home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / drivers / md / Kconfig next >
Encoding:
Text File  |  2006-08-11  |  9.2 KB  |  268 lines

  1. #
  2. # Block device driver configuration
  3. #
  4.  
  5. menu "Multi-device support (RAID and LVM)"
  6.  
  7. config MD
  8.     bool "Multiple devices driver support (RAID and LVM)"
  9.     help
  10.       Support multiple physical spindles through a single logical device.
  11.       Required for RAID and logical volume management.
  12.  
  13. config BLK_DEV_MD
  14.     tristate "RAID support"
  15.     depends on MD
  16.     ---help---
  17.       This driver lets you combine several hard disk partitions into one
  18.       logical block device. This can be used to simply append one
  19.       partition to another one or to combine several redundant hard disks
  20.       into a RAID1/4/5 device so as to provide protection against hard
  21.       disk failures. This is called "Software RAID" since the combining of
  22.       the partitions is done by the kernel. "Hardware RAID" means that the
  23.       combining is done by a dedicated controller; if you have such a
  24.       controller, you do not need to say Y here.
  25.  
  26.       More information about Software RAID on Linux is contained in the
  27.       Software RAID mini-HOWTO, available from
  28.       <http://www.tldp.org/docs.html#howto>. There you will also learn
  29.       where to get the supporting user space utilities raidtools.
  30.  
  31.       If unsure, say N.
  32.  
  33. config MD_LINEAR
  34.     tristate "Linear (append) mode"
  35.     depends on BLK_DEV_MD
  36.     ---help---
  37.       If you say Y here, then your multiple devices driver will be able to
  38.       use the so-called linear mode, i.e. it will combine the hard disk
  39.       partitions by simply appending one to the other.
  40.  
  41.       To compile this as a module, choose M here: the module
  42.       will be called linear.
  43.  
  44.       If unsure, say Y.
  45.  
  46. config MD_RAID0
  47.     tristate "RAID-0 (striping) mode"
  48.     depends on BLK_DEV_MD
  49.     ---help---
  50.       If you say Y here, then your multiple devices driver will be able to
  51.       use the so-called raid0 mode, i.e. it will combine the hard disk
  52.       partitions into one logical device in such a fashion as to fill them
  53.       up evenly, one chunk here and one chunk there. This will increase
  54.       the throughput rate if the partitions reside on distinct disks.
  55.  
  56.       Information about Software RAID on Linux is contained in the
  57.       Software-RAID mini-HOWTO, available from
  58.       <http://www.tldp.org/docs.html#howto>. There you will also
  59.       learn where to get the supporting user space utilities raidtools.
  60.  
  61.       To compile this as a module, choose M here: the module
  62.       will be called raid0.
  63.  
  64.       If unsure, say Y.
  65.  
  66. config MD_RAID1
  67.     tristate "RAID-1 (mirroring) mode"
  68.     depends on BLK_DEV_MD
  69.     ---help---
  70.       A RAID-1 set consists of several disk drives which are exact copies
  71.       of each other.  In the event of a mirror failure, the RAID driver
  72.       will continue to use the operational mirrors in the set, providing
  73.       an error free MD (multiple device) to the higher levels of the
  74.       kernel.  In a set with N drives, the available space is the capacity
  75.       of a single drive, and the set protects against a failure of (N - 1)
  76.       drives.
  77.  
  78.       Information about Software RAID on Linux is contained in the
  79.       Software-RAID mini-HOWTO, available from
  80.       <http://www.tldp.org/docs.html#howto>.  There you will also
  81.       learn where to get the supporting user space utilities raidtools.
  82.  
  83.       If you want to use such a RAID-1 set, say Y.  To compile this code
  84.       as a module, choose M here: the module will be called raid1.
  85.  
  86.       If unsure, say Y.
  87.  
  88. config MD_RAID10
  89.     tristate "RAID-10 (mirrored striping) mode (EXPERIMENTAL)"
  90.     depends on BLK_DEV_MD && EXPERIMENTAL
  91.     ---help---
  92.       RAID-10 provides a combination of striping (RAID-0) and
  93.       mirroring (RAID-1) with easier configuration and more flexable
  94.       layout.
  95.       Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
  96.       be the same size (or at least, only as much as the smallest device
  97.       will be used).
  98.       RAID-10 provides a variety of layouts that provide different levels
  99.       of redundancy and performance.
  100.  
  101.       RAID-10 requires mdadm-1.7.0 or later, available at:
  102.  
  103.       ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
  104.  
  105.       If unsure, say Y.
  106.  
  107. config MD_RAID5
  108.     tristate "RAID-4/RAID-5 mode"
  109.     depends on BLK_DEV_MD
  110.     ---help---
  111.       A RAID-5 set of N drives with a capacity of C MB per drive provides
  112.       the capacity of C * (N - 1) MB, and protects against a failure
  113.       of a single drive. For a given sector (row) number, (N - 1) drives
  114.       contain data sectors, and one drive contains the parity protection.
  115.       For a RAID-4 set, the parity blocks are present on a single drive,
  116.       while a RAID-5 set distributes the parity across the drives in one
  117.       of the available parity distribution methods.
  118.  
  119.       Information about Software RAID on Linux is contained in the
  120.       Software-RAID mini-HOWTO, available from
  121.       <http://www.tldp.org/docs.html#howto>. There you will also
  122.       learn where to get the supporting user space utilities raidtools.
  123.  
  124.       If you want to use such a RAID-4/RAID-5 set, say Y.  To
  125.       compile this code as a module, choose M here: the module
  126.       will be called raid5.
  127.  
  128.       If unsure, say Y.
  129.  
  130. config MD_RAID5_RESHAPE
  131.     bool "Support adding drives to a raid-5 array (experimental)"
  132.     depends on MD_RAID5 && EXPERIMENTAL
  133.     ---help---
  134.       A RAID-5 set can be expanded by adding extra drives. This
  135.       requires "restriping" the array which means (almost) every
  136.       block must be written to a different place.
  137.  
  138.           This option allows such restriping to be done while the array
  139.       is online.  However it is still EXPERIMENTAL code.  It should
  140.       work, but please be sure that you have backups.
  141.  
  142.       You will need mdadm verion 2.4.1 or later to use this
  143.       feature safely.  During the early stage of reshape there is
  144.       a critical section where live data is being over-written.  A
  145.       crash during this time needs extra care for recovery.  The
  146.       newer mdadm takes a copy of the data in the critical section
  147.       and will restore it, if necessary, after a crash.
  148.  
  149.       The mdadm usage is e.g.
  150.            mdadm --grow /dev/md1 --raid-disks=6
  151.       to grow '/dev/md1' to having 6 disks.
  152.  
  153.       Note: The array can only be expanded, not contracted.
  154.       There should be enough spares already present to make the new
  155.       array workable.
  156.  
  157. config MD_RAID6
  158.     tristate "RAID-6 mode"
  159.     depends on BLK_DEV_MD
  160.     ---help---
  161.       A RAID-6 set of N drives with a capacity of C MB per drive
  162.       provides the capacity of C * (N - 2) MB, and protects
  163.       against a failure of any two drives. For a given sector
  164.       (row) number, (N - 2) drives contain data sectors, and two
  165.       drives contains two independent redundancy syndromes.  Like
  166.       RAID-5, RAID-6 distributes the syndromes across the drives
  167.       in one of the available parity distribution methods.
  168.  
  169.       RAID-6 requires mdadm-1.5.0 or later, available at:
  170.  
  171.       ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
  172.  
  173.       If you want to use such a RAID-6 set, say Y.  To compile
  174.       this code as a module, choose M here: the module will be
  175.       called raid6.
  176.  
  177.       If unsure, say Y.
  178.  
  179. config MD_MULTIPATH
  180.     tristate "Multipath I/O support"
  181.     depends on BLK_DEV_MD
  182.     help
  183.       Multipath-IO is the ability of certain devices to address the same
  184.       physical disk over multiple 'IO paths'. The code ensures that such
  185.       paths can be defined and handled at runtime, and ensures that a
  186.       transparent failover to the backup path(s) happens if a IO errors
  187.       arrives on the primary path.
  188.  
  189.       If unsure, say N.
  190.  
  191. config MD_FAULTY
  192.     tristate "Faulty test module for MD"
  193.     depends on BLK_DEV_MD
  194.     help
  195.       The "faulty" module allows for a block device that occasionally returns
  196.       read or write errors.  It is useful for testing.
  197.  
  198.       In unsure, say N.
  199.  
  200. config BLK_DEV_DM
  201.     tristate "Device mapper support"
  202.     depends on MD
  203.     ---help---
  204.       Device-mapper is a low level volume manager.  It works by allowing
  205.       people to specify mappings for ranges of logical sectors.  Various
  206.       mapping types are available, in addition people may write their own
  207.       modules containing custom mappings if they wish.
  208.  
  209.       Higher level volume managers such as LVM2 use this driver.
  210.  
  211.       To compile this as a module, choose M here: the module will be
  212.       called dm-mod.
  213.  
  214.       If unsure, say N.
  215.  
  216. config DM_CRYPT
  217.     tristate "Crypt target support"
  218.     depends on BLK_DEV_DM && EXPERIMENTAL
  219.     select CRYPTO
  220.     ---help---
  221.       This device-mapper target allows you to create a device that
  222.       transparently encrypts the data on it. You'll need to activate
  223.       the ciphers you're going to use in the cryptoapi configuration.
  224.  
  225.       Information on how to use dm-crypt can be found on
  226.  
  227.       <http://www.saout.de/misc/dm-crypt/>
  228.  
  229.       To compile this code as a module, choose M here: the module will
  230.       be called dm-crypt.
  231.  
  232.       If unsure, say N.
  233.  
  234. config DM_SNAPSHOT
  235.        tristate "Snapshot target (EXPERIMENTAL)"
  236.        depends on BLK_DEV_DM && EXPERIMENTAL
  237.        ---help---
  238.          Allow volume managers to take writeable snapshots of a device.
  239.  
  240. config DM_MIRROR
  241.        tristate "Mirror target (EXPERIMENTAL)"
  242.        depends on BLK_DEV_DM && EXPERIMENTAL
  243.        ---help---
  244.          Allow volume managers to mirror logical volumes, also
  245.          needed for live data migration tools such as 'pvmove'.
  246.  
  247. config DM_ZERO
  248.     tristate "Zero target (EXPERIMENTAL)"
  249.     depends on BLK_DEV_DM && EXPERIMENTAL
  250.     ---help---
  251.       A target that discards writes, and returns all zeroes for
  252.       reads.  Useful in some recovery situations.
  253.  
  254. config DM_MULTIPATH
  255.     tristate "Multipath target (EXPERIMENTAL)"
  256.     depends on BLK_DEV_DM && EXPERIMENTAL
  257.     ---help---
  258.       Allow volume managers to support multipath hardware.
  259.  
  260. config DM_MULTIPATH_EMC
  261.     tristate "EMC CX/AX multipath support (EXPERIMENTAL)"
  262.     depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
  263.     ---help---
  264.       Multipath support for EMC CX/AX series hardware.
  265.  
  266. endmenu
  267.  
  268.