home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / drivers / s390 / net / Kconfig next >
Encoding:
Text File  |  2006-08-11  |  3.8 KB  |  109 lines

  1. menu "S/390 network device drivers"
  2.     depends on NETDEVICES && S390
  3.  
  4. config LCS
  5.     tristate "Lan Channel Station Interface"
  6.     depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
  7.     help
  8.        Select this option if you want to use LCS networking  on IBM S/390
  9.          or zSeries. This device driver supports Token Ring (IEEE 802.5),
  10.          FDDI (IEEE 802.7) and Ethernet. 
  11.        This option is also available as a module which will be
  12.        called lcs.ko. If you do not know what it is, it's safe to say "Y".
  13.  
  14. config CTC
  15.     tristate "CTC device support"
  16.     depends on NETDEVICES
  17.     help
  18.       Select this option if you want to use channel-to-channel networking
  19.       on IBM S/390 or zSeries. This device driver supports real CTC
  20.       coupling using ESCON. It also supports virtual CTCs when running
  21.       under VM. It will use the channel device configuration if this is
  22.       available.  This option is also available as a module which will be
  23.       called ctc.ko.  If you do not know what it is, it's safe to say "Y".
  24.  
  25. config IUCV
  26.     tristate "IUCV support (VM only)"
  27.     help
  28.       Select this option if you want to use inter-user communication
  29.       under VM or VIF. If unsure, say "Y" to enable a fast communication
  30.       link between VM guests. At boot time the user ID of the guest needs
  31.       to be passed to the kernel. Note that both kernels need to be
  32.       compiled with this option and both need to be booted with the user ID
  33.       of the other VM guest.
  34.  
  35. config NETIUCV
  36.     tristate "IUCV network device support (VM only)"
  37.     depends on IUCV && NETDEVICES
  38.     help
  39.       Select this option if you want to use inter-user communication
  40.       vehicle networking under VM or VIF. It enables a fast communication
  41.       link between VM guests. Using ifconfig a point-to-point connection
  42.       can be established to the Linux for zSeries and S7390 system
  43.       running on the other VM guest. This option is also available
  44.       as a module which will be called netiucv.ko. If unsure, say "Y".
  45.  
  46. config SMSGIUCV
  47.     tristate "IUCV special message support (VM only)"
  48.     depends on IUCV
  49.     help
  50.       Select this option if you want to be able to receive SMSG messages
  51.       from other VM guest systems.
  52.  
  53. config CLAW
  54.     tristate "CLAW device support"
  55.     depends on NETDEVICES
  56.     help
  57.       This driver supports channel attached CLAW devices.
  58.       CLAW is Common Link Access for Workstation.  Common devices
  59.           that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
  60.       To compile as a module choose M here:  The module will be called
  61.       claw.ko to compile into the kernel choose Y
  62.  
  63. config QETH
  64.     tristate "Gigabit Ethernet device support"
  65.     depends on NETDEVICES && IP_MULTICAST && QDIO
  66.     help
  67.       This driver supports the IBM S/390 and zSeries OSA Express adapters
  68.       in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
  69.       interfaces in QDIO and HIPER mode.
  70.     
  71.       For details please refer to the documentation provided by IBM at   
  72.       <http://www10.software.ibm.com/developerworks/opensource/linux390>
  73.  
  74.       To compile this driver as a module, choose M here: the
  75.       module will be called qeth.ko.
  76.  
  77.  
  78. comment "Gigabit Ethernet default settings"
  79.     depends on QETH
  80.  
  81. config QETH_IPV6
  82.     bool "IPv6 support for gigabit ethernet"
  83.     depends on (QETH = IPV6) || (QETH && IPV6 = 'y')
  84.     help
  85.       If CONFIG_QETH is switched on, this option will include IPv6
  86.       support in the qeth device driver.
  87.     
  88. config QETH_VLAN
  89.     bool "VLAN support for gigabit ethernet"
  90.     depends on (QETH = VLAN_8021Q) || (QETH && VLAN_8021Q = 'y')
  91.     help
  92.       If CONFIG_QETH is switched on, this option will include IEEE
  93.       802.1q VLAN support in the qeth device driver.
  94.  
  95. config QETH_PERF_STATS
  96.     bool "Performance statistics in /proc"
  97.     depends on QETH
  98.     help
  99.       When switched on, this option will add a file in the proc-fs
  100.       (/proc/qeth_perf_stats) containing performance statistics. It
  101.       may slightly impact performance, so this is only recommended for
  102.       internal tuning of the device driver.
  103.  
  104. config CCWGROUP
  105.      tristate
  106.     default (LCS || CTC || QETH)
  107.  
  108. endmenu
  109.