home *** CD-ROM | disk | FTP | other *** search
/ PC Welt 2006 November (DVD) / PCWELT_11_2006.ISO / casper / filesystem.squashfs / usr / src / linux-headers-2.6.17-6 / arch / m68k / Kconfig < prev    next >
Encoding:
Text File  |  2006-08-11  |  20.7 KB  |  664 lines

  1. #
  2. # For a description of the syntax of this configuration file,
  3. # see Documentation/kbuild/kconfig-language.txt.
  4. #
  5. config M68K
  6.     bool
  7.     default y
  8.  
  9. config MMU
  10.     bool
  11.     default y
  12.  
  13. config RWSEM_GENERIC_SPINLOCK
  14.     bool
  15.     default y
  16.  
  17. config RWSEM_XCHGADD_ALGORITHM
  18.     bool
  19.  
  20. config GENERIC_HWEIGHT
  21.     bool
  22.     default y
  23.  
  24. config GENERIC_CALIBRATE_DELAY
  25.     bool
  26.     default y
  27.  
  28. config TIME_LOW_RES
  29.     bool
  30.     default y
  31.  
  32. config ARCH_MAY_HAVE_PC_FDC
  33.     bool
  34.     depends on Q40 || (BROKEN && SUN3X)
  35.     default y
  36.  
  37. mainmenu "Linux/68k Kernel Configuration"
  38.  
  39. source "init/Kconfig"
  40.  
  41. menu "Platform dependent setup"
  42.  
  43. config EISA
  44.     bool
  45.     ---help---
  46.       The Extended Industry Standard Architecture (EISA) bus was
  47.       developed as an open alternative to the IBM MicroChannel bus.
  48.  
  49.       The EISA bus provided some of the features of the IBM MicroChannel
  50.       bus while maintaining backward compatibility with cards made for
  51.       the older ISA bus.  The EISA bus saw limited use between 1988 and
  52.       1995 when it was made obsolete by the PCI bus.
  53.  
  54.       Say Y here if you are building a kernel for an EISA-based machine.
  55.  
  56.       Otherwise, say N.
  57.  
  58. config MCA
  59.     bool
  60.     help
  61.       MicroChannel Architecture is found in some IBM PS/2 machines and
  62.       laptops.  It is a bus system similar to PCI or ISA. See
  63.       <file:Documentation/mca.txt> (and especially the web page given
  64.       there) before attempting to build an MCA bus kernel.
  65.  
  66. config PCMCIA
  67.     tristate
  68.     ---help---
  69.       Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  70.       computer.  These are credit-card size devices such as network cards,
  71.       modems or hard drives often used with laptops computers.  There are
  72.       actually two varieties of these cards: the older 16 bit PCMCIA cards
  73.       and the newer 32 bit CardBus cards.  If you want to use CardBus
  74.       cards, you need to say Y here and also to "CardBus support" below.
  75.  
  76.       To use your PC-cards, you will need supporting software from David
  77.       Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
  78.       for location).  Please also read the PCMCIA-HOWTO, available from
  79.       <http://www.tldp.org/docs.html#howto>.
  80.  
  81.       To compile this driver as modules, choose M here: the
  82.       modules will be called pcmcia_core and ds.
  83.  
  84. config SUN3
  85.     bool "Sun3 support"
  86.     select M68020
  87.     select MMU_SUN3 if MMU
  88.     help
  89.       This option enables support for the Sun 3 series of workstations
  90.       (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
  91.       that all other hardware types must be disabled, as Sun 3 kernels
  92.       are incompatible with all other m68k targets (including Sun 3x!).
  93.  
  94.       If you don't want to compile a kernel exclusively for a Sun 3, say N.
  95.  
  96. config AMIGA
  97.     bool "Amiga support"
  98.     depends on !MMU_SUN3
  99.     help
  100.       This option enables support for the Amiga series of computers. If
  101.       you plan to use this kernel on an Amiga, say Y here and browse the
  102.       material available in <file:Documentation/m68k>; otherwise say N.
  103.  
  104. config ATARI
  105.     bool "Atari support"
  106.     depends on !MMU_SUN3
  107.     help
  108.       This option enables support for the 68000-based Atari series of
  109.       computers (including the TT, Falcon and Medusa). If you plan to use
  110.       this kernel on an Atari, say Y here and browse the material
  111.       available in <file:Documentation/m68k>; otherwise say N.
  112.  
  113. config HADES
  114.     bool "Hades support"
  115.     depends on ATARI && BROKEN
  116.     help
  117.       This option enables support for the Hades Atari clone. If you plan
  118.       to use this kernel on a Hades, say Y here; otherwise say N.
  119.  
  120. config PCI
  121.     bool
  122.     depends on HADES
  123.     default y
  124.     help
  125.       Find out whether you have a PCI motherboard. PCI is the name of a
  126.       bus system, i.e. the way the CPU talks to the other stuff inside
  127.       your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
  128.       VESA. If you have PCI, say Y, otherwise N.
  129.  
  130.       The PCI-HOWTO, available from
  131.       <http://www.tldp.org/docs.html#howto>, contains valuable
  132.       information about which PCI hardware does work under Linux and which
  133.       doesn't.
  134.  
  135. config MAC
  136.     bool "Macintosh support"
  137.     depends on !MMU_SUN3
  138.     help
  139.       This option enables support for the Apple Macintosh series of
  140.       computers (yes, there is experimental support now, at least for part
  141.       of the series).
  142.  
  143.       Say N unless you're willing to code the remaining necessary support.
  144.       ;)
  145.  
  146. config NUBUS
  147.     bool
  148.     depends on MAC
  149.     default y
  150.  
  151. config M68K_L2_CACHE
  152.     bool
  153.     depends on MAC
  154.     default y
  155.  
  156. config APOLLO
  157.     bool "Apollo support"
  158.     depends on !MMU_SUN3
  159.     help
  160.       Say Y here if you want to run Linux on an MC680x0-based Apollo
  161.       Domain workstation such as the DN3500.
  162.  
  163. config VME
  164.     bool "VME (Motorola and BVM) support"
  165.     depends on !MMU_SUN3
  166.     help
  167.       Say Y here if you want to build a kernel for a 680x0 based VME
  168.       board.  Boards currently supported include Motorola boards MVME147,
  169.       MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
  170.       BVME6000 boards from BVM Ltd are also supported.
  171.  
  172. config MVME147
  173.     bool "MVME147 support"
  174.     depends on VME
  175.     help
  176.       Say Y to include support for early Motorola VME boards.  This will
  177.       build a kernel which can run on MVME147 single-board computers.  If
  178.       you select this option you will have to select the appropriate
  179.       drivers for SCSI, Ethernet and serial ports later on.
  180.  
  181. config MVME16x
  182.     bool "MVME162, 166 and 167 support"
  183.     depends on VME
  184.     help
  185.       Say Y to include support for Motorola VME boards.  This will build a
  186.       kernel which can run on MVME162, MVME166, MVME167, MVME172, and
  187.       MVME177 boards.  If you select this option you will have to select
  188.       the appropriate drivers for SCSI, Ethernet and serial ports later
  189.       on.
  190.  
  191. config BVME6000
  192.     bool "BVME4000 and BVME6000 support"
  193.     depends on VME
  194.     help
  195.       Say Y to include support for VME boards from BVM Ltd.  This will
  196.       build a kernel which can run on BVME4000 and BVME6000 boards.  If
  197.       you select this option you will have to select the appropriate
  198.       drivers for SCSI, Ethernet and serial ports later on.
  199.  
  200. config HP300
  201.     bool "HP9000/300 and HP9000/400 support"
  202.     depends on !MMU_SUN3
  203.     help
  204.       This option enables support for the HP9000/300 and HP9000/400 series
  205.       of workstations. Support for these machines is still somewhat
  206.       experimental. If you plan to try to use the kernel on such a machine
  207.       say Y here.
  208.       Everybody else says N.
  209.  
  210. config DIO
  211.     bool "DIO bus support"
  212.     depends on HP300
  213.     default y
  214.     help
  215.       Say Y here to enable support for the "DIO" expansion bus used in
  216.       HP300 machines. If you are using such a system you almost certainly
  217.       want this.
  218.  
  219. config SUN3X
  220.     bool "Sun3x support"
  221.     depends on !MMU_SUN3
  222.     select M68030
  223.     help
  224.       This option enables support for the Sun 3x series of workstations.
  225.       Be warned that this support is very experimental.
  226.       Note that Sun 3x kernels are not compatible with Sun 3 hardware.
  227.       General Linux information on the Sun 3x series (now discontinued)
  228.       is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
  229.  
  230.       If you don't want to compile a kernel for a Sun 3x, say N.
  231.  
  232. config Q40
  233.     bool "Q40/Q60 support"
  234.     depends on !MMU_SUN3
  235.     help
  236.       The Q40 is a Motorola 68040-based successor to the Sinclair QL
  237.       manufactured in Germany.  There is an official Q40 home page at
  238.       <http://www.q40.de/>.  This option enables support for the Q40 and
  239.       Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
  240.       emulation.
  241.  
  242. comment "Processor type"
  243.  
  244. config M68020
  245.     bool "68020 support"
  246.     help
  247.       If you anticipate running this kernel on a computer with a MC68020
  248.       processor, say Y. Otherwise, say N. Note that the 68020 requires a
  249.       68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
  250.       Sun 3, which provides its own version.
  251.  
  252. config M68030
  253.     bool "68030 support"
  254.     depends on !MMU_SUN3
  255.     help
  256.       If you anticipate running this kernel on a computer with a MC68030
  257.       processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
  258.       work, as it does not include an MMU (Memory Management Unit).
  259.  
  260. config M68040
  261.     bool "68040 support"
  262.     depends on !MMU_SUN3
  263.     help
  264.       If you anticipate running this kernel on a computer with a MC68LC040
  265.       or MC68040 processor, say Y. Otherwise, say N. Note that an
  266.       MC68EC040 will not work, as it does not include an MMU (Memory
  267.       Management Unit).
  268.  
  269. config M68060
  270.     bool "68060 support"
  271.     depends on !MMU_SUN3
  272.     help
  273.       If you anticipate running this kernel on a computer with a MC68060
  274.       processor, say Y. Otherwise, say N.
  275.  
  276. config MMU_MOTOROLA
  277.     bool
  278.     depends on MMU && !MMU_SUN3
  279.     default y
  280.  
  281. config MMU_SUN3
  282.     bool
  283.  
  284. config M68KFPU_EMU
  285.     bool "Math emulation support (EXPERIMENTAL)"
  286.     depends on EXPERIMENTAL
  287.     help
  288.       At some point in the future, this will cause floating-point math
  289.       instructions to be emulated by the kernel on machines that lack a
  290.       floating-point math coprocessor.  Thrill-seekers and chronically
  291.       sleep-deprived psychotic hacker types can say Y now, everyone else
  292.       should probably wait a while.
  293.  
  294. config M68KFPU_EMU_EXTRAPREC
  295.     bool "Math emulation extra precision"
  296.     depends on M68KFPU_EMU
  297.     help
  298.       The fpu uses normally a few bit more during calculations for
  299.       correct rounding, the emulator can (often) do the same but this
  300.       extra calculation can cost quite some time, so you can disable
  301.       it here. The emulator will then "only" calculate with a 64 bit
  302.       mantissa and round slightly incorrect, what is more then enough
  303.       for normal usage.
  304.  
  305. config M68KFPU_EMU_ONLY
  306.     bool "Math emulation only kernel"
  307.     depends on M68KFPU_EMU
  308.     help
  309.       This option prevents any floating-point instructions from being
  310.       compiled into the kernel, thereby the kernel doesn't save any
  311.       floating point context anymore during task switches, so this
  312.       kernel will only be usable on machines without a floating-point
  313.       math coprocessor. This makes the kernel a bit faster as no tests
  314.       needs to be executed whether a floating-point instruction in the
  315.       kernel should be executed or not.
  316.  
  317. config ADVANCED
  318.     bool "Advanced configuration options"
  319.     ---help---
  320.       This gives you access to some advanced options for the CPU. The
  321.       defaults should be fine for most users, but these options may make
  322.       it possible for you to improve performance somewhat if you know what
  323.       you are doing.
  324.  
  325.       Note that the answer to this question won't directly affect the
  326.       kernel: saying N will just cause the configurator to skip all
  327.       the questions about these options.
  328.  
  329.       Most users should say N to this question.
  330.  
  331. config RMW_INSNS
  332.     bool "Use read-modify-write instructions"
  333.     depends on ADVANCED
  334.     ---help---
  335.       This allows to use certain instructions that work with indivisible
  336.       read-modify-write bus cycles. While this is faster than the
  337.       workaround of disabling interrupts, it can conflict with DMA
  338.       ( = direct memory access) on many Amiga systems, and it is also said
  339.       to destabilize other machines. It is very likely that this will
  340.       cause serious problems on any Amiga or Atari Medusa if set. The only
  341.       configuration where it should work are 68030-based Ataris, where it
  342.       apparently improves performance. But you've been warned! Unless you
  343.       really know what you are doing, say N. Try Y only if you're quite
  344.       adventurous.
  345.  
  346. config SINGLE_MEMORY_CHUNK
  347.     bool "Use one physical chunk of memory only"
  348.     depends on ADVANCED && !SUN3
  349.     help
  350.       Ignore all but the first contiguous chunk of physical memory for VM
  351.       purposes.  This will save a few bytes kernel size and may speed up
  352.       some operations.  Say N if not sure.
  353.  
  354. config 060_WRITETHROUGH
  355.     bool "Use write-through caching for 68060 supervisor accesses"
  356.     depends on ADVANCED && M68060
  357.     ---help---
  358.       The 68060 generally uses copyback caching of recently accessed data.
  359.       Copyback caching means that memory writes will be held in an on-chip
  360.       cache and only written back to memory some time later.  Saying Y
  361.       here will force supervisor (kernel) accesses to use writethrough
  362.       caching.  Writethrough caching means that data is written to memory
  363.       straight away, so that cache and memory data always agree.
  364.       Writethrough caching is less efficient, but is needed for some
  365.       drivers on 68060 based systems where the 68060 bus snooping signal
  366.       is hardwired on.  The 53c710 SCSI driver is known to suffer from
  367.       this problem.
  368.  
  369. source "mm/Kconfig"
  370.  
  371. endmenu
  372.  
  373. menu "General setup"
  374.  
  375. source "fs/Kconfig.binfmt"
  376.  
  377. config ZORRO
  378.     bool "Amiga Zorro (AutoConfig) bus support"
  379.     depends on AMIGA
  380.     help
  381.       This enables support for the Zorro bus in the Amiga. If you have
  382.       expansion cards in your Amiga that conform to the Amiga
  383.       AutoConfig(tm) specification, say Y, otherwise N. Note that even
  384.       expansion cards that do not fit in the Zorro slots but fit in e.g.
  385.       the CPU slot may fall in this category, so you have to say Y to let
  386.       Linux use these.
  387.  
  388. config AMIGA_PCMCIA
  389.     bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
  390.     depends on AMIGA && EXPERIMENTAL
  391.     help
  392.       Include support in the kernel for pcmcia on Amiga 1200 and Amiga
  393.       600. If you intend to use pcmcia cards say Y; otherwise say N.
  394.  
  395. config STRAM_PROC
  396.     bool "ST-RAM statistics in /proc"
  397.     depends on ATARI
  398.     help
  399.       Say Y here to report ST-RAM usage statistics in /proc/stram.
  400.  
  401. config HEARTBEAT
  402.     bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
  403.     default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
  404.     help
  405.       Use the power-on LED on your machine as a load meter.  The exact
  406.       behavior is platform-dependent, but normally the flash frequency is
  407.       a hyperbolic function of the 5-minute load average.
  408.  
  409. # We have a dedicated heartbeat LED. :-)
  410. config PROC_HARDWARE
  411.     bool "/proc/hardware support"
  412.     help
  413.       Say Y here to support the /proc/hardware file, which gives you
  414.       access to information about the machine you're running on,
  415.       including the model, CPU, MMU, clock speed, BogoMIPS rating,
  416.       and memory size.
  417.  
  418. config ISA
  419.     bool
  420.     depends on Q40 || AMIGA_PCMCIA || GG2
  421.     default y
  422.     help
  423.       Find out whether you have ISA slots on your motherboard.  ISA is the
  424.       name of a bus system, i.e. the way the CPU talks to the other stuff
  425.       inside your box.  Other bus systems are PCI, EISA, MicroChannel
  426.       (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
  427.       newer boards don't support it.  If you have ISA, say Y, otherwise N.
  428.  
  429. config GENERIC_ISA_DMA
  430.     bool
  431.     depends on Q40 || AMIGA_PCMCIA || GG2
  432.     default y
  433.  
  434. source "drivers/pci/Kconfig"
  435.  
  436. source "drivers/zorro/Kconfig"
  437.  
  438. endmenu
  439.  
  440. source "net/Kconfig"
  441.  
  442. source "drivers/Kconfig"
  443.  
  444. menu "Character devices"
  445.  
  446. config ATARI_MFPSER
  447.     tristate "Atari MFP serial support"
  448.     depends on ATARI
  449.     ---help---
  450.       If you like to use the MFP serial ports ("Modem1", "Serial1") under
  451.       Linux, say Y. The driver equally supports all kinds of MFP serial
  452.       ports and automatically detects whether Serial1 is available.
  453.  
  454.       To compile this driver as a module, choose M here.
  455.  
  456.       Note for Falcon users: You also have an MFP port, it's just not
  457.       wired to the outside... But you could use the port under Linux.
  458.  
  459. config ATARI_SCC
  460.     tristate "Atari SCC serial support"
  461.     depends on ATARI
  462.     ---help---
  463.       If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
  464.       LAN) and like to use them under Linux, say Y. All built-in SCC's are
  465.       supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
  466.       two connectors for channel A (Serial2 and LAN), they are visible as
  467.       two separate devices.
  468.  
  469.       To compile this driver as a module, choose M here.
  470.  
  471. config ATARI_SCC_DMA
  472.     bool "Atari SCC serial DMA support"
  473.     depends on ATARI_SCC
  474.     help
  475.       This enables DMA support for receiving data on channel A of the SCC.
  476.       If you have a TT you may say Y here and read
  477.       drivers/char/atari_SCC.README. All other users should say N here,
  478.       because only the TT has SCC-DMA, even if your machine keeps claiming
  479.       so at boot time.
  480.  
  481. config ATARI_MIDI
  482.     tristate "Atari MIDI serial support"
  483.     depends on ATARI
  484.     help
  485.       If you want to use your Atari's MIDI port in Linux, say Y.
  486.  
  487.       To compile this driver as a module, choose M here.
  488.  
  489. config ATARI_DSP56K
  490.     tristate "Atari DSP56k support (EXPERIMENTAL)"
  491.     depends on ATARI && EXPERIMENTAL
  492.     help
  493.       If you want to be able to use the DSP56001 in Falcons, say Y. This
  494.       driver is still experimental, and if you don't know what it is, or
  495.       if you don't have this processor, just say N.
  496.  
  497.       To compile this driver as a module, choose M here.
  498.  
  499. config AMIGA_BUILTIN_SERIAL
  500.     tristate "Amiga builtin serial support"
  501.     depends on AMIGA
  502.     help
  503.       If you want to use your Amiga's built-in serial port in Linux,
  504.       answer Y.
  505.  
  506.       To compile this driver as a module, choose M here.
  507.  
  508. config WHIPPET_SERIAL
  509.     tristate "Hisoft Whippet PCMCIA serial support"
  510.     depends on AMIGA_PCMCIA
  511.     help
  512.       HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
  513.       is no listing for the Whippet in their Amiga section.
  514.  
  515. config MULTIFACE_III_TTY
  516.     tristate "Multiface Card III serial support"
  517.     depends on AMIGA
  518.     help
  519.       If you want to use a Multiface III card's serial port in Linux,
  520.       answer Y.
  521.  
  522.       To compile this driver as a module, choose M here.
  523.  
  524. config GVPIOEXT
  525.     tristate "GVP IO-Extender support"
  526.     depends on PARPORT=n && ZORRO
  527.     help
  528.       If you want to use a GVP IO-Extender serial card in Linux, say Y.
  529.       Otherwise, say N.
  530.  
  531. config GVPIOEXT_LP
  532.     tristate "GVP IO-Extender parallel printer support"
  533.     depends on GVPIOEXT
  534.     help
  535.       Say Y to enable driving a printer from the parallel port on your
  536.       GVP IO-Extender card, N otherwise.
  537.  
  538. config GVPIOEXT_PLIP
  539.     tristate "GVP IO-Extender PLIP support"
  540.     depends on GVPIOEXT
  541.     help
  542.       Say Y to enable doing IP over the parallel port on your GVP
  543.       IO-Extender card, N otherwise.
  544.  
  545. config MAC_SCC
  546.     tristate "Macintosh serial support"
  547.     depends on MAC
  548.  
  549. config MAC_HID
  550.     bool
  551.     depends on INPUT_ADBHID
  552.     default y
  553.  
  554. config MAC_ADBKEYCODES
  555.     bool "Support for ADB raw keycodes"
  556.     depends on INPUT_ADBHID
  557.     help
  558.       This provides support for sending raw ADB keycodes to console
  559.       devices.  This is the default up to 2.4.0, but in future this may be
  560.       phased out in favor of generic Linux keycodes.  If you say Y here,
  561.       you can dynamically switch via the
  562.       /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
  563.       sysctl and with the "keyboard_sends_linux_keycodes=" kernel
  564.       argument.
  565.  
  566.       If unsure, say Y here.
  567.  
  568. config ADB_KEYBOARD
  569.     bool "Support for ADB keyboard (old driver)"
  570.     depends on MAC && !INPUT_ADBHID
  571.     help
  572.       This option allows you to use an ADB keyboard attached to your
  573.       machine. Note that this disables any other (ie. PS/2) keyboard
  574.       support, even if your machine is physically capable of using both at
  575.       the same time.
  576.  
  577.       If you use an ADB keyboard (4 pin connector), say Y here.
  578.       If you use a PS/2 keyboard (6 pin connector), say N here.
  579.  
  580. config HPDCA
  581.     tristate "HP DCA serial support"
  582.     depends on DIO && SERIAL_8250
  583.     help
  584.       If you want to use the internal "DCA" serial ports on an HP300
  585.       machine, say Y here.
  586.  
  587. config HPAPCI
  588.     tristate "HP APCI serial support"
  589.     depends on HP300 && SERIAL_8250 && EXPERIMENTAL
  590.     help
  591.       If you want to use the internal "APCI" serial ports on an HP400
  592.       machine, say Y here.
  593.  
  594. config MVME147_SCC
  595.     bool "SCC support for MVME147 serial ports"
  596.     depends on MVME147
  597.     help
  598.       This is the driver for the serial ports on the Motorola MVME147
  599.       boards.  Everyone using one of these boards should say Y here.
  600.  
  601. config SERIAL167
  602.     bool "CD2401 support for MVME166/7 serial ports"
  603.     depends on MVME16x && BROKEN
  604.     help
  605.       This is the driver for the serial ports on the Motorola MVME166,
  606.       167, and 172 boards.  Everyone using one of these boards should say
  607.       Y here.
  608.  
  609. config MVME162_SCC
  610.     bool "SCC support for MVME162 serial ports"
  611.     depends on MVME16x
  612.     help
  613.       This is the driver for the serial ports on the Motorola MVME162 and
  614.       172 boards.  Everyone using one of these boards should say Y here.
  615.  
  616. config BVME6000_SCC
  617.     bool "SCC support for BVME6000 serial ports"
  618.     depends on BVME6000
  619.     help
  620.       This is the driver for the serial ports on the BVME4000 and BVME6000
  621.       boards from BVM Ltd.  Everyone using one of these boards should say
  622.       Y here.
  623.  
  624. config DN_SERIAL
  625.     bool "Support for DN serial port (dummy)"
  626.     depends on APOLLO
  627.  
  628. config SERIAL_CONSOLE
  629.     bool "Support for serial port console"
  630.     depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
  631.     ---help---
  632.       If you say Y here, it will be possible to use a serial port as the
  633.       system console (the system console is the device which receives all
  634.       kernel messages and warnings and which allows logins in single user
  635.       mode). This could be useful if some terminal or printer is connected
  636.       to that serial port.
  637.  
  638.       Even if you say Y here, the currently visible virtual console
  639.       (/dev/tty0) will still be used as the system console by default, but
  640.       you can alter that using a kernel command line option such as
  641.       "console=ttyS1". (Try "man bootparam" or see the documentation of
  642.       your boot loader (lilo or loadlin) about how to pass options to the
  643.       kernel at boot time.)
  644.  
  645.       If you don't have a VGA card installed and you say Y here, the
  646.       kernel will automatically use the first serial line, /dev/ttyS0, as
  647.       system console.
  648.  
  649.       If unsure, say N.
  650.  
  651. endmenu
  652.  
  653. source "fs/Kconfig"
  654.  
  655. source "arch/m68k/Kconfig.debug"
  656.  
  657. source "security/Kconfig"
  658.  
  659. source "crypto/Kconfig"
  660.  
  661. source "lib/Kconfig"
  662.  
  663.  
  664.