home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / net / ipv4 / ipvs / Kconfig next >
Encoding:
Text File  |  2006-08-11  |  9.3 KB  |  245 lines

  1. #
  2. # IP Virtual Server configuration
  3. #
  4. menu    "IP: Virtual Server Configuration"
  5.     depends on NETFILTER
  6.  
  7. config    IP_VS
  8.     tristate "IP virtual server support (EXPERIMENTAL)"
  9.     depends on NETFILTER
  10.     ---help---
  11.       IP Virtual Server support will let you build a high-performance
  12.       virtual server based on cluster of two or more real servers. This
  13.       option must be enabled for at least one of the clustered computers
  14.       that will take care of intercepting incoming connections to a
  15.       single IP address and scheduling them to real servers.
  16.  
  17.       Three request dispatching techniques are implemented, they are
  18.       virtual server via NAT, virtual server via tunneling and virtual
  19.       server via direct routing. The several scheduling algorithms can
  20.       be used to choose which server the connection is directed to,
  21.       thus load balancing can be achieved among the servers.  For more
  22.       information and its administration program, please visit the
  23.       following URL: <http://www.linuxvirtualserver.org/>.
  24.  
  25.       If you want to compile it in kernel, say Y. To compile it as a
  26.       module, choose M here. If unsure, say N.
  27.  
  28. config    IP_VS_DEBUG
  29.     bool "IP virtual server debugging"
  30.     depends on IP_VS
  31.     ---help---
  32.       Say Y here if you want to get additional messages useful in
  33.       debugging the IP virtual server code. You can change the debug
  34.       level in /proc/sys/net/ipv4/vs/debug_level
  35.  
  36. config    IP_VS_TAB_BITS
  37.     int "IPVS connection table size (the Nth power of 2)"
  38.     depends on IP_VS 
  39.     default "12" 
  40.     ---help---
  41.       The IPVS connection hash table uses the chaining scheme to handle
  42.       hash collisions. Using a big IPVS connection hash table will greatly
  43.       reduce conflicts when there are hundreds of thousands of connections
  44.       in the hash table.
  45.  
  46.       Note the table size must be power of 2. The table size will be the
  47.       value of 2 to the your input number power. The number to choose is
  48.       from 8 to 20, the default number is 12, which means the table size
  49.       is 4096. Don't input the number too small, otherwise you will lose
  50.       performance on it. You can adapt the table size yourself, according
  51.       to your virtual server application. It is good to set the table size
  52.       not far less than the number of connections per second multiplying
  53.       average lasting time of connection in the table.  For example, your
  54.       virtual server gets 200 connections per second, the connection lasts
  55.       for 200 seconds in average in the connection table, the table size
  56.       should be not far less than 200x200, it is good to set the table
  57.       size 32768 (2**15).
  58.  
  59.       Another note that each connection occupies 128 bytes effectively and
  60.       each hash entry uses 8 bytes, so you can estimate how much memory is
  61.       needed for your box.
  62.  
  63. comment "IPVS transport protocol load balancing support"
  64.         depends on IP_VS
  65.  
  66. config    IP_VS_PROTO_TCP
  67.     bool "TCP load balancing support"
  68.     depends on IP_VS
  69.     ---help---
  70.       This option enables support for load balancing TCP transport
  71.       protocol. Say Y if unsure.
  72.  
  73. config    IP_VS_PROTO_UDP
  74.     bool "UDP load balancing support"
  75.     depends on IP_VS
  76.     ---help---
  77.       This option enables support for load balancing UDP transport
  78.       protocol. Say Y if unsure.
  79.  
  80. config    IP_VS_PROTO_ESP
  81.     bool "ESP load balancing support"
  82.     depends on IP_VS
  83.     ---help---
  84.       This option enables support for load balancing ESP (Encapsultion
  85.       Security Payload) transport protocol. Say Y if unsure.
  86.  
  87. config    IP_VS_PROTO_AH
  88.     bool "AH load balancing support"
  89.     depends on IP_VS
  90.     ---help---
  91.       This option enables support for load balancing AH (Authentication
  92.       Header) transport protocol. Say Y if unsure.
  93.  
  94. comment "IPVS scheduler"
  95.         depends on IP_VS
  96.  
  97. config    IP_VS_RR
  98.     tristate "round-robin scheduling"
  99.     depends on IP_VS
  100.     ---help---
  101.       The robin-robin scheduling algorithm simply directs network
  102.       connections to different real servers in a round-robin manner.
  103.  
  104.       If you want to compile it in kernel, say Y. To compile it as a
  105.       module, choose M here. If unsure, say N.
  106.  
  107. config    IP_VS_WRR
  108.         tristate "weighted round-robin scheduling" 
  109.     depends on IP_VS
  110.     ---help---
  111.       The weighted robin-robin scheduling algorithm directs network
  112.       connections to different real servers based on server weights
  113.       in a round-robin manner. Servers with higher weights receive
  114.       new connections first than those with less weights, and servers
  115.       with higher weights get more connections than those with less
  116.       weights and servers with equal weights get equal connections.
  117.  
  118.       If you want to compile it in kernel, say Y. To compile it as a
  119.       module, choose M here. If unsure, say N.
  120.  
  121. config    IP_VS_LC
  122.         tristate "least-connection scheduling"
  123.         depends on IP_VS
  124.     ---help---
  125.       The least-connection scheduling algorithm directs network
  126.       connections to the server with the least number of active 
  127.       connections.
  128.  
  129.       If you want to compile it in kernel, say Y. To compile it as a
  130.       module, choose M here. If unsure, say N.
  131.  
  132. config    IP_VS_WLC
  133.         tristate "weighted least-connection scheduling"
  134.         depends on IP_VS
  135.     ---help---
  136.       The weighted least-connection scheduling algorithm directs network
  137.       connections to the server with the least active connections
  138.       normalized by the server weight.
  139.  
  140.       If you want to compile it in kernel, say Y. To compile it as a
  141.       module, choose M here. If unsure, say N.
  142.  
  143. config    IP_VS_LBLC
  144.     tristate "locality-based least-connection scheduling"
  145.         depends on IP_VS
  146.     ---help---
  147.       The locality-based least-connection scheduling algorithm is for
  148.       destination IP load balancing. It is usually used in cache cluster.
  149.       This algorithm usually directs packet destined for an IP address to
  150.       its server if the server is alive and under load. If the server is
  151.       overloaded (its active connection numbers is larger than its weight)
  152.       and there is a server in its half load, then allocate the weighted
  153.       least-connection server to this IP address.
  154.  
  155.       If you want to compile it in kernel, say Y. To compile it as a
  156.       module, choose M here. If unsure, say N.
  157.  
  158. config  IP_VS_LBLCR
  159.     tristate "locality-based least-connection with replication scheduling"
  160.         depends on IP_VS
  161.     ---help---
  162.       The locality-based least-connection with replication scheduling
  163.       algorithm is also for destination IP load balancing. It is 
  164.       usually used in cache cluster. It differs from the LBLC scheduling
  165.       as follows: the load balancer maintains mappings from a target
  166.       to a set of server nodes that can serve the target. Requests for
  167.       a target are assigned to the least-connection node in the target's
  168.       server set. If all the node in the server set are over loaded,
  169.       it picks up a least-connection node in the cluster and adds it
  170.       in the sever set for the target. If the server set has not been
  171.       modified for the specified time, the most loaded node is removed
  172.       from the server set, in order to avoid high degree of replication.
  173.  
  174.       If you want to compile it in kernel, say Y. To compile it as a
  175.       module, choose M here. If unsure, say N.
  176.  
  177. config    IP_VS_DH
  178.     tristate "destination hashing scheduling"
  179.         depends on IP_VS
  180.     ---help---
  181.       The destination hashing scheduling algorithm assigns network
  182.       connections to the servers through looking up a statically assigned
  183.       hash table by their destination IP addresses.
  184.  
  185.       If you want to compile it in kernel, say Y. To compile it as a
  186.       module, choose M here. If unsure, say N.
  187.  
  188. config    IP_VS_SH
  189.     tristate "source hashing scheduling"
  190.         depends on IP_VS
  191.     ---help---
  192.       The source hashing scheduling algorithm assigns network
  193.       connections to the servers through looking up a statically assigned
  194.       hash table by their source IP addresses.
  195.  
  196.       If you want to compile it in kernel, say Y. To compile it as a
  197.       module, choose M here. If unsure, say N.
  198.  
  199. config    IP_VS_SED
  200.     tristate "shortest expected delay scheduling"
  201.         depends on IP_VS
  202.     ---help---
  203.       The shortest expected delay scheduling algorithm assigns network
  204.       connections to the server with the shortest expected delay. The 
  205.       expected delay that the job will experience is (Ci + 1) / Ui if 
  206.       sent to the ith server, in which Ci is the number of connections
  207.       on the the ith server and Ui is the fixed service rate (weight)
  208.       of the ith server.
  209.  
  210.       If you want to compile it in kernel, say Y. To compile it as a
  211.       module, choose M here. If unsure, say N.
  212.  
  213. config    IP_VS_NQ
  214.     tristate "never queue scheduling"
  215.         depends on IP_VS
  216.     ---help---
  217.       The never queue scheduling algorithm adopts a two-speed model.
  218.       When there is an idle server available, the job will be sent to
  219.       the idle server, instead of waiting for a fast one. When there
  220.       is no idle server available, the job will be sent to the server
  221.       that minimize its expected delay (The Shortest Expected Delay
  222.       scheduling algorithm).
  223.  
  224.       If you want to compile it in kernel, say Y. To compile it as a
  225.       module, choose M here. If unsure, say N.
  226.  
  227. comment 'IPVS application helper'
  228.     depends on IP_VS
  229.  
  230. config    IP_VS_FTP
  231.       tristate "FTP protocol helper"
  232.         depends on IP_VS && IP_VS_PROTO_TCP
  233.     ---help---
  234.       FTP is a protocol that transfers IP address and/or port number in
  235.       the payload. In the virtual server via Network Address Translation,
  236.       the IP address and port number of real servers cannot be sent to
  237.       clients in ftp connections directly, so FTP protocol helper is
  238.       required for tracking the connection and mangling it back to that of
  239.       virtual service.
  240.  
  241.       If you want to compile it in kernel, say Y. To compile it as a
  242.       module, choose M here. If unsure, say N.
  243.  
  244. endmenu
  245.