Piper's Pit BBS/FTP: ibm 0010

home *** CD-ROM | disk | FTP | other *** search

/ Piper's Pit BBS/FTP: ibm 0010 - 0019 / ibm0010-0019 / ibm0010.tar / ibm0010 / CADKEY_B.ZIP / CADKEY7.ZIP / PMPTS.TXT < prev next >

Wrap

Text File | 1989-06-16 | 39.6 KB | 990 lines

119 144 119 1 1191 99 1191 Enter number of segments on generator curve (%d) => 11911 99 11911 Enter number of segments on director curve (%d) => 11912 99 11912 Select generator curve 11913 99 11913 Select director curve 11914 1442 11914 Choose sweeping motion 11915 990 11915 Curves connected correctly ? (%s) 1192 99 1192 Select 1st generator curve 11921 99 11921 Select 2nd generator curve (press RETURN for none) 11922 99 11922 Select 1st director curve 11923 99 11923 Select 2nd director curve 11924 99 11924 Enter number of segments on generator curve(s) (%d) => 11925 99 11925 Enter number of segments on director curve(s) (%d) => 1193 99 1193 . 11931 99 11931 Select 2nd generator curve 11933 99 11933 Select 2nd director curve (press RETURN for same as first) 11934 1001 11934 Indicate axis point 1194 99 1194 . 11942 99 11942 Enter number of segments along axis (%d) => 11943 1194 11943 Choose option to define cylinder axis. 119431 99 119431 116 11944 99 11944 Enter axis length ( "-" reverses dir) (%g) => 1195 99 1195 . 11951 1194 11951 Choose option to define rotation axis. 11952 99 11952 Enter rotation angle (%g) => 11953 99 11953 Enter number of segments in rotation direction (%d) => 1196 1196 1196 Choose Option 11961 99 11961 12101 11962 99 11962 12104 11963 99 11963 Enter number of latitude lines (%d) => 11964 99 11964 Enter number of longitude lines (%d) => 1197 99 1197 . 11971 1841 11971 1 11972 99 11972 Enter number of segments on curve (default = %d) => 11974 99 11974 Select 1st director near end to connect 119741 99 119741 Select 2nd director near end to connect 11977 990 11977 Create lines in cross-direction ? (%s) 11978 99 11978 Enter number of segments in cross-direction (%d) => 144 144 144 1 1441 99 1441 . 14413 1841 14413 Select curve segmentation in cross-direction 1442 99 1442 . 1443 99 1443 . 1444 99 1444 . 1445 99 1445 . 1446 99 1446 . 1447 99 1447 . 155 144 155 1 1551 99 1551 . 1552 99 1552 . 1553 99 1553 . 1554 99 1554 . 1555 99 1555 . 1556 99 1556 . 1557 99 1557 . 185 185 185 1 1851 1851 1851 1 1852 99 1852 . 1853 99 1853 . 1854 99 1854 . 1855 99 1855 . 1856 99 1856 . 1857 99 1857 . 1858 99 1858 . 198 198 198 1 1981 99 1981 . 1982 99 1982 . 1983 99 1983 . 1984 99 1984 . 1985 99 1985 . 1986 99 1986 . 0 0 0 Choose MAIN MENU option 1 1 1 Choose option 11 11 11 1 111 1001 111 Indicate start point 1111 1001 1111 Indicate end point 112 1001 112 111 1121 1001 1121 1111 113 113 113 1 1131 99 1131 Select reference line 11311 1001 11311 Indicate position 1132 99 1132 Enter distance (%g) => 11321 99 11321 Indicate side 114 114 114 1 1140 1001 1140 Indicate point 1141 99 1141 Indicate tangent entity 1142 99 1142 Indicate 1st tangent entity 1143 99 1143 Indicate 2nd tangent entity 1144 99 1144 Indicate perpendicular entity 1145 99 1145 Indicate 1st perpendicular entity 1146 99 1146 Indicate 2nd perpendicular entity 1147 99 1147 Indicate 3rd tangent entity 115 115 115 1 1151 1001 1151 Indicate point 1152 1001 1152 1151 1153 1001 1153 1151 116 99 116 Select a line near endpoint desired 1161 99 1161 Enter angle (%g) => 117 117 117 1 1171 1001 1171 Indicate 1st corner of rectangle 11711 1001 11711 Indicate 2nd corner of rectangle 11712 99 11712 1243 1172 99 1172 Enter width of rectangle (%g) => 11721 99 11721 Enter height of rectangle (%g) => 11722 1001 11722 Indicate lower-left corner 118 99 118 181 1181 99 1181 1811 1182 182 1182 1 1183 99 1183 1812 1184 1001 1184 1816 12 12 12 1 121 1001 121 Indicate center 12101 99 12101 Enter radius (%g) => 12102 99 12102 Enter start angle (%g) => 12103 99 12103 Enter end angle (%g) => 12104 99 12104 Enter diameter (%g) => 122 1001 122 121 123 1001 123 121 1231 1001 1231 Indicate edge 124 1001 124 Indicate 1st point 1241 1001 1241 Indicate 2nd point 1242 1001 1242 Indicate 3rd point 125 125 125 1 1251 99 1251 Select tangent entity 1253 99 1253 1252 126 1001 126 Indicate starting point 1261 1001 1261 Indicate ending point 1262 99 1262 Enter included angle (%g) => 127 99 127 1251 1271 1001 1271 Indicate arc termination point 1272 1262 1272 1 1273 99 1273 11512 13 13 13 1 131 1001 131 121 132 1001 132 121 133 1001 133 121 1331 1001 1331 1231 134 1001 134 124 1341 1001 1341 1241 1342 1001 1342 1242 1343 99 1343 1243 135 125 135 1 1351 99 1351 Select tangent entity 1353 99 1353 1252 136 1001 136 Indicate 1st point of diameter 1361 1001 1361 Indicate 2nd point of diameter 14 14 14 1 141 1001 141 Indicate position for point 142 99 142 Select arc or circle 1421 99 1421 Enter angle (%g) => 143 143 143 1 1431 99 1431 Select entity 1432 99 1432 Processing... please wait 1433 99 1433 Enter number of segments on curve (default = %d) => 1434 99 1434 Enter distance between points (default=%g) => 1435 99 1435 Enter distance along curve (default=%g) => 145 99 145 Select spline 15 15 15 1 151 1001 151 Indicate start point 1511 1001 1511 Indicate end point (RETURN to exit) 1512 990 1512 Save current entity ? (%s) 1513 990 1513 Close current polyline entity ? (%s) 152 117 152 1 1521 1001 1521 1171 15211 1001 15211 11711 15212 99 15212 11712 1522 99 1522 1172 15221 99 15221 11721 15222 1001 15222 11722 153 99 153 181 1531 99 1531 1811 1532 99 1532 1812 1533 182 1533 1813 1534 184 1534 1814 1535 99 1535 1815 1536 1001 1536 184 154 99 154 Press cursor button to indicate start point of line string 1541 99 1541 Hold down cursor button to generate continuous lines 1542 990 1542 1512 16 16 16 1 161 161 161 1 1611 99 1611 Select 1st fillet entity 1612 99 1612 Select 2nd Fillet entity 162 99 162 Select 1st line 1621 99 1621 Select 2nd line 1622 99 1622 Enter 1st distance (%g) => 1623 99 1623 Enter 2nd distance (%g) => 17 17 17 1 171 171 171 1 17111 1001 17111 Indicate 1st point 17112 1001 17112 Indicate 2nd point 17113 1001 17113 Indicate 3rd point 17114 1001 17114 Indicate 4th point 17115 1001 17115 Indicate 5th point 17121 17121 17121 Choose slope definition method 17122 17122 17122 17121 17123 99 17123 Key-in point number for 1st slope (default=%d) => 17124 99 17124 Key-in point number for 2nd slope (default=%d) => 17125 99 17125 Enter rho value (default=%g) => 1721 99 1721 Enter A (default=%g) => 1722 99 1722 Enter B (default=%g) => 1723 99 1723 Enter C (default=%g) => 1724 99 1724 Enter D (default=%g) => 1725 99 1725 Enter E (default=%g) => 1726 99 1726 Enter F (default=%g) => 173 173 173 Choose method for defining directrix 1731 1001 1731 17111 1732 1001 1732 17112 1733 99 1733 Indicate line entity 1734 99 1734 Select entity 1735 1001 1735 Indicate focus 1736 1001 1736 Indicate 1st limit point 1737 1001 1737 Indicate 2nd limit point 174 99 174 ERROR (%d,%d,%d) - Invalid Input (Press RETURN) 1741 99 1741 Enter semi-major axis length (default=%g) => 1742 99 1742 Enter semi-minor axis length (default=%g) => 1743 99 1743 Enter major axis angle (default=%g) => 1744 99 1744 12102 1745 99 1745 12103 18 18 18 1 181 99 181 Enter number of sides (%d) => 1811 99 1811 Enter rotation angle (%g) => 1812 99 1812 Enter radius (%g) => 1813 182 1813 Choose option for specifying radius 1814 184 1814 Choose polygon fill style 1815 99 1815 Enter polygon fill color range 0 - 255 (%d) => 1816 1001 1816 Indicate center 182 99 182 181 1821 99 1821 1811 1822 99 1822 Enter length of polygon side (%g) => 1823 184 1823 1 1824 99 1824 1815 1825 1001 1825 1816 183 117 183 1 1831 184 1831 1 18311 99 18311 1815 18312 1001 18312 1171 18313 1001 18313 11711 1832 99 1832 1172 18321 99 18321 11721 18322 184 18322 1 18323 99 18323 1815 18324 1001 18324 11722 184 184 184 1 1841 99 1841 1815 1842 1001 1842 Indicate start point 1843 1001 1843 Indicate end point (RETURN to end) 1844 1001 1844 Points are colinear... select new point 1845 1001 1845 Current point not in plane, re-select 1846 990 1846 1512 19 19 19 1 1901 990 1901 Switch to spline definition view ? 191 191 191 Choose start condition 1910 192 1910 191 1911 99 1911 Enter x vector component (default=%g) => 1912 99 1912 Enter y vector component (default=%g) => 1913 99 1913 Enter z vector component (default=%g) => 1917 99 1917 Enter vector magnitude (%g) => 1918 99 1918 Enter angle (default=%g) => 192 191 192 Choose end condition 1920 192 1920 192 1921 99 1921 1911 1922 99 1922 1912 1923 99 1923 1913 1924 99 1924 1913 1925 99 1925 1914 1926 99 1926 19141 1927 99 1927 1917 1928 99 1928 1918 193 1001 193 Indicate knot point (RETURN when done) 1951 195 1951 Choose helix screw direction 1952 99 1952 Enter pitch (turns per unit length) (%g) => 1953 196 1953 Choose method of specifying helix length 19531 99 19531 Enter number of rotations (%g) => 19532 99 19532 Enter arc length (%g) => 19533 99 19533 Enter distance along major axis (%g) => 1954 1001 1954 Indicate first point on major axis 1955 1001 1955 Indicate second point on major axis 1956 1001 1956 Indicate starting point for helix 1957 99 1957 Creating helix... please wait 1961 1001 1961 Indicate spline start point 1962 1001 1962 Indicate 2nd point 1963 1001 1963 Indicate end point or press RETURN 2 2 2 1 21 21 21 1 211 99 211 Select entity to trim 2111 99 2111 Select trimming entity (position cursor near intersection) 212 99 212 Select 1st entity to trim 2121 99 2121 Select 2nd entity to trim (position cursor near intersection) 213 99 213 Select 1st trimming entity (position cursor near intersection) 2131 99 2131 Select 2nd trimming entity (position cursor near intersection) 2132 99 2132 211 214 99 214 213 2141 99 2141 2131 2142 99 2142 211 215 99 215 Select trimming entity 2151 99 2151 Select entity to trim near intersection 22 21 22 1 221 99 221 Select entity to break 2211 99 2211 Select breaking entity (position cursor near intersection) 222 99 222 Select 1st entity to break 2221 99 2221 Select 2nd entity to break (position cursor near intersection) 223 99 223 Select 1st breaking entity (position cursor near intersection) 2231 99 2231 Select 2nd breaking entity (position cursor near intersection) 2232 99 2232 221 224 99 224 223 2241 99 2241 2231 2242 99 2242 2232 225 99 225 Select breaking entity 2251 99 2251 Select entity to break (position cursor near intersection) 23 23 23 1 232 99 232 Enter level number 1-256 to recall => 2320 99 2320 Recalling deleted entities... 24 24 24 1 25 25 25 Choose option 2510 99 2510 Grouping entities... please wait 252 99 252 Enter group name (%s): 2520 99 2520 Enter subgroup number (1-256) => 2521 99 2521 Adding entities to group... please wait 2530 99 2530 Degrouping entities... please wait 254 99 254 252 2540 99 2540 Deleting group... please wait 255 99 255 GROUP TABLE 2550 99 2550 Name Subgroups 2551 99 2551 Press RETURN for next page 2552 99 2552 Total number of groups in part = %d (press RETURN) 26 26 26 Choose option for segmentation 261 99 261 Enter number of line/curve segments (%d) => 261 99 261 Enter number of segments to create (%d) => 262 99 262 Select entity 263 99 263 Enter start angle on arc (%g) => 264 99 264 Enter end angle on arc (%g) => 265 990 265 Is this correct ? (%s) 27 27 27 1 270 99 270 Select node to be moved 271 1001 271 Indicate new location for node 272 99 272 Select spline near end to be changed 29 29 29 1 2901 990 2901 Include intersecting entities ? (%s) 2902 9915 2902 Choose method for defining section plane 2903 1001 2903 Indicate side of plane to preserve 2904 99 2904 1432 294 294 294 1 2941 99 2941 . 2942 99 2942 . 3 3 3 1 31 31 31 Choose dimension type 31001 12 31001 Indicate dimension text position 3101 1001 3101 Indicate 2nd position 3102 99 3102 3141 3103 99 3103 Enter dimension text string 311 1001 311 Indicate 1st position 312 1001 312 311 313 1001 313 311 314 99 314 Select arc to be dimensioned 31401 332 31401 Choose leader side (current=%s) 31402 990 31402 Accept dimension ? (YES) 3141 99 3141 Indicate dimension text position 315 99 315 Select first line 3151 99 3151 Select second line 3152 99 3152 Select angle to be dimensioned 3153 99 3153 3141 3154 990 3154 31402 316 99 316 314 31601 332 31601 31401 31602 990 31602 31402 3161 99 3161 3141 317 1001 317 Indicate height of witness lines 32 32 32 Choose option 321 1007 321 Enter text: 322 99 322 Enter disk note file name: 323 99 323 Enter text file name: 324 99 324 Select note entity 3241 99 3241 Enter text file name: 3210 99 3210 Indicate text position 3221 1007 3221 Enter dimension text string (%s): 33 99 33 32 332 99 332 Cursor indicate leader side 334 1001 334 Indicate arrow tip position 335 990 335 Accept label? (YES) 34 34 34 1 341 341 341 1 3411 1001 3411 111 34111 1001 34111 1111 3412 1001 3412 111 34121 1001 34121 1111 3413 99 3413 1131 34131 1001 34131 11311 3414 99 3414 1131 34141 1001 34141 11311 342 341 342 Choose witness line method 35 35 35 Choose crosshatch style 351 99 351 Enter angle for hatch lines (%g) => 352 99 352 Enter distance between hatch lines (%g) => 353 99 353 Crosshatching... please wait 354 990 354 Selection complete ? (%s) 37 37 37 Choose attribute to be changed 370 99 370 Select dimension 3701 99 3701 Select entity 371 371 371 Choose attribute to be changed 3711 3943 3711 Choose new font style 3712 99 3712 Enter new text height => 3713 99 3713 Enter new text angle => 3714 99 3714 Enter new character aspect ratio => 3715 99 3715 . 3716 990 3716 Mirror note text ? 3717 99 3716 Enter text slant angle => 3718 990 3717 Fill font ? 372 99 372 3701 3722 99 3722 Indicate new text position 3721 99 373 Select text for editing 373 99 373 Enter new dimension text string => 374 99 374 Enter new dimension value (actual=%g) => 375 3931 375 1 3751 393 3751 Choose decimal precision 3752 3932 3752 Choose round off factor 3753 3932 3753 3752 376 3921 376 Choose new witness line display option (current = %s) 377 391 377 Choose arrows option 3771 3911 3771 Choose new arrow direction (current=%s) 3772 3912 3772 Choose new arrowhead style 378 378 378 Choose option for tolerance change 3781 3781 3781 Choose tolerance value to be changed 37811 99 37811 Enter new positive tolerance => 37812 99 37812 Enter new negative tolerance => 3782 3951 3782 Choose new tolerance mode 379 99 379 Enter new dimension scale factor => 38 99 38 . 39 39 39 Choose parameter to set 391 391 391 Choose arrows option 3911 3911 3911 Choose arrowhead direction (current=%s) 3912 3912 3912 Choose new arrowhead style (current=%s) 392 392 392 Choose option 3921 3921 3921 Choose witness lines display option (current=%s) 3922 3922 3922 Choose new leader display option (current=%s) 393 393 3931 Choose decimal precision (current=%s) 3931 3931 393 1 3932 3932 3932 Choose round off factor (current=%s) 394 394 394 Choose text set option 3941 99 3941 Enter dimension text height (current=%g) => 3942 99 3942 Enter note text height (current=%g) => 3943 3943 3943 Choose dimension text style (current=%s) 3944 3943 3944 Choose note text style (current=%s) 3945 3945 3945 Choose alignment to be changed 39451 39451 39451 Choose horizontal alignment (current=%s) 39452 39452 39452 Choose vertical alignment (current=%s) 3946 3945 3946 Choose alignment to be changed 3947 99 3947 Enter new note angle (current=%g) => 3948 99 3948 Enter new character aspect ratio (current=%g) => 3949 990 3949 Underline text? (current=%s) 395 395 395 Choose dimension type for tolerance change(s) 3951 3951 3951 Choose tolerance mode 39512 39512 39512 Choose parameter to change 395121 99 395121 Enter positive tolerance (current=%g) => 395122 99 395122 Enter negative tolerance (current=%g) => 395123 990 395123 Display 0 tolerance without decimal or sign ? (current=%s) 395124 990 395124 Display +/- tols as one value if possible ? (current=%s) 39513 39513 39513 Choose parameter to change 3952 3951 3952 Choose tolerance mode 396 396 396 1 3961 3961 3961 Choose option for displaying zeros in dimension strings 39611 990 39611 Display leading zero before decimal point ? (current=%s) 39612 990 39612 Display trailing zeros ? (current=%s) 3962 990 3962 Align dimension text ? (current=%s) 3963 3963 3963 Manual or automatic dimensioning mode ? (current=%s) 397 397 397 Choose dimension scaling units (current=%s) 3977 99 3977 Enter dimension scale factor (current=%g) => 398 990 398 Automatically update values ? (current=%s) 399 990 399 Suppress dimension verification message ? (current=%s) 3991 3000 317 Choose dimension option 3992 3001 3992 Choose dimension axis option 3993 3002 3171 Choose text alignment option 3994 1001 3994 Indicate base position 3995 1001 3995 Indicate base text position 39951 990 Stack dimension text ? (current=%s) 3996 1001 3996 Indicate position 39961 1001 39961 Indicate position (RETURN when done) 39962 1001 39962 Indicate base position 3997 1001 3997 Indicate first point on axis 3998 1001 3998 Indicate second point on axis 3999 3003 3172 Choose modification option 399991 99 399991 Indicate dimension text position 399999 99 399999 Indicate viewport to create crosshatch in 4 4 4 1 4000 99 4000 Transforming entities... please wait 402 99 402 Enter number of copies (%d) => 41 40 41 1 4102 99 4102 Enter rotation angle (%g) => 4103 99 4103 Enter scale factor (%g) => 411 99 411 . 41121 1001 41121 Indicate base position 41122 1001 41122 Indicate new base position 41131 1001 41131 Indicate rotation origin 41132 1001 41132 Indicate scaling origin 41151 1001 41151 Indicate 1st position for mirror 41152 1001 41152 Indicate 2nd position for mirror 412 99 412 . 4121 99 4121 Indicate viewport for transformation 413 99 413 . 42 40 42 41 421 99 421 . 422 99 422 . 423 99 423 . 43 40 43 41 431 99 431 . 432 99 432 . 433 99 433 . 44 40 44 41 441 99 441 . 442 99 442 . 443 99 443 . 45 40 45 1 451 99 451 . 452 99 452 . 453 99 453 . 46 40 46 1 461 99 461 . 4611 9915 4611 Choose method for defining projection plane 4612 4612 4612 Choose projection type 46122 46122 46122 Choose method for defining projection direction 4613 1001 4613 Indicate start point 4614 1001 4614 Indicate end point 462 99 462 . 463 99 463 . 5 5 5 1 51 51 51 1 511 99 511 Saving part file... please wait 5110 99 5110 Saving part file... please wait 5112 990 5112 File already exists, replace it ? (%s) 5114 99 5114 Enter part file name (%s): 5115 99 5115 Auto-save in progress... please wait 512 99 512 . 5120 990 5120 Save current part first ? (%s) 5121 99 5121 5114 5125 99 5125 Loading part file... please wait 513 99 513 Enter part directory pathname (%s): 5131 99 5131 Cursor-select part file to load or press RETURN to exit 5132 990 5132 %s to be loaded... save current part first ? (YES) 5133 99 5133 Loading part file... please wait 5134 990 5134 Unrecognized entry of type (%s) in part file, continue? (YES) 52 52 52 1 521 99 521 . 5210 99 5210 Enter pattern file name (%s): 5211 1001 5211 Indicate pattern base position 5212 991 5212 1 5213 99 5213 Select entity 5214 990 5214 5112 5216 99 5216 Creating pattern... please wait 522 99 522 5210 5220 990 5220 Group pattern entities ? (%s) 5221 99 5221 Enter scale factor (%g) => 5222 99 5222 Enter rotation angle (%g) => 52222 522 52222 Choose level option (%s) 52223 99 52223 Enter new level number (%d) => 52224 99 52224 Enter level offset value (%d) => 5224 99 5224 Not a pattern or invalid version... press RETURN 5227 99 5227 Retrieving pattern... please wait 523 99 523 Enter pattern directory pathname (%s): 5231 99 5231 Cursor-select pattern to retrieve or press RETURN to exit 5232 99 5232 Cursor-select pattern to retrieve or press RETURN for next page 53 53 53 1 531 99 531 Enter plot file name (%s): 5310 5310 5310 Choose option for dumping entity plot colors (%s) 53100 99 53100 Making plot file... please wait 532 99 532 Enter plot file directory pathname (%s): 5321 99 5321 Press RETURN to exit function 5322 99 5322 Press RETURN for next page 54 54 54 1 541 541 541 Choose output option 5410 99 5410 Enter CADL file name (%s): 5411 99 5411 Enter level number to dump entities from (%d) => 5412 99 5412 Writing to CADL file... please wait 5413 99 5413 Enter text: 5418 5410 5418 Choose option to set 54181 99 54181 Enter # of digits to the right of the dec. pt. (%d) => 54182 990 54182 Output entity attributes to CADL file ? (%s) 54183 5411 54183 Choose representation for splines in CADL file (%s) 542 99 542 5410 54201 99 54201 Executing CADL file... please wait 54202 99 54202 %s 54203 1001 54203 %s 54204 99 54204 Press RETURN to continue 543 99 543 5410 544 99 544 Enter CADL directory pathname (%s): 5441 99 5441 Select CADL file to execute or press RETURN to exit function 55 55 55 1 550 550 550 Label (%s) already in use, choose option 5501 990 5501 Macro library does not exist, create ? (%s) 55011 990 55011 Macro already exists, replace ? (%s) 5502 990 5502 No macro library currently loaded, load one ? (%s) 551 551 551 Choose macro data option 5511 99 5511 Enter name of macro library to create: 5512 99 5512 Enter name of macro library to load: 5513 99 5513 Enter name of macro library to append (%s): 5514 99 5514 Enter name of macro to delete: 5515 99 5515 Cursor-select macro to execute or press RETURN to exit 5516 99 5516 Current Macro File => 5517 99 5517 Cursor select a macro to execute 552 552 552 Choose macro binding option 5520 99 5520 Enter prompt text: 5521 99 5521 Enter name of bindings file to save (%s): 55210 99 55210 Saving bindings file... 55211 990 55211 Bindings file already exists, replace ? (%s) 5522 99 5522 Enter bindings file to load (%s): 55220 99 55220 Macro %s line %d of binding file not in library (Hit RETURN) 5523 99 5523 Press macro key to bind 55231 99 55231 Binding macro key... 55241 99 55241 Select tablet area to bind 552411 99 552411 Binding tablet area... 5525 99 5525 Press key to bind to tablet 5526 99 5526 Press macro key to clear 55261 99 55261 Clearing macro key... 5527 99 5527 Select tablet function area to clear 55271 99 55271 Clearing tablet area... 5528 99 5528 Enter macro name to change: 55281 99 55281 Enter new macro name: 555 99 555 Enter macro name: 55511 99 55511 Executing macro... press ESC to abort 5552 99 5552 Enter macro name (%s): 55520 99 55520 Enter loop condition (1) => 555201 99 555201 If loop condition is non-zero chain to macro (%s) 555202 99 555202 If loop condition is zero chain to macro (%s) 55521 99 55521 Enter name of text file: 56 56 56 Choose list format for cursor selection (current=%s) 57 57 57 Choose database redraw mode (current=%s) 59999 990 59999 Bindings file was updated. Save changes ? (current=%s) 6 6 6 Choose DISPLAY option 61 99 61 Cursor-indicate viewport to REDRAW or press CR for all 610 99 610 Redrawing display... press ESC to abort 615 99 615 Automatic scaling in progress... please wait 62 99 62 Cursor-indicate viewport to PAN 620 99 620 Cursor-indicate new window position 63 63 63 Choose ZOOM option 631 99 631 Cursor-indicate viewport to HALF SCALE or press CR for all 632 99 632 Cursor-indicate viewport to DOUBLE SCALE or press CR for all 633 99 633 Cursor-indicate viewport to SCALE 6330 99 6330 Enter new scale factor (%g) => 6331 99 6331 Cursor-indicate new center in viewport 634 99 634 Cursor-indicate 1st corner of new window 6340 99 6340 Cursor-indicate 2nd corner of new window 635 99 635 Cursor-indicate viewport to AUTO SCALE or press CR for all 64 64 64 Choose DISPLAY VIEW operation 640 99 640 Cursor-select viewport 641 64 641 Enter view number or choose menu option (1-%d) => 642 99 642 Cursor-select reference viewport 643 99 643 Select an arc, conic or 2-D spline 65 65 65 Choose VIEWPORT operation 651 99 651 Cursor-indicate lower-left corner of viewport 6510 99 6510 Cursor-indicate upper-right corner of viewport 652 99 652 Cursor-indicate viewport to remove 653 99 653 Cursor-indicate viewport to move 6530 99 6530 Cursor-indicate new viewport position 654 99 654 Cursor-indicate viewport near corner to move 6540 99 6540 Cursor-indicate new position for viewport corner 655 99 655 Cursor-select viewport layout from menu 656 99 656 Cursor-indicate viewport for attribute display 6560 99 6560 VIEW #%d 6561 99 6561 SCALE=%.4f 6562 99 6562 X1=%.4f Y1=%.4f 6563 99 6563 X2=%.4f Y2=%.4f 66 66 66 Choose LEVELS option 661 99 661 Enter new level number from 1-256 (current=%d) => 662 99 662 Enter level(s) to be added => 663 99 663 Enter level(s) to be removed => 664 664 664 Choose option for specifying entities to move 6640 99 6640 Move entities to level => 6641 99 6641 Move entities from level => 6642 99 6642 To level => 6643 99 6643 Moving entities... please wait 665 665 665 Choose option from menu or cursor-indicate level(s) to change 6650 665 6650 Displayed Levels List - TURN LEVEL(S) ON 6651 665 6651 Displayed Levels List - TURN LEVEL(S) OFF 6652 665 6652 Displayed Levels List - TOGGLE LEVEL(S) ON/OFF 6653 665 6653 Cursor-indicate the level number to change. To box select, move 6654 665 6654 the cursor to another level number before releasing the button. 666 99 666 Enter level number or 0 for no mask (current = %d) => 67 67 67 Choose GRID/SNAP option 671 671 671 Choose option for grid display (current=%s) 672 99 672 Enter X grid increment (%g) => 6720 99 6720 Enter Y grid increment (%g) => 673 1001 673 Indicate new grid alignment point 674 99 674 . 675 681 675 Choose snap option (current=%s) 676 99 676 Enter X snap increment (%g) => 6760 99 6760 Enter Y snap increment (%g) => 677 1001 677 Indicate new cursor snap alignment point 678 99 678 . 68 68 68 Choose AXES option 681 681 681 Choose option for display view axes display (current=%s) 682 682 682 Choose option for construction view axes display (current=%s) 69 69 69 Choose CURSOR option 691 691 691 Choose option for tracking coordinate display (current=%s) 692 692 692 Choose DIGITIZE option 6921 99 6921 . 6922 99 6922 . 69220 99 69220 Cursor-indicate digitizing origin 69221 99 69221 Cursor-indicate first point on X axis 69222 99 69222 Cursor-indicate second point on X axis 69223 99 69223 Enter actual distance between reference points (%g) => 7 7 7 1 71 71 71 Choose option for data display 711 99 711 Select entity to verify 7110 99 7110 Type = %d Form = %d Level = %d Def view = %d (press RET) 7111 99 7111 Color = %d Style = %d Width = %d Pen = %d (press RET) 7112 99 7112 Grp name = %s Grp # = %d Subgrp # = %d (press RET) 7113 99 7113 Txt Ht = %g Aspect = %g Arrow = %d (press RET) 712 99 712 711 7120 99 7120 X= %g Y= %g Z= %g (press RET) 71200 99 71200 St ang = %g (%g) End ang = %g (%g) (press RET) 71201 99 71201 Start point: X= %g Y= %g Z= %g (press RET) 712010 99 712010 Actual dimension value D = %g (press RET) 712011 99 712011 Ctr, Rad X = %g Y = %g R = %g (press RET) 712012 99 712012 St Ang, End Ang S = %g E = %g (press RET) 712013 99 712013 Text Coordinate TX = %g TY = %g (press RET) 712014 99 712014 Number of points P = %d (press RET) 712015 99 712015 Number of vertices V = %d (press RET) 71202 99 71202 End point: X= %g Y= %g Z= %g (press RET) 71203 99 71203 Start point: XV= %g YV= %g ZV=%g (press RET) 71204 99 71204 End point: XV= %g YV= %g ZV= %g (press RET) 71205 99 71205 Dimension = %d Number of segments = %d (press RET) 71206 99 71206 Reference point RX1 = %g RY1 = %g (press RET) 71207 99 71207 Reference point RX2 = %g RY2 = %g (press RET) 71208 99 71208 Reference point RX3 = %g RY3 = %g (press RET) 71209 99 71209 Reference point RX4 = %g RY4 = %g (press RET) 7121 99 7121 XV= %g YV= %g ZV= %g (press RET) 71211 99 71211 Conic Type %d, %d Segments (Press RETURN) 7122 99 7122 X1= %g Y1= %g Z1= %g (press RET) 7123 99 7123 X2= %g Y2= %g Z2= %g (press RET) 7124 99 7124 XV1= %g YV1= %g ZV1= %g (press RET) 7125 99 7125 XV2= %g YV2= %g ZV2= %g (press RET) 7126 99 7126 Actual len = %g Proj Len = %g (press RET) 7127 99 7127 Center: X= %g Y= %g Z= %g (press RET) 7128 99 7128 Center: XV= %g YV= %g ZV= %g (press RET) 7129 99 7129 Sweep ang = %g (%g) Radius = %g (press RET) 713 713 713 1 7131 1001 7131 Indicate 1st position 71311 1001 71311 Indicate 2nd position 71312 99 71312 Proj distance = %g Actual distance = %g 7132 1001 7132 Indicate position 71321 99 71321 Select point or curve 71322 99 71322 Min proj distance = %g Min actual distance = %g 7133 99 7133 Select 1st Entity 71331 99 71331 Select 2nd Entity 71332 99 71332 Min projected distance = %g 71333 99 71333 Projected pt1: xv = %g yv = %g 71334 99 71334 Projected pt2: xv = %g yv = %g 71335 99 71335 Min actual distance = %g 71336 99 71336 Actual pt1: x = %g y = %g z = %g 71337 99 71337 Actual pt2: x = %g y = %g z = %g 71338 99 71338 Actual pt1: xv = %g yv = %g zv = %g 71339 99 71339 Actual pt2: xv = %g yv = %g zv = %g 714 99 714 7133 7140 99 7140 Conic type = %s (press RET) 71401 99 71401 A=%g B=%g C=%g (press RET) 714011 99 714011 D=%g E=%g F=%g (press RET) 71402 99 71402 Eccentricity = %g Angle = %g (press RET) 71403 99 71403 Start point: XD= %g YD= %g ZD= %g (press RET) 71404 99 71404 Start point: X= %g Y= %g Z= %g (press RET) 71405 99 71405 End point: XD= %g YD= %g ZD= %g (press RET) 71406 99 71406 End point: X= %g Y= %g Z= %g (press RET) 71407 99 71407 Major: St pt: XD= %g YD= %g ZD= %g (press RET) 71408 99 71408 Major: St pt: X= %g Y= %g Z= %g (press RET) 71409 99 71409 Major: End pt: XD= %g YD= %g ZD= %g (press RET) 7141 99 7141 71331 71410 99 71410 Major: End pt: X= %g Y= %g Z= %g (press RET) 71411 99 71411 Major: Axis Len = %g (press RET) 71412 99 71412 Minor: St pt: XD= %g YD= %g ZD= %g (press RET) 71413 99 71413 Minor: St pt: X= %g Y= %g Z= %g (press RET) 71414 99 71414 Minor: End pt: XD= %g YD= %g ZD= %g (press RET) 71415 99 71415 Minor: End pt: X= %g Y= %g Z= %g (press RET) 71416 99 71416 Minor: Axis Len = %g (press RET) 71417 99 71417 Focus pt: XD= %g YD= %g ZD= %g (press RET) 71418 99 71418 Focus pt: X= %g Y= %g Z= %g (press RET) 7142 99 7142 Angle in display plane = %g (%g) (press RETURN) 71420 99 71420 Center: XD= %g YD= %g ZD= %g (press RET) 71421 99 71421 Center: X= %g Y= %g Z= %g (press RET) 71422 99 71422 Vertex: XD= %g YD= %g ZD= %g (press RET) 71423 99 71423 Vertex: X= %g Y= %g Z= %g (press RET) 71424 99 71424 Directrix A= %g B= %g C=%g (press RET) 71425 99 71425 Semi-parameter len = %g (press RET) 71426 99 71426 Transverse Axis Len = %g (press RET) 71427 99 71427 Conj.: St pt: XD= %g YD= %g ZD= %g (press RET) 71428 99 71428 Conj.: St pt: X= %g Y= %g Z= %g (press RET) 71429 99 71429 Conj.: End pt: XD= %g YD= %g ZD= %g (press RET) 7143 99 7143 Angle in plane of lines = %g (%g) (press RETURN) 71430 99 71430 Conj.: End pt: X= %g Y= %g Z= %g (press RET) 71431 99 71431 Conjugate Axis Len = %g (press RET) 71432 99 71432 Asymptote A= %g B= %g C=%g (press RET) 715 715 715 1 7151 99 7151 Select arc/circle 7152 99 7152 Calculating perimeter... please wait 7153 99 7153 Proj len = %g Actual len = %g (press RETURN) 716 716 716 1 71610 99 71610 Calculating area... please wait 71611 99 71611 Area = %g (press RETURN) 71612 99 71612 Centroid: XV = %g YV = %g (press RETURN) 71630 99 71630 Enter panel width interval (%g) => 717 716 717 716 71710 1001 71710 Indicate position for axis 71711 99 71711 Calculating moment of inertia... please wait 71712 99 71712 Moment of inertia: Polar (Ix + Iy) = %g (press RET) 71713 99 71713 Moment of inertia: Ix (YV = %g) = %g (press RET) 71714 99 71714 Moment of inertia: Iy (XV = %g) = %g (press RET) 718 718 718 1 72 72 72 Choose attribute type 72021 99 72021 Select entities (press RETURN when done) 721 721 721 1 7211 99 7211 Cursor-select new color or press RETURN to key-in color number 72110 99 72110 Enter new color number from 0-%d => 7212 99 7212 Cursor-select color or press RETURN to key-in color number 72120 99 72120 Enter color number from 0-%d => 722 721 722 1 7220 99 7220 Changing entities... please wait 7221 99 7221 Cursor-select new line type or press RETURN to menu-select 72210 72210 72210 Choose new line type (current=%s) 7222 99 7222 Cursor-select line type or press RETURN to menu-select 72220 72210 72220 Choose line type 723 721 723 1 7231 99 7231 Select new line width or press RETURN to key-in line width 72310 99 72310 Enter new line width as odd number from 1-15 (current=%d) => 7232 99 7232 Select line width or press RETURN to key-in line width 72320 99 72320 Enter line width as odd number from 1-15 => 724 721 724 1 7241 99 7241 Enter new pen number from 1-8 (current=%d) => 7242 99 7242 Enter pen number from 1-8 => 725 184 725 1814 7251 99 7251 7212 7252 99 7252 Cursor-select color or press RETURN to key-in color number 73 73 73 1 731 731 731 Enter const. plane number or choose menu option (1-%d) => 7312 99 7312 Cursor-select viewport with desired view 732 732 732 Choose option for setting construction depth 7321 99 7321 Enter new depth (current=%g) => 7322 1006 7322 Indicate position at new depth 7323 99 7323 Enter offset value (%lf) => 733 733 733 Choose mode for construction (current=%s) 734 734 734 Choose line limits mode (current=%s) 7340 99 7340 Cursor-indicate viewport to use for limits 74 74 74 Choose mode for coordinate entry (current=%s) 75 99 75 Available memory = %7.0f bytes (press RETURN) 751 99 751 Free disk storage = %9.0f bytes (press RETURN) 76 99 76 . 760 99 760 Align top of paper with printer head... press RETURN when ready 761 99 761 Processing entities... press ESC to abort 7610 7610 7610 Printer error - choose option 762 99 762 Generating image... press ESC to abort 77 77 77 Choose option for plotting scale 771 99 771 Enter plot scale (%g) => 772 99 772 Enter x offset (%g) => 773 99 773 Enter y offset (%g) => 774 5310 774 Choose option for assigning plotter pens to entities (%s) 775 99 775 Prepare plotter for operation... press RETURN when ready 776 99 776 Plotting in progress... please wait 777 990 777 Do you wish to display the scale and offsets ? (%s) 778 99 778 Cursor-select viewport to plot 78 78 78 Choose type of display output 780 99 780 Command > 7800 99 7800 Executing system command... 7801 99 7801 System shell running... type EXIT to return to CADKEY 7802 99 7802 -- type EXIT to return to CADKEY -- 7803 99 7803 -- press RETURN to continue -- 7804 99 7804 Error - couldn't reallocate scratch memory... CADKEY exited 8 8 8 1 80 99 80 Deleting entities... please wait 81 99 81 . 82 99 82 Enter level to delete entities from => 831 99 831 Indicate 1st window corner 832 99 832 Indicate 2nd window corner 900000 99 900000 Cannot find prompt: %s, press RETURN to continue 900001 99 900001 Cannot find menu: %s, press RETURN to continue 90001 99 90001 / Cursor-indicate position 90002 99 90002 / Select point 90003 99 90003 / Select entity 90004 99 90004 / Select entity 90005 99 90005 / Select 1st entity 900051 99 900051 / Select 2nd entity 90006 99 90006 / Select line 900061 99 900061 Enter distance (%g) => 90007 1005 90007 Indicate polar origin 900071 99 900071 Enter angle (%g) => 900072 99 900072 Enter distance (%g) => 90008 1005 90008 Indicate delta reference position 900081 99 900081 dXV =/dYV =/dZV = 90008101 99 90008101 dXV = 900082 99 900082 dX =/dY =/dZ = 90008201 99 90008201 dX= 900083 99 900083 dXC =/dYC =/dZC = 90008301 99 90008301 dXC= 90009 99 90009 / XV = 9000902 99 9000902 XT =/YT =/ZT = 9000903 99 9000903 X-CURSOR =/Y-CURSOR = 900091 99 900091 / YV = 900092 99 900092 / ZV = 90010 99 90010 / X = 900101 99 900101 / Y = 900102 99 900102 / Z = 90011 99 90011 / XC = 900111 99 900111 / YC = 900112 99 900112 / ZC = 9010 2000 9010 Drive write protected 9011 2000 9011 Drive not ready 9012 2000 9012 Printer out of paper 9013 2000 9013 Drive I/O error 9014 2000 9014 System error 9015 99 9015 Math error %s in %s - continuing 9016 99 9016 Math error %s in %s ... press RETURN 9017 99 9017 DB error, cannot open file: %s, press RETURN to exit 9018 99 9018 DB error, cannot find file: %s, press RETURN to exit 9019 99 9019 Insert disk with %s in default drive... press RETURN when ready 9020 99 9020 %s:%s, press RETURN to continue 9021 99 9021 Could not free memory for system commands... press RETURN 9022 99 9022 Caught signal: %s... press RETURN 910 990 910 Save part before terminating ? (%s) 911 99 911 *** CADKEY program exited *** 990 991 990 1 991 99 991 Select entity %d (press RETURN when done) 9915 9915 9915 Choose method for defining selection plane 991511 1001 991511 Indicate 1st pt on X axis 991512 1001 991512 Indicate 2nd pt on X axis 991513 1001 991513 Indicate direction for Y axis 991521 1001 991521 Indicate direction for Y axis 991522 99 991522 Select line indicating X axis 991531 99 991531 991522 9915311 99 9915311 Select line indicating Y axis 991541 99 991541 Enter view number from 1-%d => 991542 9916 991542 Choose option for setting depth 991543 1006 991543 Indicate position at new depth 991544 99 991544 Enter new depth (current=%lf) => 991550 99 991550 Select a line, arc, or 2-d spline 991560 990 991560 Accept this plane ? (%s) 992 99 992 Indicate position for 1st selection window corner 993 99 993 Indicate position for 2nd selection window corner 994 995 994 Choose option for masking 9941 9951 9941 Choose item(s) to mask on (current = %s) 9942 9952 9942 9941 9943 99 9943 Choose color(s) to mask on (press RETURN when complete) 9944 99 9944 Choose line type(s) to mask on (press RETURN when complete) 9945 99 9945 Enter line width(s) to mask on (press RETURN when complete) 9946 99 9946 Enter pen number(s) to mask on (current = %s) => 9947 99 9947 Enter level number or 0 for no mask (current = %d) => 995 995 995 Choose option for masking 9951 9951 9951 Choose item(s) to mask on (current = %s) 9952 9952 9952 9951 9953 99 9953 Choose color(s) to mask on (press RETURN when complete) 9954 99 9954 Choose line type(s) to mask on (press RETURN when complete) 9955 99 9955 Enter line width(s) to mask on (press RETURN when complete) 9956 99 9956 Enter pen number(s) to mask on (current = %s) => 9957 99 9957 Enter level number or 0 for no mask (current = %d) => 996 99 996 Selection in progress... 9970 9970 9970 Choose view definition method 99700 99700 99700 Choose view definition method 99701 99701 99701 Choose rotation direction(s) 997010 99 997010 Enter rotation angle => 997020 1001 997020 Indicate 1st pt on X axis 997021 1001 997021 Indicate 2nd pt on X axis 997022 1001 997022 Indicate direction for Y axis 99703 99 99703 Hold cursor button down in arrow box, press CR to accept 99704 1001 99704 Indicate rotation center 9971 99 9971 Cursor-indicate primary viewport 9972 99 9972 Saving view... 998 998 998 Choose option for entity masking 9980 99 9980 Indicate viewport to select all entities in 9990 99 9990 Selecting entities... 9991 99 9991 Searching for closest entity... 9992 99 9992 Select start entity in chain 9993 99 9993 Select termination entity in chain or press RETURN 9995 990 9995 Selection OK ? 9996 99 9996 Cursor-indicate chaining direction 9997 9914 9997 Choose group selection option 99971 99 99971 Cursor-select group 999710 99 999710 Searching for closest grouped entity to the cursor 999711 99 999711 Group not found... press RETURN to continue 99972 99 99972 Enter group name (%s): 999720 99 999720 2510 999721 99 999721 A group named %s doesn't exist... press RETURN 999722 997 999722 Entity belongs to a group - choose selection option (%s) 999723 990 999723 Group entities ? (%s) 999724 990 999724 Group already exists... create subgroup #%d ? 999750 99 999750 Saving graphics display image... please wait 999751 99 999751 Restoring graphics display image... please wait 9998 9915 9998 Choose method for defining construction plane 100001 99 100001 80 100004 99 100004 CALC> 100005 99 100005 511 100011 99 100011 Generating macro dump file...please wait 100012 99 100012 Page Dn 100013 99 100013 Page Up 100014 99 100014 Quit 100015 99 100015 Page: