home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / include / asm-sparc / auxio.h < prev    next >
Encoding:
C/C++ Source or Header  |  2006-08-11  |  2.6 KB  |  90 lines

  1. /* $Id: auxio.h,v 1.18 1997/11/07 15:01:45 jj Exp $
  2.  * auxio.h:  Definitions and code for the Auxiliary I/O register.
  3.  *
  4.  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
  5.  */
  6. #ifndef _SPARC_AUXIO_H
  7. #define _SPARC_AUXIO_H
  8.  
  9. #include <asm/system.h>
  10. #include <asm/vaddrs.h>
  11.  
  12. /* This register is an unsigned char in IO space.  It does two things.
  13.  * First, it is used to control the front panel LED light on machines
  14.  * that have it (good for testing entry points to trap handlers and irq's)
  15.  * Secondly, it controls various floppy drive parameters.
  16.  */
  17. #define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
  18. #define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
  19. #define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
  20. #define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
  21. #define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
  22. #define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
  23. #define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
  24.  
  25. /* Set the following to one, then zero, after doing a pseudo DMA transfer. */
  26. #define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
  27.  
  28. /* Set the following to zero to eject the floppy. */
  29. #define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
  30. #define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
  31.  
  32. #ifndef __ASSEMBLY__
  33.  
  34. /* 
  35.  * NOTE: these routines are implementation dependent-- 
  36.  * understand the hardware you are querying! 
  37.  */
  38. extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
  39. extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
  40.  
  41. /*
  42.  * The following routines are provided for driver-compatibility
  43.  * with sparc64 (primarily sunlance.c)
  44.  */
  45.  
  46. #define AUXIO_LTE_ON    1
  47. #define AUXIO_LTE_OFF   0
  48.  
  49. /* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
  50.  *
  51.  * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
  52.  */
  53. #define auxio_set_lte(on) \
  54. do { \
  55.     if(on) { \
  56.         set_auxio(AUXIO_LINK_TEST, 0); \
  57.     } else { \
  58.         set_auxio(0, AUXIO_LINK_TEST); \
  59.     } \
  60. } while (0)
  61.  
  62. #define AUXIO_LED_ON    1
  63. #define AUXIO_LED_OFF   0
  64.  
  65. /* auxio_set_led - Set system front panel LED
  66.  *
  67.  * on - AUXIO_LED_ON or AUXIO_LED_OFF
  68.  */
  69. #define auxio_set_led(on) \
  70. do { \
  71.     if(on) { \
  72.         set_auxio(AUXIO_LED, 0); \
  73.     } else { \
  74.         set_auxio(0, AUXIO_LED); \
  75.     } \
  76. } while (0)
  77.  
  78. #endif /* !(__ASSEMBLY__) */
  79.  
  80.  
  81. /* AUXIO2 (Power Off Control) */
  82. extern __volatile__ unsigned char * auxio_power_register;
  83.  
  84. #define    AUXIO_POWER_DETECT_FAILURE    32
  85. #define    AUXIO_POWER_CLEAR_FAILURE    2
  86. #define    AUXIO_POWER_OFF            1
  87.  
  88.  
  89. #endif /* !(_SPARC_AUXIO_H) */
  90.