~~~~~
- A few months ago we released Version 1.00 of CapiTel. Since then a lot
- of bugfixes and improvements have found their way into the new
- release, Version 1.10. Thanks to all the users who sent us their bug
- reports and feature ideas, do not stop with your feedback!
-
- A special thanks goes to the following people:
-
- - Kerstin Glodzinski
-
- - Norbert Schulze
-
- - Kolja Nowak
-
- - Peter Franken
-
- - Dirk Schreiber
-
-
- Installation:
- ~~~~~~~~~~~~
- The installation is easy. Just unzip the complete distribution archive
- into the desired destination directory and run INSTALL.CMD.
- This REXX script will create a CapiTel object on your Desktop.
-
- If you are going to create CapiTel objects on your own, do not
- forget to set the "Working Directory" !
-
- The OS/2 Multimedia Package MMPM/2 is _required_ now, please install
- it if you want to use CapiTel.
-
- CAPI 1.1 is unable to handle more than one applications that listen on
- the same EAZ. Therefore: If you use CapiTel, make sure it listens to
- the configured EAZ alone.
-
-
- Configuration:
- ~~~~~~~~~~~~~
- Go to the Properties-Notebook, which can be found in the General menu.
- There you will find the following tabs:
-
- Defaults: - Generate 16-Bit .WAV Files
- Mark the checkbox if your soundcard supports this.
-
- - Flashing-Window on new Calls
- If a new incoming call is detected, CapiTel beeps and
- the frame of its window begins to flash. Click anywhere
- in the window to turn off the flashing. You can disable
- this behaviour completely with this checkbox.
-
- - Confirm on Call-Deletion
- Mark the checkbox if you want to be asked before
- CapiTel deletes a call.
-
- - Ignore empty Calls
- If you mark this checkbox, all calls with a recording
- time of 0 seconds won't be recognized by CapiTel
-
- - Answer Delay
- Specify the default delay (in seconds) before CapiTel
- answers a call.
-
- - Max. Recording Time
- Specify the default maximum recording time (in seconds).
- CapiTel automatically hangs up if a caller speaks and
- exceeds this limit!
-
- - Incoming EAZ Mask
- Mark the checkboxes of the EAZ's you want to be serviced.
- If you are using EuroISDN (DSS1), do not forget to map
- your MSN's to EAZ's. See the manual of your ISDN card for
- further information.
-
- - ISDN Controller ID
- If you have installed more than one ISDN cards, specify
- the controller's ID. Usually you just use 0 as ID.
-
- - Filename or Pipename for Logging
- CapiTel can log all calls in a log-file. Specify
- a filename or a pipename (ie. \PIPE\ZOC), or nothing if
- you don't want this feature.
-
-
- Ports: - Here you can configure the ports. Double-click on an
- entry or access the context-menu with your right mouse
- button. The names of the ports (EAZ0 to EAZ9) can't be
- edited. Here is info about the other fields:
-
- Description: A short description for the port
-
- WAV/ALW File: A .WAV or .ALW file which is played whenever
- a call is detected on the port. You may use * as filename
- if the default file WELCOME.WAV should be used.
-
- Reaction: CapiTel is able to reject a call. Here you
- define how it should behave: 'Normal' for
- normal behaviour, 'Busy' to simulate a busy
- line, 'Refuse' to refuse the call, and
- 'Unavailable' to simulate an unavailable service.
- Important: The reaction you define here is only valid
- for the ISDN card. If another device (ie. an ISDN
- telephone) is also listening on the EAZ, the caller
- won't get CapiTel's reaction! There is nothing we can
- do about this. That's the way ISDN works.
-
- Answer Delay: The answer delay (in seconds) for the port.
- You may use * if the default delay, which can be
- configured on the General-tab, should be used.
-
- Max. Recording Time: The maximum recording time (in seconds)
- for the port. You may use * here, too.
-
-
- Callers: - Here you can add, edit and delete persons. If someone calls
- you and the incoming number matches one in this container,
- the caller specific settings are used. Use the right mouse
- button to access the context-menu. Here the info about
- the fields:
-
- Name: The callers' names
-
- Number: The callers' numbers which are used when
- identifying incoming calls. You may use the * wildcard
- at the end of a number (and only there).. ie. 024192090*
- matches ALL numbers that start with 024192090.
-
- WAV/ALW File: A .WAV or .ALW file which is played whenever
- a call is detected for the caller. You may use * as
- filename if the default file (Port-specific, otherwise
- WELCOME.WAV) should be used.
-
- Reaction: CapiTel is able to reject a call. Here you
- define how it should behave: 'Port-Default' for the
- reaction you have defined for the port (where the incoming
- call is detected), 'Normal' for normal behaviour, 'Busy' to
- simulate a busy line, 'Refuse' to refuse the call, and
- 'Unavailable' to simulate an unavailable service.
- Important: The reaction you define here is only valid
- for the ISDN card. If another device (ie. an ISDN
- telephone) is also listening on the EAZ, the caller
- won't get CapiTel's reaction! There is nothing we can
- do about this. That's the way ISDN works.
-
- Answer Delay: The answer delay (in seconds) for the caller.
- You may use * if the default delay (Port-specific,
- otherwise the delay from the General-tab) should be used.
-
- Max. Recording Time: The maximum recording time (in seconds)
- for the caller. You may use * here, too.
-
-
- Use "Save" to save the new settings, or "Cancel" to discard them.
-
-
- A note about the Port/Caller specific settings:
- If you specify something for a caller, it takes precedence over the
- settings you might have defined for a Port.
-
-
- Usage:
- ~~~~~
- The most important part of the CapiTel main window is the container. There
- you will see all incoming calls. The fields are self explanatory. You may
- throw colours and fonts into the main window, they will be remembered.
-
- If you are using CapiTel with hidden controls, you can access the various
- menu functions with the popup menu you get when you click with your
- right mouse button on the container. The window can be moved by dragging
- the sizing border with the right mouse button pressed.
-
- Use the "Record" option to record a new welcome message by calling
- yourself. A dialog will pop up asking you for a filename. WELCOME.ALW is
- the default. You can use the created ALW files in the Port and
- Callers tabs of the Properties-Notebook.
-
- Of course you can create a .WAV file yourself (using MMPM's Audio
- Recorder) and use it directly!
-
- If you have any questions, contact us!
-
-
- Some Requests:
- ~~~~~~~~~~~~~
- - CapiTel has been successfully tested with:
-
- + ELSA CAPI (all versions)
-
- + Teles CAPI (Version 2.97 and some other versions)
-
- Please let us know if you are running CapiTel on other ISDN boards,
- so we can add them to our compatibility list.
-
- - If you are willing to set up an Internet mailing list for CapiTel
- on your machine, we would be glad to hear from you.
-
- - If you are living in America and use CapiTel, please inform us
- about your experiences.
-
-
- Our plans:
- ~~~~~~~~~
- - DTMF decoding is on its way! Maybe you will see it in the next
- version.
-
- - More enhancements for the PM and ISDN interface.
-
-
- Registration:
- ~~~~~~~~~~~~
- CapiTel is Shareware. After a testing period of 60 days you have
- to register it, otherwise it will _stop_ working.
-
- See ORDER.TXT for ordering details.
-
-
- License Agreement:
- ~~~~~~~~~~~~~~~~~
- See LICENSE.TXT or LIZENZ.TXT (German Version) for details. By using
- CapiTel you accept the License Agreement.
-
-
- Availability:
- ~~~~~~~~~~~~
- Latest version and information is available at:
-
- ┌────────────────────────────────────────────────────────────────┐
- │ http://www-users.informatik.rwth-aachen.de/~cawim/capitel.html │
- └────────────────────────────────────────────────────────────────┘
-
- or on our mailbox:
-
- ┌───────────────────────────────────────────────┐
- │ Programmers' Heaven │
- │ +49-241-9519012 (Modem/ISDN) in area CAPITEL. │
- └───────────────────────────────────────────────┘
-
- If the Homepage mentioned above becomes unavailable, you can find
- help on http://www.diginet.de/~werner/capitel.html !
-
-
- Final Note:
- ~~~~~~~~~~
- Comments and Bug-Reports are welcome. Please use the included
- CTELBUGS.TXT file to report bugs of any kind. Thank you!
-
- Have fun,
- the authors,
-
-
- Werner Fehn & Carsten Wimmer
-
- werner@einstein.tng.oche.de cawim@pool.informatik.rwth-aachen.de
- 2:2452/101.155@fidonet 2:2452/101.666@fidonet
- Fax: +49-241-9209026
-
- Schuttenhofweg 220 Freunder Landstr. 53a
- D-52080 Aachen D-52078 Aachen
- Germany Germany
-
-