dynamic_text=id1_1,"Please insert DISK01 into '%MakeDiskDrive%'."
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=Modify
static_text=
dynamic_text=AutoText,""
static_text=
static_text="@ can:"
radio_button=ModNow,1,"&Make all the modifications for you"
radio_button=ModLater,0,"&Let you make the modifications later"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=DLLInstall
static_text="@ attempted to install the file:"
dynamic_text=FileDesc," "
static_text="in this directory:"
dynamic_text=DLLDir," "
static_text="but, it currently exists in"
dynamic_text=OtherDLLDir," "
static_text=
radio_button=DLL_Delete_Old,,"Install the new file and &delete the existing file"
radio_button=DLL_Keep_Both,,"Install the new file and &keep the existing file"
radio_button=DLL_Replace_Old,,"&Replace the existing file with the new file"
radio_button=DLL_Dont_Install,,"Do ¬ install the new file"
static_text=
check_box=DLL_Skip_Dialog,0,"&Use the current choice for all subsequent DLLs"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=ReadOnlyFile
static_text="@ attempted to install the file:"
dynamic_text=FileDesc," "
static_text="but found it marked read-only"
static_text=
radio_button=RO_Replace_Old,,"&Install the file anyway"
radio_button=RO_Dont_Install,,"&Do not install this file"
static_text=
check_box=RO_Skip_Dialog,0,"&Use the current choice for all read-only files"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=DeleteReadOnlyFile
static_text="@ attempted to remove the file:"
dynamic_text=FileDesc," "
static_text="but found it marked read-only"
static_text=
radio_button=RO_Remove_Old,,"&Remove the file anyway"
radio_button=RO_Dont_Remove,,"&Do not remove this file"
static_text=
check_box=RO_Skip_Remove,0,"&Use the current choice for all read-only files"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=CantOpen
static_text=
dynamic_text=OpenError," "
static_text=
static_text="Choose OK to continue the installation"
static_text="Choose Cancel to stop the installation"
push_button=.+"&OK"
push_button=^"&Cancel"
[Dialog]
name=NewerFile
static_text="@ attempted to install the file:"
dynamic_text=FileDesc," "
static_text="but found a newer version already existed"
static_text=
radio_button=Newer_Replace_Old,,"&Install the file anyway"
radio_button=Newer_Dont_Install,,"&Do not install this file"
static_text=
check_box=Newer_Skip_Dialog,0,"&Use the current choice for all newer files"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=License
static_text="Please fill in the following License information:"
static_text=
edit_control=LicenseName,," Name:"
static_text=
edit_control=LicenseCompanyName,,"Company:"
static_text=
dynamic_text=LicenseMessage,""
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=LocCfg
static_text="@ Can not find the following file:"
dynamic_text=FileToFind,""
static_text=
static_text="Please specify new drive"
edit_control=CfgDir,,"Drive Letter:"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[ErrorMessage]
IDS_ERROR="%s"
IDS_NODISKFOROPTION="This diskette set does not contain the requried option."
IDS_BADCRC="Internal error unpacking: '%s' - bad CRC."
IDS_NOMEMORY="Insufficient memory to run @.\n Close an application and try again."
IDS_NOSETUPINFOFILE="The %s file cannot be found.\nPlease verify the distribution diskette."
IDS_NODISKSPACE="Drive %c: contains %ldK of free disk space.\n@ requires a minimum of %ldK.\n\nThe installation may fail. Do you want to proceed anyway?"
IDS_NOROOMFORTMP="@ requires cannot find a disk with %ldK free for a temporary file."
IDS_CANTMAKEDIR="The %s directory cannot be created.\nEnter another directory or try another drive."
IDS_QUERYABORT="@ has not completed installing the software.\nAre you sure you want to stop installation?"
IDS_SETUPNOGOOD="The software has not been successfully installed!\nYou must run @ again before using the software."
IDS_UNSETUPNOGOOD="The software has not been successfully uninstalled!\nYou must run @ again to completely remove the software."
IDS_PMADDNOGOOD="@ could not add the application(s) to the Program Manager."
IDS_PMREMNOGOOD="@ could not remove application(s) from the Program Manager."
IDS_UNSETUPCOMPLETE="@ has completed successfully."
IDS_COMPLETE="@ has completed successfully."
IDS_NOMEMORYCOPY="Insufficient memory to copy file.\nTry again or cancel @."
IDS_CANTOPENDST="Cannot create destination file.\nTry again or cancel @."
IDS_NEWERVERSION="A newer version of %s already exists.\nDo you want it replaced?"
IDS_CANTFINDAUTOEXEC="@ cannot find the original AUTOEXEC.BAT file"
IDS_CANTFINDCONFIGSYS="@ cannot find the original CONFIG.SYS file"
IDS_COPYAUTOEXEC="@ will place the contents of your original\nAUTOEXEC.BAT and CONFIG.SYS files\n in the following backup files:\n\n %s\n %s"
IDS_COPYCONFIGSYS="@ will place the contents of your original CONFIG.SYS file in the following backup file: \n\n %s\n"
IDS_NEWAUTOEXEC="@ will save the changes it would make to\nyour AUTOEXEC.BAT and CONFIG.SYS files\nin the following backup files:\n\n %s\n %s"
IDS_NEWCONFIGSYS="@ will save the changes it would make to your CONFIG.SYS file in the following backup file:\n\n %s\n"
IDS_ERRORBACKAUTO="An error occurred trying to create the backup\ncopy of your AUTOEXEC.BAT file"
IDS_ERRORBACKCONFIG="An error occurred trying to create the backup\ncopy of your CONFIG.SYS file"
IDS_CHANGES="@ will save the changes it would make to\nyour Environment in the following file:\n\n %s"
IDS_REPLACERDONLY="The file %s is marked as read-only.\nDo you want it replaced?"
IDS_OS2CONFIGSYS="The changes to the CONFIG.SYS file are required to run the software. Please shutdown your system and restart to allow the changes to take effect.\n"
IDS_NT_REBOOT="@ has completed installing the software.\n\nYou should reboot your computer so\nthat the changes to your system setup\nwill take effect."
IDS_OS2_REBOOT="@ has completed installing the software.\n\nYou should reboot your computer so\nthat the changes to your CONFIG.SYS\nwill take effect."
IDS_WINDOWS_REBOOT="@ has completed installing the software.\n\nYou should reboot your computer so\nthat the changes to your AUTOEXEC.BAT,\nCONFIG.SYS and Windows .INI files will take effect."
IDS_DOS_REBOOT="@ has completed installing the software.\n\nYou should reboot your computer so\nthat the changes to your AUTOEXEC.BAT\nand CONFIG.SYS will take effect."
IDS_ERROR_WRITING="An I/O error occurred while writing to the file '%s'"
IDS_ERROR_OPENING="An I/O error occurred while opening the file '%s'"
IDS_ERROR_CLOSING="An I/O error occurred while closing the file '%s'"
IDS_FIRST="%s"
IDS_UNKNOWNERROR="Unknown error"
IDS_RENAMEERROR="Cannot rename to %s. Continue with PATCH process?"
IDS_PATCHFILEERROR="Cannot apply patch file %s. Continue with PATCH process?"
IDS_COPYFILEERROR ="Cannot copy file %s. Continue with PATCH process?"
IDS_DELETEFILEERROR ="Cannot delete file %s. Continue with PATCH Process?"
IDS_NOTPATCHFILE="%s is not a patch file."
IDS_CANTFINDOUTPUT="Cannot find output file (to be patched) %s."
IDS_NOATTRIBUTES="Cannot find file attributes of %s."
IDS_CANTWRITE="Cannot write to file %s."
IDS_BADLENGTH="File length Error"
IDS_WRONGCHECKSUM="Invalid Checksum Error"
IDS_CANTFINDPATCH="Cannot find patch file %s."
IDS_CANTDELETEFILE="Cannot delete file %s."
IDS_CANTOPENSRC="Cannot open source file %s."
IDS_CANTRENAME="Cannot rename %s to %s."
IDS_PATCHABORT="Patch Process Aborted."
IDS_ENV_CHANGES="Required changes to environment:"
IDS_ADD_TO_VAR="add the following to the '%s' variable"
IDS_SET_VAR_TO="set variable '%s' to"
IDS_DISKETTES_NEEDED="You will need %d diskettes"
IDS_DRIVE_SPEC="Drive %c: "
IDS_DRIVE_FREED=" will be freed."
IDS_DRIVE_REQUIRED=" required, "
IDS_DRIVE_AVAILABLE=" available."
IDS_MODIFY_AUTOEXEC="@ needs to modify AUTOEXEC.BAT and CONFIG.SYS."
IDS_MODIFY_CONFIG="@ needs to modify CONFIG.SYS."
IDS_MODIFY_REGISTRY="@ needs to change the Registry."
IDS_INCONSISTENT="@ has determined that you are installing over a previous version of the software, or have manually added or removed files. Do you wish to install all missing files?"
IDS_NO_FILES_PATCHED="No files were patched"
IDS_REMOVE_ODBC="@ has determined that after this uninstall, the ODBC core components will no longer be used. Should these files be deleted?"
IDS_REMOVE_DLL="@ has determined that after this uninstall, the file %s will no longer be used. Should this file be deleted?"
IDS_ERASE_OK="All files on drive '%c' will be erased.\nProceed anyway?"
IDS_FORMAT_OK="This disk in drive '%c' will be formatted, destroying ALL files.\nProceed anyway?"
IDS_ERASE_ARE_YOU_SURE="Are you sure you want to erase all files on drive '%c'?"
IDS_FORMAT_ARE_YOU_SURE="Are you sure you want format drive '%c' destroying all existing files?"
IDS_INVALID_DISKETTE_SPEC="'%s' is not a valid diskette drive name.\n"
[SetupErrorMessage]
IDS_WRITEERROR="Error writing to destination file"
