home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / drivers / ieee1394 / Kconfig next >
Encoding:
Text File  |  2006-08-11  |  6.3 KB  |  182 lines

  1. # -*- shell-script -*-
  2.  
  3. menu "IEEE 1394 (FireWire) support"
  4.  
  5. config IEEE1394
  6.     tristate "IEEE 1394 (FireWire) support"
  7.     depends on PCI || BROKEN
  8.     select NET
  9.     help
  10.       IEEE 1394 describes a high performance serial bus, which is also
  11.       known as FireWire(tm) or i.Link(tm) and is used for connecting all
  12.       sorts of devices (most notably digital video cameras) to your
  13.       computer.
  14.  
  15.       If you have FireWire hardware and want to use it, say Y here.  This
  16.       is the core support only, you will also need to select a driver for
  17.       your IEEE 1394 adapter.
  18.  
  19.       To compile this driver as a module, say M here: the
  20.       module will be called ieee1394.
  21.  
  22. comment "Subsystem Options"
  23.     depends on IEEE1394
  24.  
  25. config IEEE1394_VERBOSEDEBUG
  26.     bool "Excessive debugging output"
  27.     depends on IEEE1394
  28.     help
  29.       If you say Y here, you will get very verbose debugging logs from
  30.       the subsystem which includes a dump of the header of every sent
  31.       and received packet.  This can amount to a high amount of data
  32.       collected in a very short time which is usually also saved to
  33.       disk by the system logging daemons.
  34.  
  35.       Say Y if you really want or need the debugging output, everyone
  36.       else says N.
  37.  
  38. config IEEE1394_OUI_DB
  39.     bool "OUI Database built-in"
  40.     depends on IEEE1394
  41.     help
  42.       If you say Y here, then an OUI list (vendor unique ID's) will be
  43.       compiled into the ieee1394 module. This doesn't really do much
  44.       except being able to display the vendor of a hardware node. The
  45.       downside is that it adds about 300k to the size of the module,
  46.       or kernel (depending on whether you compile ieee1394 as a
  47.       module, or static in the kernel).
  48.  
  49.       This option is not needed for userspace programs like gscanbus
  50.       to show this information.
  51.  
  52. config IEEE1394_EXTRA_CONFIG_ROMS
  53.     bool "Build in extra config rom entries for certain functionality"
  54.     depends on IEEE1394
  55.     help
  56.       Some IEEE1394 functionality depends on extra config rom entries
  57.       being available in the host adapters CSR. These options will
  58.       allow you to choose which ones.
  59.  
  60. config IEEE1394_CONFIG_ROM_IP1394
  61.     bool "IP-1394 Entry"
  62.     depends on IEEE1394_EXTRA_CONFIG_ROMS && IEEE1394
  63.     help
  64.       Adds an entry for using IP-over-1394. If you want to use your
  65.       IEEE1394 bus as a network for IP systems (including interacting
  66.       with MacOSX and WinXP IP-over-1394), enable this option and the
  67.       eth1394 option below.
  68.  
  69. config IEEE1394_EXPORT_FULL_API
  70.     bool "Export all symbols of ieee1394's API"
  71.     depends on IEEE1394
  72.     default n
  73.     help
  74.       Export all symbols of ieee1394's driver programming interface, even
  75.       those that are not currently used by the standard IEEE 1394 drivers.
  76.  
  77.       This option does not affect the interface to userspace applications.
  78.       Say Y here if you want to compile externally developed drivers that
  79.       make extended use of ieee1394's API. It is otherwise safe to say N.
  80.  
  81. comment "Device Drivers"
  82.     depends on IEEE1394
  83.  
  84. comment "Texas Instruments PCILynx requires I2C"
  85.     depends on IEEE1394 && I2C=n
  86.  
  87. config IEEE1394_PCILYNX
  88.     tristate "Texas Instruments PCILynx support"
  89.     depends on PCI && IEEE1394 && I2C
  90.     select I2C_ALGOBIT
  91.     help
  92.       Say Y here if you have an IEEE-1394 controller with the Texas
  93.       Instruments PCILynx chip.  Note: this driver is written for revision
  94.       2 of this chip and may not work with revision 0.
  95.  
  96.       To compile this driver as a module, say M here: the
  97.       module will be called pcilynx.
  98.  
  99. config IEEE1394_OHCI1394
  100.     tristate "OHCI-1394 support"
  101.     depends on PCI && IEEE1394
  102.     help
  103.       Enable this driver if you have an IEEE 1394 controller based on the
  104.       OHCI-1394 specification. The current driver is only tested with OHCI
  105.       chipsets made by Texas Instruments and NEC. Most third-party vendors
  106.       use one of these chipsets.  It should work with any OHCI-1394
  107.       compliant card, however.
  108.  
  109.       To compile this driver as a module, say M here: the
  110.       module will be called ohci1394.
  111.  
  112. comment "Protocol Drivers"
  113.     depends on IEEE1394
  114.  
  115. config IEEE1394_VIDEO1394
  116.     tristate "OHCI-1394 Video support"
  117.     depends on IEEE1394 && IEEE1394_OHCI1394
  118.     help
  119.       This option enables video device usage for OHCI-1394 cards.  Enable
  120.       this option only if you have an IEEE 1394 video device connected to
  121.       an OHCI-1394 card.
  122.  
  123. config IEEE1394_SBP2
  124.     tristate "SBP-2 support (Harddisks etc.)"
  125.     depends on IEEE1394 && SCSI && (PCI || BROKEN)
  126.     help
  127.       This option enables you to use SBP-2 devices connected to your IEEE
  128.       1394 bus.  SBP-2 devices include harddrives and DVD devices.
  129.  
  130. config IEEE1394_SBP2_PHYS_DMA
  131.     bool "Enable replacement for physical DMA in SBP2"
  132.     depends on IEEE1394 && IEEE1394_SBP2 && EXPERIMENTAL && (X86_32 || PPC_32)
  133.     help
  134.       This builds sbp2 for use with non-OHCI host adapters which do not
  135.       support physical DMA or for when ohci1394 is run with phys_dma=0.
  136.       Physical DMA is data movement without assistence of the drivers'
  137.       interrupt handlers.  This option includes the interrupt handlers
  138.       that are required in absence of this hardware feature.
  139.  
  140.       This option is buggy and currently broken on some architectures.
  141.       If unsure, say N.
  142.  
  143. config IEEE1394_ETH1394
  144.     tristate "Ethernet over 1394"
  145.     depends on IEEE1394 && EXPERIMENTAL && INET
  146.     select IEEE1394_CONFIG_ROM_IP1394
  147.     select IEEE1394_EXTRA_CONFIG_ROMS
  148.     help
  149.       This driver implements a functional majority of RFC 2734: IPv4 over
  150.       1394.  It will provide IP connectivity with implementations of RFC
  151.       2734 found on other operating systems.  It will not communicate with
  152.       older versions of this driver found in stock kernels prior to 2.6.3.
  153.       This driver is still considered experimental.  It does not yet support
  154.       MCAP, therefore multicast support is significantly limited.
  155.  
  156. config IEEE1394_DV1394
  157.     tristate "OHCI-DV I/O support"
  158.     depends on IEEE1394 && IEEE1394_OHCI1394
  159.     help
  160.       This driver allows you to transmit and receive DV (digital video)
  161.       streams on an OHCI-1394 card using a simple frame-oriented
  162.       interface.
  163.  
  164.       The user-space API for dv1394 is documented in dv1394.h.
  165.  
  166.       To compile this driver as a module, say M here: the
  167.       module will be called dv1394.
  168.  
  169. config IEEE1394_RAWIO
  170.     tristate "Raw IEEE1394 I/O support"
  171.     depends on IEEE1394
  172.     help
  173.       Say Y here if you want support for the raw device. This is generally
  174.       a good idea, so you should say Y here. The raw device enables
  175.       direct communication of user programs with the IEEE 1394 bus and
  176.       thus with the attached peripherals.
  177.  
  178.       To compile this driver as a module, say M here: the
  179.       module will be called raw1394.
  180.  
  181. endmenu
  182.