home *** CD-ROM | disk | FTP | other *** search
- # 0
- Configure Game.
-
- This option lets you select the type of advanced sound and/or
- music card[s] you wish to use. It will allow you to make
- changes if your sound and/or music card is not set at the
- factory default settings. If you do not have a sound or music
- card, this option does not apply to you.
- # 1
- Read README File.
-
- This will display the README file. Last minute changes and
- changes to the product after the manual was printed will be
- documented in this file.
- # 2
- Make Boot Floppy.
-
- This option will make a start up floppy disk that will bring
- you directly into the program. It will also correct most
- memory problems. You will need a diskette that fits in your
- A: drive. YOU CAN ONLY DO THIS IN YOUR A: DRIVE WITH A HIGH
- DENSITY DISKETTE. Select MAKE BOOT FLOPPY and follow the
- on-screen instructions. To use this Boot Floppy, place the
- disk in your A: drive and re-boot your computer. If you do
- not need a BOOT FLOPPY, proceed to INSTALL GAME.
- # 3
- Install Game
-
- Copy the necessary game files to your local hard drive.
- # 4
- Exit.
-
- Selecting EXIT will terminate the install routine and return
- you to the DOS prompt.
- # 5
- Select Sound Card.
-
- This will let you choose from a list of different sound cards
- that are supported by this program. Move the highlighted bar
- over the desired type of sound card and press <ENTER>. After
- you specify the type of sound card, move the highlighted bar
- to CHANGE SOUND DEFAULT and press <ENTER>. See the CHANGE
- SOUND DEFAULT help-screen for assistance in setting the sound
- card interrupts. If you do not have an advanced sound card,
- select DONE and proceed to INSTALL GAME.
- # 6
- Select Music Card
-
- This will allow those who have more than one sound card to
- designate a specific sound card for music. Move the high-
- lighted bar over the desired sound card and press <ENTER>.
- Then move the highlighted bar to CHANGE SOUND DEFAULT and
- press <ENTER>. Follow the CHANGE SOUND DEFAULT help-screen
- for assistance in setting the sound card interrupts. If you
- do not have a music card, skip this option, select DONE and
- proceed to INSTALL GAME.
- # 7
- Change Sound Default.
-
- IO, DMA and IRQ settings refer to numerical parameters that
- permit your computer to properly recognize and use your sound
- card. If the sound card is not set to its default you will
- have to select this option and set-up the sound card. If you
- do not know what these settings are, use the test program that
- came with the sound card. If you still can not determine what
- the settings are, you will have to contact the sound card
- company for this information.
- # 8
- Change Music Default.
-
- IO, DMA and IRQ settings refer to numerical parameters that
- permit your computer to properly recognize and use your sound
- card. If the sound card is not set to its default you will
- have to select this option and set-up the sound card. If you
- do not know what these settings are, use the test program that
- came with the sound card. If you still can not determine what
- the settings are, you will have to contact the sound card
- company for this information.
- # 9
- Done.
-
- After you complete your selections and changes to the sound
- portion of the install routine, select DONE and return to
- the Main Menu.
- # 10
- Enter Path:
-
- This is where your game will be installed. All necessary files
- will be copied to this directory on your hard drive.
- # 11
- Change IO Address
-
- By selecting Change IO Address, you are allowed to change
- the default IO Address. Type the new IO Address and
- press <ENTER>.
- # 12
- Change IRQ
-
- By selecting Change IRQ, you are allowed to change the
- default setting IRQ to whatever other setting your
- card requires. Type the new IRQ setting and press <ENTER>.
- # 13
- Change DMA
-
- By selecting Change DMA, you are allowed to change the DMA
- setting. Type the DMA Channel your sound card is using
- and press <ENTER>.
- # 14
- Done.
-
- This will bring you back to the Configure Menu after your
- selections and changes are made.
- # 15
- How to enter the IO Address
-
- Type the three digit number to indicate the IO Address for
- the sound card you are using. Examples would be 220, 230, 240.
- # 16
- How to enter the IRQ
-
- Type the one or two digit number to indicate the IRQ setting
- for the sound card you are using. Examples would be 10, 5, 2.
- # 17
- How to enter the DMA
-
- Type the one digit number to indicate the DMA Channel for the
- sound card you are using. Examples would be 1, 2, 3.
- # 18
- ADVISORY: You do not have enough memory to run game.
-
- Because of other programs you are running, or the way your
- computer is configured, there is not enough CONVENTIONAL
- MEMORY to run this game. Use the MAKE BOOT FLOPPY option
- to correct this problem.
- # 19
- ADVISORY: No EMS driver found. Create some...
-
- This game requires you to have an EMS driver. This driver
- will turn XMS (Extended Memory) into EMS (Expanded Memory).
- Use the MAKE BOOT FLOPPY option to correct this problem.
- # 20
- ADVISORY: Possible Insufficient EMS.
-
- If you are running Delta-V without sound you will only need
- 2M (2097152 bytes) of free EMS memory.
-
- If you are tring to run Delta-V with sound effects you do NOT
- have enough free EMS. You need 2.5M (2621440 bytes) to be able
- to run with sound effects.
-
- You may try the MAKE BOOT FLOPPY option to free up some EMS.
- # 21
- DATA DIR
-
- This is where your saved games for this CD-ROM game will be
- stored. The batch file to start the game will also be written
- to this directory.
- # 22
- README file viewer.
-
- <UP> move file up 1 line
- <DOWN> move file down 1 line
-
- <ESC> quit viewing file
- #
-