home *** CD-ROM | disk | FTP | other *** search
- ΘÆPSTEST Version 5.00
- Copyright 1986-1990, The Periscope Company, Inc. All rights reserved.
- $This program is used to test Periscope I and III boards. The options are:
- /0 -- Test Periscope I, Rev 1 board (16K)
- /1 -- Test Periscope I, Rev 2 board (56K)
- /2 -- Test Periscope I, Rev 3 and I/MC boards (512-2048K)
- /3 -- Test Periscope III board (64K)
- /A -- Analyze memory use from segment A000H to F000H
- /C:nnnn -- Run tests multiple times, where nnnn is a hex number
- /E -- Set error exit mode, activating Periscope if an error is found
- /M:nnnn -- Use protected memory segment other than D000H
- /N -- Set noisy mode, beeping after each error
- /P:nnn -- Use write protect port other than 300H
- /S -- Set silent mode, showing only error messages
- /V -- Set verbose mode, placing each message on a separate line
- Note: The /M and /P options are not used when testing Model I/MC
- $stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack stack