PC Welt 2006 November (DVD)

home *** CD-ROM | disk | FTP | other *** search

/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / drivers / hwmon / Kconfig next >

Wrap

Text File | 2006-08-11 | 13.9 KB | 464 lines

# # I2C Sensor chip drivers configuration # menu "Hardware Monitoring support" config HWMON tristate "Hardware Monitoring support" default y help Hardware monitoring devices let you monitor the hardware health of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below. This support can also be built as a module. If so, the module will be called hwmon. config HWMON_VID tristate default n config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on HWMON && I2C help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, and the XEON processor built-in sensor. This driver can also be built as a module. If so, the module will be called adm1021. config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. This driver can also be built as a module. If so, the module will be called adm1025. config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 sensor chip. This driver can also be built as a module. If so, the module will be called adm1026. config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. This driver can also be built as a module. If so, the module will be called adm1031. config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. This driver can also be built as a module. If so, the module will be called adm9240. config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor chip found on some Asus mainboards. This driver can also be built as a module. If so, the module will be called asb100. config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID controller. If your board have such a chip, you are able to control your CPU core and other voltages. This driver can also be built as a module. If so, the module will be called atxp1. config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. This driver can also be built as a module. If so, the module will be called ds1621. config SENSORS_F71805F tristate "Fintek F71805F/FG" depends on HWMON && EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F71805F/FG chips. This driver can also be built as a module. If so, the module will be called f71805f. config SENSORS_FSCHER tristate "FSC Hermes" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. This driver can also be built as a module. If so, the module will be called fscher. config SENSORS_FSCPOS tristate "FSC Poseidon" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. This driver can also be built as a module. If so, the module will be called fscpos. config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on HWMON && I2C help If you say yes here you get support for Genesys Logic GL518SM sensor chips. This driver can also be built as a module. If so, the module will be called gl518sm. config SENSORS_GL520SM tristate "Genesys Logic GL520SM" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM sensor chips. This driver can also be built as a module. If so, the module will be called gl520sm. config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on HWMON && I2C select I2C_ISA select HWMON_VID help If you say yes here you get support for ITE IT87xx sensor chips and clones: SiS960. This driver can also be built as a module. If so, the module will be called it87. config SENSORS_LM63 tristate "National Semiconductor LM63" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor LM63 remote diode digital temperature sensor with integrated fan control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) motherboard, among others. This driver can also be built as a module. If so, the module will be called lm63. config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on HWMON && I2C help If you say yes here you get support for National Semiconductor LM75 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in 9-bit precision mode), and TelCom (now Microchip) TCN75. The DS75 and DS1775 in 10- to 12-bit precision modes will require a force module parameter. The driver will not handle the extra precision anyhow. This driver can also be built as a module. If so, the module will be called lm75. config SENSORS_LM77 tristate "National Semiconductor LM77" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for National Semiconductor LM77 sensor chips. This driver can also be built as a module. If so, the module will be called lm77. config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" depends on HWMON && I2C && EXPERIMENTAL select I2C_ISA select HWMON_VID help If you say yes here you get support for National Semiconductor LM78, LM78-J and LM79. This driver can also be built as a module. If so, the module will be called lm78. config SENSORS_LM80 tristate "National Semiconductor LM80" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for National Semiconductor LM80 sensor chips. This driver can also be built as a module. If so, the module will be called lm80. config SENSORS_LM83 tristate "National Semiconductor LM83" depends on HWMON && I2C help If you say yes here you get support for National Semiconductor LM83 sensor chips. This driver can also be built as a module. If so, the module will be called lm83. config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. This driver can also be built as a module. If so, the module will be called lm85. config SENSORS_LM87 tristate "National Semiconductor LM87" depends on HWMON && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 sensor chips. This driver can also be built as a module. If so, the module will be called lm87. config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" depends on HWMON && I2C help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and MAX6658 sensor chips. The Analog Devices ADT7461 sensor chip is also supported, but only if found in ADM1032 compatibility mode. This driver can also be built as a module. If so, the module will be called lm90. config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. This driver can also be built as a module. If so, the module will be called lm92. config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for MAX1619 sensor chip. This driver can also be built as a module. If so, the module will be called max1619. config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" depends on HWMON && I2C && EXPERIMENTAL select I2C_ISA select HWMON_VID help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC8736x Super-I/O chips. The PC87360, PC87363 and PC87364 only have fan monitoring and control. The PC87365 and PC87366 additionally have voltage and temperature monitoring. This driver can also be built as a module. If so, the module will be called pc87360. config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on HWMON && I2C && PCI && EXPERIMENTAL select I2C_ISA help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. This driver can also be built as a module. If so, the module will be called sis5595. config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" depends on HWMON && I2C && EXPERIMENTAL select I2C_ISA help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips. This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" depends on HWMON && I2C && EXPERIMENTAL select I2C_ISA help If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. This driver can also be built as a module. If so, the module will be called smsc47b397. config SENSORS_VIA686A tristate "VIA686A" depends on HWMON && I2C && PCI select I2C_ISA help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. This driver can also be built as a module. If so, the module will be called via686a. config SENSORS_VT8231 tristate "VT8231" depends on HWMON && I2C && PCI && EXPERIMENTAL select HWMON_VID select I2C_ISA help If you say yes here then you get support for the integrated sensors in the VIA VT8231 device. This driver can also be built as a module. If so, the module will be called vt8231. config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" depends on HWMON && I2C select I2C_ISA select HWMON_VID help If you say yes here you get support for the Winbond W8378x series of sensor chips: the W83781D, W83782D, W83783S and W83627HF, and the similar Asus AS99127F. This driver can also be built as a module. If so, the module will be called w83781d. config SENSORS_W83792D tristate "Winbond W83792D" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83792D chip. This driver can also be built as a module. If so, the module will be called w83792d. config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" depends on HWMON && I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other motherboards. This driver can also be built as a module. If so, the module will be called w83l785ts. config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" depends on HWMON && I2C select I2C_ISA select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and W83697HF. This driver can also be built as a module. If so, the module will be called w83627hf. config SENSORS_W83627EHF tristate "Winbond W83627EHF" depends on HWMON && I2C && EXPERIMENTAL select I2C_ISA help If you say yes here you get preliminary support for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip. Only fan and temperature inputs are supported at the moment, while the chip does much more than that. This driver also supports the W83627EHG, which is the lead-free version of the W83627EHF. This driver can also be built as a module. If so, the module will be called w83627ehf. config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" depends on HWMON && INPUT && X86 default n help This driver provides support for the IBM Hard Drive Active Protection System (hdaps), which provides an accelerometer and other misc. data. ThinkPads starting with the R50, T41, and X40 are supported. The accelerometer data is readable via sysfs. This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. config HWMON_DEBUG_CHIP bool "Hardware Monitoring Chip debugging messages" depends on HWMON default n help Say Y here if you want the I2C chip drivers to produce a bunch of debug messages to the system log. Select this if you are having a problem with I2C support and want to see more of what is going on. endmenu