home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / include / asm-powerpc / hvcall.h < prev    next >
Encoding:
C/C++ Source or Header  |  2006-08-11  |  9.2 KB  |  289 lines

  1. #ifndef _ASM_POWERPC_HVCALL_H
  2. #define _ASM_POWERPC_HVCALL_H
  3. #ifdef __KERNEL__
  4.  
  5. #define HVSC            .long 0x44000022
  6.  
  7. #define H_SUCCESS    0
  8. #define H_BUSY        1    /* Hardware busy -- retry later */
  9. #define H_CLOSED    2    /* Resource closed */
  10. #define H_NOT_AVAILABLE 3
  11. #define H_CONSTRAINED    4    /* Resource request constrained to max allowed */
  12. #define H_PARTIAL       5
  13. #define H_IN_PROGRESS    14    /* Kind of like busy */
  14. #define H_PAGE_REGISTERED 15
  15. #define H_PARTIAL_STORE   16
  16. #define H_PENDING    17    /* returned from H_POLL_PENDING */
  17. #define H_CONTINUE    18    /* Returned from H_Join on success */
  18. #define H_LONG_BUSY_START_RANGE        9900  /* Start of long busy range */
  19. #define H_LONG_BUSY_ORDER_1_MSEC    9900  /* Long busy, hint that 1msec \
  20.                          is a good time to retry */
  21. #define H_LONG_BUSY_ORDER_10_MSEC    9901  /* Long busy, hint that 10msec \
  22.                          is a good time to retry */
  23. #define H_LONG_BUSY_ORDER_100_MSEC     9902  /* Long busy, hint that 100msec \
  24.                          is a good time to retry */
  25. #define H_LONG_BUSY_ORDER_1_SEC        9903  /* Long busy, hint that 1sec \
  26.                          is a good time to retry */
  27. #define H_LONG_BUSY_ORDER_10_SEC    9904  /* Long busy, hint that 10sec \
  28.                          is a good time to retry */
  29. #define H_LONG_BUSY_ORDER_100_SEC    9905  /* Long busy, hint that 100sec \
  30.                          is a good time to retry */
  31. #define H_LONG_BUSY_END_RANGE        9905  /* End of long busy range */
  32. #define H_HARDWARE    -1    /* Hardware error */
  33. #define H_FUNCTION    -2    /* Function not supported */
  34. #define H_PRIVILEGE    -3    /* Caller not privileged */
  35. #define H_PARAMETER    -4    /* Parameter invalid, out-of-range or conflicting */
  36. #define H_BAD_MODE    -5    /* Illegal msr value */
  37. #define H_PTEG_FULL    -6    /* PTEG is full */
  38. #define H_NOT_FOUND    -7    /* PTE was not found" */
  39. #define H_RESERVED_DABR    -8    /* DABR address is reserved by the hypervisor on this processor" */
  40. #define H_NO_MEM    -9
  41. #define H_AUTHORITY    -10
  42. #define H_PERMISSION    -11
  43. #define H_DROPPED    -12
  44. #define H_SOURCE_PARM    -13
  45. #define H_DEST_PARM    -14
  46. #define H_REMOTE_PARM    -15
  47. #define H_RESOURCE    -16
  48. #define H_ADAPTER_PARM  -17
  49. #define H_RH_PARM       -18
  50. #define H_RCQ_PARM      -19
  51. #define H_SCQ_PARM      -20
  52. #define H_EQ_PARM       -21
  53. #define H_RT_PARM       -22
  54. #define H_ST_PARM       -23
  55. #define H_SIGT_PARM     -24
  56. #define H_TOKEN_PARM    -25
  57. #define H_MLENGTH_PARM  -27
  58. #define H_MEM_PARM      -28
  59. #define H_MEM_ACCESS_PARM -29
  60. #define H_ATTR_PARM     -30
  61. #define H_PORT_PARM     -31
  62. #define H_MCG_PARM      -32
  63. #define H_VL_PARM       -33
  64. #define H_TSIZE_PARM    -34
  65. #define H_TRACE_PARM    -35
  66.  
  67. #define H_MASK_PARM     -37
  68. #define H_MCG_FULL      -38
  69. #define H_ALIAS_EXIST   -39
  70. #define H_P_COUNTER     -40
  71. #define H_TABLE_FULL    -41
  72. #define H_ALT_TABLE     -42
  73. #define H_MR_CONDITION  -43
  74. #define H_NOT_ENOUGH_RESOURCES -44
  75. #define H_R_STATE       -45
  76. #define H_RESCINDEND    -46
  77.  
  78.  
  79. /* Long Busy is a condition that can be returned by the firmware
  80.  * when a call cannot be completed now, but the identical call
  81.  * should be retried later.  This prevents calls blocking in the
  82.  * firmware for long periods of time.  Annoyingly the firmware can return
  83.  * a range of return codes, hinting at how long we should wait before
  84.  * retrying.  If you don't care for the hint, the macro below is a good
  85.  * way to check for the long_busy return codes
  86.  */
  87. #define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
  88.                  && (x <= H_LONG_BUSY_END_RANGE))
  89.  
  90. /* Flags */
  91. #define H_LARGE_PAGE        (1UL<<(63-16))
  92. #define H_EXACT            (1UL<<(63-24))    /* Use exact PTE or return H_PTEG_FULL */
  93. #define H_R_XLATE        (1UL<<(63-25))    /* include a valid logical page num in the pte if the valid bit is set */
  94. #define H_READ_4        (1UL<<(63-26))    /* Return 4 PTEs */
  95. #define H_AVPN            (1UL<<(63-32))    /* An avpn is provided as a sanity test */
  96. #define H_ANDCOND        (1UL<<(63-33))
  97. #define H_ICACHE_INVALIDATE    (1UL<<(63-40))    /* icbi, etc.  (ignored for IO pages) */
  98. #define H_ICACHE_SYNCHRONIZE    (1UL<<(63-41))    /* dcbst, icbi, etc (ignored for IO pages */
  99. #define H_ZERO_PAGE        (1UL<<(63-48))    /* zero the page before mapping (ignored for IO pages) */
  100. #define H_COPY_PAGE        (1UL<<(63-49))
  101. #define H_N            (1UL<<(63-61))
  102. #define H_PP1            (1UL<<(63-62))
  103. #define H_PP2            (1UL<<(63-63))
  104.  
  105. /* DABRX flags */
  106. #define H_DABRX_HYPERVISOR    (1UL<<(63-61))
  107. #define H_DABRX_KERNEL        (1UL<<(63-62))
  108. #define H_DABRX_USER        (1UL<<(63-63))
  109.  
  110. /* Each control block has to be on a 4K bondary */
  111. #define H_CB_ALIGNMENT          4096
  112.  
  113. /* pSeries hypervisor opcodes */
  114. #define H_REMOVE        0x04
  115. #define H_ENTER            0x08
  116. #define H_READ            0x0c
  117. #define H_CLEAR_MOD        0x10
  118. #define H_CLEAR_REF        0x14
  119. #define H_PROTECT        0x18
  120. #define H_GET_TCE        0x1c
  121. #define H_PUT_TCE        0x20
  122. #define H_SET_SPRG0        0x24
  123. #define H_SET_DABR        0x28
  124. #define H_PAGE_INIT        0x2c
  125. #define H_SET_ASR        0x30
  126. #define H_ASR_ON        0x34
  127. #define H_ASR_OFF        0x38
  128. #define H_LOGICAL_CI_LOAD    0x3c
  129. #define H_LOGICAL_CI_STORE    0x40
  130. #define H_LOGICAL_CACHE_LOAD    0x44
  131. #define H_LOGICAL_CACHE_STORE    0x48
  132. #define H_LOGICAL_ICBI        0x4c
  133. #define H_LOGICAL_DCBF        0x50
  134. #define H_GET_TERM_CHAR        0x54
  135. #define H_PUT_TERM_CHAR        0x58
  136. #define H_REAL_TO_LOGICAL    0x5c
  137. #define H_HYPERVISOR_DATA    0x60
  138. #define H_EOI            0x64
  139. #define H_CPPR            0x68
  140. #define H_IPI            0x6c
  141. #define H_IPOLL            0x70
  142. #define H_XIRR            0x74
  143. #define H_PERFMON        0x7c
  144. #define H_MIGRATE_DMA        0x78
  145. #define H_REGISTER_VPA        0xDC
  146. #define H_CEDE            0xE0
  147. #define H_CONFER        0xE4
  148. #define H_PROD            0xE8
  149. #define H_GET_PPP        0xEC
  150. #define H_SET_PPP        0xF0
  151. #define H_PURR            0xF4
  152. #define H_PIC            0xF8
  153. #define H_REG_CRQ        0xFC
  154. #define H_FREE_CRQ        0x100
  155. #define H_VIO_SIGNAL        0x104
  156. #define H_SEND_CRQ        0x108
  157. #define H_COPY_RDMA        0x110
  158. #define H_SET_XDABR        0x134
  159. #define H_STUFF_TCE        0x138
  160. #define H_PUT_TCE_INDIRECT    0x13C
  161. #define H_VTERM_PARTNER_INFO    0x150
  162. #define H_REGISTER_VTERM    0x154
  163. #define H_FREE_VTERM        0x158
  164. #define H_RESET_EVENTS          0x15C
  165. #define H_ALLOC_RESOURCE        0x160
  166. #define H_FREE_RESOURCE         0x164
  167. #define H_MODIFY_QP             0x168
  168. #define H_QUERY_QP              0x16C
  169. #define H_REREGISTER_PMR        0x170
  170. #define H_REGISTER_SMR          0x174
  171. #define H_QUERY_MR              0x178
  172. #define H_QUERY_MW              0x17C
  173. #define H_QUERY_HCA             0x180
  174. #define H_QUERY_PORT            0x184
  175. #define H_MODIFY_PORT           0x188
  176. #define H_DEFINE_AQP1           0x18C
  177. #define H_GET_TRACE_BUFFER      0x190
  178. #define H_DEFINE_AQP0           0x194
  179. #define H_RESIZE_MR             0x198
  180. #define H_ATTACH_MCQP           0x19C
  181. #define H_DETACH_MCQP           0x1A0
  182. #define H_CREATE_RPT            0x1A4
  183. #define H_REMOVE_RPT            0x1A8
  184. #define H_REGISTER_RPAGES       0x1AC
  185. #define H_DISABLE_AND_GETC      0x1B0
  186. #define H_ERROR_DATA            0x1B4
  187. #define H_GET_HCA_INFO          0x1B8
  188. #define H_GET_PERF_COUNT        0x1BC
  189. #define H_MANAGE_TRACE          0x1C0
  190. #define H_QUERY_INT_STATE       0x1E4
  191. #define H_POLL_PENDING        0x1D8
  192. #define H_JOIN            0x298
  193. #define H_ENABLE_CRQ        0x2B0
  194.  
  195. #ifndef __ASSEMBLY__
  196.  
  197. /* plpar_hcall() -- Generic call interface using above opcodes
  198.  *
  199.  * The actual call interface is a hypervisor call instruction with
  200.  * the opcode in R3 and input args in R4-R7.
  201.  * Status is returned in R3 with variable output values in R4-R11.
  202.  * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
  203.  * and return only two out args which MUST ALWAYS BE PROVIDED.
  204.  */
  205. long plpar_hcall(unsigned long opcode,
  206.          unsigned long arg1,
  207.          unsigned long arg2,
  208.          unsigned long arg3,
  209.          unsigned long arg4,
  210.          unsigned long *out1,
  211.          unsigned long *out2,
  212.          unsigned long *out3);
  213.  
  214. /* Same as plpar_hcall but for those opcodes that return no values
  215.  * other than status.  Slightly more efficient.
  216.  */
  217. long plpar_hcall_norets(unsigned long opcode, ...);
  218.  
  219. /*
  220.  * Special hcall interface for ibmveth support.
  221.  * Takes 8 input parms. Returns a rc and stores the
  222.  * R4 return value in *out1.
  223.  */
  224. long plpar_hcall_8arg_2ret(unsigned long opcode,
  225.                unsigned long arg1,
  226.                unsigned long arg2,
  227.                unsigned long arg3,
  228.                unsigned long arg4,
  229.                unsigned long arg5,
  230.                unsigned long arg6,
  231.                unsigned long arg7,
  232.                unsigned long arg8,
  233.                unsigned long *out1);
  234.  
  235. /* plpar_hcall_4out()
  236.  *
  237.  * same as plpar_hcall except with 4 output arguments.
  238.  *
  239.  */
  240. long plpar_hcall_4out(unsigned long opcode,
  241.               unsigned long arg1,
  242.               unsigned long arg2,
  243.               unsigned long arg3,
  244.               unsigned long arg4,
  245.               unsigned long *out1,
  246.               unsigned long *out2,
  247.               unsigned long *out3,
  248.               unsigned long *out4);
  249.  
  250. long plpar_hcall_7arg_7ret(unsigned long opcode,
  251.                unsigned long arg1,
  252.                unsigned long arg2,
  253.                unsigned long arg3,
  254.                unsigned long arg4,
  255.                unsigned long arg5,
  256.                unsigned long arg6,
  257.                unsigned long arg7,
  258.                unsigned long *out1,
  259.                unsigned long *out2,
  260.                unsigned long *out3,
  261.                unsigned long *out4,
  262.                unsigned long *out5,
  263.                unsigned long *out6,
  264.                unsigned long *out7);
  265.  
  266. long plpar_hcall_9arg_9ret(unsigned long opcode,
  267.                unsigned long arg1,
  268.                unsigned long arg2,
  269.                unsigned long arg3,
  270.                unsigned long arg4,
  271.                unsigned long arg5,
  272.                unsigned long arg6,
  273.                unsigned long arg7,
  274.                unsigned long arg8,
  275.                unsigned long arg9,
  276.                unsigned long *out1,
  277.                unsigned long *out2,
  278.                unsigned long *out3,
  279.                unsigned long *out4,
  280.                unsigned long *out5,
  281.                unsigned long *out6,
  282.                unsigned long *out7,
  283.                unsigned long *out8,
  284.                unsigned long *out9);
  285.  
  286. #endif /* __ASSEMBLY__ */
  287. #endif /* __KERNEL__ */
  288. #endif /* _ASM_POWERPC_HVCALL_H */
  289.