DCOM_INSTALL_NOGO=Unable to start the DCOM installation program. Please go to the \nMicrosoft web site and install the DCOM. Then start Setup again.\n\nSetup will exit now.
DO_REG=Setting registry entries.
INST_COMP=Installation is now complete. If you would like to read the Readme file or start Diskeeper, check the appropriate box(es) below, then click Finish.
SD_STR_20141=This version of Diskeeper is for Windows NT " + szNtProductType + " only.
SD_STR_20130=Creating Icons....
NOT_IE1=\non your computer. \nVersion
FAILED_SERVICE_INSTALL=Failed to Install NT SERVICE
LOW_DISK_SPACE=There is not enough space available on the disk. \nPlease free up some space or change the target \nlocation to a different disk
MMC_REBOOT=MMC installation requires a reboot in order to complete \nthe installation. This part of the Diskeeper installation will \nnow exit. After reboot, setup will continue. The MMC \ninstallation will now start.
TITLE_MAIN=Diskeeper for Windows NT 4.0 \nServer version 5.0 Trialware
SD_STR_20142=You will need the " + szNtProductType + " CD to update your system.
SD_STR_20131=Register
SD_STR_20120=Copying program files...
NOT_IE2=is required for Diskeeper operation. \nWould you like to install Internet Explorer 5 \nat this time? If you chose not to install this \nnewer version of Internet Explorer, \nsetup will exit.
UNINST_NT_KEY=Diskeeper
CANT_GET_DRIVES=Unable to get a list of valid drives.
DK_SIZE=1000
NOT_OSR2=This version of Diskeeper only supports OSR2 or higher \nversions of Windows 95. \n\nSetup will now exit.
ERROR_COPY=ERROR While copying file. Error #
PRODUCT_KEY_NT_SRV=Diskeeper.msc
SD_STR_20143=This upgrade version of Diskeeper requires that the Diskeeper 1.0X files exist on a CD-ROM. Please enter a CD-ROM drive or press cancel to end setup.
SD_STR_20121=Unable to create a directory under
SD_STR_20110=is not supported on Build Number
NO_MMC2=on your computer. Version
MMC_INSTALL_NOGO=Unable to start the MMC installation program. Please go to the \nMicrosoft web site and install the MMC. Then start Setup again.\n\nSetup will exit now.
DK_UNINSTD=Diskeeper uninstall complete.
COMPANY_NAME=Executive Software
ERROR_COMPONENT=Component:
PRODUCT_VERSION_NT=5.00.328td
SD_STR_20144=Installation returned error
SD_STR_20122=Please check write access to this directory.
SD_STR_20111=This Field Test Release is only supported on Windows NT 4.00
INSTALL_IE=Install Internet Explorer
NO_MMC3=is required for Diskeeper operation. Would you like to install this version of\nMMC? If you choose not to install this newer version of MMC, setup will exit.
FINISH_REBOOT=Setup has finished copying files to your computer. \n\nBefore you can use the program, you must restart your computer.
PROG_FOLDER_SRVNT=DiskeeperServer
DCOM_REBOOT=DCOM installation requires a reboot in order to complete \nthe installation. This part of the Diskeeper installation will \nnow exit. After reboot, setup will continue. DCOM \ninstallation will now start.
CHECKING=Setup is checking for installed components. Please wait...
NO_README=Unable to open the Readme file. Please check \nthe destination directory and see if it is there.
COMPANY_NAME16=Executive Software
DCOM_SPACE=3000
SD_STR_20134=OpenSCManagerA ERROR
SD_STR_20123=General file transfer error. Please check your target location and try again.
SD_STR_20112=will not install on this computer unless Service Pack 2 or greater is installed.
SD_STR_20101=Insert Diskeeper Disk
FOUND_9X=Setup has found Diskeeper installed. \nDiskeeper must be uninstalled before \ninstalling this version. Setup will now \nstart the Diskeeper Uninstall and then \ncontinue. If you choose not to uninstall\nSetup will exit.
FOLDER_NAME_NT_WK=Diskeeper99 Workstation
DCOM_BUILD95=4,71,0,2612
NOT_IE5=Setup has found that you are running Internet Explorer 4\nor a beta version of Internet Explorer 5. While Diskeeper \nwill run with Internet Explorer 4 and beta versions of Internet\nExplorer 5, we recommend using the released version of Internet \nExplorer 5. \n\nWould you like to install Internet Explorer 5 at this time?
NEED_SP3=Setup has determined that your machine is not running \nService Pack 3 or better at this time. You will need to \ninstall Service Pack 3 or better on you machine before \ninstalling Diskeeper. \n\nSetup will exit at this time.
REBOOT_MSG_1=Setup is almost complete. Select from the options below.
NINEX_SYSDRIVE_SPACE=1000
DCOM_DESTIN_SPACE=3000
PRODUCT_VERSION=5.00.328
ERROR_MOVEDATA=An error occurred during the move data process: %d
ERROR_FILEGROUP=File Group:
SD_STR_20124=Setup Complete
SD_STR_20245=This version of Diskeeper is for Windows NT Server only. Setup will now exit.
SD_STR_20102=Please enter the drive that contains the Diskeeper disk.
X86NT_ONLY=This version of Diskeeper is supported on X86 machines only. Setup will now exit.
IE4=4101111
NO_MMC5=Setup has detected that you do not have Microsoft Management Console \ninstalled. This software is required in order to run this version of Diskeeper. \nSetup can install this for you now. If you do not want to install it, setup \nwill exit. \n\n Do you want to install it now?
PRODUCT_NAME_REG=DiskeeperNT4
REQSOFT_COMP=Setup has completed installing required software. \nDiskeeper installation will continue.
IMPORT=Important Notice
REBOOT_MSG_2=Restart now - No Boot-Time defragmentation
ERR_NUM=Error number
NEED_BETTER_BROWSER=Setup has discoved that the current default browser \nis not able to read the Microsoft Web Site. If there is \nanother browser installed that is used to browse the \ninternet, use that browser to connect to:\n\nhttp://www.microsoft.com/windows/ie/download/default.asp\n\nIf there is no other browser installed, you will need to get a copy \nof Internet Explorer 4.01 or higher on CD.\n\nSetup will now exit.
NEED_ADMIN=must be installed and run from an Administrator account. Setup will now exit.
CANT_KILL=Unable to stop the Diskeeper Service. \nManually stop the Diskeeper Service via \nControl Panel | Services and then try to \ninstall again. \n\nSetup will now exit.
PRODUCT_KEY_9X=Diskeeper.msc
SD_STR_20125=%P Setup is now complete.
SD_STR_20103=A Diskeeper 1.0 or higher CD-ROM is required.
FOLDER_NAME_NT=DiskeeperSvr
IE5=5002014
DCOM98_VERSION_NEEDED=4,71,0,1719
NT5_NO_NO=Diskeeper is not currently supported on Windows 2000. \nSetup will now exit.
NO_DCOM_VERSION=Unable to get DCOM version number.
ERROR_CONNECT_SCMNGR=Error connecting to service manager.
REBOOT_MSG_3=Restart now - With Boot-Time defragmentation
IE4_NUMBER=4.10.1111
NO_START=Unable to start Diskeeper. You should be \nable to start it from the Executive Software \nprogram group in the Start menu.
NOW_DCOM=Installation almost complete. \nDCOM will install now. \n\nThis part of the install will end now.
NO_MMC=Setup has found MMC version
UNINST_KEY=Diskeeper
SD_STR_20126=You can view the README file or launch %P now. Choose the options you want below.
CURRENT_VERSION=CurrentVersion
NINEX_DRIVE_SPACE=1000
SERVICE_NOT_STOP=Error stopping the Diskeeper Service. Error: %d
SD_STR_20346=This version of Diskeeper is for Windows NT Workstation only. Setup will now exit.
SD_STR_20115=Error setting Diskeeper Version number, Setup cannot continue.
DK=Diskeeper
DK_UNINSTALL_NOGO=Unable to uninstall Diskeeper. Uninstall the current version of \nDiskeeper and then start setup again. Setup will now exit.
REBOOT_MSG_4=No restart - No Boot-Time defragmentation on next restart
WELL_COME=Welcome.
TITLE_CAPTIONBAR=Diskeeper Setup
NOT_IE=Setup has found that you do not have Internet \nExplorer version 4.10.1111 or higher installed \non your computer. This version or higher is \nrequired for Diskeeper operation. \n\nWould you like to install Internet Explorer 5 \nat this time? \n\nIf you chose not to install this newer version \nof Internet Explorer, setup will exit.
PRODUCT_NAME_NT=Diskeeper 5.0 Server
SD_STR_20127=Click Finish to complete Setup.
SD_STR_20138=must be installed and run from an Administrator account. Setup will now exit.
SD_STR_20116=Failed to set default Root Key in Creating Reg DB Entries
SD_STR_20105=Creating Program Folder and Icons....
SETUP_NAME=Setup.exe
REBOOT_MSG_5=No restart - Boot-Time defragmentation on next restart
MMC_NOT_ABLE=Unable to start Microsoft Management Console \nSetup. Please download the most recent version \nfrom Microsoft and install it, then run the Diskeeper \ninstallation again. \n\nSetup will now exit.
MMC_DESTIN_SPACE=3000
SD_STR_20117=Failed to create
SD_STR_20128=Yes, I want to view the README file.
SD_STR_20139=This upgrade version of Diskeeper requires that the Diskeeper 1.0X files exist on a local CD-ROM.
SD_STR_20106=Installing
NT_ONLY=This version of Diskeeper is for Windows NT only. Setup will now exit.
WOULD_YOU_LIKE_IE5=Setup has found that you have Internet Explorer 4 \ninstalled on your machine. We recommend installing \nInternet Explorer 5.0 on your system. \n\nWould you like to do this?
FAILED_LOAD_APIDLL=Failure loading ADVAPI32.DLL
REBOOT_PC=Your PC needs to be rebooted before continuing with this installation.\n\nChoose one of the following options and click OK to finish setup.
CREATE_FOLDER=Creating Program Folder entries
PRODUCT_NAME16=Diskeeper9x
SD_STR_20129=Yes, I want to launch %P.
SD_STR_20107=Setup
NO_REBOOT=System failed to reboot. Please reboot the machine \nmanually.
FOLDER_NAME=Diskeeper 5.0 Server
SAVE_SETTINGS=Would you like to save your previous settings?
ERROR_VGARESOLUTION=This program requires VGA or better resolution.
ERROR_FILE=File:
NTSYS_DRIVE_SPACE=1000
UNINST_DISPLAY_NAME_NT=Diskeeper 5.0 Server
NO_TCPIP=Setup did not find TCP/IP installed on your machine. \nIn order to allow a connection from Diskeeper Server, you will need to install this. \nOtherwise, you will need to run Diskeeper locally only.
SD_STR_20119=Decompressing Diskeeper files failed
SD_STR_20108=Failed to set default Root Key in Checking NT Version
MMC_VERSION_NEEDED=501920
DCOM95_VERSION_NEEDED=1.20
NO_DCOM2= on your computer. Version
START_SERVICE_ERROR=StartService ERROR %s could not be started. Returned error = %ld
REG_STAT=Creating Registry Settings...
PRODUCT_KEY_NT_WRK=Diskeeper.msc
SD_STR_20109=Could not find value of
NO_DCOM3= is required for Diskeeper operation. \n Would you like to install this version \nof DCOM? If you choose not to install \nthis newer version of DCOM, setup will exit.
ERROR_CREATE_FOLDER=Error creating Program Folder Shortcut.
OPEN_SC_MNGR_ERROR=OpenSCManagerA ERROR
CREATE_SERVICE_ERROR_NUM=CreateService ERROR %s could not be installed. Returned error = %ld
IE5_NUMBER=5.00.2014
PLS_WAIT_REG=Please wait while setup creates the Registry Entries...
DISKEEPER_UP2=The MMC is still running.\n\nSetup will now exit.
PLS_WAIT=Please wait...
CANT_DO_MEDIA=Unable to set which files to install. \n\nSetup will exit.
FOUND_DK=Setup has found Diskeeper installed. \nDiskeeper must be uninstalled before \ninstalling this version. Setup will now \nstart the Diskeeper Uninstall and then \ncontinue. If you choose not to uninstall\nSetup will exit.\n\nWould you like to uninstall Diskeeper at \nthis time?
NOT_REG=Failed to create a registry setting. Error:
PLEASE_WAIT=Please wait while install copies files.
UNINST_DISPLAY_NAME=Diskeeper 5.0 Server
PRODUCT_KEY=Diskeeper.msc
NOT_SREG=File(s) failed to self-register: \n
NT_PRODUCT_NAME=DiskeeperNT4
DCOM_BUILD=4,71,0,2612
NO_DCOM5=Setup has detected that you do not have DCOM installed. This software is \nrequired in order to run this version of Diskeeper. Setup can install this for \nyou now. If you do not want to install it, setup will exit.
MMC_VERSION_NUMBER=5.0.1920
NO_NT=This version of Diskeeper will only install on Windows NT. \n\nSetup will now exit.
PRODUCT_NAME=Diskeeper 5.0 Server
ERROR_UNINSTSETUP=unInstaller setup failed to initialize. You may not be able to uninstall this product.
NINEX_PRODUCT_NAME=Diskeeper 9X
NT_DESTIN_SPACE=2000
NINEX_DESTIN_SPACE=1000
COM_CHANGE_YN=This setup will change the DCOM Default Authentication Level \nto Connect and the DCOM Default Impersonation Level to \nImpersonate. This version of Diskeeper needs these settings in \norder to work correctly. \n\nClick Yes to continue or click No to exit Setup.
UNKNOWN_ERROR=An Unknown error occurred.
INSTALL_LOCAL_ONLY=must be installed to a local drive. Please specify a local drive for installation of
UNABLE_GET_NTFS=Unable to get the File Sytem type.
NT_SYSDRIVE_SPACE=1000
NO_START_DCOM=Unable to start the DCOM installation program. \n\r You will need to install DCOM before running Diskeeper. \n\rYou can get this from the Microsoft web site. \n\rSetup will now Exit.
INST_COMPLETE=Installation Complete.
README=Readme.txt
SD_STR_20140=Setup does not find any local CD-ROM drives.
DISKEEPER_UP=Setup has found that MMC is currently running. \nDiskeeper runs an MMC snap-in. You must shut \ndown the MMC before proceeding with this setup . \n\nPlease shut down the MMC and then click OK.
NO_DCOM=Setup has found DCOM version
DK_SIZE_SYS=There are a few Diskeeper files that must \nbe installed to the system drive. There is \ncurrently not enough space on your system \ndrive to install these files. \n\nPlease free up some space on the system \ndrive and then run setup again.
FAILED_START_BROWSER=Setup was unable to start your Web Browser. To connect \nto the Internet Explorer web site, go to:\nhttp://www.microsoft.com/windows/ie/download/default.asp
