home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / include / asm-x86_64 / io.h < prev    next >
Encoding:
C/C++ Source or Header  |  2006-08-11  |  8.3 KB  |  309 lines

  1. #ifndef _ASM_IO_H
  2. #define _ASM_IO_H
  3.  
  4.  
  5. /*
  6.  * This file contains the definitions for the x86 IO instructions
  7.  * inb/inw/inl/outb/outw/outl and the "string versions" of the same
  8.  * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
  9.  * versions of the single-IO instructions (inb_p/inw_p/..).
  10.  *
  11.  * This file is not meant to be obfuscating: it's just complicated
  12.  * to (a) handle it all in a way that makes gcc able to optimize it
  13.  * as well as possible and (b) trying to avoid writing the same thing
  14.  * over and over again with slight variations and possibly making a
  15.  * mistake somewhere.
  16.  */
  17.  
  18. /*
  19.  * Thanks to James van Artsdalen for a better timing-fix than
  20.  * the two short jumps: using outb's to a nonexistent port seems
  21.  * to guarantee better timings even on fast machines.
  22.  *
  23.  * On the other hand, I'd like to be sure of a non-existent port:
  24.  * I feel a bit unsafe about using 0x80 (should be safe, though)
  25.  *
  26.  *        Linus
  27.  */
  28.  
  29.  /*
  30.   *  Bit simplified and optimized by Jan Hubicka
  31.   *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
  32.   *
  33.   *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
  34.   *  isa_read[wl] and isa_write[wl] fixed
  35.   *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  36.   */
  37.  
  38. #define __SLOW_DOWN_IO "\noutb %%al,$0x80"
  39.  
  40. #ifdef REALLY_SLOW_IO
  41. #define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
  42. #else
  43. #define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
  44. #endif
  45.  
  46. /*
  47.  * Talk about misusing macros..
  48.  */
  49. #define __OUT1(s,x) \
  50. static inline void out##s(unsigned x value, unsigned short port) {
  51.  
  52. #define __OUT2(s,s1,s2) \
  53. __asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
  54.  
  55. #define __OUT(s,s1,x) \
  56. __OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
  57. __OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \
  58.  
  59. #define __IN1(s) \
  60. static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
  61.  
  62. #define __IN2(s,s1,s2) \
  63. __asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
  64.  
  65. #define __IN(s,s1,i...) \
  66. __IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
  67. __IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
  68.  
  69. #define __INS(s) \
  70. static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
  71. { __asm__ __volatile__ ("rep ; ins" #s \
  72. : "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
  73.  
  74. #define __OUTS(s) \
  75. static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
  76. { __asm__ __volatile__ ("rep ; outs" #s \
  77. : "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
  78.  
  79. #define RETURN_TYPE unsigned char
  80. __IN(b,"")
  81. #undef RETURN_TYPE
  82. #define RETURN_TYPE unsigned short
  83. __IN(w,"")
  84. #undef RETURN_TYPE
  85. #define RETURN_TYPE unsigned int
  86. __IN(l,"")
  87. #undef RETURN_TYPE
  88.  
  89. __OUT(b,"b",char)
  90. __OUT(w,"w",short)
  91. __OUT(l,,int)
  92.  
  93. __INS(b)
  94. __INS(w)
  95. __INS(l)
  96.  
  97. __OUTS(b)
  98. __OUTS(w)
  99. __OUTS(l)
  100.  
  101. #define IO_SPACE_LIMIT 0xffff
  102.  
  103. #if defined(__KERNEL__) && __x86_64__
  104.  
  105. #include <linux/vmalloc.h>
  106.  
  107. #ifndef __i386__
  108. /*
  109.  * Change virtual addresses to physical addresses and vv.
  110.  * These are pretty trivial
  111.  */
  112. static inline unsigned long virt_to_phys(volatile void * address)
  113. {
  114.     return __pa(address);
  115. }
  116.  
  117. static inline void * phys_to_virt(unsigned long address)
  118. {
  119.     return __va(address);
  120. }
  121. #endif
  122.  
  123. /*
  124.  * Change "struct page" to physical address.
  125.  */
  126. #define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
  127.  
  128. #include <asm-generic/iomap.h>
  129.  
  130. extern void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags);
  131.  
  132. static inline void __iomem * ioremap (unsigned long offset, unsigned long size)
  133. {
  134.     return __ioremap(offset, size, 0);
  135. }
  136.  
  137. extern void *early_ioremap(unsigned long addr, unsigned long size);
  138. extern void early_iounmap(void *addr, unsigned long size);
  139.  
  140. /*
  141.  * This one maps high address device memory and turns off caching for that area.
  142.  * it's useful if some control registers are in such an area and write combining
  143.  * or read caching is not desirable:
  144.  */
  145. extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
  146. extern void iounmap(volatile void __iomem *addr);
  147.  
  148. /*
  149.  * ISA I/O bus memory addresses are 1:1 with the physical address.
  150.  */
  151. #define isa_virt_to_bus virt_to_phys
  152. #define isa_page_to_bus page_to_phys
  153. #define isa_bus_to_virt phys_to_virt
  154.  
  155. /*
  156.  * However PCI ones are not necessarily 1:1 and therefore these interfaces
  157.  * are forbidden in portable PCI drivers.
  158.  *
  159.  * Allow them on x86 for legacy drivers, though.
  160.  */
  161. #define virt_to_bus virt_to_phys
  162. #define bus_to_virt phys_to_virt
  163.  
  164. /*
  165.  * readX/writeX() are used to access memory mapped devices. On some
  166.  * architectures the memory mapped IO stuff needs to be accessed
  167.  * differently. On the x86 architecture, we just read/write the
  168.  * memory location directly.
  169.  */
  170.  
  171. static inline __u8 __readb(const volatile void __iomem *addr)
  172. {
  173.     return *(__force volatile __u8 *)addr;
  174. }
  175. static inline __u16 __readw(const volatile void __iomem *addr)
  176. {
  177.     return *(__force volatile __u16 *)addr;
  178. }
  179. static __always_inline __u32 __readl(const volatile void __iomem *addr)
  180. {
  181.     return *(__force volatile __u32 *)addr;
  182. }
  183. static inline __u64 __readq(const volatile void __iomem *addr)
  184. {
  185.     return *(__force volatile __u64 *)addr;
  186. }
  187. #define readb(x) __readb(x)
  188. #define readw(x) __readw(x)
  189. #define readl(x) __readl(x)
  190. #define readq(x) __readq(x)
  191. #define readb_relaxed(a) readb(a)
  192. #define readw_relaxed(a) readw(a)
  193. #define readl_relaxed(a) readl(a)
  194. #define readq_relaxed(a) readq(a)
  195. #define __raw_readb readb
  196. #define __raw_readw readw
  197. #define __raw_readl readl
  198. #define __raw_readq readq
  199.  
  200. #define mmiowb()
  201.  
  202. static inline void __writel(__u32 b, volatile void __iomem *addr)
  203. {
  204.     *(__force volatile __u32 *)addr = b;
  205. }
  206. static inline void __writeq(__u64 b, volatile void __iomem *addr)
  207. {
  208.     *(__force volatile __u64 *)addr = b;
  209. }
  210. static inline void __writeb(__u8 b, volatile void __iomem *addr)
  211. {
  212.     *(__force volatile __u8 *)addr = b;
  213. }
  214. static inline void __writew(__u16 b, volatile void __iomem *addr)
  215. {
  216.     *(__force volatile __u16 *)addr = b;
  217. }
  218. #define writeq(val,addr) __writeq((val),(addr))
  219. #define writel(val,addr) __writel((val),(addr))
  220. #define writew(val,addr) __writew((val),(addr))
  221. #define writeb(val,addr) __writeb((val),(addr))
  222. #define __raw_writeb writeb
  223. #define __raw_writew writew
  224. #define __raw_writel writel
  225. #define __raw_writeq writeq
  226.  
  227. void __memcpy_fromio(void*,unsigned long,unsigned);
  228. void __memcpy_toio(unsigned long,const void*,unsigned);
  229.  
  230. static inline void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
  231. {
  232.     __memcpy_fromio(to,(unsigned long)from,len);
  233. }
  234. static inline void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
  235. {
  236.     __memcpy_toio((unsigned long)to,from,len);
  237. }
  238.  
  239. void memset_io(volatile void __iomem *a, int b, size_t c);
  240.  
  241. /*
  242.  * ISA space is 'always mapped' on a typical x86 system, no need to
  243.  * explicitly ioremap() it. The fact that the ISA IO space is mapped
  244.  * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
  245.  * are physical addresses. The following constant pointer can be
  246.  * used as the IO-area pointer (it can be iounmapped as well, so the
  247.  * analogy with PCI is quite large):
  248.  */
  249. #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
  250.  
  251. /*
  252.  * Again, x86-64 does not require mem IO specific function.
  253.  */
  254.  
  255. #define eth_io_copy_and_sum(a,b,c,d)        eth_copy_and_sum((a),(void *)(b),(c),(d))
  256.  
  257. /**
  258.  *    check_signature        -    find BIOS signatures
  259.  *    @io_addr: mmio address to check 
  260.  *    @signature:  signature block
  261.  *    @length: length of signature
  262.  *
  263.  *    Perform a signature comparison with the mmio address io_addr. This
  264.  *    address should have been obtained by ioremap.
  265.  *    Returns 1 on a match.
  266.  */
  267.  
  268. static inline int check_signature(void __iomem *io_addr,
  269.     const unsigned char *signature, int length)
  270. {
  271.     int retval = 0;
  272.     do {
  273.         if (readb(io_addr) != *signature)
  274.             goto out;
  275.         io_addr++;
  276.         signature++;
  277.         length--;
  278.     } while (length);
  279.     retval = 1;
  280. out:
  281.     return retval;
  282. }
  283.  
  284. /* Nothing to do */
  285.  
  286. #define dma_cache_inv(_start,_size)        do { } while (0)
  287. #define dma_cache_wback(_start,_size)        do { } while (0)
  288. #define dma_cache_wback_inv(_start,_size)    do { } while (0)
  289.  
  290. #define flush_write_buffers() 
  291.  
  292. extern int iommu_bio_merge;
  293. #define BIO_VMERGE_BOUNDARY iommu_bio_merge
  294.  
  295. /*
  296.  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  297.  * access
  298.  */
  299. #define xlate_dev_mem_ptr(p)    __va(p)
  300.  
  301. /*
  302.  * Convert a virtual cached pointer to an uncached pointer
  303.  */
  304. #define xlate_dev_kmem_ptr(p)    p
  305.  
  306. #endif /* __KERNEL__ */
  307.  
  308. #endif
  309.