home *** CD-ROM | disk | FTP | other *** search
- -------------------------------------------------------------------------------
- | Problem or bug report |
- -------------------------------------------------------------------------------
-
- If you find a problem with Terminate or something you believe to be wrong,
- please give us as much information as possible. The more information we
- get, the better the chance of a solution. You may use as many lines as you
- need. Please remove any information in the document that is not necessary
- to solve your problem with Terminate, such as these lines here at the top.
-
- Your information:
-
- Name (& Firm) : ____________________________________________________________
- Address 1 : ____________________________________________________________
- Address 2 : ____________________________________________________________
- Country : ____________________________________________________________
- Voice phone : _________________ Hours: 00:00-24:00 GMT
- Fax phone : _________________ Hours: 00:00-24:00 GMT
- Modem phone : _________________ Hours: 00:00-24:00 GMT Fido: ____________
-
- If you are using a PROFESSIONAL version, where did you purchase your keyfile:
- Dealer : ____________________________________________________________
-
- Terminate Version : ____
- Multitasker (& version) : _________________ (None/Win/Dos/OS2/other)
- Processor : Intel ___ (8086,286,386,486,Pentium) Speed: ___ MHz
- Other ________________________
- Total RAM memory : ___ MB
- File System : FAT _ (DOS) HPFS _ (OS/2)
- Hard disk type : IDE _ SCSI _ MFM _ RLL _ Unknown _
- Video card manufacturer : Model: __________________________ RAM: ____ KB
- Modem type : Manufacturer: ____________________________________
- Model : ____________________________________
- Modem Init : ____________________________________
-
- CONFIG.SYS
- ----------------------------------------------------------------------------
- Insert your CONFIG.SYS here.
- ----------------------------------------------------------------------------
-
- AUTOEXEC.BAT
- ----------------------------------------------------------------------------
- Insert your AUTOEXEC.BAT here.
- ----------------------------------------------------------------------------
-
- Modem configuration dump: Enable capture and send the config command which
- you will find in your manual. AT&V for most modems. ATI4 for USRobotics.
- ----------------------------------------------------------------------------
- Insert the captured configuration here.
- ----------------------------------------------------------------------------
-
- YOUR Problem. Be SPECIFIC and GIVE EXAMPLES OF HOW TO REPRODUCE THE PROBLEM:
- (Use as many lines as you need):
-
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
- ___________________________________________________________________________
-
-
- PLEASE TRY TO CHECK THE PROBLEM REPEATEDLY AND SEE IF SOMETHING IN YOUR
- SETUP WAS WRONG. TRY CREATING A NEW CONFIGURATION AND SEE IF THE PROBLEM
- GOES AWAY, THEN TRY TO EXPORT BOTH CONFIGURATIONS WITH T-CFGxx.EXE AND
- COMPARE THE DIFFERENCES. THIS NORMALLY SOLVES MANY PROBLEMS.
-
- You can also export your Terminate configuration with the T-CFGxx.EXE
- program available from the registration or support site closest to you or
- just send us your TERMINAT.CFG. Pack the files together in a file with an
- archiving program and call the file P-your-name-in-6-chars.ARJ (or ZIP).
- Ex.: P-JOHN.ARJ or P-CHRISTO.ZIP. This file should be sent on a disk as a
- private upload to DAN BBS. You can also send it with the Terminate Point
- System to DAN BBS 2:236/111. Please do NOT expect a personalised answer
- since we already get so many letters that it is impossible to answer them
- all - but all bugs are, of course, corrected as fast as possible.
-
- DAN BBS
- Kastanie alle 14
- 2620 Albertslund
- Denmark
-
-