PC Online 1996 October/PCO_10.ISO/filesbbs/flstd136.arj/FASTLST.INF

OS/2 Help File | 1996-07-18 | 160.6 KB | 6,340 lines

ΓòÉΓòÉΓòÉ 1. Readme First ΓòÉΓòÉΓòÉ


FastLst Readme First

          Development of V7 programs

How to develop programs that use the Version 7 nodelist:

If you are interested in developing programs that access the V7
nodelist, you can find all the necessary information in the
BinkleyTerm 2.60 sources (BSRC_260.ZIP) or you can use the OS/2
DLL provided by Jim Dailey (V7NL.ZIP); both files are
requestable from 2:332/504@fidonet.

For a criterion to avoid problems in concurrent access to the V7
files while FastLst is building/renaming them, please see
"V7 Semaphore" under "Miscellaneous Info" in the main
documentation.


ΓòÉΓòÉΓòÉ 1.1. Files in the archive ΓòÉΓòÉΓòÉ


Files in the original archive:

File_Id.Diz   The standard description

Fastlst.Exe   The executable
FastLst.Ico   An Icon for FastLst
FastLst.Inf   The Inf documentation

Readme.1st   This file
Whatsnew.Txt  Fixes and additions
Fast_Min.Cfg  The sample minimal configuration file
Fast_Ful.Cfg  The sample full configuration file
Compress.Cfg  The sample compression definition file
FastLst.Doc   The Ascii documentation

License.Doc   The License
Register.Doc  The Registration Docs
Register.For  The Registration Form
BmtMicro.For  The BMT Micro registration form
PsL.Crd     The PsL Credit Card registration form supplement

              OS/2 Only

FastLst2.Ico  An Icon for FastLst/2, by Andrea Vavassori


              Dos Only

Fastl16.Exe   The 16 bit executable

Dos4Gw.Exe   Dos Extender (major releases only)
        If you have a maintenance release of the program,
        the dos extender will not be included, to avoid
        unnecessary distribution costs.


The OS/2 Inf manual is provided with other versions too,
since there are INF viewers under Dos. For example, the very
nice viewer by Damir Ujcic: VIEW01.ZIP, available for F/R from
2:332/504@fidonet: it contains a text mode viewer in both OS/2
and Dos versions.


ΓòÉΓòÉΓòÉ 1.2. Whatsnew ΓòÉΓòÉΓòÉ

              Whatsnew

If you are using an older version of the program, please read
WhatsNew.Txt before using this version.


ΓòÉΓòÉΓòÉ 1.3. How to contact the author ΓòÉΓòÉΓòÉ


          How to contact the author

If you have suggestions, bug reports, observations about the
docs, please feel free to contact me at the following
addresses:

Alberto Pasquale of 2:332/504@fidonet

[e-mail]

2:332/504@fidonet [phone] ISDNC V34+ VFC V32T H16
2:332/524@fidonet [phone] ISDNC V34  VFC V32T H16 FAX

Alberto Pasquale, Viale Verdi 106, 41100 Modena, Italy

IMPORTANT: if you call crash and require an answer, please state
whether you want it routed (might not be reliable) or ON HOLD
(in which case an answer should be available in 48h maximum,
apart from the holiday periods).


ΓòÉΓòÉΓòÉ 1.4. Support ECHO ΓòÉΓòÉΓòÉ


             Support ECHO

I am originating an international support echo for all my
programs. If you are interested, please ask your echo feeder to
find a suitable link for the APWORKS area. In addition, I
regularly read the international OS2BBS echo.


ΓòÉΓòÉΓòÉ 1.5. TIC distribution ΓòÉΓòÉΓòÉ


            TIC distribution

All my BBS related programs are distributed via a TIC file area.
If you want to join, please ask your file feeder to find a
suitable link for the APBBS (OS/2) and/or APBBSDOS (Dos/NT)
area.

Beta versions are distributed without restrictions in
APBBSBETA and APBBSDOSBETA respectively.


ΓòÉΓòÉΓòÉ 1.6. APWorks Programs and Support Areas ΓòÉΓòÉΓòÉ


            Where to look for
        APWorks Programs and Support Areas

In North America the APWORKS support echo should be easily
available, since it is on the Zone 1 backbone.


The following systems carry the ApWorks echo and file areas:


              Author's
APWORKS
  Alberto Pasquale, Modena, Italy
  [e-mail]
  2:332/504@fidonet [phone] ISDNC V34+ VFC V32T H16
  2:332/524@fidonet [phone] ISDNC V34  VFC V32T H16
  File requests could be declined between 23:00 and 06:00 GMT.
  Request APFILES for a (short) list of APWORKS files only.


               Europe

ApWorks_Germany
  Roland Schiradin, Eltville, Germany
  [e-mail]
  2:2454/169@fidonet

Cyberia/2
  Harald Kamm, Bamberg, Germany
  2:2490/3045@fidonet

McBears Cave
  Jens Holm, Skanderborg, Denmark
  2:238/888@fidonet

MufNet HQ
  Paul Bergquist, Hollviken, Sweden
  2:200/146@fidonet
  [e-mail]
  [e-mail]

The BackRoom/2 BBS
  Martin Davies, Cardiff, Wales, United Kingdom
  [e-mail]
  2:442/617@fidonet

Air Applewood
  Vince Coen, Roydon, Harlow, Essex, United Kingdom
  2:257/609@fidonet

PULSAR BBS
  Branko Radojevic, Dubrovnik, Croatia
  [e-mail]
  [e-mail]
  2:381/124@fidonet


             North America

COMM Port OS/2
  Bob Juge, Sugar Land, TX, USA
  [e-mail]
  1:106/2000@fidonet

The CrossRoads
  Dave Reed, Puyallup, WA, USA
  [e-mail]
  1:138/135@fidonet

Eclectic Lab 1
  Mary-Anne Wise, New Westminster, BC, Canada
  1:153/831@fidonet

Filebone:  MaxFDN
  Available via Planet Connect, PageSat, Filebone,
  paonline ftphub and the Filegate Project.


              Australia

Tardis BBS
  Malcolm Miles, North Balwyn, VIC, Australia
  3:633/260@fidonet


ΓòÉΓòÉΓòÉ 1.6.1. File Areas on the Internet ΓòÉΓòÉΓòÉ

          File Areas on the Internet


                UK

ftp.enterprise.net
  /apworks

ftp.baynet.co.uk
  /pub/apworks/os2
  /pub/apworks/dos
  /pub/apworks/beta


               USA

ftp.juge.com

cmnsens.zoom.com
  /pub/apworks/bbs
  /pub/apworks/bbsdos
  /pub/apworks/beta
  /pub/apworks/dosbeta

ftp.oeonline.com
  /pub/Maximus

ftp.wilmington.net
  /bmtmicro
  Only the public release versions of programs that can be
  registered via Bmt Micro.


ΓòÉΓòÉΓòÉ 1.7. Latest Versions ΓòÉΓòÉΓòÉ


            How to Request the
        Latest Version of APWORKS Programs


The following magics are honoured by APWORKS and some of the
support sites:

Magic   Name     Description

APFILES  ApFiles.Lst    List of Programs by Alberto Pasquale

FASTLST  FLST???.RAR  OS/2 The ultimate v7 Nodelist processor.
              Fully automated processing and
              maintenance, no need for clumsy batch
              files. Can report to Squish or *.MSG
              areas, multitasking friendly, many
              options.

FASTLSTD FLSTD???.RAR DOS

FASTLSTW FLSTW???.RAR NT

FASTLSTG          German Docs by Roland Schiradin
              Available on 2:2454/169

NEF    NEF???.RAR  OS/2 TIC file distribution and
              announcement for Binkley-style
              outbound and *.MSG or Squish message
              base, file-Areafix included with
              FileBone support, full multitasking
              aware (BSY, file sharing etc.),
              exceptionally flexible Multi-Aka
              support.

NEFD   NEFD???.RAR  DOS  32 bit only, w DOS4GW extender.

NEFW   NEFW???.RAR  NT

NEFG            German Docs by Roland Schiradin
              Available on 2:2454/169

FLM    FLM???.RAR  OS/2 File List Manager for Maximus,
              very flexible way of compiling
              many different lists at a time.
              Internal file base support
              (no need for FBP).

FLMD   FLMD???.RAR  DOS  32 bit only, w DOS4GW extender.

FLMW   FLMW???.RAR  NT

NMFW   NMFW???.RAR  OS/2 Multi-Robot: netmail forward to
              Sysop's point, Maximus user and file
              management via netmail messages,
              areafix for squish, point routing to
              their boss if no phone number for
              them in the nodelist, etc.

NMFWD   NMFWD???.RAR DOS  32 bit only, w DOS4GW extender.

NMFWW   NMFWW???.RAR NT

QFB    QFB???.RAR  OS/2 Substitute for FBP.EXE
              Generates a separate file-request
              index with no duplicates.

QFBD   QFBD???.RAR  DOS  32 bit only, w DOS4GW extender

QFBW   QFBW???.RAR  NT

QFBG            German Docs by Roland Schiradin
              Available on 2:2454/169

SQPRV   SQPV???.RAR  OS/2 Local area (private/public) forward
              to points for Squish. The (Co)SysOp
              points can receive the whole area.

SQPRVD  SQPVD???.RAR DOS

-----   SQFM110.RAR  OS/2 Allows to change the "from address"
              of PKTs before they are compressed.
              To be used with Squish.
              For example, it is useful to Hub
              coordinators who want to continue
              processing mail with their primary
              address for current links while
              processing with the administrative
              address for their uplink BackBone.
              FreeWare.

-----   SQFMW110.RAR NT

-----   SqSetAll.Rar OS/2 Sets renum limits in all Squish Areas
              taking the parameters from
              Squish.Cfg.

-----   SqSetDos.Rar DOS  Dos version.

-----   AdjFDate.Rar OS/2 Changes by +-N days the File Date.
              Can choose between Creation and
              Modification dates on HPFS.
              Show and Touch options.

-----   AdjF_Dos.Rar DOS  Changes by +-N days the File Date.


Current versions (July 18th 1996): NEF 2.35, FastLst 1.36,
FLM 1.35, NMFWD 2.05, QFB 1.09, SQPrv 1.04.


ΓòÉΓòÉΓòÉ 1.8. Bug Reports ΓòÉΓòÉΓòÉ


             Bug Reports

If you find out a real bug, I will do my best to fix it and make
the new version available in a few days. To do that, I need your
cooperation: when you find a strange behaviour, double check
your configuration and the manual to be really sure it's not
your fault, then study the conditions in which the bug appears
and, in the end, send me your detailed report about the bug
together with your config file and all the stuff necessary to
replicate the problem. I can fix a bug only if I am enabled to
reproduce it !


ΓòÉΓòÉΓòÉ 1.9. Wish List ΓòÉΓòÉΓòÉ

            Wish List


To help me provide a better and better program, please let
me know your problems and your wishes about future versions.

Please let me know your opinion:

Alberto Pasquale 2:332/504@fidonet
[e-mail]

BBS:   [phone] ISDNC V34+ VFC V32T H16
BBS/FAX: [phone] ISDNC V34  VFC V32T H16 FAX

Viale Verdi 106
41100 Modena
Italy


ΓòÉΓòÉΓòÉ 2. Whatsnew ΓòÉΓòÉΓòÉ


            FASTLST

         Changes and Additions


ΓòÉΓòÉΓòÉ 2.1. 1.36 ΓòÉΓòÉΓòÉ


1.36  Public Release, July 18th 1996

   - "LocalValues" can now be used multiple times for
    users at the crossroads of multiple area codes.
    See the docs under "Dial Table".

   - The "Phone" statement has been extended to:

    Phone <Addr> [#]<Phone> [<NodeFlags> [<Cost> [<UCost>]]]

   - Phone specifications starting with '#' are taken
    verbatim (no dial translation, no cost look-up); this
    may be handy for internet addresses and script names.

   - New statement "CostVerbatimPhone <cost> <ucost>" to
    specify default costs for "verbatim" phone
    specifications.


ΓòÉΓòÉΓòÉ 2.2. 1.34 ΓòÉΓòÉΓòÉ


1.34  Public Release, July 1st 1996

   - OS/2: New statement "ArcDate Write|Creation" to choose
    which date must be used by FastLst to compute the age
    of archived nodelist files, defaults to Creation,
    ignored by non-OS2 versions.

   - New errorlevel 16: nothing found after unarchiving a
    fixed-name nodelist.

   - When dealing with fixed-name nodelists, FastLst now
    always sets the archive date to the same value of the
    included file.

   - Under certain conditions the old versions of FastLst
    might re-archive the original nodelist file, so that
    it may fail TIC CRC-check when forwarded.

    The problem arises when the following conditions are
    satisfied at the same time:
    - new nodelist archive file
    - new configuration
    - zipmethod includes the original archive type

   - Improved documentation.


ΓòÉΓòÉΓòÉ 2.3. 1.33 ΓòÉΓòÉΓòÉ


1.33
   - OS/2: Version 1.32 invoked the command processor when
    executing external commands with no .exe or .com
    extension specified, instead of trying to load the
    executable directly.

    This was due to an overlook of the DosExecPgm OS/2 API,
    used to improve compatibility in the case of substitution
    parameters containing "special" OS/2 characters.

    Now FastLst tries to load the command as specified, then
    it tries with .COM extension appended, in the end with
    .EXE.


ΓòÉΓòÉΓòÉ 2.4. 1.32 ΓòÉΓòÉΓòÉ


1.32
   - New "MultiLineDesc <nnn> [<c>]" statement for enabling
    Multi-Line description support.

   - New "FlagDef" table to associate nodelist flags to user
    defined bits.

   - In "Version7 <path> <Nodex> <SysopNdx>" you can now
    specify an extension for <SysopNdx>.
    If no extension is specified, ".NDX" is assumed if
    <SysopNdx> is different from <Nodex>, otherwise the
    ".SDX" extension is used.

   - New <nodex>.BSY V7 semaphore to avoid concurrent access
    to nodelist files during compilation.

   - New errorlevel 14 exit on timeout on V7 semaphore.

   - The "MsgRem" used alone, will report all comment lines,
    excluding the empty ones.

   - Use of "Phone <addr> <newnumber>" for scripts and
    internet addresses (not new, just explained):

     Examples:

    My country code is 39 (Italy) and the area code is 59
    (Modena):

    Phone 1:106/2000  39-59-#juge*com  ; VMODEM address
    Phone 1:123/4567  39-59-12*34*56*78 ; telnet IP address
    Phone 2:245/6789  39-59-"Bob.scr"  ; quoted script name

   - Some configuration errors better flagged.

   - V7 packing algorithm improved in speed.

   - Dropped OS/2 16 bit version

   - New NT version. Unfortunately it doesn't work under W95
    (the external commands seem not to work so that nodelists
    can't be packed/unpacked. Maybe when I will upgrade the
    Watcom compiler, I will support W95 too.

   - New icon FastLst2.Ico for OS/2.

   - New Registration sites.


ΓòÉΓòÉΓòÉ 2.5. 1.31 ΓòÉΓòÉΓòÉ


1.31
   - New "CostNullPhone <cost> [<ucost>]" global keyword, to
    allow the specification of costs to be assigned to nodes
    with empty (unpublished, etc.) phone number.

    <ucost> defaults to <cost>.

    If CostNullPhone is not used, <cost> defaults to 65535
    and <ucost> to 0.

    Example:

        CostNullPhone 1000 0

    Some programs might have bugs that cause problems dealing
    with high costs (such as the default 65535). Should you
    experience problems with entries that have a "NullPhone",
    try setting a lower cost e.g. "CostNullPhone 900 0".

   - Before applying a diff, the CRC of the OLD nodelist (as
    reported in its first line) is compared to the one
    reported in the diff file. Previously this check was not
    done, so in the remote case you were applying a diff to
    an illegal nodelist (e.g. a european diff to an american
    nodelist), the error was discovered only at the end of
    the application, when checking the CRC of the resulting
    nodelist.

   - Checks added to warn about illegal empty Cost or Dial
    tables. Previously the program hanged.

   - No more Access Violations when "ArcDiff" is used without
    "NodeDiff" (it is a strange configuration, but it is now
    legal).

   - Fixed bug that caused access violation applying a
    nodediff when using "NodeDiff" without "ArcDiff" (anyway
    you are encouraged letting FastLst do all the work it is
    designed for...).

   - The number of archived nodelists to be kept (as specified
    in the ArcList statement) is now checked a second time
    after nodediff application, so that the required number
    of archives is kept exactly. Previously, after nodediff
    application, there was one archive more than specified.

   - When specifying <ArcKeep> 0 in "ArcList", the nodelist is
    not archived (previously was archived and then deleted).

   - Changed Compress.Cfg to support the OS/2 RAR.

   - Dos versions are now distributed with the same executable
    names as the OS/2 versions: FASTLST.EXE (32 bit) and
    FASTL16.EXE (16 bit).


ΓòÉΓòÉΓòÉ 2.6. 1.30 ΓòÉΓòÉΓòÉ


1.30
   - WARNING: FastLst v 1.30 is NOT a true "Drop In"
    replacement for v 1.20, anyway there is little to change:

    - Add a "CompressCfg <squish_compress_cfg_file>" line to
     the "Global Info" section of your fastlst.cfg.

    - Remove all "Arc" and "UnArc" lines.

    - In each "Input block" section where you would like to
     be able to compress new nodelists (e.g. where Nodediffs
     are processed and you were using "Arc" statements), add
     one or more "ArcMethod <meth>,[<f>] ..." lines, where
     <meth> represents one of the archiving methods defined
     in <squish_compress_cfg_file> (e.g. ZIP, LH, etc.) and
     the optional <f> is an override for the initial
     character of the archived file extension (in the case
     it is named after the day of the year and you do not
     want to use the first character of the default
     extension, as defined in <squish_compress_cfg_file>).

    - See FastLst.Doc for more information.


   - DOS: There is a new 32 bit version with the DOS4GW
    extender.

   - OS/2: There is a new 16 bit version for those who still
    use OS/2 1.3.

   - OS/2 32: the "Priority" statement can be used to change
    the priority for the FastLst process.

   - The 32 bit versions can now be configured to use the
    temporary file instead of working in memory.
    The "FileMode" statement and the "-t" command line switch
    are used for selecting the mode.

   - The routines used in 32 bit versions for "in memory" work
    (no temporary file) have been completely rewritten in
    order to need far less memory. This way, the 32 bit
    versions usually allocate about 1/4 of the memory they
    needed with v 1.20. This is an important issue on systems
    with not too much physical RAM (especially for the DOS
    version, that cannot efficiently use virtual memory), but
    the benefits are noticeable even on systems with plenty
    of RAM (less OS/2 swap reorganization when FastLst ends).

   - The "TmpPath" config statement is no longer needed:
    FastLst will use the TMP or TEMP environment variable if
    no TmpPath statement is used.

   - If you want FastLst to kill all uncompressed nodelist
    (except for those that are not stored in compressed
    format too), just add a "KillSource" line to the "Global
    Info" section of FastLst.cfg.

   - All the ArcList and Arcdiff statements can now work
    WITHOUT the specification of the first letter of the
    extension, i.e. "ArcList NodeList.z??" can be changed to
    "ArcList NodeList.???" and "ArcDiff NodeDiff.z??" can be
    changed to "ArcDiff NodeDiff.???". This way FastLst will
    automatically handle any archive type that shows up in
    the ArcList directory.

   - Now all the nodelists and nodediffs can be maintained in
    many different archived formats. The archiving method for
    NodeDiffs must be specified using "ArcDiffMethod
    <meth>,[<f>] ...".

   - The "block" structure of the config file remains, but it
    becomes a lot more flexible: the majority of config verbs
    can now be anywhere in the config file, but they have
    effect on different nodelists depending on their position
    in the cfg. E.G.: "PasswordFile", being an address
    related verb, can be both in the "Output Nodelist" and
    "Input Nodelist" sections. If you use it after "Version7"
    but before the first "NodeList", then it will be used for
    all the NodeLists of that "Output block". If you use it
    after a "NodeList", it will be used (as in the past) for
    that Nodelist only. Other non-address related verbs (e.g.
    ArcMethod) can be everywhere (global, output nodelist,
    input nodelist) and the will affect the operations
    depending on their position (global: all the nodelists;
    output: all the nodelist in the current output block;
    input: the current nodelist only).

   - "NoRedir" verb: the nodes that should be redirected will
    acquire the empty string as phone number, so that you
    will never call a system different from that you think
    you are calling.

   - Many new verbs have been added to support external
    operations; the names are self explaining:


    BeforeArcList
    AfterArcList
    BeforeUnArcList
    AfterUnArcList
    BeforeUnArcDiff
    AfterUnArcDiff
    BeforeArcDiff
    AfterArcDiff

    All the preceding verbs support the %a (complete archive
    name) and %f (add/extract file name, no path) parameters.


    BeforeEdit
    AfterEdit

    The preceding verbs support the %l and %d parameters
    standing for the full pathnames of the NodeList and
    NodeDiff files.


    BeforeCompile
    AfterCompile

    The preceding verbs support the %l parameter only.


    BeforeKillSource

    The preceding verb does not support any parameter.
    It is executed even if "KillSource" is not used.
    It is a means to invoke a command before FastLst ends.
    The "NeededBeforeKill" verb must be used to specify the
    NodeLists needed by this command.

    See FastLst.Doc for more information.

   - A new cfg section is now available: "NoCompile".
    It is a means for maintaining a NodeList (applying
    nodediffs, archiving with different archivers etc.)
    without compiling it.

   - The 3D German PointListst is now internally supported by
    FastLst. Just use the "GermanPointList" verb in the
    pertaining block.

   - When all goes well, FastLst exists with errorlevel 0 if
    it has compiled something, 100 if nothing new to compile
    was found.

   - New method for evaluating the age of a variable extension
    arcfile: the file date is considered in addition to the 2
    digits in the extension. This way you can keep a greater
    number of old files without creating problems to fastlst,
    even at the year crossing.

   - File descriptions in FILES.BBS are now maintained
    (deleted or added). New statements are available:

    ArcListDesc <description>
    ArcDiffDesc <description>

    <description> can contain the following parameters:

    %d day
    %a archiver
    %D date, USA format
    %L Local date

   - The dash is now recognized as insignificant while doing
    the Dial and Cost translations.

   - The line # is specified when reporting a config error.

   - Some information about the compilation can now be
    reported to a fido/squish message area: see FastLst.Doc
    for a description for "MsgLogArea", "MsgRemArea" and
    related statements.

   - FastLst is now multitasking smarter: e.g. it retries for
    15s when it has to delete the old compiled nodelists and
    rename the new ones.

   - New Export capability: FastLst is now able to "export"
    segments of nodelist: see the "Export" section in the
    docs.

   - The Dial and Cost tables can be unified: the old syntax
    is still supported, but a new way can be used for cost
    and dial specifications. I think that Europeans can
    continue using the old syntax (if they like), while the
    Americans should appreciate the new way (due to the
    complex dial translations needed).

   - Fixed bug that caused access violations when no
    "StatusLog" was used.


ΓòÉΓòÉΓòÉ 2.7. 1.20 ΓòÉΓòÉΓòÉ


1.20
   - WARNING: FastLst v 1.20 is NOT a "Drop In" replacement
    for previous versions; you MUST modify the config file
    following the comments in it before using this version.

   - In order to make available new powerful options without
    using clumsy syntax and risking subtle side effects and
    strange interactions, some obsolete features have been
    dropped and the methods to specify the files to be
    compiled have been modified.

   - FastLst is faster than ever: on my system and with my
    configuration, the OS/2 version is about 25% faster
    than v 1.16.
    If you time it, be aware that the OS/2 version optimizes
    memory allocation (and speed) basing on the needs of the
    previous compilation, so it is usually a bit slower on
    the first run with a new cfg.

   - The ancient "Version6" nodelist support has been
    dropped. However the sometime-useful fidouser.lst is
    still available.

   - The "MergeList" and "Kill999" options have been dropped.
    With version7 you can simply compile segments after the
    full list, since updated entries are put in the indexes
    in the place of old ones.

   - Added support for compiling multiple V7 nodelists
    with different output names.

   - Added support for automatic decompression of
    nodelists and nodediffs: no more complex batch files.

   - Now FastLst compiles an output nodelist only if some
    of its input lists are new: the -f command line switch
    has been added to force compilation.

   - Pay Attention: version 1.14 introduced a new behaviour
    in generating V7 indexes to circumvent a bug in
    Binkley 2.50 V7 search function.
    Now Binkley 2.58 should have fixed the bug, so
    FastLst goes back to the "correct" V7 index.
    A new cfg option has been added to keep using the
    "bug-circumvent" index form: see "V7BugFix" in the
    example config file.

       *******************************************************
       * If you are using an older Binkley or some program   *
       * that have got inspiration from Binkley 2.50 sources,*
       * you could experience "address not found" problems,  *
       * unless you explicitly activate the "V7BugFix"       *
       * option in fastlst.cfg.                              *
       *******************************************************


   - The "KillOld" and "AutoErase" verbs have been dropped.
    Old nodelist and nodediff files are always erased.
    You can control how many archived files are to be kept
    via the new archive processing verbs.

   - The -o -s -l -g -m -p -b command line switches have
    been dropped since they are now useless.

   - The "include" cfg keyword and the -i command line
    switch have been dropped.
    You can still include lists of passwords in a separate
    file via the "PasswordFile" cfg keyword, that allows
    to optionally omit the " Password" keyword in front of
    each password specification.

   - Due to the frequent misunderstanding of the real meaning
    and function of the "Address" config option, I have
    decided to drop it.
    These days it is not much useful (in a nodelist
    compiler), since many systems have various different
    addresses and we are used to write addresses in the full
    4D format to avoid ambiguities.
    In the various config options that require an address
    or a part of it, you now need to specify all the
    required fields, always starting with the zone number:
    no assumption is made on your zone/net/node.

   - The obsolete "MaxBaud" and "Baud" verb have been dropped.
    Should you use an old 2400 non error-correcting
    modem that needs equal DTE and DCE rates, make sure
    your front-end is configured to dial using its own
    max baud rate instead of the baud rate reported by
    the nodelist for the callee (AutoBaud in Binkley.cfg).

   - The "Country" and "UCost" verbs have been dropped,
    the "Dial" and "Cost" tables have been slightly modified
    to specify domestic and international defaults in a more
    coherent manner and to include "UCost" info.

   - The "TypeExact" verb has been substituted by the
    complementary "BitType" option.
    Thus the default is now the "Exact Type" used by
    Binkley 2.55 and newer.

   - The "TypeCost" verb has been dropped.
    It was used to differentiate CallCost basing on
    modem type. This way, in a multi-line environment,
    you could make each line call the appropriate modem
    types.
    To achieve the same goal, please use the front-end
    dial string selection options (ModemTrans in Binkley).

   - The totally useless "Name" and "Comments" options
    have been dropped.

   - The "Gated" config option has been dropped and the
    "GateAddr", "GateCoord" verbs have been replaced by
    "IncAddr", "ExcAddr", "IncCoord".

   - The "Interlist" config option has been dropped.
    It is substituted by the "IncSysOp" verb.

   - The "Type" and "CM" keywords have been dropped.
    Their functions are more cleanly implemented via
    the "NodeFlags" verb.

   - The "TypeDef" statement has been modified to a "table"
    form, for better coherency.

   - The addresses in Fidouser.Lst now always have the
    heading zone number, even if it is the same as yours.

   - Fixed little bug that could cause some cfg keywords
    not to be recognized unless followed by a comment


ΓòÉΓòÉΓòÉ 2.8. 1.16 ΓòÉΓòÉΓòÉ


1.16
   - Fixed bug in the Register routine that caused
    some keys not to work (1 every 256).


ΓòÉΓòÉΓòÉ 2.9. 1.15 ΓòÉΓòÉΓòÉ


1.15
   - Some programs skip the first entry in V6 nodelist,
    assuming it is a dummy entry that contains the version
    number of the nodelist. These programs could loose
    the "zone number" of the first zone compiled, thus
    assuming zone 0.
    Now FastLst puts the "version ID" entry at the start
    of nodelist V6.


ΓòÉΓòÉΓòÉ 2.10. 1.14 ΓòÉΓòÉΓòÉ


1.14
   - Some programs do not correctly read V7 indexes when
    an empty node appears (This happens when a key has no
    greater keys in the lower index level, so that it points
    to an empty node).
    Sometimes these programs could not find part of the
    V7 nodelist entries.
    Now FastLst adds a dummy duplicate key to avoid the problem.

   - New "Node,<address>,..." keyword to allow
    straightforwad addition of nodes without the need for
    Zone and Host lines.

   - Removed the Point flag in the output nodelist for
    point 0 entries (after the "Boss,..." keyword).


ΓòÉΓòÉΓòÉ 2.11. 1.13 ΓòÉΓòÉΓòÉ


1.13
   - When a totally empty line was found in a nodelist
    file a strange undesired nodelist entry was compiled.
    It was not a bug since FTS-0005 does not allow
    empty nodelist lines, however it has been fixed
    to avoid problems with private manually written
    nodelist segments.

   - The .DOC now reports an "undocumented" feature:
    when using the "Boss,<address>" method for pointlists,
    you can also use the point #0 to easily add the Boss
    entry, if useful.


ΓòÉΓòÉΓòÉ 2.12. 1.12 ΓòÉΓòÉΓòÉ


1.12
   - In the case of SysOps of multiple nodes, all the
    Name/Address couples are now put in the SysOp
    lists (fidouser.lst and sysop.ndx).
     This new behaviour allows to use the great "address
    choice" feature of TimEd (excellent Dos/OS2 message
    editor by Gerard van Essen 2:281/527).

   - New behaviour of "SysDup" option: since now all the
    name-duplicate sysop entries are kept by default,
    SysDup allows to keep (for a particular sysop name)
    only the entry with one of the specified addresses.

   - Many internal changes, not visible to users: if you
    find out a new unexpected behaviour, please let me
    know.

   - Removed redundant empty lines in nodelist.prn and
    nodelist.txt after comment lines.


ΓòÉΓòÉΓòÉ 2.13. 1.11 ΓòÉΓòÉΓòÉ


1.11
   - CRC is now checked on all nodelist files that have
    the expected CRC on the first line (previously it
    was checked when applying nodediffs only).

   - New errorlevel 10 for CRC Error while compiling
    nodelist (errorlevel 9 is still used for CRC Error
    while applying nodediff).

   - When merging the first line is skipped if it contains
    the CRC.

   - New -r command line switch to avoid exit on CRC Error.

   - New -s command line switch to override SYSOP.NDX
    base name.

   - Any file specification can contain drive and path,
    including -n -d -o -s overrides.

   - When using Version7 only, the added nodelist segments
    are appended to the end of the full main nodelist
    instead of the end of your zone.

   - Some small changes in Nodelist.Prn and Nodelist.Txt

   - Fixed bug introduced in v 1.10: when a region segment
    (no zone entry) was compiled as the main nodelist,
    zone 0 was erroneously assumed.
    Now the address levels not present in the main nodelist
    correctly default to the config address.


ΓòÉΓòÉΓòÉ 2.14. 1.10 ΓòÉΓòÉΓòÉ


1.10
   - OS/2: First 32 bit version, compiled by BC++.

   - OS/2: New "flat" index sorting (no more disk based
    merge-sort).

   - OS/2: "TmpPath" option in *.cfg not used any more.

   - OS/2: Long filename support

   - DOS: The "TmpPath" directory is now automatically
    created when necessary.

   - New improved Disk Full handling (errorlevel 4)

   - New "-o<nodebase>" command line switch to override
    output file names (NODEX.* -> <nodebase>.*).

   - New "KillAfter" config verb, to save old nodelist files
    in the case of compilation error.

   - New "Boss <address>" statement for easier pointlist
    support (see FastLst.DOC).

   - New optional partial address parameter in
    "MyList <nodefile> [default partial address]"
    to allow the addition of nodelist segments without
    the need of ZONE, HOST, node prefix lines (V7 only).
    See FastLst.DOC for more details.

   - New "-i<include>" command line switch to allow easier
    different file inclusions.

   - New "KillOld" config statement to kill old versions of
    nodelist files.

   - New "Kill999" config statement to kill the .999 file
    that remains after merging with MergeList.

   - Now the .999 file is killed whenever FastLst begins
    execution, thus you do not have to manually delete it
    if you stop using the MergeList command.

   - Now the "Gated" config keyword prevents Hub coordinators
    of other zones to be put in the output nodelist (only
    ZC and NC remain).

   - New "GateAddr" config keyword allows to have only
    selected zones, regions and nets in the output files.

   - New "GateCoord" config keyword allows to have in the
    output files only selected coordinators from the excluded
    zones, regions and nets.

   - New errorlevel 9 exit after CRC error while applying
    a nodediff. If "Autoerase" is active, the nodediff and
    the resulting nodelist files are erased, otherwise they
    are renamed to NODEDIFF.BAD and NODELIST.BAD.

   - New "StatusLog" config statement to specify the log
    filename in the .cfg instead of the command line.

   - New "TypeExact" config option to set modem types in a
    way more coherent with the behaviour of Binkley 2.55 and
    newer.

   - New "SysDup" config option to override FastLst's choice
    when killing duplicate SysOp Names.


ΓòÉΓòÉΓòÉ 2.15. 1.06 ΓòÉΓòÉΓòÉ


1.06
   - OS/2: Fixed bug that caused some reg. keys not to work.

   - DOS: Fixed bug that sometimes caused memory problems
    during index sorting.


ΓòÉΓòÉΓòÉ 2.16. 1.05 ΓòÉΓòÉΓòÉ


1.05
   - New UCOST verbs to set User Cost Different from Call Cost.

   - OS/2: Fixed bug that sometimes caused "Disk Full" error.


ΓòÉΓòÉΓòÉ 2.17. 1.04 ΓòÉΓòÉΓòÉ


1.04
   - Changed redirection criteria: if you have a password with a
    hold/unpublished system or its coordinator, then it is NOT
    redirected; instead it gets an empty phone number string.

   - Slightly changed the algorithm to choose the entry for
    a multi-SysOp in Sysop.Ndx, so that he never gets data from
    an entry that is not used due to local segment override.

   - Added "Flags" Keyword to set the user defined bits.

   - OS/2: Fixed a bug that caused a "NULL POINTER" error when
    compiling only Version 6 and FidoUserLst.


ΓòÉΓòÉΓòÉ 2.18. 1.03 ΓòÉΓòÉΓòÉ


1.03
   - Added <CR> before comment output to fix video output when
    both comments and report are active, Thanks to Roberto
    Zanasi.

   - OS/2: First (16 bit) version, ported by Pasquale Cantiello.


ΓòÉΓòÉΓòÉ 2.19. 1.02 ΓòÉΓòÉΓòÉ


1.02
   - Null pointer bug fixed in Merge module, Thanks to Pasquale
    Cantiello.


ΓòÉΓòÉΓòÉ 2.20. 1.01 ΓòÉΓòÉΓòÉ


1.01
   - Minor message and DOC adjusting.


ΓòÉΓòÉΓòÉ 2.21. 1.00 ΓòÉΓòÉΓòÉ


1.00
   - First public release.


ΓòÉΓòÉΓòÉ 3. About FastLst ΓòÉΓòÉΓòÉ

**************************************************************
*                               *
*                               *
*  *******  **   ****  ******  ****   ****  ******  *
*   **  *  ****  **  **  * ** *  **   **  **  * ** *  *
*   ** *  **  **  **     **   **   **     **   *
*   ****  **  **  ****   **   **    ****   **   *
*   ** *  ******    **   **   **  *   **   **   *
*   **   **  **  **  **   **   **  ** **  **   **   *
*  ****   **  **  ****   ****  *******  ****   ****   *
*                               *
*                               *
*             Version 1.36            *
*                               *
*        The ultimate V7 nodelist processor       *
*                               *
*                               *
**************************************************************
*                               *
*     (C) Copyright 1992-1996  by  Alberto Pasquale    *
*                               *
*       A L L  R I G H T S  R E S E R V E D      *
*                               *
**************************************************************



    FastLst 1.36 User's Manual, by Alberto Pasquale


ΓòÉΓòÉΓòÉ 4. Introduction ΓòÉΓòÉΓòÉ

             INTRODUCTION


-> For licensing information, please see License.Doc.

Thanks for evaluating FastLst: the ultimate "Version 7" nodelist
processor.

Version 7 is a common format for binary nodelists to be used by
mailers, message editors and all the programs that need access
to a compiled nodelist.


ΓòÉΓòÉΓòÉ 4.1. Main Features ΓòÉΓòÉΓòÉ

             Main Features


- Compiles to Version 7 format nodelist.

- Support for old "Fidouser.Lst" sysop list.

- Multiple output nodelist (V7) compilation from one config file.

- The complete maintenance of archived lists and diffs is
 achieved through internal flexible configuration, with no need
 for clumsy batch files.

- Uses "Squish Style" Compress.Cfg.

- Can be invoked from a batch file at predefined events: the
 compilation will take place only if some new list/diff is found.

- The 32 bit versions can use "in memory" mode to accomplish
 blazing speed on systems with enough memory or "temporary
 file" mode to avoid very slow operations in compiling large
 nodelists on systems with little physical memory.

- Multitasking friendly

- The OS/2 version allows for priority setting in the
 configuration file.

- Compilation reports can be posted to Fido or Squish format
 message areas.

- Full 4D (point) support, both via the "Point,..." and
 "Boss,..." keywords.

- Internal support for "German type" pointlists.

- Easy addition of nodes via the "Node,<address>,..." keyword
 in a private list.

- Easy specification of phone strings not to be translated
 for internet addresses and script names.

- In the case of SysOps of multiple nodes, keeps in the sysop
 lists (fidouser.lst and sysop.ndx) all the name/address
 entries. Allows to keep one address only for specified
 ones.

- User Cost (Msg Fee) can be set different from Call Cost.


ΓòÉΓòÉΓòÉ 4.2. Credits ΓòÉΓòÉΓòÉ

              CREDITS

This program uses the Squish "MsgAPI" code, Copyright 1991-1994
by Lanius Corporation. "Squish" and "Maximus" are trademarks of
Lanius Corporation.

"BinkleyTerm" is a trademark of Bit Bucket Software Co.

"4OS2" is a trademark of JP Software Inc.

The archivers referred-to throughout this documentation are
Copyright and/or trademarks of the respective owners.

VMODEM and SIO are Copyright by Raymond L. Gwinn.



ΓòÉΓòÉΓòÉ 4.3. Overall Operation ΓòÉΓòÉΓòÉ

            OVERALL OPERATION


FastLst has been designed to be invoked regularly from one of
your main batch files, after mail has been received or at
pre-arranged times at your pleasure: if any new (compressed or
not) nodelist/nodediff is detected, Fastlst processes them as
required (exiting with Errorlevel 0), otherwise it immediately
exits (errorlevel 100) with no further delay.

When FastLst detects a changed config or password file, it
compiles all the affected nodelists even if they are not new.

If you want FastLst to compile all of your nodelists even if no
new ones are present, you need to use the -f or -i command line
switch.

For each "output block" in the config file:

- New compressed lists or diffs are detected, unarchived and
 optionally rearchived in supplementary formats.

- New diffs are detected and applied: the resulting new nodelist
 is archived. Before applying a diff, the day number and CRC of
 the old nodelist are compared against the ones requested by
 the diff; after application, the CRC of the new nodelist is
 checked.

- New lists are detected and the pertinent output nodelists are
 rebuilt. If no new list is found for a specific "output
 block", that output nodelist is not compiled, unless the -f or
 -i command line switch is specified.

OS commands can be issued before or after each operation: for
example you can hatch the just created archive file.


ATTENTION:

- Every time the config file is changed, FastLst rebuilds all
 the output nodelists, as if the -f command line switch were
 specified.

- Every time a PasswordFile is changed, FastLst rebuilds the
 nodelists that use it.

- The date of the archive files handled by FastLst is set to
 the same value of the contained file (see ArcDate).


ΓòÉΓòÉΓòÉ 5. Input Nodelist Format ΓòÉΓòÉΓòÉ

           INPUT NODELIST FORMAT


The source nodelists and nodediffs must be in standard "St.
Louis" format, as described in FTS-0005. Anyway, FastLst allows
some extensions in order to support 4D points, "German style"
pointlists, easy single node specifications and "verbatim" phone
strings.


ΓòÉΓòÉΓòÉ 5.1. 4D Point Support: POINT and BOSS Keywords ΓòÉΓòÉΓòÉ



        4D Point Support: POINT and BOSS keywords


First method:

Points are entered in the nodelist directly following their
bossnode.  Each one starts with the "Point,<point>" keyword.

Example:

...
...
,504,Videl_3,Modena_I,Roberto_Zanasi,39-59-450600,9600,CM,XA,V32B,V42B
Point,1,Pasquale,Modena_I,Alberto_Pasquale,-!Unpublished-,9600,
Point,2,SysOp,Modena_I,Roberto_Zanasi,-!Unpublished-,9600,
Point,3,Carta,Modena,Francesco_Carta,-!Unpublished-,9600,
...
...



Second method:

Points are entered in the nodelist following the
"Boss,<address>" keyword.

Example:

...
...
Boss,2:332/504
,1,Pasquale,Modena_I,Alberto_Pasquale,-!Unpublished-,9600,
,2,SysOp,Modena_I,Roberto_Zanasi,-!Unpublished-,9600,
,3,Carta,Modena,Francesco_Carta,-!Unpublished-,9600,
...
...



ΓòÉΓòÉΓòÉ 5.2. German Point List ΓòÉΓòÉΓòÉ


            German Point List


This is a "normal" 3D nodelist that lists each Boss as a
"fakenet" HOST, with the real address as the system name,
followed by its points listed as nodes.

Example:

The following nodelist segment lists points 2:2400/1.1 .2 .3:

Host,20000,2400/1,City,Sysop_Name,49-951-999999,9600,CM,V34
,1,System_Name_1,City_1,Sysop_Name_1,49-951-999999,9600,
,2,System_Name_2,City_2,Sysop_Name_2,49-951-999999,9600,
,3,System_Name_3,City_3,Sysop_Name_3,49-951-999999,9600,



ΓòÉΓòÉΓòÉ 5.3. The NODE Keyword ΓòÉΓòÉΓòÉ


            The NODE Keyword


Another extension over FTS-0005 is provided to allow easy
addition of nodes in small private lists.

When you need to add a node to your nodelist to call it or to
enforce a session password with it, you can use the
"Node,<address>,..." keyword to avoid the necessity of adding
its Zone and Host coordinators.

You should specify a full 4D address (point optional).

Any subsequent entry will take the current address as a starting
point.

E.g.: You want to add 9:8/7.3

With "Node,...":

...
...
Node,9:8/7.3,Mickey,DisneyLand,Mickey_Mouse,1-800-111,9600,CM
...
...


With "Boss,...":

...
...
Boss,9:8/7
,3,Mickey,DisneyLand,Mickey_Mouse,1-800-111,9600,CM
...
...


With the traditional method:

...
...
Zone,9,...
Host,8,...
,7,...
Point,3,Mickey,DisneyLand,Mickey_Mouse,1-800-111,9600,CM
...
...



Now let's add 8:7/6 and 8:7/7:

With "Node,...":
...
...

Node,8:7/6,Mickey,DisneyLand,Mickey_Mouse,1-800-111,9600,CM
,7,Duck,DisneyLand,Donald_Duck,1-800-112,9600,CM
...
...


With the traditional method:

...
...
Zone,8,...
Host,7,...
,6,Mickey,DisneyLand,Mickey_Mouse,1-800-111,9600,CM
,7,Duck,DisneyLand,Donald_Duck,1-800-112,9600,CM
...
...



ΓòÉΓòÉΓòÉ 5.4. Verbatim Phones ΓòÉΓòÉΓòÉ


            Verbatim Phones

When you have to specify a phone string not to be translated,
it's handy to just inform FastLst by prefixing the string with
the '#' character.

The number is considered already in the correct form for
dialing, neither dial translation nor cost lookup are possible.

Call and User cost defaults are defined by the CostVerbatimPhone
statement.

This type of phone specification is legal everywhere (any type
of entry in nodelist, Phone overrides).

Note: you might need to change the dots '.' in internet
addresses to asterisks '*', in order to avoid that the mailer
(e.g. Binkley) translates them.

Examples:

Internet address:

,6,Mickey,DisneyLand,Mickey_Mouse,#Fantasy*Com,9600,CM,VMP

IP address:

,6,Mickey,DisneyLand,Mickey_Mouse,#123*456*789*012,9600,CM,VMP

Script name:

,6,Mickey,DisneyLand,Mickey_Mouse,#"Fantasy.Scr",9600,CM,V34

See also the Phone statement.


ΓòÉΓòÉΓòÉ 6. Miscellaneous Info ΓòÉΓòÉΓòÉ


            MISCELLANEOUS INFO


ΓòÉΓòÉΓòÉ 6.1. Multiple Sysops ΓòÉΓòÉΓòÉ


            Multiple Sysops


In the case of SysOps of more than one system, all the
name/address couples are put in the SysOp Name Lists
(Fidouser.lst and Sysop.ndx).

If you want to keep one only name/address couple for some
multiple SysOps, you can use the "SysDup <AddrLst>" option in
the config file: the SysOps who have one of the listed addresses
will be present in the SysOp lists with that entry only, even if
they have other addresses.

Example: Let's suppose that Robert Everywhere has 4 nodes:

EveryWhere, Robert      1:456/987.0
EveryWhere, Robert      2:123/457.0
EveryWhere, Robert      2:123/457.8
EveryWhere, Robert      6:321/567.0


By default all the 4 addresses are available in the sysop
lists (and some programs allow to choose among them, e.g.
the excellent TimEd message editor by Gerard van Essen).

If you prefer to keep one address only, you can specify the
desired address in a SysDup line in the config file:
e.g. "SysDup 2:123/457.8".


ΓòÉΓòÉΓòÉ 6.2. Redirected Systems ΓòÉΓòÉΓòÉ


            Redirected Systems


Systems that have no valid phone number (Unpublished, on Hold),
are redirected, provided you do not exclude redirection using
the "NoRedir" config keyword.

A redirected system is given the phone number, baud rate, modem
type, cost and flags of the preceding coordinator, the Board
name is prepended with '-R-'.

If you have a session password with the system to be redirected
or with the system it should be redirected to, no redirection is
done in order to prevent password-mismatch errors in the case
the Unpublished/Hold system calls you.

Points are never redirected.

The systems that have no valid phone number and cannot be
redirected take an EMPTY phone number string, so that your
mailer does not send unexpected strings to your modem attempting
to call these systems, should something appear in your outbound
addressed to them.

Pay attention: if you want to directly call these
null_phone-systems or their coordinators, you have to give them
a phone number using the "Phone" statement in the configuration
file.


ΓòÉΓòÉΓòÉ 6.3. V7 Semaphore ΓòÉΓòÉΓòÉ


             V7 Semaphore


To avoid collisions between FastLst and V7-able programs, a
semaphore for each output nodelist is used.

When FastLst needs exclusive access to the V7 files, it creates
and keeps open in SH_DENYRW mode a "<NODEX>.BSY" file, where
<NODEX> is the base name of the nodelist binary data file.

For example, if you use NODEX.DAT, a NODEX.BSY will be created.

When a program must access the V7 nodelist, it should create (if
not existent) and keep open for reading in SH_DENYWR mode the
"<NODEX>.BSY" file.

When the access to the V7 files is completed, the program should
close and delete "<NODEX>.BSY".

This method allows for concurrent access by multiple programs in
"read" mode, while granting exclusive access to FastLst.

Please note:

 - When the "KillAfter" statement is used, FastLst needs
  exclusive access only while deleting/renaming the files.

 - The <NODEX>.BSY does NOT need to be deleted in case of
  abnormal termination or power failure since it's considered
  busy only when open.


Example for a program that must read V7:

bsyname is the "<NODEX>.BSY" file name;
timeout is the timeout in seconds;
the file handle is returned on success, -1 on timeout


int waitopen (const char *bsyname, int timeout) // -1 on timeout
{
  int ret = -1;
  int i = 0;

  do {
    if (i > 0)
      sleep (1);
    if (access (bsyname, F_OK)) {       // file not existent
      int handle = open (bsyname, O_WRONLY | O_CREAT, S_IWRITE);
      if (handle != -1)
        close (handle);
    }
    ret = sopen (bsyname, O_RDONLY, SH_DENYWR);
    i ++;
  } while ((ret == -1) && (i < timeout) &&
           ((errno == EACCES) || (errno == ENOENT)));
           // sharing violation or file not found
    return ret;
}




ΓòÉΓòÉΓòÉ 7. Installation ΓòÉΓòÉΓòÉ


             INSTALLATION


1) There are 4 versions of FastLst:

  FASTLST.EXE  OS/2
  FASTLST.EXE  NT
  FASTLST.EXE  DOS 32 bit, with DOS4GW DOS Extender
  FASTL16.EXE  DOS 16 bit

  The OS/2, NT and Dos versions are distributed in separate
  archives (see Readme.1st).


  OS/2 and NT:

  You have only to decide whether to use the "FileMode"
  statement in the configuration file. If you have enough
  physical memory available you should use the default "in
  memory" mode. On the other hand, if the execution of FastLst
  is excessively slow, you probably are low on memory and you
  could benefit by the use of the temporary file. You can use
  the "-t" command line switch to experiment, before enabling
  the "FileMode" statement in the configuration file, if really
  necessary.


  DOS 32 bit:

  to be used with Dos on a 386sx or better with free extended
  memory.

  If you have enough free extended memory, you can use the
  default and fast "in memory" mode (4MB allow the compilation
  of approximately 64,000 nodes).

  If you do not have enough free memory, you can use the
  "temporary file" mode, provided you have 800KB of free
  extended memory (see the "-t" command line switch and the
  "FileMode" configuration statement).

  If you have no free extended memory at all, you have to use
  the 16 bit version.


  DOS 16 bit:

  to be used with Dos on 8088 or better.

  The only requirement is 530KB (or better 600KB) of free
  conventional memory.

  If you can't free enough conventional memory, you must use a
  386sx or better with at least 800KB of free extended memory
  and use the 32 bit version, which has less stringent
  conventional memory requirements.


2) Write your FastLst.Cfg.
  You can find useful examples in the Fast_*.Cfg files and
  detailed information in the "CFG REFERENCE" section of this
  documentation.


3) Edit your batch file in order to call FastLst whenever you
  would like to test for the presence of new list/diff files
  and process them. If you do not pass a different pathname as
  a command line parameter, FastLst.Cfg must reside in the
  current directory.


4) (OS/2): Make sure you have the MSGAPI32.DLL in a directory
   contained in your LIBPATH. MSGAPI32.DLL can be found in the
   Squish 1.11 archive (SQSHP111.LZH).

   If you have little memory and FastLst runs excessively
   slow, try using the "temporary file" mode (see the "-t"
   command line switch and the "FileMode" configuration
   statement).


  (NT): Make sure you have the MSGAPINT.DLL in a directory
   contained in your PATH. MSGAPINT.DLL can be found in the
   Max 3.01 for Windows archive (MAX301N.ZIP).

   If you have little memory and FastLst runs excessively
   slow, try using the "temporary file" mode (see the "-t"
   command line switch and the "FileMode" configuration
   statement).


  (DOS32): Make sure you have the DOS4GW.EXE Dos extender (from
   Rational System Inc.) in your path.

   The DOS4GW extender requires an XMS or DPMI memory driver
   installed in your config.sys: e.g. HIMEM.SYS, QEMM (by
   QuarterDeck Office Systems Inc.).

   FastLst requires lots of memory to compile long nodelists:
   you must make sure that the Dos extender can make it
   available to FastLst.

   If you need more memory than you physically have, you must
   use the "temporary file" mode (see the "-t" command line
   switch and the "FileMode" configuration statement).

   You could also use the "in memory" mode and activate the
   DOS4GW virtual memory mode, but it is not recommended since
   it could unacceptably slow down the compilation process.
   Anyway, if you really want to test it on your own, the
   virtual mode is activated using the DOS4GVM environment
   variable (e.g. for 16MB virtual allocation size:
   SET DOS4GVM=VirtualSize#16384).


  (DOS16): Make sure you have at least 530KB of free
   (conventional) memory. You should use small message buffers
   (MsgSize statement) in order to avoid out of memory
   conditions during the merge-sort process.


  (DOS): Please note that FastLst tells you (on screen, in the
   logs, in the report message) how much memory remains after
   compilation, so that you can realize when you are running
   in marginal conditions and consequently adjust your
   configuration before you run out of memory.

   During the merge-sort process (16 bit and 32 bit in
   "temporary file" mode) FastLst automatically uses the
   maximum number of ways (up to 8) allowed by the available
   memory. The minimum number of ways is obviously 2. So, if
   FastLst reports a "2 Way Merging", you know that the final
   "MemFree <bytes>" is the actual margin for the "out of
   memory" error. On the other hand, if FastLst reports "3 Way
   Merging" or more, you know that there is an additional
   margin for the "out of memory", approximately 60KB for each
   way above the minimum of 2.


ΓòÉΓòÉΓòÉ 8. Command Line Switches ΓòÉΓòÉΓòÉ


           COMMAND LINE SWITCHES


-c<cfg>
    Use <cfg> configuration file instead of FASTLST.CFG.

-f
    Force compilation even if no new list/diff has been
    detected.

-i
    Ignore FastLst.Dat: run as if it were the first time.
    All nodelists compiled, all exports executed.

-p
    Prepare: Unarc new lists and diffs, Apply diffs and Arc
    new nodelists, do not compile nodelists.

-r
    When applying a diff, FastLst usually deletes the newly
    generated source nodelist file if a CRC error is
    detected. With this switch the new nodelist is _not_
    deleted, so that it will be processed anyway.

    When compiling a list, FastLst usually aborts the
    compilation of the current output nodelist if a CRC
    error is detected. With this switch the current output
    nodelist will be entirely compiled anyway.

-t
    Toggles between "temporary file" mode and "in memory"
    mode. If "FileMode" is enabled in the configuration
    file, it switches to "in memory" mode and vice versa.

-h or -?
    for help


ΓòÉΓòÉΓòÉ 9. Errorlevels ΓòÉΓòÉΓòÉ


             ERRORLEVELS


 0 - Normal termination, something compiled
 1 - Help requested
 2 - File Open error
 3 - Abnormal termination
 4 - Disk Full
 5 - Can't find config file
 6 - Configuration error
 7 - Out of memory
 8 - Read error while applying diff
 9 - CRC error (applying diff)
 10 - CRC error (compiling list)
 11 - User Break
 12 - Cannot rename temporary output nodelist files
 13 - Cannot open source nodelist file
 14 - Timeout waiting on V7 semaphore
 15 - Too many nodelists in inbound directories
 16 - Nothing found after unarchiving a fixed-name nodelist

100 - Normal termination, nothing compiled

250 - MsgApi: Init Error
251 - MsgApi: Area Open Error
252 - MsgApi: Area Lock Error
253 - MsgApi: Area Close Error


ΓòÉΓòÉΓòÉ 10. Configuration ΓòÉΓòÉΓòÉ


             CONFIGURATION


Before analyzing the cfg keywords in detail, let's introduce the
overall mechanism that is at the basis of FastLst's
configuration.

If you are converting from a different nodelist compiler, please
forget the old configuration and start from scratch.

FastLst.Cfg is divided into several logical blocks and the
sequence of the various statements is essential: you cannot just
put keywords somewhere in the config file; they must be arranged
in the correct order.

At first, this characteristic of FastLst's configuration might
appear complex to understand, but, as soon as you will grasp its
logic, you will understand that it's really easy to write a
correct configuration file and you will appreciate its
extraordinary flexibility.

The first block of configuration is the "Global" one.
The verbs in this block refer to the compilation of all the
nodelists.

Then there are one or more "Output Blocks": each output block
refers to the compilation of a single V7 nodelist (e.g.
NODEX.*).

Each "Output Block" has a "Output section" (with statements
regarding the compilation of the whole V7 list) and one or more
"Input blocks" containing the verbs that describe how to compile
each of the source nodelists.

The first "Output Block" can optionally be of a special kind: a
"NoCompile" block, whose "Input Blocks" describe nodelists that
must be maintained (e.g. diffs applied) but not compiled to any
V7 list.

Some statements can be used in blocks of a particular type only,
others can be used in many different places depending on what
nodelists you want to be affected. As a rule of thumb, you can
use each statement anywhere it seems to be logically acceptable.

If you feel frightened by such abstract considerations, please
take a look at the example Fast*.Cfg files, so that you can
quickly realize it's not that difficult.

To write your own configuration file you should start modifying
the example one that is more adequate to your needs.

Now, let's consider all the verbs that are allowed in FastLst's
configuration.


ΓòÉΓòÉΓòÉ 11. Cfg Reference ΓòÉΓòÉΓòÉ


             CFG REFERENCE



- Items between square brackets (e.g. [<item>]) are optional.

- The names of the various Keywords are NOT case sensitive.

- When a directory path is required, the trailing backslash '\'
 is optional.

- The ';' character starts comments: any character following the
 ';' is ignored, unless inside quoted strings.

- The maximum length of configuration lines is 254 characters,
 so don't go further (you can always split address lists into
 smaller ones).

- In the OS/2 version, any file specification can be a legal
 OS/2 name, between double quotes if necessary.


Please, note that the order of the configuration statements
follows some logical rule. In order not to create confusion in
the .cfg file and not to break some _necessary_ order relation,
please follow the scheme proposed in the example Fast*.CFG files
and in this reference documentation.

Please, be aware that the generation of text files (FidoTxt,
FidoPrn, FidoUserLst verbs) and the use of lots of options and
overrides can slow down the compilation process: use only the
options/overrides that you really need if you mind compilation
time.


ΓòÉΓòÉΓòÉ 11.1. Global ΓòÉΓòÉΓòÉ

             G L O B A L


The following verbs can be used in the Global section of
FastLst.cfg. Some of them can be used in other places also, so
they are divided into separate sections.


ΓòÉΓòÉΓòÉ 11.1.1. Section A ΓòÉΓòÉΓòÉ

             G L O B A L

              Section A



The following configuration verbs can be used in the GLOBAL
section of FastLst.Cfg.


ΓòÉΓòÉΓòÉ 11.1.1.1. RegKey ΓòÉΓòÉΓòÉ


RegKey <RegKey>

    Registered Users only: <RegKey> is the registration key
    and it is NOT case sensitive.

  Example:

    RegKey dfhyuwru6274623


ΓòÉΓòÉΓòÉ 11.1.1.2. Priority ΓòÉΓòÉΓòÉ


Priority <type> [<level>]

    Changes the execution priority of the FastLst process
    (OS/2 only).

    Ignored by NT and DOS versions.

    <type> is one of: Idle Regular High

    <level> is an integer in the range 0...31 and defaults
    to 0.

    If you do not use this statement, FastLst will run at
    the default priority, which normally is "Regular 0".

  Examples:

    Priority High 31

     Gives Fastlst the highest priority for "non
     time-critical" processes. It will run fast even if it
     is in the background and other processes are active.


    Priority Idle

     Gives FastLst the lowest priority, so that it loads
     the system as minimally as possible. It will run
     significantly slower, especially if in the background
     or when other CPU intensive processes are in
     execution.


ΓòÉΓòÉΓòÉ 11.1.1.3. FileMode ΓòÉΓòÉΓòÉ


FileMode

    Enables the temporary file mode (32 bit only).

    Ignored by the 16 bit versions.

    Makes Fastlst use temporary files, so that the memory
    requirements remain low and independent of the size of
    the compiled nodelists.

    If you do not use this statement, FastLst (32 bit) uses
    memory for storing the data it needs for building the V7
    indexes. If you have not enough free memory, the DOS 32
    version will return an "out of memory" error while the
    OS/2 one will run slowly.


ΓòÉΓòÉΓòÉ 11.1.1.4. StatusLog ΓòÉΓòÉΓòÉ


StatusLog <LogFile>

    <LogFile> is the name of the file where all the
    operations performed by FastLst will be logged,
    following the "Binkley Style".

    In multitasking environments, please be sure to use a
    file that cannot be used by other processes at the same
    time. For example: if (in your system) FastLst can be
    executed while Binkley is running, please use different
    log files.

    Should you not want the log file, you can comment this
    keyword out.

  Example:

    StatusLog d:\bbs\log\FastLst.log


ΓòÉΓòÉΓòÉ 11.1.1.5. CompressCfg ΓòÉΓòÉΓòÉ


CompressCfg <compress_cfg>

    This is a "Squish style" compress definition file.

    In the case you are using a case-sensitive
    de/compression program (e.g. OS/2 ZIP/UNZIP), please
    make sure to use the correct switches in <compress_cfg>
    and/or the correct case (Lower/Upper) in <NodeList> and
    <NodeDiff> specifications.

    You can find the suggested <compress_cfg> in the example
    Compress.Cfg file included in the FastLst pack.

    If you are already using Squish and/or Maximus, you can
    just specify the name of their compress.cfg (but do
    check that they indicate the necessary switches to avoid
    case sensitiveness during extraction).

    Refer to the "Compress Definition File" section at the
    end of this document for the syntax of <compress_cfg>.


ΓòÉΓòÉΓòÉ 11.1.1.6. TmpPath ΓòÉΓòÉΓòÉ


TmpPath <TmpDir>

    Specifies a directory to be used for temporary files.

    If TmpPath is not used, FastLst will use the path
    specified in the TEMP or TMP environment variables or
    (if they are not defined) the current directory.

    FastLst will not damage any file already present in the
    temporary directory.

    The 16 bit versions always use temporary files, while
    the 32 bit ones work in memory unless the "FileMode"
    statement or -t command line switch are used.


ΓòÉΓòÉΓòÉ 11.1.1.7. InputPath ΓòÉΓòÉΓòÉ


InputPath <NodeDir>

    Specifies the default path for input files (source
    nodelists/nodediffs). You can override it by using a
    full pathname in input-file specifications.

    Created if not existing.

  Example:

    InputPath d:\bbs\nodelist\


ΓòÉΓòÉΓòÉ 11.1.1.8. ArcPath ΓòÉΓòÉΓòÉ


ArcPath <ArcNodeDir>

    Specifies the default path for Archived nodelist files.
    It usually points to the file area where your TIC
    processor moves the inbound nodelist archives.

    You can override it by using a full pathname in
    Archived-file specifications.

  Example:

    ArcPath d:\bbs\file\nodelist\


ΓòÉΓòÉΓòÉ 11.1.1.9. ArcDate ΓòÉΓòÉΓòÉ


ArcDate Write|Creation

  (OS/2)
    Selects the date to be used for computing the age of
    fixed-name archived nodelist files.

    This setting is useful for HPFS (which has separate
    Write and Creation dates) and ignored for FAT.

    If not specified, "Creation" is assumed.

    Attention: in order to avoid problems in the case the
    date has been corrupted during the transfer of the file,
    it is best to choose the same date that your mailer sets
    as "receive/upload" date or that is touched by your TIC
    processor.

  Examples:

    ArcDate Write    ; Use the Write date
    ArcDate Creation   ; same as default


ΓòÉΓòÉΓòÉ 11.1.1.10. MultiLineDesc ΓòÉΓòÉΓòÉ


MultiLineDesc <nnn> [<c>]

    By default, files.bbs description must be on a single
    line; this statement enables Multi-Line support.

    <nnn> is the number of spaces that must precede the
    continuation lines.

    <c> is the continuation character.

    If <c> is NOT specified, it is assumed that the
    continuation lines must be preceded by <nnn> spaces.

    If <c> IS specified, it is assumed that the continuation
    lines must be preceded by <nnn> spaces, the <c>
    character and one more space.

    For example, to have the 2nd and following description
    lines in files.bbs start at the 32nd column, use:

    MultiLineDesc 31

    A description in files.bbs would be like:

    Test.Zip This is the first description line
                    this is the 2nd line
                    this is the 3rd line
    ^               ^^
    1              31  32

    To have the continuation lines preceded by a '|'
    character, use:

    MultiLineDesc 29 |

    A description in files.bbs would be like:

    Test.Zip This is the first description line
                   | this is the 2nd line
                   | this is the 3rd line
    ^              ^  ^
    1              29  32


ΓòÉΓòÉΓòÉ 11.1.1.11. KillAfter ΓòÉΓòÉΓòÉ


KillAfter

    Old V7 files are killed after the new ones have been
    successfully written.

    The new V7 files are written to temporary names, then
    the old ones are killed and the new ones renamed (and
    FastLst retries for 15s in case of error, to be
    multitasking smart).

    Thus you will always have a valid V7 nodelist, even in
    the case of a compilation error and consequent compile
    abortion. Besides, your multitasking system can continue
    operations while FastLst is working. On the other hand
    you might need some more spare disk space to hold the
    old and new files during compilation.


ΓòÉΓòÉΓòÉ 11.1.1.12. KillSource ΓòÉΓòÉΓòÉ


KillSource

    Tells FastLst to kill all uncompressed nodelists (that
    are also available in archived format) before
    terminating.

    Please note that FastLst deletes a source nodelist only
    if the ArcList statement is defined.

    Besides, when the NodeDiff statement is used, an
    ArcMethod must be defined to allow the deletion of the
    nodelist.

    When no NodeDiff is defined, FastLst assumes that the
    uncompressed NodeList has been extracted from a
    corresponding archive.


ΓòÉΓòÉΓòÉ 11.1.1.13. BeforeKillSource ΓòÉΓòÉΓòÉ


BeforeKillSource <command>

    This statement is used to invoke a command of your
    choice before the source nodelists are killed, upon
    FastLst completion.

    <command> is executed even if "KillSource" is not used.
    It is a means of invoking a command before FastLst ends.

    The "NeededBeforeKill" verb must be used to specify the
    NodeLists needed by this command: if one of these
    nodelists is found new, then this command is invoked
    after decompressing all the nodelists that have the
    "NeededBeforeKill" attribute (and have not been
    decompressed yet).

    IMPORTANT: <command> is executed ONLY if some nodelist
    affected by a "NeededBeforeKill" verb has been detected
    as new.

    <command> can be any command that is valid for the
    command interpreter specified in your COMSPEC
    environment variable.

    If <command> invokes an executable file, it is loaded
    and executed directly; otherwise your command
    interpreter is invoked, so that you can execute a batch
    file or any other valid command.

    No variable parameters are supported.


ΓòÉΓòÉΓòÉ 11.1.1.14. Dash2Comma ΓòÉΓòÉΓòÉ


Dash2Comma

    Change dashes to commas in the phone numbers.

    Useful for people that are still connected to ancient
    "rotary pulse" electromechanic telephone exchanges.


ΓòÉΓòÉΓòÉ 11.1.1.15. NoDash ΓòÉΓòÉΓòÉ


NoDash

    Remove dashes from the phone numbers.


ΓòÉΓòÉΓòÉ 11.1.1.16. NoReport ΓòÉΓòÉΓòÉ


NoReport

    Do not output nodelist statistics


ΓòÉΓòÉΓòÉ 11.1.1.17. NoRedir ΓòÉΓòÉΓòÉ


NoRedir

    Nodes that do not have a valid phone number (Hold,
    Unpublished) are usually redirected to their
    coordinators.

    When this verb is used, redirection does not take place
    and the node is given an empty phone number, so that you
    never call a system different from that you think you
    are calling.

    Please note that (even with no NoRedir verb):
    - points are never redirected;
    - if you have a password with a system or its
     coordinator, this node will never be redirected.


ΓòÉΓòÉΓòÉ 11.1.1.18. V7BugFix ΓòÉΓòÉΓòÉ


V7BugFix

    Circumvents a bug with V7 nodelist in Binkley 2.50 (and
    perhaps in many other programs whose V7 search function
    was inspired by Binkley's sources) that can sometimes
    hide segments of V7 nodelist.

    Binkley 2.60 is OK, but some other programs may not: if
    you are unsure, keep this keyword active.


ΓòÉΓòÉΓòÉ 11.1.1.19. MsgLogArea ΓòÉΓòÉΓòÉ


MsgLogArea <path> [-$]

    Some information about the compilation can be reported
    to a fido or squish message area.

    <path> indicates a message area for reporting
        compilation logs.

    -$   specifies that the area is in Squish format;
        otherwise it is assumed to be *.MSG.

    The "MsgLog" statement (see Global Section C) can be
    used to add some information that is not reported by
    default.

  Examples:

    MsgLogArea \bbs\mail\net -$
    MsgLogArea \bbs\mail\net\


ΓòÉΓòÉΓòÉ 11.1.1.20. MsgRemArea ΓòÉΓòÉΓòÉ


MsgRemArea <path> [-$]

    The comments found in the compiled nodelists can be
    selectively reported to a fido or squish message area.

    <path> indicates a message area for reporting
        compilation logs.

    -$   specifies that the area is in Squish format;
        otherwise it is assumed to be *.MSG.

    The "MsgRem" statement (see Global Section C) MUST be
    used to specify which types of comments you want to be
    reported.

    Please note that no comments are reported if no "MsgRem"
    statement is used.

  Examples:

    MsgRemArea \bbs\mail\net -$
    MsgRemArea \bbs\mail\net\


ΓòÉΓòÉΓòÉ 11.1.1.21. MsgFromNode/MsgToNode ΓòÉΓòÉΓòÉ


MsgFromNode <address>
MsgToNode <address>

    Specify the addresses for the created messages.

    <address> is a 4D address.

  Example:

    MsgFromNode 2:332/504
    MsgToNode  2:332/504.1


ΓòÉΓòÉΓòÉ 11.1.1.22. MsgTo ΓòÉΓòÉΓòÉ


MsgTo <name>

    Specifies the name of the addressee of the created
    messages.

  Example:

    MsgTo Alberto Pasquale


ΓòÉΓòÉΓòÉ 11.1.1.23. MsgAttr ΓòÉΓòÉΓòÉ


MsgAttr <attributes>

    Specifies the attributes for the created messages.

    <attributes> can be a (not case sensitive) combination
    of:

    P : Private
    K : Kill/Sent
    C : Crash
    H : Hold
    D : Direct (crash + hold in squish messages)

  Examples:

    MsgAttr P
    MsgAttr pk


ΓòÉΓòÉΓòÉ 11.1.1.24. MsgSize ΓòÉΓòÉΓòÉ


MsgSize <bytes>

    Specifies the maximum size of a single message: after
    this length, the message is split.

    Defaults to 7K, greater values are recommended, so that
    the message is not divided into too many parts.

    16 bit: maximum 65535
    32 bit: no maximum (4294967295)

    WARNING: Dos 16 version has stringent problems of
    memory, so you should be happy with the 7K default.

  Example:

    MsgSize 60000


ΓòÉΓòÉΓòÉ 11.1.1.25. CostNullPhone ΓòÉΓòÉΓòÉ


CostNullPhone <Cost> [<UCost>]

    Specifies the costs to be assigned to nodes with empty
    (unpublished, etc.) phone number.

    <Cost> is the "call cost" .
    <UCost> is the "user cost" (fee for netmail messages).

    <UCost> defaults to <Cost>.

    If CostNullPhone is not used, <Cost> defaults to 65535
    and <UCost> to 0.

  Example:

    CostNullPhone 1000 0

  Note:

    Some programs might have bugs that cause problems
    dealing with high costs (such as the default 65535).
    Should you experience problems with entries that have a
    "NullPhone", try setting a lower cost e.g.
    "CostNullPhone 900 0".


ΓòÉΓòÉΓòÉ 11.1.1.26. CostVerbatimPhone ΓòÉΓòÉΓòÉ


CostVerbatimPhone <Cost> [<UCost>]

    Specifies the costs to be assigned to nodes that have
    a verbatim phone specification.

    <Cost> is the "call cost" .
    <UCost> is the "user cost" (fee for netmail messages).

    <UCost> defaults to <Cost>.

    If the statement is not used, both costs default to 0.

  Example:

    CostVerbatimPhone 10 0


ΓòÉΓòÉΓòÉ 11.1.1.27. Cost and Dial translation Tables ΓòÉΓòÉΓòÉ


        Cost and Dial translation Tables


You can specify costs and dial translations in separate tables
or in a combined "Dial and Cost" table.

Note: These tables are not used against "Verbatim Phones".

To Europeans: you usually will prefer separate tables, since the
dial translations are quite simple. This way you can keep the
(very short) dial table always fixed, while adjusting the cost
table to your needs. Anyway, if you do not use long cost tables,
you could find the combined dial & cost table convenient.

To Americans: you have quite long dial tables since you need to
list all the "local exchange" codes. So you usually don't like
duplicating this list for assigning the costs: you will
appreciate the combined table. The custom definition for the
list of local exchanges should also speed up the compilation of
all the nodelist entries that are out of your Area Code.


ΓòÉΓòÉΓòÉ 11.1.1.27.1. Cost Table ΓòÉΓòÉΓòÉ


              Cost Table


This is the Cost Table to be used in association with a separate
Dial table, that must follow.

It begins with "Cost" and ends with the "End" keyword.

Each entry in the cost table has the following format:

<PartPhone> <Cost> [<UCost> [<StripFlags>]]

<PartPhone>
    is a partial phone number to be matched with the initial
    part of nodelist entries. The dashes are ignored. The
    <PartPhone> of the last entry must be a single dash "-",
    to mean that all the remaining numbers will take the
    costs specified there.

<Cost>
    is the cost field of the compiled nodelist (0->65535).
    It represents the "Call Cost" for any node whose phone
    number begins with <PartPhone> in the source nodelist
    (before dialing translations).

<UCost>
    is an optional "User Cost" (fee for a netmail message on
    BBS). If it is not used, it's taken equal to <Cost>. If
    you would like your users to be able to send netmail
    messages from the BBS with no need for "credits", you
    should set <UCost> to 0.

<StripFlags>
    is an optional list of nodelist flags (not case
    sensitive) to be stripped from entries of nodes whose
    phone number begins with <PartPhone>. Thus you can strip
    some modem-type flags (V32, HST, ZYX, ...) when calling
    into critical areas. This parameter can only be used
    after <UCost>.


When searching for "PartPhone", the first matching entry is
applied: in the case of entries with an initial part in common,
you have to specify them in sequence from the longest to the
shortest. If no match is possible, the last line specifies the
default (thereby international) <Cost> and optional <UCost> and
<StripFlags>.


WARNING: This table CANNOT be left totally empty: it must contain at
least the default entry  "- <Cost>".


  Example 1:

    The following example assigns <UCost> = 0 to all, <Cost>
    = 0 to local systems, 60 to domestic and 300 to
    international ones.

        Cost
             39-59         0 0   ; local
             39-          60 0   ; domestic long distance
             -           300 0   ; international
        End



  Example 2:

    Now let's strip some flags from some areas.

        Cost
              1-703      300 0 HST,H14,H16 ; strip HST
             45-123      300 0 V32,V32b    ; strip V32 and V32b
             39-59         0 0             ; local
             39-          60 0             ; long distance
             -           300 0             ; international
        End



  Example 3:

    Now let's differentiate between urban and district calls
    and between Continental and Intercontinental calls; call
    and user cost considered equal.

        Cost
             39-59-2       5   ; urban
             39-59-3       5   ; urban
             39-59-4       5   ; urban
             39-59-81      5   ; urban
             39-59-82      5   ; urban
             39-59        30   ; district
             39           60   ; domestic long distance
             43          100   ; Austria
             32          100   ; Belgium
             45          100   ; Denmark
             33          100   ; France
             49          100   ; Germany
             44          100   ; UK
             31          100   ; Netherlands
             34          100   ; Spain
             46          100   ; Sweden
             41          100   ; Switzerland
              1          200   ; USA/Canada
             -           300   ; others
        End



  Example 4:

    Minimal cost table for sysops that do not want to use
    the nodelist cost fields.

        Cost
          - 0
        End


ΓòÉΓòÉΓòÉ 11.1.1.27.2. Dial Table ΓòÉΓòÉΓòÉ


              Dial Table


This table can be used either as a simple Dial Table in
association with a separate preceding Cost Table or as a
combined Cost/Dial Table (in which case the Cost Table must NOT
exist).

It begins with "Dial" and ends with the "End" keyword.

Each entry has the following format:

<PartPhone> [<PreSuf>]

or

<PartPhone> <PreSuf> [<Cost> [<UCost> [<StripFlags>]]]

The first form is for the separate Dial Table, the second one is
for the combined Cost/Dial Table.


The following two keywords allow to specify groups of exchanges
that must be handled by a certain dial table entry:


LocalValues <PartPhone> <PreSuf> [<Cost> [<UCost> [<StripFlags>]]]

    This keyword is provided for clarity only: it is
    taken just as a normal specification with no
    heading "LocalValues".


LocalExchanges <num> ...

    Lists all the exchanges that must be handled as per the
    preceding dial translation entry (which may be preceded
    by the "LocalValues" keyword for clarity).

    Please remember that the line length is limited to 254
    characters.

    You can use multiple "LocalExchanges <num> ..."
    statements if you like short lines or need more than
    254 characters.

    Please note that all numbers that (after <PartPhone>
    stripping) begin with <num> are considered local.
    For example, if 220, 221, 222, 223, 224, 225, 226, 227,
    228, 229 are all local exchanges, you can indicate 22 to
    include them all.


The use of these two statements in the place of a long list of
normal table lines (one for each local exchange) should also
speed up the processing of all the nodelist entries that are not
in your area code.



<PartPhone>
    is a partial phone number to be matched with the initial
    part of nodelist entries. The dashes are ignored. The
    <PartPhone> of the last entry must be a single dash "-",
    to mean that all the remaining numbers will take the
    parameters specified there.

<PreSuf>
    can be one of:
      a: <Prefix>
      b: /<Suffix>
      c: <Prefix>/<Suffix>
      d: /

    <PartPhone> is stripped from numbers beginning with it,
    then <PreSuf> is used to prepend/append the specified
    strings to the remainder.

    Case a: <Prefix> is prepended.
        e.g.: "39- 0"
        strips "39-" and adds "0" at the beginning of
        the number.

    Case b: <Suffix> is appended.
        e.g.: "39-59- /!"
        strips "39-59-" and adds "!" at the end of the
        number.

    Case c: <Prefix> is prepended and <Suffix> appended.
        e.g.: "39- 0/!"
        strips "39-", adds "0" at the beginning and "!"
        at the end.

    Case d: Nothing is prepended nor appended.
        e.g.: "/"
        The slash is needed to allow the correct
        interpretation of the subsequent fields, in the
        case of combined Dial/Cost table.

    No spaces are allowed between prefix, suffix and the
    separating slash.

The remaining fields are used as described in the "Cost Table"
section. If the <Cost> field is omitted, it is taken equal to
65535.

When searching for "PartPhone", the first matching entry is
applied: in the case of entries with an initial part in common,
you have to specify them in sequence from the longest to the
shortest. If no match is possible, the last line specifies the
default (thereby international) parameters.

WARNING: This table CANNOT be left totally empty: it must contain at
least the default entry  "- [<PreSuf>]".



  Example 1 (separate tables, European viewpoint):

        Dial
          39-59-      ; local
          39-      0  ; domestic
          -        00 ; international
        End


    "39-59": Country and District codes are stripped for
         local calls.

    "39-"  : Country code is stripped and replaced by "0"
         (domestic long distance code) for domestic
         calls.

    Others:  "00" (International access code) is prepended.



  Example 2a/b/c (combined tables, North American viewpoint):

    Since this one is a bit more complex, let's make clear
    some points.

    There are some groups of phone numbers:

    1 - Local numbers.
      These are usually "toll free" numbers.
      As a rule of thumb, you must only dial the local
      number, stripping the Country Code "1" and the
      Area Code.
      In the case you live at the crossroads of two or
      more area codes, it is possible that you have local
      numbers in area codes that you must _not_ strip.

    2 - Area Code numbers.
      They have your same Area Code but they are long
      distance.
      As far as I know, there are many different
      situations regarding the need to dial the long
      distance access code "1" and the Area Code.
      In any case you usually want to differentiate costs.

      The Country "1" and Area Codes must be stripped and
      replaced by:

      (a) the long distance access code "1"
      (b) the long distance access code "1" +
        the Area Code
      (c) nothing

      In case (b) the number really remains untouched.

      Even if the Country Code for USA/Canada "1" is
      numerically equal to your long distance acces code,
      they are conceptually quite different, and so they
      will be treated.

    3 - Domestic numbers.
      USA/Canada numbers, with a leading "1", that is the
      international Country Code for USA and Canada.
      They must be left untouched, since the american long
      distance access code is equal to the international
      Country Code for North America.

    4 - International numbers.
      These are numbers out of USA and Canada.
      They must be prefixed by "011", that is the
      international access code.

    And now let's see how to achieve our goal using
    FastLst's Dial Table.



  Example 2a:

    Let's suppose:

    - we are in Area Code 414
    - the 414 must be stripped for LD calls
    - the local exchanges are 231, 232, 233, 235, 236, 424


        Dial
                ; strip 1-414- from local numbers, do not add
                ; a prefix, set call and user costs to 0.

          LocalValues 1-414- / 0
          LocalExchanges 231 232 233 235 236 424

                ; Remaining "1-414-" numbers are long distance:
                ; strip the 414 Area Code and assign costs = 25.

          1-414-  1-  25

                ; Remaining "1-" numbers are Domestic Long Distance.
                ; Set costs to 50

          1-      1-  50

                ; Remaining numbers are international.
                ; Prepend 011 and set call cost to 250 and
                ; user cost to 500

          -       011 250 500
        End




  Example 2b:

    Let's suppose:

    - we are in Area Code 604
    - the 604 must NOT be stripped for LD calls
    - the local exchanges are 220 221 222 224 228 230 231 240
     241 244 250 251 252 253 254 255 257 258 261 263 264 266


        Dial
                ; strip 1-604- from local numbers, do not add
                ; a prefix, set call and user costs to 0.

          LocalValues 1-604- / 0
          LocalExchanges 220 221 222 224 228 230 231 240
          LocalExchanges 241 244 250 251 252 253 254 255
          LocalExchanges 257 258 261 263 264 266

                ; Remaining "1-604-" numbers are long distance:
                ; assign costs = 25.

          1-604-  1-604-  25

                ; Remaining "1-" numbers are Domestic Long Distance.
                ; Set costs to 50

          1-      1-  50

                ; Remaining numbers are international.
                ; Prepend 011 and set call cost to 250 and
                ; user cost to 500

          -       011 250 500
        End




  Example 2c:

    Let's suppose:

    - we are at the crossroads of Area Codes 510, 408, 415
    - "1-510" must always be stripped
    - "1-408" and "1-415" must never be stripped
    - some exchanges are toll-free, others are not


        Dial
                ; strip 1-510- from local numbers, do not add
                ; a prefix, set call and user costs to 0.

          LocalValues 1-510- / 0
          LocalExchanges 224 225 226 227 247 249 252 264 276
          LocalExchanges 278 293 317 353 354 416 417

                ; Specify local exchanges for area code 408,
                ; keep "1-408".

          LocalValues 1-408- 1-408- 0
          LocalExchanges 232 251 254 258 259 262 263 272 276
          LocalExchanges 321 324 325 383 428 432 433 434

                ; Specify local exchanges for area code 415,
                ; keep "1-415".

          LocalValues 1-415- 1-415- 0
          LocalExchanges 233 234 321 322 323 324 325 326 327
          LocalExchanges 328 329 354 424 462 473 493

                ; Remaining "1-510-" numbers are not free,
                ; the country and area codes are stripped.

          1-510- /      25

                ; Remaining numbers in area codes 408 and
                ; 415 are not free, nothing is stripped.

          1-408- 1-408- 25
          1-415- 1-415- 25

                ; Remaining numbers in country code "1"
                ; are domestic: nothing changed, cost 100.

          1-     1-     100

                ; Remaining numbers are international.
                ; Prepend 011 and set cost to 2000.

          -      011    2000

        End




  Example 3 (combined table, European viewpoint):

    The following combined table is equivalent to the
    separate "Example 3" for the Cost Table and Example 1
    for the Dial Table.


        Dial
          LocalValues 39-59- / 5
          LocalExchanges 2 3 4 81 82    ; urban
          39-59- /      30   ; district
          39-    0      60   ; domestic long distance
          43     0043- 100   ; Austria
          32     0032- 100   ; Belgium
          45     0045- 100   ; Denmark
          33     0033- 100   ; France
          49     0049- 100   ; Germany
          44     0044- 100   ; UK
          31     0031- 100   ; Netherlands
          34     0034- 100   ; Spain
          46     0046- 100   ; Sweden
          41     0041- 100   ; Switzerland
          1      001-  200   ; USA/Canada
          -      00    300   ; others
        End




  Example 4:

    Minimal table for sysops that make dial translations
    somewhere else.

        Dial
          -
        End



ΓòÉΓòÉΓòÉ 11.1.1.28. Modem Type Table ΓòÉΓòÉΓòÉ


            Modem Type Table


If you have a modem that does not need different dial strings
for different protocol connections, you can skip this section.
For Example a Zyxel modem usually needs one only dial string for
any type of connection (unless you do not use "Multi-Auto"
mode).

Instead, if you need different dial strings, you can use the
Modem_Type field in conjunction with some front-end feature that
allows to specify different dial strings for different modem
types ("ModemTrans" in Binkley).

Each entry in the TypeDef table has the following format:

<Flag> <Value>

<Flag> is a Nodelist flag (max 9 chars),
<Value> is a number 0->255.

The nodelist flags of each node are searched for <Flag>.
The <Flag> must match completely a nodelist flag: if <Flag> is
V32 and the nodelist flag is V32B, it's not a match.
The search is not case sensitive.

If <Flag> is found, the corresponding ModemType field is set to
<Value>, otherwise the next <Flag> is searched for.

The ModemType field of the compiled nodelist will be determined
by the first match only: If you define HST before V32, a node
with both V32 and HST will have a HST modem type.

The following examples are valid for Binkley's new "exact match"
modemtrans style only (for use of old bitwise style, see below).

WARNING: Please note that when you do not want Binkley to dial
out for certain modem types, you need to specify an empty dial
string in the modemtrans statement. Due to a bug of Binkley,
you must also avoid comments on those lines !


  Example 1:

    for USR Courier Dual Standard V.Everything:


        TypeDef
          V34   1 ; first choice
          VFC   2
          V32T  3
          H16   4
          V32B  5
          ZYX   5 ; ZYX implies V32B
          Z19   5
          Z16   5
          H14   6
          V32   7
          HST   8
        End



  In Binkley.Cfg you can use:


        ModemTrans   0 ATB0D/  ; default
        ModemTrans   1 ATB0D/  ; V34
        ModemTrans   2 ATB0D/  ; VFC
        ModemTrans   3 ATB0D/  ; V32T
        ModemTrans   4 ATB1D/  ; H16
        ModemTrans   5 ATB0D/  ; V32B, ZYX
        ModemTrans   6 ATB1D/  ; H14
        ModemTrans   7 ATB0D/  ; V32
        ModemTrans   8 ATB1D/  ; HST




  Example 2:

    for 2 lines, ISDN and USR DS V.Everything:

    The UISDNA, UISDNB, UISDNC entries are required only
    until the incorrect ",UISDNA," type entries are changed
    to the correct ",U,ISDNA," style or the ISDN flags become
    standard flags (not user defined as they currently are).


        TypeDef
          ISDNC  1
          UISDNC 1
          ISDNB  2
          UISDNB 2
          ISDNA  3
          UISDNA 3
          V34    4
          VFC    5
          V32T   6
          H16    7
          V32B   8
          ZYX    8 ; ZYX implies V32B
          Z19    8
          Z16    8
          H14    9
          V32   10
          HST   11
        End



  In Binkley.Cfg, ISDN line, you can use:

        ModemTrans   0
        ModemTrans   1 <ISDNC_Dial_String> ; ISDNC
        ModemTrans   2 <ISDNB_Dial_String> ; ISDNB
        ModemTrans   3 <ISDNA_Dial_String> ; ISDNA
        ModemTrans   4
        ModemTrans   5
        ModemTrans   6
        ModemTrans   7
        ModemTrans   8
        ModemTrans   9
        ModemTrans  10
        ModemTrans  11



  In Binkley.Cfg, USR line, you can use:

        ModemTrans   0 ATB0D/  ; default (2400)
        ModemTrans   1
        ModemTrans   2
        ModemTrans   3
        ModemTrans   4 ATB0D/  ; V34
        ModemTrans   5 ATB0D/  ; VFC
        ModemTrans   6 ATB0D/  ; V32T
        ModemTrans   7 ATB1D/  ; H16
        ModemTrans   8 ATB0D/  ; V32B, ZYX
        ModemTrans   9 ATB1D/  ; H14
        ModemTrans  10 ATB0D/  ; V32
        ModemTrans  11 ATB1D/  ; HST




  Example 3:

    for 2 lines, ISDN and analog, when you want both lines
    enabled to dial systems that have both ISDN and analog
    access. You usually should not want such a behaviour
    (why calling a ISDN system the analog way ?); however,
    if you really know what you are doing, here is a viable
    trick.

    You have to use the "BitType" mode (see below):

        BitType

        Typedef
          ISDNA 1
          ISDNB 1
          ISDNC 1
          V34   2
          VFC   2
          V32T  2
          V32B  2
          V32   2
        End



  In Binkley.Cfg, ISDN line, you can use:

        ModemTrans 0
        ModemTrans 1  <ISDN_Dial_String>  ; ISDN only
        ModemTrans 2
        ModemTrans 3  <ISDN_Dial_String>  ; ISDN + analog



  In Binkley.Cfg, analog line, you can use:

        ModemTrans 0 ATDT                 ; 2400
        ModemTrans 1
        ModemTrans 2 ATDT                 ; analog only
        ModemTrans 3 ATDT                 ; analog + ISDN




For compatibility with old Binkleys and derived systems, the
following statement is provided:

BitType

If you need old-style bit-oriented modem type, you must enable
this verb. In this case the "TypeDef" works differently:
- <Value> should be a power of 2 (1, 2, 4, 8, 16, 32, 64, 128).
- The ModemType will be determined by ORing all the <Value>s
 corresponding to <Flag>s that found a match in the nodelist
 flags.
- The dial string used by your front-end will be determined by
 the order of their specifications (the first ModemTrans that
 has some bit in common with the modem type will be used).

  Example for USR Courier Dual Standard V.Everything:

        BitType

        TypeDef
          V34   1 ; first choice
          VFC   2
          V32T  4
          H16   8
          V32B 16
          ZYX  16 ; ZYX implies V32B
          Z19  16
          Z16  16
          H14  32
          V32  64
          HST 128
        End



  In Binkley.Cfg you can use:


        ModemTrans   0 ATB0D/  ; default
        ModemTrans   1 ATB0D/  ; V34
        ModemTrans   2 ATB0D/  ; VFC
        ModemTrans   4 ATB0D/  ; V32T
        ModemTrans   8 ATB1D/  ; H16
        ModemTrans  16 ATB0D/  ; V32B, ZYX
        ModemTrans  32 ATB1D/  ; H14
        ModemTrans  64 ATB0D/  ; V32
        ModemTrans 128 ATB1D/  ; HST



ΓòÉΓòÉΓòÉ 11.1.1.29. User Flags Table ΓòÉΓòÉΓòÉ


            User Flags Table


This is an optional table used to handle the "user defined" bits
in the Flags word of the compiled nodelist entry.

These bits are named 5,6,7,8,9,A,B,D,E,F where bit 5 is the 6th
bit and F is the 16th bit of the word.

Using this table, you can associate (source) nodelist flags to user
defined bits in the output binary nodelist.

The table is delimited by the "FlagDef" and "End" keywords; each
line is in the form "<sFlag> <bFlags>" where <sFlag> is a flag
(max 9 chars) to be looked for in the source nodelists while
<bFlags> represents one or more user-defined bits in the output
Flags word.

  Example:

        FlagDef
          V42B  AB  ; V42B -> user bits A and B
          V32B  DE  ; V32B -> user bits D and E
        End



To add further flags on a node by node basis, please use the
"Flags <Addr> <Flags>" statement.

To remove flags, please specify the source flags via the
"NodeFlags <Addr> <NodeFlags>" statement.


ΓòÉΓòÉΓòÉ 11.1.2. Section B ΓòÉΓòÉΓòÉ


             G L O B A L

              Section B



The statements in this section affect the processing of all
the output blocks and thereby of all the input nodelists.

These statements can also be used in the "OUTPUT" section of an
OUTPUT block or inside an INPUT block, in which case they affect
the compilation of the relevant block only.

In the case you use a verb that has already been used in a
"higher level" block, it will behave as a local override.


ΓòÉΓòÉΓòÉ 11.1.2.1. NeededBeforeKill ΓòÉΓòÉΓòÉ


NeededBeforeKill

    Tells FastLst that the affected NodeList(s) are needed
    by the command run via the "BeforeKillSource" statement.

    The "BeforeKillSource" verb allows you to run a command
    (executable or batch file) after the compilation has
    completed, just before FastLst ends and (if "KillSource"
    is used) deletes the source files that are also present
    in archived form.

    The lists affected by "NeededBeforeKill" are extracted,
    if not already present, before the "BeforeKillSource"
    command is executed.


ΓòÉΓòÉΓòÉ 11.1.2.2. ArcMethod ΓòÉΓòÉΓòÉ


ArcMethod <meth>[,<f>] ...

    Tells FastLst that it must make sure that all new
    nodelists are archived using the specified methods.
    The original archive is NOT killed.

    Obviously, a new nodelist is not rearchived to its
    original method.

    <meth> is the name of an archiver defined in
    compress.cfg.

    <f> is the optional specification of the letter to be
    used for the variable archive extension. If not
    specified, it is assumed equal to the first letter of
    the defaults extension for this archiver.

    Multiple ArcMethod statements are allowed.


  Example 1:

    ArcMethod ZIP LH,H

    NodeList.Z48 arrives: it is archived to NodeList.H48
    also, using the LH archiver.


  Example 2:

    ArcMethod ZIP LH

    NodeDiff.Z48 arrives: the resulting nodelist is archived
    to NodeList.Z48 using the ZIP archiver and to
    NodeList.L48 using LH.


ΓòÉΓòÉΓòÉ 11.1.2.3. ArcDiffMethod ΓòÉΓòÉΓòÉ


ArcDiffMethod <meth>[,<f>] ...

    Tells FastLst that it must make sure that all new
    nodediffs are archived using the specified methods.
    The original archive is NOT killed.

    Obviously, a new nodediff is not rearchived to its
    original method.

    <meth> is the name of an archiver defined in
    compress.cfg.

    <f> is the optional specification of the letter to be
    used for the variable archive extension. If not
    specified, it is assumed equal to the first letter of
    the defaults extension for this archiver.

    Multiple ArcDiffMethod statements are allowed.


  Example:

    ArcDiffMethod ZIP LH,H

    NodeDiff.Z48 arrives: it is archived to NodeDiff.H48
    also, using the LH archiver.



ΓòÉΓòÉΓòÉ 11.1.2.4. External Commands ΓòÉΓòÉΓòÉ


            EXTERNAL COMMANDS


The following verbs allow to invoke external commands.

<command> can be any legal command-line command: it can be the
name of an executable file, a batch file or any command that can
be understood by your command-line interpreter (OS/2's CMD,
4OS2, etc.).

If <command> does not directly invoke an executable file,
FastLst automatically invokes your default command line
interpreter (as specified by the COMSPEC environment variable).


ΓòÉΓòÉΓòÉ 11.1.2.4.1. Archive Related Commands ΓòÉΓòÉΓòÉ

          Archive Related Commands


The following verbs share the same syntax:

Two parameters are allowed in <command>:

%a is translated to the full pathname of the archive file.

%f is translated to the name of the file to be added or
  extracted (no path).

<command> is run from the path where %f belongs.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.1. BeforeArcList ΓòÉΓòÉΓòÉ


BeforeArcList <command>

    Command to be run before archiving a nodelist.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.2. AfterArcList ΓòÉΓòÉΓòÉ


AfterArcList <command>

    Command to be run after archiving a nodelist.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.3. BeforeUnArcList ΓòÉΓòÉΓòÉ


BeforeUnArcList <command>

    Command to be run before extracting a nodelist.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.4. AfterUnArcList ΓòÉΓòÉΓòÉ


AfterUnArcList <command>

    Command to be run after extracting a nodelist.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.5. BeforeArcDiff ΓòÉΓòÉΓòÉ


BeforeArcDiff <command>

    Command to be run before archiving a nodediff.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.6. AfterArcDiff ΓòÉΓòÉΓòÉ


AfterArcDiff <command>

    Command to be run after archiving a nodediff.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.7. BeforeUnArcDiff ΓòÉΓòÉΓòÉ


BeforeUnArcDiff <command>

    Command to be run before extracting a nodediff.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.8. AfterUnArcDiff ΓòÉΓòÉΓòÉ


AfterUnArcDiff <command>

    Command to be run after extracting a nodediff.


ΓòÉΓòÉΓòÉ 11.1.2.4.1.9. Example ΓòÉΓòÉΓòÉ

              Example

To hatch the new nodelist (note that you probably need to
specify the location of the config file since the command is
executed from the directory where %f resides):

  AfterArcList Hatch %a NODELIST "New NodeList"



ΓòÉΓòÉΓòÉ 11.1.2.4.2. NodeDiff Related Commands ΓòÉΓòÉΓòÉ


          NodeDiff Related Commands


The following verbs accept different parameters:

%l is translated to the full pathname of the nodelist.

%d is translated to the full pathname of the nodediff.

<command> is run from the current directory.


ΓòÉΓòÉΓòÉ 11.1.2.4.2.1. BeforeEdit ΓòÉΓòÉΓòÉ


BeforeEdit <command>

    Command to be run before applying a nodediff.


ΓòÉΓòÉΓòÉ 11.1.2.4.2.2. AfterEdit ΓòÉΓòÉΓòÉ


AfterEdit <command>

    Command to be run after applying a nodediff.
    Only %l can be used.


ΓòÉΓòÉΓòÉ 11.1.3. Section C ΓòÉΓòÉΓòÉ


             G L O B A L

              Section C



The statements in this section affect the processing of all
the output blocks and thereby of all the input nodelists.

These statements can also be used in the "OUTPUT" section of an
OUTPUT block (except for the "NoCompile" one) or inside an INPUT
block, in which case they affect the compilation of the relevant
block only.

In the case you use a verb that has already been used in a
"higher level" block, it will behave as a local override.


ΓòÉΓòÉΓòÉ 11.1.3.1. MsgRem ΓòÉΓòÉΓòÉ


MsgRem [<string>]

    If MsgRemArea is used, FastLst reports the following
    comments:

    No MsgRem statement: none;

    MsgRem with no <string>: all;

    MsgRem with <string>: only the comments that begin with
    ";<l> " where <l> is one of the characters in <string>.

    The ";" character in <string> means that the comments
    beginning with "; " or ";<word>" can be reported.

    Common types of comment lines:

        ;S This is a comment for SysOps
        ;U This is a comment for users
        ;F This comment should appear in formatted Fido lists
        ;A This is a comment of general interest
        ;E This comment is an error message


  Example:

    "MsgRem SE"

    Only comments destined to SysOps and Error messages are
    reported (lines beginning with ";S " and ";E ").


ΓòÉΓòÉΓòÉ 11.1.3.2. MsgLog ΓòÉΓòÉΓòÉ


MsgLog [NullPhone] [Redirected] [Points]

    Some common situations (not really errors) are not
    reported to MsgLogArea by default: if you want FastLst
    to report them anyway, you can use this statement, but
    be aware that very long reports could come out.

    "NullPhone": systems with empty phone string are logged.

    "Redirected": systems redirected to their coordinators
    are logged (Hold, unpublished).

    "Points": points with empty phone string are logged; be
    aware that most pointlists contain unpublished (thereby
    with empty phone) points.

 Examples:

    MsgLog Redirected
    MsgLog Redirected NullPhone


ΓòÉΓòÉΓòÉ 11.1.3.3. GermanPointList ΓòÉΓòÉΓòÉ


GermanPointList

    Instructs FastLst to consider the affected nodelist as a
    3D German style pointlist. Zone 2 is assumed, if not
    explicitly specified in the "NodeList" statement.

    This verb is usually used inside an Input Block, so that
    it affects that nodelist only.

    WARNING: Be aware that using this statement in the
    global section or in an Output block affects all the
    involved nodelists !

  Example Input Block:

        NodeList Points24.???
          GermanPointList
          Nodediff Pr24Diff.???
          ArcList Points24.??? 1
          ArcDiff Pr24Diff.??? 5
          ArcListDesc R24 PointList for day %d (%D), %a format
          ArcDiffDesc R24 PointDiff for day %d (%D), %a format



ΓòÉΓòÉΓòÉ 11.1.3.4. BeforeCompile ΓòÉΓòÉΓòÉ


BeforeCompile <command>

    Command to be run before compiling the affected nodelist.

    This statement follows the same rules explained in
    "External Commands" in section B.

    The %l parameter is translated to the full pathname of
    the nodelist.

    <command> is run from the current directory.


ΓòÉΓòÉΓòÉ 11.1.3.5. AfterCompile ΓòÉΓòÉΓòÉ


AfterCompile <command>

    Command to be run after compiling the affected nodelist.

    This statement follows the same rules explained in
    "External Commands" in section B.

    The %l parameter is translated to the full pathname of
    the nodelist.

    <command> is run from the current directory.


ΓòÉΓòÉΓòÉ 11.1.3.6. SysOpLst ΓòÉΓòÉΓòÉ


SysOpLst

    Output SysOp data from all the input nodelists to the
    output list (FidoUser.Lst) and/or index (Sysop.ndx).

  Example:

    SysOpLst


ΓòÉΓòÉΓòÉ 11.1.3.7. FidoTxt ΓòÉΓòÉΓòÉ


FidoTxt [<FidoTxt>]

    Generate an 80 Column Text List of nodes.
    Nodes included via the "Node,..." method and points are
    excluded.

    <FidoTxt> optionally specifies an output file name,
    which defaults to "NodeList.Txt". If the same file name
    has already been used for other nodelists, the output is
    appended.

  Example:

    FidoTxt


ΓòÉΓòÉΓòÉ 11.1.3.8. FidoPrn ΓòÉΓòÉΓòÉ


FidoPrn [<FidoPrn>]

    Generate a 132 Column Text List of nodes.
    Nodes included via the "Node,..." method and points are
    excluded.

    <FidoPrn> optionally specifies an output file name,
    which defaults to "NodeList.Prn". If the same file name
    has already been used for other nodelists, the output is
    appended.

  Example:

    FidoPrn


ΓòÉΓòÉΓòÉ 11.1.3.9. IncCoord ΓòÉΓòÉΓòÉ


IncCoord <CoordLev>

    The coordinators of the specified and upper levels will
    be always included, even if excluded by "IncAddr" and
    "ExcAddr". <CoordLev> can be ZC, RC, NC, HC.

  Example:

    IncCoord NC


ΓòÉΓòÉΓòÉ 11.1.4. Export Section ΓòÉΓòÉΓòÉ


           Global Export Section


You can use here the statements described in the "Export Global
Section" of the "Export Block" (see "Input Block" inside "Output
Block").



ΓòÉΓòÉΓòÉ 11.2. Output Block ΓòÉΓòÉΓòÉ


          O U T P U T  B L O C K



The following verbs define the compilation of a single output
binary nodelist.

The block begins with a "Output Section", that affects the
compilation of all the source (input) nodelists, followed by a
sequence of "Input Blocks" that define how to handle each of the
source nodelists.

The first "output block" can be of a special kind: if the
"NoCompile" statement is used instead of "Version7", this block
indicates the actions necessary to maintain the specified
nodelists, but they are not compiled.


ΓòÉΓòÉΓòÉ 11.2.1. Version7 ΓòÉΓòÉΓòÉ


Version7 <Path> <Nodex> [<SysopNdx>]

    Start of a block of config verbs defining the generation
    of a Version 7 nodelist. You can generate one or more
    Version 7 nodelists with different names and path for
    the output files. Each "Version7" statement marks the
    beginning of a new output-nodelist definition.

    <Path> is the path where the output binary data and
    index files are placed.

    <Nodex> is the file name (no extension) for the data
    (.DAT) and address-index (.NDX) files.

    <SysopNdx> is the file name for the sysop-index.
    When no extension is given, .NDX is assumed if
    <SysopNdx> is different from <Nodex>, otherwise the .SDX
    extension is used.

    If you omit <SysopNdx>, no V7 SysOp-index will be
    generated.

    The usual names for V7 files are <Nodex>="NODEX" and
    <SysopNdx>="SYSOP".

    All the following verbs, up to the next "Version7" (if
    any), are related to the preceding "Version7" output
    files.

  Examples:

                                          ; SysOp Index name
        Version7 d:\bbs\v7\ NODEX  SYSOP  ; SYSOP.NDX
        Version7 d:\bbs\v7\ NODEX  NODEX  ; NODEX.SDX



ΓòÉΓòÉΓòÉ 11.2.2. NoCompile ΓòÉΓòÉΓòÉ


NoCompile

    This verb can be used to start the first "Output Block",
    instead of "Version7".

    This way the first output block becomes a "NoCompile"
    block and the indicated nodelists are maintained but not
    compiled.

    This is a means for maintaining a NodeList (applying
    nodediffs, archiving with different archivers etc.)
    without compiling it.

    The statements related to nodelist compilation (see
    Global section C) are obviously illegal in a "NoCompile"
    block.



ΓòÉΓòÉΓòÉ 11.2.3. Output section ΓòÉΓòÉΓòÉ


           O U T P U T  Section


The following verbs affect the compilation of the current output
block and must precede the definitions of the input blocks
(which start with the Nodelist statement).


ΓòÉΓòÉΓòÉ 11.2.3.1. FidoUserLst ΓòÉΓòÉΓòÉ


FidoUserLst [<FidoUserLst>]

    Generate "fidouser.lst style" text SysOp list.
    <FidoUserLst> optionally specifies an output file name,
    which defaults to "FidoUser.Lst". Different output
    blocks require different names.

  Example:

    FidoUserLst


ΓòÉΓòÉΓòÉ 11.2.3.2. SysDup ΓòÉΓòÉΓòÉ


SysDup <AddrLst>

    When a SysOp name is present in various nodes, all the
    name/address couples are kept in the SysOp lists
    (fidouser.lst/sysop.ndx). If you want to keep only one
    address you can use one or more SysDup lines: the SysOps
    who have the addresses listed in <AddrLst> will be
    present in the output sysop lists with the specified
    address only. You can use abbreviated addresses, if you
    like, provided that the first address of every "SysDup"
    is complete (FastLst cannot make any assumption for the
    first item in a list).

  Example:

    SysDup 2:332/504 505 336/980 3:25/28.27


ΓòÉΓòÉΓòÉ 11.2.3.3. Block Specifications ΓòÉΓòÉΓòÉ


            Block Specifications


You can use here the same statements described in the "Global
Section B" and (if this is not a "NoCompile" block) "Global
Section C" and "Export Global Section" (see the Export Block
below).


ΓòÉΓòÉΓòÉ 11.2.3.4. Address Specific Stuff ΓòÉΓòÉΓòÉ


           ADDRESS SPECIFIC STUFF



The following verbs define address specific stuff that will
affect the compilation of all the source nodelists compiled in
the current output block. These statements are illegal in a
"NoCompile" block.

If you prefer, you can specify this type of information in the
"Address Specific Stuff" section of the pertinent input block.

WARNING: make sure all addresses have full info (incl. zone).


ΓòÉΓòÉΓòÉ 11.2.3.4.1. Password ΓòÉΓòÉΓòÉ


Password <Addr> <Password>

    Allows to specify <Password> one <Addr> at a time.

    Version 7 has no limit on password length, however the
    programs that use it are usually limited to 8 chars.
    Some (rare) programs have problems with 8 chars and need
    a maximum of 7 or 6 chars.

  Example:

    Password 2:332/504.4 Password


ΓòÉΓòÉΓòÉ 11.2.3.4.2. PasswordFile ΓòÉΓòÉΓòÉ


PasswordFile <PasswordFile>

    Allows to include a password file that contains many
    address/password couples, one per line.

    In this file you can omit the "Password" keyword.

    If you like, you can use some "Password" keywords
    together with one "PasswordFile", however you cannot use
    more than one "PasswordFile".

    Please note that the definitions found in this file have
    effect on the current (Output or Input) block ONLY.

    FastLst writes to the log file which source or output
    nodelist is affected by each passwordfile; so, in case
    of doubts, just check the logs.

  Example:

    PasswordFile fidonet.pwd


ΓòÉΓòÉΓòÉ 11.2.3.4.3. Phone ΓòÉΓòÉΓòÉ


Phone <Addr> [#]<Phone> [<NodeFlags> [<Cost> [<UCost>]]]

    Allows to override a nodelist phone number and
    optionally the corresponding "NodeFlags" and costs.


    If '#' is prefixed, <Phone> is taken verbatim (dial
    translation not performed, costs default to the values
    specified with the "CostVerbatimPhone" statement).

    If '#' is NOT used, <Phone> MUST be in the form used in
    the source nodelist.

    The verbatim form may be handy for specifying internet
    addresses and script names.

    In the case you want to specify an empty phone, use the
    '#' alone.

    <NodeFlags> has the same meaning as in the NodeFlags
    statement. To specify an overriding empty <NodeFlags>,
    use a single comma.

    <Cost> and <UCost> have the same meaning as in the Cost
    statement.


  Examples:

    <Phone> override only:

        Phone 2:332/501.1 39-59-399999      ; Normal override
        Phone 2:332/501.0 #499999           ; Verbatim override
        Phone 3:456/789   #                 ; Empty phone
        Phone 1:106/2000  #juge*com         ; internet address
        Phone 1:123/4567  #123*456*789*012  ; IP address
        Phone 2:245/6789  #"Bob.scr"        ; quoted script name


    <Phone> and <NodeFlags> overrides:

        Phone 2:332/501.0 #499999 V34,CM    ; Flags override
        Phone 2:332/501.1 39-59-399999 ,    ; No-flags override


    <Phone>, <NodeFlags> and <Cost>/<UCost> overrides:

        Phone 2:332/501 #499999 V34,CM 10 0 ; Different Costs
        Phone 2:332/502 #mega.com VMP 0     ; <Cost> == <UCost>



ΓòÉΓòÉΓòÉ 11.2.3.4.4. NodeFlags ΓòÉΓòÉΓòÉ


NodeFlags <Addr> <NodeFlags>

    Allows to substitute the flags listed in the nodelist
    entry of <Addr>.

    If you want to change the CM flag or modem type flags
    (HST, V32b, ZYX) etc, you can use this verb. Please note
    that the old flags are lost, so you need to indicate all
    the necessary flags.

    Please note that <NodeFlags> might be empty.

  Example:

    NodeFlags 2:332/501.0 CM,H16,V32b


ΓòÉΓòÉΓòÉ 11.2.3.4.5. Flags ΓòÉΓòÉΓòÉ


Flags <Addr> <Flags>

    The Flags statement allows to set the "user defined"
    bits in the Flags word of the compiled nodelist entry.
    These bits are named 5,6,7,8,9,A,B,D,E,F where bit 5 is
    the 6th bit and F is the 16th bit of the word.

    These bits are "ORed" with those already set by the
    "FlagDef" table.

    If you need to zero some of the bits, please specify the
    source flags with the "NodeFlags" statement.

  Example:

    Flags 2:332/501.0 AB5  ; Set bits 5,A & B.


ΓòÉΓòÉΓòÉ 11.2.3.4.6. Cost ΓòÉΓòÉΓòÉ


Cost <Addr> <Cost> [<UCost>]

    <Cost> and <UCost> are in the range 0->65535.
    Overrides the Cost and User_Cost fields of <Addr> in the
    compiled nodelist. If no <UCost> is given, it's taken
    equal to <Cost>.

  Example:

    Cost 2:332/501.0 150


ΓòÉΓòÉΓòÉ 11.2.3.5. Segment Selection ΓòÉΓòÉΓòÉ


            SEGMENT SELECTION


The following verbs allow to include or exclude selected
<NodeList> segments. If you do not use them, the full <NodeList>
is compiled. Be aware that the process of checking each address
against the list of segments to be included or excluded might
slow down the compilation, even if some gain could come from the
exclusion of large segments.

These statements are obviously illegal in a "NoCompile" block.

These statements can be used in an Input block to affect that
nodelist only.


ΓòÉΓòÉΓòÉ 11.2.3.5.1. IncAddr ΓòÉΓòÉΓòÉ


IncAddr <PartAddrLst>

    If you want to selectively include nodelist segments,
    you can use this option: only zones, regions, nets,
    hubs, nodes, points that are listed in <PartAddrLst>
    will be present in the output files. You can specify
    zone, region/net, hub/node and point numbers.

  Example:

    IncAddr 1 2:33 2:200/100 3:632 4:801/17

     Compiles: zone 1, region 33 of zone 2, hub 100 of net
     200 of zone 2, net 632 of zone 3, node 4:801/17


ΓòÉΓòÉΓòÉ 11.2.3.5.2. ExcAddr ΓòÉΓòÉΓòÉ


ExcAddr <PartAddrLst>

    If you want to exclude some segments from the
    compilation, you can list them in <PartAddrLst>, in the
    same way as for "IncAddr". You can use either "IncAddr"
    or "ExcAddr" or both of them to Include only selected
    segments and exclude sub-segments.

  Example:

    ExcAddr 2:332/500

     Excludes Hub 500 of net 332 of zone 2.


ΓòÉΓòÉΓòÉ 11.2.3.5.3. IncSysOp ΓòÉΓòÉΓòÉ


IncSysOp <PartAddrLst>

    If not used, all the SysOp entries of the compiled
    segments will be in the output SysOp list/index (if
    SysOpLst is active). If you want to limit the SysOp
    entries to selected segments, you can use this verb,
    listing partial addresses in <PartAddrLst>. SysOps from
    segments excluded from compilation via "IncAddr" and
    "ExcAddr" will obviously never be present in the SysOp
    list/index anyway.

  Example:

    IncSysOp 2

     Includes only SysOps from zone 2.


ΓòÉΓòÉΓòÉ 11.2.4. Input Block ΓòÉΓòÉΓòÉ


           I N P U T  B L O C K


The Input Block starts with a "NodeList" statement and continues
until the start of the next Input or Output Block (NodeList or
Version7 statement respectively) or the end of the configuration
file.


ΓòÉΓòÉΓòÉ 11.2.4.1. NodeList ΓòÉΓòÉΓòÉ


NodeList <NodeList> [<PartAddr>]

    Start of a block of config verbs defining the processing
    of the specified <NodeList> file. You can use many
    "NodeList" statements to compile several different
    source nodelists into the same output files specified by
    the preceding "Version7" statement. Each "NodeList" verb
    marks the beginning of a new input-nodelist
    processing-info block.

    When an address is present in more than one <NodeList>
    (e.g. you compile both the full nodelist and the faster
    updated local region or zone segment) only the entry
    found in the last compiled <NodeList> is put in the
    indexes. To have the most up-to-date entries in your V7
    indexes, please include local segments after the larger
    list.

    <NodeList> is the name of the input nodelist.
    If you don't specify a path, <InputPath> is assumed.

    If a terminal ".???" is specified, all the files with 3
    digits in the place of '???' are examined and that with
    the latest 3 digit day of the year is chosen for
    compilation.

    The optional <PartAddr> is a partial address that must
    be specified for nodelist segments that do not have full
    address info. For example, a REGION segment usually
    starts with the "Region," keyword and does not contain
    any Zone info: its up to you to tell FastLst which zone
    we are talking about. Analogously you should provide
    zone and net info when compiling a Hub segment. The
    region is assumed equal to the net number of the partial
    address, the hub equal to the node number.

  Examples:

    IMPORTANT: Please note that the following lines
      represent a list of examples, NOT an example of
      multiple nodelist compilation.
      After each "NodeList" verb, you must specify all the
      statements that affect the compilation of that
      particular source file.


        NodeList nodelist.???   ; Fidonet nodelist

        NodeList region.033 2   ; Region 33 list, zone 2

        NodeList region24.??? 2 ; Region 24 list, zone 2

        NodeList net.332 2:33   ; Net list, zone 2, region 33

        NodeList hub.500 2:332  ; Hub list, zone 2, net 332

        NodeList locnode.500 2:332/500 ; Some nodes in zone 2,
                                       ; net 332, hub 500

        NodeList points.504 2:332/504  ; Points of 2:332/504
                                       ; in "Point," format.

        NodeList morenode.lst   ; Some nodes in the "Node,"
                                ; format. No <PartAddr> required
                                ; since the "Node," line gives
                                ; full address info.

        NodeList ptlist.???     ; Point List in the "Boss,"
                                ; format. No <PartAddr> required
                                ; since the "Boss," line gives
                                ; full address info.



ΓòÉΓòÉΓòÉ 11.2.4.2. Input Section ΓòÉΓòÉΓòÉ


             Input Section


The following statements affect the handling of the nodelist
specified by the last "NodeList" statement (current Input
Block).


ΓòÉΓòÉΓòÉ 11.2.4.2.1. NodeDiff ΓòÉΓòÉΓòÉ


NodeDiff <NodeDiff>

    <NodeDiff> is the name of the nodediff file.
    If you don't specify a path, <InputPath> is assumed.

    <NodeDiff> must terminate with ".???". FastLst will
    search for a suitable <NodeDiff>, considering the files
    that have a 3 digit day of the year in the place of the
    trailing '???'.

  Example:

    NodeDiff NODEDIFF.???


ΓòÉΓòÉΓòÉ 11.2.4.2.2. ArcList ΓòÉΓòÉΓòÉ


ArcList <ArcList> [<Keep#>]

    You can specify the name of the archive containing
    <NodeList>. It is necessary if you use automatic
    extraction/rearchiving, but it can even be used only to
    delete old files.

    <ArcList> is used to extract new nodelists, to compress
    them using the methods defined in "ArcMethod", to
    compress the new nodelists after the application of
    nodediffs.

    If <ArcList> has a terminating ".???", all the files
    that have a suitable fixed (.zip, .lzh etc.) or variable
    (.z10, .z17, .l10, .l17 etc.) extension are considered,
    taking the digits as the last 2 digits of the day of the
    year.

    If you really want to limit search to a specified fixed
    or variable extension, you can do:
    "ArcList nodelist.zip", to consider .zip only;
    "ArcList nodelist.z??", to consider .z?? only.

    <Keep#> optionally specifies the number of archives to
    be kept, basing on the day of the year (the modification
    file date is also used to infer the correct
    chronological order).

    If you maintain archives with multiple different
    extensions (.z??, .l??, etc.) the actual number of files
    increases, since multiple files with the same day
    extension count for one.

    The description associated to the deleted files is
    removed from FILES.BBS.

  Example:

    ArcList nodelist.??? 1


ΓòÉΓòÉΓòÉ 11.2.4.2.3. ArcDiff ΓòÉΓòÉΓòÉ


ArcDiff <ArcDiff> [<Keep#>]

    You can specify the name of the archive containing
    <NodeDiff>. It is necessary if you use automatic
    extraction/rearchiving, but it can even be used only to
    delete old files.

    <ArcDiff> must terminate with ".???".

    All the files that have 2 digits in the place of the
    last 2 '?' are examined, taking the digits as the last 2
    digits of the day of the year.

    If you really want to limit search to a specified
    extension, you can do:
    "ArcDiff nodediff.z??", to consider .z?? only.

    <Keep#> optionally specifies the number of archives to
    be kept, basing on the day of the year (the modification
    file date is also used to infer the correct
    chronological order). In the case of multiple archive
    extensions, the actual number increases consequently.

    The description associated to the deleted files is
    removed from FILES.BBS.

  Example:

    ArcDiff nodediff.??? 5


ΓòÉΓòÉΓòÉ 11.2.4.2.4. ArcListDesc/ArcDiffDesc ΓòÉΓòÉΓòÉ


ArcListDesc <Desc>
ArcDiffDesc <Desc>

    You can specify a description to be added to FILES.BBS
    for the new nodelist and nodediff files created by
    FastLst.

    Some parameters are available:

    %d : the 3 digit day number (0 padded)
    %a : the archiver name
    %D : the date, USA format (Feb 10, 1995)
    %L : the date, Local format

  Example:

        ArcListDesc Fido Nodelist for day %d (%D), %a format
        ArcDiffDesc Fido Nodediff for day %d (%D), %a format



ΓòÉΓòÉΓòÉ 11.2.4.3. Local Specifications ΓòÉΓòÉΓòÉ


            Local Specifications


You can use here the same statements described in the "Global
Section B" and (if we are not in a "NoCompile" block) "Global
Section C" and "Export Global Section" (see the Export Block
below).


ΓòÉΓòÉΓòÉ 11.2.4.4. Address Specific Stuff ΓòÉΓòÉΓòÉ


           ADDRESS SPECIFIC STUFF


You can specify here the address specific stuff that is related
to the current source nodelist (if not inside a "NoCompile"
block).

If you have already used the "Output section" for specifying
this kind of information, you can skip this section.

WARNING:

Often you will compile segments of a previously compiled
nodelist. For example you could have a "NodeList nodelist.???"
block for the world nodelist and then a "NodeList region.033"
block for your region's nodelist segment.

The majority of entries in the latter will be duplicates of
entries already found in the former. However, in the case of
duplicates, only the entries found in the last involved
"NodeList" block will go to the indexes and be active. This way
you can compile the full world nodelist while keeping your
segment up-to-date with local segments that get updated faster
than the full nodelist.

When you have to specify "Address Specific Stuff" for nodes that
are present in more than one "NodeList", you must do that in the
last involved "NodeList" block (or in the Output Section, of
course), otherwise your indications will have no effect.

For a list of allowed statements, please see the "Address
Specific Stuff" section of the "Output" section above.


ΓòÉΓòÉΓòÉ 11.2.4.5. Segment Selection ΓòÉΓòÉΓòÉ


            SEGMENT SELECTION


You can use here the same statements described in "Segment
Selection" in the Output Section (if not inside a "NoCompile"
block).


ΓòÉΓòÉΓòÉ 11.2.4.6. Export Block ΓòÉΓòÉΓòÉ


             EXPORT Block


FastLst can "export" segments of nodelist: e.g. you can export
the Region 25 from the world nodelist to a file called
Region25.???, where ??? stands for the day of the year. Note
that this feature is for exporting segments of nodelist to a
dedicated file. To compile segments you should continue using
the "Segment Selection" section of FastLst.Cfg.

These blocks MUST be at the _END_ of an "Input Block"; there can
be multiple Export Blocks in a single Input Block.

Obviously the Export Block is available for compiled nodelists
only, thus it is illegal inside a "NoCompile" block.

The export is done ONLY when a new NodeList is found (or when
the file to be exported exists neither in uncompressed nor in
archived form), even if the config file is changed. So, you can
safely hatch the created arcfile via the AfterArcExport command
with no danger of hatching it all the times you change something
in the cfg. Under these conditions, if you really want to export
anyway, you must use the -i command line switch.

IMPORTANT: If you use the same export filename for multiple
source nodelists, all the exported segments are appended one
another. This way, if you like, you can make FastLst generate a
"plain" nodelist file with many different source nodelists in
it, just appended one after another. Some people need this
feature to create input for some other program. For this feature
to work, you need to specify the '+' parameter in the "Export"
statement. See "Export Example" below.


ΓòÉΓòÉΓòÉ 11.2.4.6.1. Export ΓòÉΓòÉΓòÉ


Export [+] <file> [<PartAddrLst>]

    The '+' sign must be specified when you want to create a
    joined list by exporting multiple nodelists to the same
    export <file>. This way the exported file will be
    created every time the nodelist is compiled and its
    timestamp will not be changed to be equal to the source.

    <file> is the name of the file to which you want to
    export the selected segment(s).

    <PartAddrLst> is the partial address list of segments to
    be exported. Usually it is a single partial address.
    If omitted, the entire nodelist is exported (useful to
    create a joined nodelist).

    This statement marks the start of an "Export Block".
    Multiple "Export Blocks" are allowed in the same "Input
    Block".

    N.B. The Export blocks must be at the _END_ of an input
    block. See "Export Example" below.

  Example:

    Export region25.??? 2:25



ΓòÉΓòÉΓòÉ 11.2.4.6.2. Export Section ΓòÉΓòÉΓòÉ


             Export Section


The following verbs define the parameters for the Export
specified by the last "Export" statement.


ΓòÉΓòÉΓòÉ 11.2.4.6.2.1. ArcExport ΓòÉΓòÉΓòÉ


ArcExport <arcfile> [Keep#]

    <arcfile> is the name of the archive file to which you
    want to compress the exported <file>.

    [Keep#] is the optional number of archive versions to be
    kept, basing on the day of the year (the modification
    file date is also used to infer the correct
    chronological order).

  Example:

    ArcExport region25.??? 2


ΓòÉΓòÉΓòÉ 11.2.4.6.2.2. ArcExportDesc ΓòÉΓòÉΓòÉ


ArcExportDesc <description>

    <description> is the description to be applied to
    FILES.BBS when a new archive is created.

  Example:

    ArcExportDesc Region 25 %D, %a format



ΓòÉΓòÉΓòÉ 11.2.4.6.3. Export Global Section ΓòÉΓòÉΓòÉ


           Export Global Section


The following verbs can be used in the "Export Section" of an
"Export Block", in the "Input Section" of an "Input Block", in
the "Output Section" of an "Output Block", in the "Global
Section".

In few words, they are legal everywhere except for the
"NoCompile" block.

Depending on their positions, they affect the involved nodelists
only.


ΓòÉΓòÉΓòÉ 11.2.4.6.3.1. ArcExportMethod ΓòÉΓòÉΓòÉ


ArcExportMethod <meth>[,<f>] ...

    Specifies the archive type(s) to be created for the
    exported file.

    <meth> is the archiver name as defined in Compress.Cfg.

    <f> is the optional first letter to be used for variable
    archive extensions.

  Example:

    ArcExportMethod zip lh,H


ΓòÉΓòÉΓòÉ 11.2.4.6.3.2. BeforeArcExport/AfterArcExport ΓòÉΓòÉΓòÉ


BeforeArcExport <command>
AfterArcExport <command>

    Commands to be run before/after archiving the exported
    file.

    <command> can be any type of command (executable file,
    batch file, internal command, alias, etc.) and supports
    the %a (full archive name) and %f (name of the file to
    be compressed, no path) and is run from the directory
    where %f resides.

    WARNING: since <command> is executed from the directory
    where the file to be compressed belongs, you might need
    to specify the location of the config files used by the
    programs invoked via <command>.

  Example:

    AfterArcExport Hatch %a


ΓòÉΓòÉΓòÉ 11.2.4.6.3.3. ExportNeededBeforeKill ΓòÉΓòÉΓòÉ


ExportNeededBeforeKill

    Specifies that the exported file is needed by the
    "BeforeKillSource" command.


ΓòÉΓòÉΓòÉ 11.2.4.6.4. Export Example ΓòÉΓòÉΓòÉ


  Export Example:

        NodeList nodelist.???
          NodeDiff nodediff.???
          ArcList  nodelist.??? 2
          ArcDiff  nodediff.??? 5
          ArcListDesc Fido Nodelist for day %d (%D), %a format
          ArcDiffDesc Fido Nodediff for day %d,(%D), %a format
          Export region25.??? 2:25
            ArcExport region25.??? 1
            ArcExportDesc Region 25 %D, %a format
            ArcExportMethod zip lh
            AfterArcExport Hatch %a
          Export region24.??? 2:24
            ArcExport region24.??? 1
            ArcExportDesc Region 24 %D, %a format
            ArcExportMethod zip



  Export Example to generate a joined list:

        NodeList nodelist.???
          NodeDiff nodediff.???
          ArcList  nodelist.??? 2
          ArcDiff  nodediff.??? 5
          ArcListDesc Fido Nodelist for day %d (%D), %a format
          ArcDiffDesc Fido Nodediff for day %d,(%D), %a format
          Export + megalist.Lst

        NodeList zonelist.???
          NodeDiff zonediff.???
          ArcList  zonelist.??? 2
          ArcDiff  zonediff.??? 5
          ArcListDesc Zonelist for day %d (%D), %a format
          ArcDiffDesc Zonediff for day %d,(%D), %a format
          Export + megalist.Lst
            ArcExport megalist.??? 1
            ArcExportDesc MegaList, %a format
            ArcExportMethod zip lh




ΓòÉΓòÉΓòÉ 11.3. Compress Definition File ΓòÉΓòÉΓòÉ


          COMPRESS DEFINITION FILE


The file specified in the CompressCfg statement is a sequence of
Archive definition blocks, each one starting with "Archiver" and
ending with "End Archiver". You can find an example in the
Compress.Cfg file included in the distribution pack.

The order of the archive definition blocks within this file may
be important: when trying to unpack a compressed file, the list
of archivers is scanned in a reverse order.

In the case of two archivers that use the same identification
string (e.g. ARC and PAK), you must specify the archiver that
can unpack both (PAK) after the other one (ARC).

The compress.cfg file can be shared between DOS/NT and OS/2
applications: the "DOS" and "OS2" keywords are available to
distinguish between the commands to be used under DOS/NT and
OS/2.

O.S. specific archivers or commands must be prefixed with the
relevant keyword.

IMPORTANT NOTE: The lines that begin with "DOS" or "OS2" are
parsed by the DOS/NT and OS/2 versions respectively. If you need
the OS/2 version to execute a DOS command, you MUST NOT use the
DOS keyword: if you do, it will never parse that line; if you do
not, it will execute the DOS command "normally", provided you
have installed OS/2's Dos support.

See the examples below.


ΓòÉΓòÉΓòÉ 11.3.1. Archiver ΓòÉΓòÉΓòÉ


Archiver <ARCname>

    Starts the Archive definition block.

    <ARCname> is the name used to identify this archiver.

  Example:

    Archiver ZIP


ΓòÉΓòÉΓòÉ 11.3.2. Extension ΓòÉΓòÉΓòÉ


Extension  <ext>

    Specifies the default extension for the compressed
    files.

  Example:

    Extension ZIP


ΓòÉΓòÉΓòÉ 11.3.3. Ident ΓòÉΓòÉΓòÉ


Ident <ofs>,<ID>

    <ofs> is a decimal integer number representing the
    offset at which an archive identity marker <ID> must be
    present.

    Negative values can be used to indicate offsets from the
    END of a compressed file. -1 means "the last byte", -2
    "the second last byte" and so on.

    <ID> is a series of hexadecimal figures which represent
    the bytes of the marker string that must be present at
    the specified offset of the archive file.

  Example:

    Ident 0,504b0304  ; "PK^c^d"


ΓòÉΓòÉΓòÉ 11.3.4. Add ΓòÉΓòÉΓòÉ


Add <command>

    Specifies the command to add files to an archive.
    %a and %f are translated to the name of the archive and
    file to add.

  Example:

    Add zip -jk %a %f


ΓòÉΓòÉΓòÉ 11.3.5. Extract ΓòÉΓòÉΓòÉ


Extract <command>

    Specifies the command to extract files from an archive.
    %a and %f are translated to the name of the archive and
    file to extract.

  Example:

    Extract unzip -qqnjC %a %f


ΓòÉΓòÉΓòÉ 11.3.6. View ΓòÉΓòÉΓòÉ


View <command>

    This line is recognized and accepted for compatibility,
    but not used.


ΓòÉΓòÉΓòÉ 11.3.7. End Archiver ΓòÉΓòÉΓòÉ


End Archiver

    This statement is used to close a Archive definition.


ΓòÉΓòÉΓòÉ 11.3.8. Examples ΓòÉΓòÉΓòÉ

              Examples


  Complete example 1 (you need OS/2 only):

Archiver ZIP
   Extension   ZIP
   Ident     0,504b0304
   Add      zip -jk %a %f
   Extract    unzip -qqnjC %a %f
   View      unzip -v %a
End Archiver


  Complete example 2 (you need DOS only):

Archiver ZIP
   Extension   ZIP
   Ident     0,504b0304
   Add      pkzip -a %a %f
   Extract    pkunzip -n %a %f
   View      pkzip -v %a
End Archiver


  Complete example 3 (you need both OS/2 and DOS):

Archiver ZIP
   Extension   ZIP
   Ident     0,504b0304
OS2  Add      zip -jk %a %f
DOS  Add      pkzip -a %a %f
OS2  Extract    unzip -qqnjC %a %f
DOS  Extract    pkunzip -n %a %f
OS2  View      unzip -v %a
DOS  View      pkzip -v %a
End Archiver


  Complete example 4 (archiver to be used under DOS only):

DOS Archiver ZOO
DOS   Extension    ZOO
DOS   Ident      0,5a4f4f             ; "ZOO"
DOS   Add       zoo a: %a %f
DOS   Extract     zoo e:O %a %f
DOS   View       zoo v %a
DOS End Archiver


  Complete example 5 (it's a DOS executable, to be used under
            DOS or OS/2 indifferently):

Archiver ZOO
   Extension    ZOO
   Ident      0,5a4f4f             ; "ZOO"
   Add       zoo a: %a %f
   Extract     zoo e:O %a %f
   View       zoo v %a
End Archiver


ΓòÉΓòÉΓòÉ 12. TroubleShooting ΓòÉΓòÉΓòÉ


         T R O U B L E S H O O T I N G


ΓòÉΓòÉΓòÉ 12.1. Extraction problem ΓòÉΓòÉΓòÉ


            Extraction problem

Problem:
     FastLst does not extract the correct
     nodelist/nodediff.

Solution:
     Perhaps there is some nodelist/nodediff with corrupted
     file date. Check your "ArcPath", manually extract to
     the "InputPath" the required nodelist/nodediff and
     delete the archive (or reset its file-date so that it
     is similar to that of the enclosed file). FastLst will
     automatically rearchive the nodelist/nodediff if you
     use "ArcMethod"/"ArcDiffMethod", otherwise you can
     rearchive manually.


ΓòÉΓòÉΓòÉ 12.2. Out of Memory ΓòÉΓòÉΓòÉ


             Out of Memory

Problem:
     FastLst runs out of memory (Dos versions).

Solution:
     DOS 16: - try freeing as much conventional memory as
          possible.
         - reduce the "MsgSize" buffer, if you have
          used that statement in the configuration.
         - be aware that 530K of free conventional
          memory is the minimum requirement.
         - If you have a 386sx or better, you can use
          the 32 bit version that has less stringent
          conventional memory requirements, but you
          will need at least 800KB of extended memory.

     DOS 32: - give more DPMI memory to FastLst
         - enable the temporary file method: use the -t
          command line switch or the "FileMode"
          statement in the configuration file.


ΓòÉΓòÉΓòÉ 12.3. Problems with Empty Phone entries ΓòÉΓòÉΓòÉ


        Problems with Empty Phone entries

Problem:
     Some program behaves oddly while accessing entries
     that contain an empty phone number.

Solution:
     The problem might be caused by the cost that is
     assigned to empty-phone nodes (65535 by default).
     Try using the "CostNullPhone" global statement to give
     lower costs.

     Example:

     CostNullPhone 900 0


ΓòÉΓòÉΓòÉ 12.4. Empty SysOp List ΓòÉΓòÉΓòÉ


            Empty SysOp List

Problem:
     The SysOp List is empty, even if I have specified its
     name in the configuration.

Solution:
     You must use the SysOpLst statement to specify which
     nodelists must be considered for output to the SysOp
     list.


ΓòÉΓòÉΓòÉ 12.5. Slow processing ΓòÉΓòÉΓòÉ


            Slow processing

Problem:
     FastLst works very slowly (OS/2 version).

Solution:
     Perhaps you are compiling a large nodelist or set of
     nodelists on a system with few MegaBytes of free
     physical RAM, so that OS/2 needs to extensively use
     virtual memory. Try using the "temporary file" method:
     specify the -t command line switch or use the
     "FileMode" statement in the configuration file.


ΓòÉΓòÉΓòÉ 12.6. System performance degradation ΓòÉΓòÉΓòÉ


         System performance degradation

Problem:
     FastLst loads the system excessively, so that other
     OS/2 tasks don't perform properly (OS/2 version).

Solution:
     Use the "Priority Idle" statement in the configuration
     file, so that FastLst receives its time slices only
     when other processes with higher priority are idle.


ΓòÉΓòÉΓòÉ 12.7. I want maximum speed ΓòÉΓòÉΓòÉ


           I want maximum speed

Problem:
     I run FastLst while the communications are off, so I
     would like it to run as fast as possible even if it is
     in the background and other tasks are active (OS/2
     version).

Solution:
     Use the "Priority High 31" statement in the
     configuration file, so that FastLst receives the
     maximum priority for "non time-critical" processes.


ΓòÉΓòÉΓòÉ 12.8. Archived Diffs are not applied ΓòÉΓòÉΓòÉ


         Archived Diffs are not applied

Problem:
     FastLst does not apply the archived Diffs.

Solution:
     Remember that "InputPath <path>" is the default path
     for lists and diffs, while "ArcPath <path>" is the one
     for archives.

     Please compare your Compress.cfg with the example one,
     check the paths and try the commands manually.

     Check the day-extensions and time-stamps of the
     relevant files.


ΓòÉΓòÉΓòÉ 12.9. Dos/32 DOS4GW exception ΓòÉΓòÉΓòÉ


          Dos/32 DOS4GW exception

Problem:
     The Dos/32 version of FastLst aborts with an exception
     from the Dos extender.

Solution:
     Try using the 16 bit version.
     If this works, try again the 32 bit version, but
     starting with a "clean" config.sys and autoexec.bat
     (the Dos extender might be incompatible with some of
     your loaded drivers or TSRs.


ΓòÉΓòÉΓòÉ 12.10. Dial Scripts and VMODEM addresses ΓòÉΓòÉΓòÉ


        Dial Scripts and VMODEM addresses

Problem:
     How can I put script names or internet addresses in
     the place of a phone number ?

Solution:
     You may use the "Phone" statement
     in the "verbatim" form (phone string prefixed with
     '#').

     You may find handy to specify flag and cost overrides
     in the same statement.

     See the "Phone" statement.

     Note: you will usually need to specify a modem type
     for Vmodem calls.

     Example:

     Let's suppose the following Modem Type table is
     defined:

          TypeDef
            ISDNC  1
            V34    2
            VMP    3
          End


     You may use a Phone override of this kind:

          Phone 2:345/678 #domain.com VMP,CM 10 0


     And a ModemTrans (for Binkley's VMODEM line):

          ModemTrans   0
          ModemTrans   1
          ModemTrans   2
          ModemTrans   3 ATDT#  ; Vmodem



ΓòÉΓòÉΓòÉ 12.11. Region and zone-level Export ΓòÉΓòÉΓòÉ


         Region and zone-level Export

Problem:
     How can I export a Region segment together with the
     zone-level entries ?

Solution:
     The zone level entries have the Region/Net field equal
     to the zone number; you can use the Export statement
     in the following way:

     export MyR33.??? 1:1 2:2 2:33 3:3 4:4 5:5 6:6


ΓòÉΓòÉΓòÉ 12.12. Support ? ΓòÉΓòÉΓòÉ


              Support ?

Problem:
     I cannot find the solution to my problems.

Solution:
     - Try linking the APWORKS support echo
     - Try asking your local supporter
     - Try asking the author directly
     You can find the addresses in the ReadMe.1st file.


ΓòÉΓòÉΓòÉ 13. SHAREWARE ΓòÉΓòÉΓòÉ


            S H A R E W A R E


If you like this program and continue using it, you should pay
the author for his work, as per the ShareWare concept of
distribution.

Please see LICENSE.DOC and REGISTER.DOC for information.

Thank you for your interest in FastLst.


ΓòÉΓòÉΓòÉ 13.1. License.Doc ΓòÉΓòÉΓòÉ


           ΓòöΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòù
           Γòæ        Γòæ
           Γòæ F A S T L S T Γòæ
           Γòæ        Γòæ
           ΓòÜΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓò¥


            L I C E N S E

             P O L I C Y

             July 1996


This software (program and accompanying documentation) are:

Copyright (c) 1992-1996 Alberto Pasquale, all rights reserved.


           DISTRIBUTION FORMAT


This software is distributed in a locked RAR archive, with
embedded authenticity-verification information.

The distribution of modified archives, including those derived
from the conversion to a different archiver, is explicitly
prohibited.

When the RAR extension is not accepted, you should either store
the original RAR archive inside a different one (e.g. RAR inside
ZIP) or get the self-extracting executable that is prepared by
the author (available on ftp.wilmington.net/bmtmicro).



           S H A R E W A R E


This software is distributed as ShareWare: you are granted the
right to evaluate the program for a maximum of 30 days before
paying the author. After the evaluation period, you are required
to either register (see REGISTER.DOC) or stop using the program.

You are encouraged to distribute the original and unmodified
package freely, in any form and on any media, provided you do
not charge any fee for the program itself.

This package could be included in CD-ROM collections,
subscription download areas, BBS packages, provided it remains
in its complete and unmodified original archive.

In any case, the user must register with the author after the
evaluation period.

IMPORTANT: the registration is NOT a trade transaction, it is to
be considered as payment of royalties; therefor the registration
key is personal and NOT transferrable.


             DISCLAIMER


This software is provided on an "as is" basis without warranty
of any kind, expressed or implied, including but not limited to
the implied warranties of merchantability and fitness for a
particular purpose.

The person using the software bears all risk as to its quality
and performance.

The author will not be liable for any special, incidental,
consequential, indirect or similar damages due to loss of data
or any other reason.


ΓòÉΓòÉΓòÉ 13.2. Register.Doc ΓòÉΓòÉΓòÉ


  *******  **   ****  ******  ****   ****  ******
  **  *  ****  **  **  * ** *  **   **  **  * ** *
  ** *  **  **  **     **   **   **     **
  ****  **  **  ****   **   **    ****   **
  ** *  ******    **   **   **  *   **   **
  **   **  **  **  **   **   **  ** **  **   **
  ****   **  **  ****   ****  *******  ****   ****


    (C) Copyright 1992-1996  by  Alberto Pasquale

      A L L  R I G H T S  R E S E R V E D


For licensing terms and disclaimer, see LICENSE.DOC.

This program required a lot of work: by registering you will
support me in developing this and other similar products.

You will receive a registration Key that removes the initial 2
second pause and makes the program show "Registered <month/year>
To: <Reg.String>" instead of the registration request banner.

The registration is guaranteed valid for all future minor
updates and, in any case, for all versions that will be released
in a period of 2 years after registration. After this period, an
upgrade fee might possibly be required in the case of major new
releases.

The registration key works with the current version of the
program for ANY platform: you do not have to pay anything in
the case you change your operating system.

ΓòöΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòù
Γòæ                               Γòæ
Γòæ Registration fee: US$ 25, DEM 35, ITL 30,000 or (see below) Γòæ
Γòæ                               Γòæ
ΓòÜΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓò¥



ΓòÉΓòÉΓòÉ 13.2.1. How to Register ΓòÉΓòÉΓòÉ


            HOW TO REGISTER



Registering is quite easy; you can register:


- Directly with me by cash, check or international
 (not domestic !) postal money order.

- via local Registration Site in Germany, Denmark (Sweden,
 Norway), UK, Croatia.

- via BMT Micro (Wilmington, NC, USA), by credit card, money
 order, cashiers check, personal check, German or British
 currency.

- via PsL (Houston, TX, USA), by credit card.


The registration key will be delivered via internet e-mail or
crash netmail depending on availability; fax and postal mail
will be used only in case of problems.

Should you not receive your registration key in a reasonable
time, please feel free to contact me.

Please allow at least 3 weeks for response to international
airmail.


Please address your requests, complaints, suggestions to:

 Alberto Pasquale of 2:332/504@fidonet

 [e-mail]

 2:332/504@fidonet [phone] ISDNC V34+ V32T H16
 2:332/524@fidonet [phone] ISDNC V34  V32T H16 FAX


ΓòÉΓòÉΓòÉ 13.2.1.1. Author's ΓòÉΓòÉΓòÉ

      Hot to register directly with the author

You have to send the registration information and money to:

   Alberto Pasquale
   Viale Verdi 106
   41100 Modena
   Italy


ΓòÉΓòÉΓòÉ 13.2.1.1.1. Cash ΓòÉΓòÉΓòÉ


Cash:
   Just put the (accurately hidden) banknotes (US$ 25, DEM
   35, ITL 30,000) together with Register.For in an envelope.
   If you do not have US dollars, German marks or Italian
   liras and do not like going to the bank, you can send the
   equivalent in your currency, provided it is commonly
   exchangeable.


ΓòÉΓòÉΓòÉ 13.2.1.1.2. Check ΓòÉΓòÉΓòÉ


Check:
   Just put the check (accurately hidden) together with
   Register.For in an envelope. Please read carefully the
   following instructions:

   - Eurocheque: ITL 30,000 (thirty thousand).

   - Italian check: 30.000 lire

   - Other (bank) checks: US$ 25, DEM 35 or equivalent.

   ATTENTION: NO Postal Checks please.


ΓòÉΓòÉΓòÉ 13.2.1.1.3. Postal Money Order ΓòÉΓòÉΓòÉ


Postal Money Order:

   Just go to the post office and ask for an _INTERNATIONAL_
   postal money order. It is best to go to a major post
   office, since minor ones are generally not used dealing
   with international money orders. Usually you can choose
   whether to use your currency or the recipient's.

   Please be sure to specify the necessary registration
   information in the "sender message" field or send
   Register.For separately to the author.

   - International money order in italian liras: ITL 30,000
    (thirty thousand).

   - International money order in your currency: US$ 25,
    DEM 35 or equivalent.

   - Italian money order "vaglia": 30.000 lire.

   IMPORTANT: Please DO NOT send me normal "domestic" postal
   money orders, since they are not payable outside of your
   country; you must use INTERNATIONAL postal money orders.

   If you would like to receive the key soon, you
   can FAX me ([phone]) the receipt of the
   postal money order together with REGISTER.FOR.


ΓòÉΓòÉΓòÉ 13.2.1.2. Local Registration/Support sites ΓòÉΓòÉΓòÉ


Local Registration/Support Sites:

    If you choose this way, you will have contacts with the
    local supporter only: you will send him the money and
    registration form; in a few days you will receive your
    key.


ΓòÉΓòÉΓòÉ 13.2.1.2.1. Germany ΓòÉΓòÉΓòÉ


Germany:

    Roland Schiradin
    Stockbornstr. 10
    65343 Eltville
    Germany

    Fidonet:  2:2454/169 Mail Only
    Internet: [e-mail]

    Reg. Fee: DEM 35

    He has the APWORKS support echo and TIC file-areas for
    my programs available. Besides he can provide you with
    information about the nodes carrying APWORKS in
    Germany.

    He has the latest version of ApWorks programs available
    for F/R with the same magics listed in Readme.1st.


ΓòÉΓòÉΓòÉ 13.2.1.2.2. Denmark/Sweden/Norway ΓòÉΓòÉΓòÉ


Denmark
Sweden
Norway:
    Jens Holm
    Skanderupgade 9, D2
    8660 Skanderborg
    Denmark

    Reg. Fee: 125.- DKR

    Can be paid cash, check or postal order.

    Email:
    2:238/888.0@fidonet, 9:451/180@virnet, 81:445/40@os2net

    for swedish and norwegian users, if in doubt, please
    contact regsite for payment in local currency, reply will
    be crashed back.


ΓòÉΓòÉΓòÉ 13.2.1.2.3. United Kingdom ΓòÉΓòÉΓòÉ


United Kingdom:

    Vince Coen
    Applewood House
    Epping Road
    Roydon, Harlow
    Essex, CM19 5DA, UK

    Fidonet: 2:257/609

    Reg. Fee: GBP 15.00

    Payment can be in Cash, Cheque (bankers card number on
    order form please) or EuroCheck.

    Or direct to my bankers. Payment MUST be in Pounds Sterling.

    For payment though the bank:
    Bank:     First Direct.
    Sort code:   40-47-86.
    Account:    00449334
    Account name: Vincent Coen.

    Payment reference must include Sysop name and node number.

    He has the latest version of ApWorks programs available
    for F/R with the same magics listed in Readme.1st.


ΓòÉΓòÉΓòÉ 13.2.1.2.4. Croatia ΓòÉΓòÉΓòÉ


Croatia:

    Branko Radojevic
    KOPIJA d.o.o.
    Pera Rudenjaka 2a
    HR-20000 Dubrovnik

    Fidonet:  2:381/124
         2:381/20

    Internet: [e-mail]
         [e-mail]

    PULSAR BBS Dubrovnik
    Data : [phone] (ZYX, V34)
    Voice: [phone]

    Reg. Fee: Kn 135


ΓòÉΓòÉΓòÉ 13.2.1.3. BMT Micro ΓòÉΓòÉΓòÉ

         How to register with BMT Micro


You have to fill in the BmtMicro.For registration form and send
it (or equivalent information) to BMT Micro.

The registration fee is US$ 25.

ATTENTION: for any question regarding the program, its
registration, support etc, you must contact me directly.
Please contact BMT Micro to order ONLY.

Usually your key will be delivered within 2 business days.

In certain holiday periods (Christmas, Easter, end of July,
first half of August) there might be some delay (a few days for
Christmas or Easter, a couple of weeks in July/August). If you
think your order is particularly late, please contact me first !


    Mail Orders To: BMT Micro
            PO Box 15016
            Wilmington, NC  28408
            U.S.A.

     Voice Orders: 8:00am - 7:00pm EST (-5 GMT)
            [phone] (Orders only)
            [phone] (Orders / Order Inquires)

      Fax Orders: [phone] 24 hours, 7 days a week
            [phone] 24 hours, 7 days a week

Online Orders via BBS: [phone] 10 lines, all 14.4K
            [phone] 28.8k v.FC

    BBS via Telnet: bmt.wilmington.net

    via Compuserve: Thomas Bradford, 74031,307
     via Internet: [e-mail]


Credit cards: Visa, Mastercard, Discover, American Express,
       Diner's Club.

They also accept money orders, cashiers checks, personal checks,
German or British currency via registered mail.

Personal checks are subject to clearance.


ΓòÉΓòÉΓòÉ 13.2.1.4. PsL ΓòÉΓòÉΓòÉ

      How to register with PsL (by credit card)


You must fill in the PsL.Crd and Register.For forms; then
you must send BOTH of them to PSL directly (they will forward
Register.for information to me).

You can order with MasterCard, Visa, American Express or
Discover Card: the charge is US$ 25.

ATTENTION: you MUST NOT send me any information about your
credit card. If you do, I am NOT allowed to forward your credit
card info to PSL.

ATTENTION: for any question regarding the program, its
registration, key delivery etc, you must contact me directly.
You must contact PSL to order ONLY.

PSL will notify me your order within one business day and I will
usually send your key by e-mail or crash netmail within 24h, so
if you order by fax or phone, you should usually receive your
key within 2 business days.

ATTENTION: In certain "holiday" periods (Christmas, Easter, end
of July, first half of August) there might be some delay (a few
days for Christmas or Easter, a couple of weeks in July/August).
If you think your order is particularly late, please contact me
first !

ATTENTION: It may happen that the PSL operator asks you for your
preferred diskette format. You must be aware that this may be
"standard" PSL procedure, but I will send you a key ONLY (via
e-mail, crash netmail, fax or letter), since you already have
the program.

IMPORTANT: Please, be sure to always give PsL the address where
you want to receive your key: e-mail address, fidonet name _and_
address, fax number, and/or complete postal address. If you are
not in the fidonet nodelist and I don't receive enough
information, I will be forced to send you an air-mail letter
(2-3 weeks for delivery). In the case of doubts, you can send
the Register.For to me too, by e-mail, crash netmail or fax.

Credit card registrations may be made by the following methods
(please be sure to always include all the necessary information
from BOTH Register.For and PsL.Crd).

   -- Phone PsL at:

     800-2424-PsL i.e. 800-2424-775 (Toll free from USA)

     [phone] (international)

     PSL Office Hours:

     7:00 a.m. to  6:00 p.m. CST Monday->Thursday
     7:00 a.m. to 12:30 p.m. CST Friday

     Be sure to have BOTH Register.For AND PsL.Crd
     available to give order information to PSL.
     First of all, mention the PSL part number specified
     in PsL.Crd.

   -- FAX PsL at [phone]

   -- Email PsL at CompuServe userid 71355,470

   -- Write PsL at:
     The Public (software) Library
     P.O. Box 35705
     Houston, TX 77235-5705, USA

   Please, let me insist one more time:

   ΓòöΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòù
   Γòæ The above numbers are for ORDERS ONLY.         Γòæ
   Γòæ Any question about the status of the shipment of the  Γòæ
   Γòæ order (registration key), registration options,    Γòæ
   Γòæ product details, technical support, etc, must be    Γòæ
   Γòæ directed to the author, at the address given above in Γòæ
   Γòæ this documentation.                  Γòæ
   ΓòÜΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓò¥


ΓòÉΓòÉΓòÉ 13.2.2. How to fill in Register.For ΓòÉΓòÉΓòÉ


      INSTRUCTIONS FOR COMPILING REGISTER.FOR


To avoid errors in the key, please PRINT.

Thank you very much for your support !


ΓòÉΓòÉΓòÉ 13.2.2.1. Name ΓòÉΓòÉΓòÉ


Name:
   Your complete name.

   Example: John Doe


ΓòÉΓòÉΓòÉ 13.2.2.2. Reg ΓòÉΓòÉΓòÉ


Reg:
   The registration string you want displayed by the program.
   You can use any character in the IBM set (including special
   national characters above ASCII 127; if you do not use code
   page 437 (USA), please specify the code numbers) and you can
   use lowercase and uppercase at your preference.
   Maximum length: 63 characters.

   Usually it should be the same as your name, in which case
   you can omit this field.


ΓòÉΓòÉΓòÉ 13.2.2.3. e-mail to ΓòÉΓòÉΓòÉ


e-mail to:
   This is your internet e-mail address, if available.


ΓòÉΓòÉΓòÉ 13.2.2.4. Netmail to ΓòÉΓòÉΓòÉ


Netmail to:
   You have to specify the complete destination field for the
   netmail message.

   Examples:
        John Doe of 1:200/300.4
        John Doe of 1:200/300.0


ΓòÉΓòÉΓòÉ 13.2.2.5. Crash to ΓòÉΓòÉΓòÉ


Crash to:
   You have to specify the data necessary for crashing the
   message. Usually this should be your system or your Boss
   (if you are a point).

   I will call as 2:332/504@fidonet.

   - If your system (or your Boss) is 24h and it is in the
    fidonet nodelist, you can omit this field.

   - If your system is not 24h, please give me a 24h system to
    which I can crash your netmail for routing.

   - If the system in consideration is not in the fidonet
    nodelist, please add its complete phone number and modem
    type.

   Examples:
        1:200/400@fidonet
        9:800/700@ABCnet [phone] V34, ISDNC


ΓòÉΓòÉΓòÉ 13.2.2.6. Fax ΓòÉΓòÉΓòÉ


Fax:
   This is your (24h) fax number, if any.


ΓòÉΓòÉΓòÉ 13.2.2.7. Address ΓòÉΓòÉΓòÉ


Address:
   The postal address is the last opportunity of sending you
   the key.


ΓòÉΓòÉΓòÉ 13.2.2.8. Version ΓòÉΓòÉΓòÉ


Version:
   You should indicate BOTH the version number AND the
   Operating System.

   Example: ver. 1.36  OS/2

   This is not essential and is included for statistical
   purposes only (the key works with all current versions).


ΓòÉΓòÉΓòÉ 13.2.2.9. Notes ΓòÉΓòÉΓòÉ


Notes:
   You can send me your wish list for future versions,
   or anything you like.


ΓòÉΓòÉΓòÉ 13.2.3. How to fill in BmtMicro.For ΓòÉΓòÉΓòÉ


      INSTRUCTIONS FOR COMPILING BMTMICRO.FOR


The first section contains data necessary for BMT Micro (your
name, company, address, phone and fax).

The second section contains the "Registration Information" that
will be relayed to me so that I can build the key and deliver it
to you.

The third section contains the product and cost indication.
The registration is valid for any operating system.

The forth section contains data for Credit Card payment.

To avoid errors, please PRINT.

Thank you very much for your support !


ΓòÉΓòÉΓòÉ 13.2.3.1. Reg ΓòÉΓòÉΓòÉ


Reg:
   The registration string you want displayed by the program,
   ASCII characters only (<127).
   Maximum length: 63 characters.


ΓòÉΓòÉΓòÉ 13.2.3.2. e-mail to ΓòÉΓòÉΓòÉ


e-mail to:
   This is your internet e-mail address, if available.


ΓòÉΓòÉΓòÉ 13.2.3.3. Netmail to ΓòÉΓòÉΓòÉ


Netmail to:
   You have to specify the complete destination field for the
   netmail message.

   Examples:
        John Doe of 1:200/300.4
        John Doe of 1:200/300.0


ΓòÉΓòÉΓòÉ 13.2.3.4. Crash to ΓòÉΓòÉΓòÉ


Crash to:
   You have to specify the data necessary for crashing the
   message. Usually this should be your system or your Boss
   (if you are a point).

   I will call as 2:332/504@fidonet.

   - If your system (or your Boss) is 24h and it is in the
    fidonet nodelist, you can omit this field.

   - If your system is not 24h, please give me a 24h system to
    which I can crash your netmail for routing.

   - If the system in consideration is not in the fidonet
    nodelist, please add its complete phone number and modem
    type.

   Examples:
        1:200/400@fidonet
        9:800/700@ABCnet [phone] V34, ISDNC


ΓòÉΓòÉΓòÉ 13.3. Register.For ΓòÉΓòÉΓòÉ




FastLst Registration Form

(Please PRINT)

See Register.Doc for instructions:        Date: __/__/__

Name: _________________________________________________________

Reg.: _________________________________________________________

e-mail to: ____________________________________________________

Netmail to: ___________________________________________________

Crash to: _____________________________________________________

Fax: __________________________________________________________

Address: ______________________________________________________

     ______________________________________________________

     ______________________________________________________

Version: _.___  OS/2 ( )  NT ( )  DOS32 ( )  DOS16 ( )

Notes: ________________________________________________________

_______________________________________________________________

_______________________________________________________________




ΓòÉΓòÉΓòÉ 13.4. BmtMicro.For ΓòÉΓòÉΓòÉ


BMT Micro
FastLst Registration Form

      *****************************************
      * DO NOT SEND this form to the author ! *
      *****************************************

See Register.Doc for instructions, please PRINT:  Date: __/__/__

Name: __________________________________________________________

Company: _______________________________________________________

Address: _______________________________________________________

________________________________________________________________

City: ______________________  State/Province: _________________

Country: ___________________________ Postal Code: ______________

Phone: _________________________________________________________

Fax: ___________________________________________________________


         REGISTRATION INFORMATION

Reg.: __________________________________________________________

e-mail to: _____________________________________________________

Netmail to: ____________________________________________________

Crash to: ______________________________________________________


Product: FastLst (by Alberto Pasquale)     Price:  US$ 25.00

North Carolina residents, please add 6% sales tax:   +US$ __.__

                        Total:  US$ __.__

For credit card payment only:

Circle one: VISA / Master / Discover / AMEX / Diner's Club

Credit card number   : _______________________________________

Expiration date     : ___/___

Authorization signature: _______________________________________


ΓòÉΓòÉΓòÉ 13.5. PsL.Crd ΓòÉΓòÉΓòÉ




FastLst Credit Card Registration Form
PSL Part number 11471

      *****************************************
      * DO NOT SEND this form to the author ! *
      *****************************************

   Please read carefully Register.Doc for instructions.


                 Date _________________________


Cardholder's name, exactly as it appears on the credit card:

      _____________________________________________________

[Company:] _____________________________________________________


Billing address for the card:

   ___________________________________________________________

   ___________________________________________________________

   ___________________________________________________________

Payment by:  ( ) MasterCard      ( ) Visa
       ( ) American Express   ( ) Discover Card

Card #:  _______________________________  Exp. Date:  __________

Signature of cardholder: _______________________________________



ΓòÉΓòÉΓòÉ 14. Sample config files ΓòÉΓòÉΓòÉ

        Some example configuration files


ΓòÉΓòÉΓòÉ 14.1. Minimal Configuration ΓòÉΓòÉΓòÉ


;     FastLst 1.36, (c) Copyright 1992-1996 Alberto Pasquale

;             FastLst.Cfg Example

;             Minimal configuration


; RegKey YourRegistrationKey

CompressCfg d:\flst\compress.cfg
InputPath d:\flst\nodelist
ArcPath d:\flst\arc
V7BugFix

Dial     ; for Europe
 39-59-  /   5 0     ; country and district code
 39-    0   60 0
 -     00  300 0
End

; For North America (see the doc for more details !):
; Dial
;  LocalValues 1-414- / 0  ; country and area code
;  LocalExchanges 231 232 233 235 236 424
;  1-414-  1-  25
;  1-    1-  50
;  -    011 250
; End


Version7 v7 NODEX SYSOP
 FidoUserLst
 SysOpLst
 ArcMethod zip
 ArcDiffMethod zip
 PasswordFile d:\flst\fastlst.pwd

 NodeList nodelist.???
  NodeDiff NODEDIFF.???
  ArcList nodelist.??? 1
  ArcDiff nodediff.??? 2
  ArcListDesc Fido Nodelist for day %d (%D), %a format
  ArcDiffDesc Fido Nodediff for day %d (%D), %a format

 NodeList REGION.033 2       ; Region 33 in zone 2
  ArcList region33.???
  ArcListDesc Region 33 (Italy) fido nodelist, %a format

 NodeList Apw_Pnts.Lst  ; Points in "Boss," format


ΓòÉΓòÉΓòÉ 14.2. Full configuration ΓòÉΓòÉΓòÉ


;     FastLst 1.36, (c) Copyright 1992-1996 Alberto Pasquale

;            FastLst.Cfg  Example

;             Full configuration

;        See the documentation for more details !


; RegKey YourRegistrationKey

Priority Idle

; FileMode

StatusLog d:\flst\fastlst.log
CompressCfg d:\flst\compress.cfg
InputPath d:\flst\nodelist    ; plain nodelists
ArcPath d:\flst\arc       ; archived nodelists/nodediffs
ArcDate Creation
; MultiLineDesc 31
KillAfter
KillSource
V7BugFix
NoRedir

CostNullPhone 1000 0       ; costs for nodes with empty phone
CostVerbatimPhone 10 0      ; costs for Verbatim phones

Dial     ; for Europe
 LocalValues 39-59- / 0 0  ; country and district codes
 LocalExchanges 21 22    ; urban exchanges
 LocalExchanges 23 24
 39-59-  /     5 0   ; remaining district #s
 39-    0    60 0   ; remaining domestic #s
 43-    0043-  100 0   ; some international #s
 32-    0032-  100 0
 45-    0045-  100 0
 33-    0033-  100 0
 49-    0049-  100 0
 44-    0044-  100 0
 34-    0034-  100 0
 46-    0046-  100 0
 41-    0041-  100 0
  1-    001-  200 0
 -     00   300 0   ; remaining international #s
End


;Dial    ; for America, see the Docs for further details
;  LocalValues 1-510- / 0
;  LocalExchanges 224 225 226 227 247 249 252 264 276
;  LocalExchanges 278 293 317 353 354 416 417
;
;  LocalValues 1-408- 1-408- 0
;  LocalExchanges 232 251 254 258 259 262 263 272 276
;  LocalExchanges 321 324 325 383 428 432 433 434
;
;  LocalValues 1-415- 1-415- 0
;  LocalExchanges 233 234 321 322 323 324 325 326 327
;  LocalExchanges 328 329 354 424 462 473 493
;
;  1-510- /    25
;  1-408- 1-408- 25
;  1-415- 1-415- 25
;  1-   1-   100
;  -    011   2000
;End


TypeDef
 V34  1
 VFC  2
 UVFC  2
 V32T  3
 UV32T 3
 H16  4
 V32B  5
 ZYX  5
 Z19  5
 Z16  5
 H14  6
 V32  7
 HST  8
 VMP  9
End

; FlagDef
;  V42B AB   ; A & B user-flags set on nodes with V42B flag
;  ENC  D    ; D user-flag set on nodes with ENC flag
; End

MsgLogArea  d:\bbs\mail\net -$
MsgRemArea  d:\bbs\mail\net -$
MsgSize 60000      ; do not use with Dos 16 bit version !
MsgFromNode 2:332/504
MsgToNode  2:332/504
MsgTo    Alberto Pasquale
MsgAttr   P

;FidoTxt
;FidoPrn

Version7 v7 NODEX SYSOP
 FidoUserLst
 SysOpLst
 ArcMethod zip Lh
 ArcDiffMethod zip LH
 ArcExportMethod zip lh
 PasswordFile d:\flst\fastlst.pwd

 Phone 2:332/504 39-59-246112
 Cost  2:332/504 500 0
 Phone 2:332/501 #alberto.com VMP,CM 0

 NodeList zonelist.???
  NodeDiff alldiff.???
  ArcList zonelist.??? 2
  ArcDiff alldiff.??? 5
  ArcListDesc Non-Fido Nodelist for day %d (%D), %a format
  ArcDiffDesc Non-Fido Nodediff for day %d (%D), %a format

 NodeList region24.??? 2      ; Region 24 in zone 2
  ArcList origr24.??? 1      ; Keep 1 origr24.l??
  ArcListDesc Original Region 24 Nodelist for day %d (%D), %a format

 NodeList points24.???
  GermanPointList
  NodeDiff pr24diff.???
  ArcList points24.??? 3
  ArcDiff pr24diff.??? 5
  ArcListDesc R24 PointList for day %d (%D), %a format
  ArcDiffDesc R24 PointDiff for day %d (%D), %a format

 NodeList cnodelst.??? 2      ; Cnodelst  in zone 2
  NodeDiff cnodedif.???
  ArcList  cnodelst.??? 1
  ArcDiff  cnodedif.??? 5
  ArcListDesc Classic German Nodelist for day %d (%D), %a format
  ArcDiffDesc Classic German Nodediff for day %d (%D), %a format

 NodeList ptlist.???        ; PointList in "Boss," format
  ArcList ptlist.??? 1      ; Keep 1 ptlist.l??
  ArcListDesc Italian Point List for day %d (%D), %a format

 NodeList nodelist.???
  MsgRem SUE  ; log comments beginning with S, U or E
  NodeDiff NODEDIFF.???
  ArcList nodelist.??? 1
  ArcDiff nodediff.??? 2
  ArcListDesc Fido Nodelist for day %d (%D), %a format
  ArcDiffDesc Fido Nodediff for day %d (%D), %a format

  Export region25.??? 2:25
   ArcExport region25.??? 1
   ArcExportDesc Region 25 %D, %a format

 NodeList REGION.033 2       ; Region 33 in zone 2
  MsgRem SUE
  ArcList region33.???
  ArcListDesc Region 33 (Italy) fido nodelist, %a format

 NodeList hub.500 2:332   ; Hub 500 nodelist in net 332, zone 2

 NodeList MyNodes.Lst       ; private list

 NodeList Apw_Pnts.Lst  ; Points in "Boss," format



Version7 v7 NODEX2 SYSOP2  ; let's make a second, shorter, nodelist
 SysOpLst
 PasswordFile d:\flst\fastlst.pwd

 NodeList nodelist.???
 NodeList REGION.033 2       ; Region 33 in zone 2


ΓòÉΓòÉΓòÉ 14.3. Compress Definition ΓòÉΓòÉΓòÉ


;        Example Compress.Cfg definition file
;
; If you are already using a Compress.Cfg file with other programs,
; you do not need this one.
; Just make sure you use the correct switches to avoid case mismatch
; with case sensitive archivers, as ZIP/UNZIP.
;
; The DOS prefix is for the NT version too.


Archiver ARC
   Extension   ARC
   Ident     0,1a
OS2  Add      arc aw5 %a %f
DOS  Add      pkpak -oct a %a %f
OS2  Extract    arc ew %a %f
DOS  Extract    pkunpak /r %a %f
OS2  View      arc vw %a
DOS  View      pkpak v %a
End Archiver


DOS Archiver PAK
DOS   Extension    PAK
DOS   Ident      -2,fe
DOS   Add       pak a %a %f
DOS   Extract     pak e /wn %a %f
DOS   View       pak v %a
DOS End Archiver


Archiver ZIP
   Extension   ZIP
   Ident     0,504b0304
OS2  Add      zip -jk %a %f     ; store in uppercase
DOS  Add      pkzip -a %a %f
OS2  Extract    unzip -qqnjC %a %f  ; case insensitive extract
DOS  Extract    pkunzip -n %a %f
OS2  View      unzip -v %a
DOS  View      pkzip -v %a
End Archiver


Archiver LH
   Extension   LZH
   Ident     2,2d6c68             ; "-lh"
OS2  Add      lh a %a %f
DOS  Add      lha a /m %a %f
OS2  Extract    lh x %a %f /o
DOS  Extract    lha e /m %a %f
OS2  View      lh l %a /v /o
DOS  View      lha l %a
End Archiver


Archiver ARJ
   Extension   ARJ
   Ident     0,60ea
DOS  Add      arj a -e+ %a %f
OS2  Extract    unarj e %a %f
DOS  Extract    arj e -n %a %f
OS2  View      unarj l %a
DOS  View      arj l %a
End Archiver


Archiver RAR
   Extension   RAR
   Ident     0,526172211a0700
   Add      rar a -ep -y %a %f
   Extract    rar e -o- -y %a %f
   View      rar v -y %a
End Archiver