home *** CD-ROM | disk | FTP | other *** search
INI File | 1995-10-12 | 9.5 KB | 412 lines |
- [TITLE]
- MAINTITLE=Magic S23 Setup
- README=README.TXT
-
- [MSGSTATUS]
- STATUS=NOTE: Read the message carefully.
-
- [STATUS]
- MSGBOX=NOTE: Read the message carefully.
- README=<UP>,<DOWN>,<PGUP>,<PGDN>:Scroll; <ESC>:Leave
- TITLE=Press any key...
- HWSETTING=<UP>,<DOWN>:Choose; <ENTER>:Change; <ESC>:Cancel; <F3>:Exit
- HWSETTINGWIN=<UP>,<DOWN>:Choose; <ENTER>:Change; <B>:Back; <ESC>:Cancel; <F3>:Exit
- LISTBOX=<UP>,<DOWN>:Move selection; <ENTER>:Choose; <ESC>:Cancel
- GETSTR=<EDIT KEYS>:Move cursor; <ESC>:Cancel; <ENTER>:Accept
- CHOOSE1=<UP>,<DOWN>,<TAB>:Move selection; <Enter>:Choose; <F3>:Exit; <ESC>:Cancel
- COPYFILE=Copying necessary files to your hard disk...
- CONFIRMPATH=<UP>,<DOWN>,<TAB>:Move selection; <Enter>:Make change; <ESC>:Cancel
- MODIFY=Modifying system files......
-
- [FAILUNINSTALL]
- CAP=Uninstallation Fail
- MSG=Fail to uninstall S23 software.
-
- [NOTINSTALLED]
- CAP=Not Installed
- MSG=You have not installed S23 software before. Or
- MSG=S23 data files in your destination directory
- MSG=have been corrupted. You should install S23
- MSG=software all over again.
-
- [IRQCONFLICT]
- CAP=Interrupt Conflict
- MSG=Interrupt for MPU-401 cannot be the same as
- MSG=Digital Audio Interrupt. Please change the
- MSG=settings accordingly.
-
- [DMACONFLICT]
- CAP=DMA Channel Conflict
- MSG=If you select "Full Duplex" or "Enhanced Full Duplex"
- MSG=mode, the Digital Audio Recording DMA Channel cannot
- MSG=be the same as the Digital Audio Main DMA Channel.
- MSG=Please change the settings accordingly.
-
- [HWSNOTCOMPLETE]
- CAP=Exit Setup
- MSG=Hardware Settings of S23 card is not completed.
- MSG=Are you sure you want to exit setup now?
-
- [WAITING]
- WAITHW=Reading data, please wait...
- WAITCP=Reading data, please wait...
- WRITE=Writing data, please wait...
- MODIFY=Reading data, please wait...
- CONFIGURE=Reading data, please wait...
-
- [HWSERROR]
- CAP=Hardware Configuration Error
- MSG=Error occured during the process of
- MSG=hardware configuration.
-
- [SETUPEXIT]
- CAP=Exit S23 Setup
- MSG=If you have not yet completed the installation of
- MSG=S23 software, the sound card cannot work properly.
- MSG=Are you sure you want to exit Setup now?
-
- [SETUPCOMPLETE]
- CAP=Setup Completed
- MSG=The setup of Magic S23 card is completed.
- MSG=The original profiles:
- MSG=
- MSG= <&1>
- MSG= <&2>
- MSG=
- MSG=are copied to
- MSG=
- MSG= <&3>
- MSG= <&4>
- MSG=
- MSG=in the directory: <&5>.
-
- [REBOOT]
- MSG=*******************************************
- MSG=* You should REBOOT your system for the *
- MSG=* settings to take effect. *
- MSG=* *
- MSG=* Please press CTRL-ALT-DEL now... *
- MSG=*******************************************
-
- [UNINSTALLCOMPLETE]
- CAP=Uninstall Completed
- MSG=Uninstallation process of S23 software is completed.
- MSG=The original system profiles before uninstallation:
- MSG=
- MSG=<&1>
- MSG=<&2>
- MSG=
- MSG=are copied to
- MSG=
- MSG=<&3>
- MSG=<&4>
- MSG=
- MSG=in the directory: <&5>.
-
- [UNINSTALLABORT]
- CAP=Uninstallation Aborted
- MSG=Uninstallation process of S23 card is aborted.
-
- [CONFIGCOMPLETE]
- CAP=Hardware Configuration Completed
- MSG=Hardware settings for your S23 card
- MSG=have been successfully modified.
- MSG
- MSG=You should reboot your system for
- MSG=the settings to take effect.
-
- [INVALIDPATH]
- CAP=Invalid Path
- MSG=<&1> is not a valid path.
-
- [INVALIDSETUP]
- CAP=Invalid Setup Path
- MSG=Cannot find SETUP.EXE.
- MSG=<&1> is not a valid setup path.
-
- [PATHEXIST]
- CAP=Path Already Exists
- MSG=The path "<&1>" already exists.
- MSG=Do you want to install the software into
- MSG=the specified path?
-
- [CANNOTCREATE]
- CAP=Fail Create Path
- MSG=Unable to create the directory: <&1>.
-
- [NOSETUPINF]
- CAP=No SETUP.INF
- MSG=Cannot find SETUP.INF in this path.
-
- [PATHNOTEXIST]
- CAP=Path Not Exist
- MSG=The path <&1> doest not exist.
-
- [NOTWINPATH]
- CAP=Incorrect Windows Directory
- MSG=The path <&1> is not a correct Windows directory.
-
- [ASKWIN]
- CAP=Install Windows Utilities and Drivers
- MSG=Do you want to install S23 Windows utilities and drivers?
-
- [CONFIRMPATH1]
- CAP=Confirm Paths
- MSG=Source Path: <&1>
- MSG=Destination Path: <&2>
- MSG=Windows Path: <&3>
- MSG
- MSG=Are these paths correct?
-
- [CONFIRMPATH2]
- CAP=Confirm Paths
- MSG=Source Path: <&1>
- MSG=Destination Path: <&2>
- MSG=Are these paths correct?
-
- [HDNOTENOUGH]
- CAP=Insufficient Space
- MSG=The free space of the specified hard disk
- MSG=is insufficient.
- MSG=Please retry with another path.
-
- [CANTBACKUP]
- CAP=Fail Backup Profiles
- MSG=Fail to backup system profiles.
-
- [INSTDOSERR]
- CAP=Fail Install DOS Drivers
- MSG=Some error occurred during installing DOS drivers.
- MSG=Please retry the installation procedure.
-
- [INSTWINERR]
- CAP=Fail Install Windows Drivers
- MSG=Some error occurred during installing Windows
- MSG=drivers and utilities.
- MSG=Please retry the installation procedure.
-
- [CANTLOG]
- CAP=Fail Write Installation Log
- MSG=Cannot write the installation log file.
- MSG=Please retry the installation procedure.
-
- [CANTWRITEPAR]
- CAP=Fail Write SETUP.INF
- MSG=Cannot write information to SETUP.INF.
-
- [CANTMDFDOS]
- CAP=Fail Modify Profiles
- MSG=Cannot modify DOS profiles.
-
- [CANTMDFWIN]
- CAP=Fail Modify Profiles
- MSG=Cannot modify Windows profiles.
-
- [HWSERR]
- CAP=Hardware Configuration Error
- MSG=Some error occurred during the process of
- MSG=hardware configuration.
- MSG=Please retry the installation procedure.
-
- [FAILESSENTIAL]
- CAP=Fail Copy Essential Files
- MSG=Fail to copy essential files to the
- MSG=destination directory.
-
- [FAILCOPY]
- CAP=Fail Copy Files
- MSG=Error occurred during copying files.
-
- [OVERWRITE]
- CAP=Destination File Exists
- MSG=Replace File: <&1>
- MSG= <&2>
- MSG= <&3> bytes
- MSG=
- MSG=With File : <&4>
- MSG= <&5>
- MSG= <&6> bytes
- MSG=
- MSG=Do you want to overwrite the original file?
-
- [INPUTBOX]
- SOURCEDIR=Source directory
- DESTDIR=Destination directory
- WINDIR=Windows directory
-
- [REQUIRESETUPINF]
- CAP=SETUP.INF Required
- MSG=Cannot find SETUP.INF.
- MSG=Please input the location of SETUP.INF.
-
- [PROMPTDISK]
- CAP=Copy Files
- MSG=
- MSG=Please insert the diskette:
- MSG=<&1>
- MSG=for the file <&2>. Or input the path
- MSG=where the file is located.
-
- [CANTFINDFILE]
- CAP=File Not Found
- MSG=Cannot find <&1> in the directory:
- MSG=<&2>
-
- [MSGBOXPROMPT]
- PROM=OK
- PROM=Cancel
- PROM=OK
- PROM=Abort
- PROM=Retry
- PROM=Ignore
- PROM=Yes
- PROM=No
-
- [CONFIRMINSTALL]
- MSG=CONFIG.SYS and AUTOEXEC.BAT will be modified during
- MSG=the installation process.
- MSG=
- MSG=If you choose to install Windows utilities and drivers,
- MSG=then SYSTEM.INI and WIN.INI will be modified too.
- MSG=
- MSG=Setup program will backup those files in the destination
- MSG=directory and rename them with the extension ".###".
- MSG=For example, CONFIG.SYS will be renamed as CONFIG.###.
- MSG=
- MSG=Do you want to proceed the installation?
-
- [CONFIRMUNINSTALL]
- CAP=Confirm Uninstallation
- MSG=Setup program is going to remove all entries in system
- MSG=files which invoke S23 card software and drivers. After
- MSG=the uninstallation procedure those software and drivers
- MSG=will be no longer valid.
- MSG=Are you sure you want to proceed?
-
- [REMOVEFILE]
- CAP=Remove Files
- MSG=Do you want to delete the files of the
- MSG=S23 card software and drivers?
-
- [UNINSTFAILBACKUP]
- CAP=Fail Backup Profiles
- MSG=The current profiles of your system cannot be safely
- MSG=backup. You may want to backup them before starting
- MSG=the uninstallation process.
- MSG=Do you want to proceed anyway?
-
- [CANTCD]
- CAP=Fail Change Directory
- MSG=Cannot change to the directory: <&1>.
-
- [BACKUPERR]
- CAP=Fail Backup Profiles
- MSG=Unable to backup profile: <&1>
- MSG=You may need to backup the file manually
- MSG=before running setup.
-
- [QUERYREBOOT]
- CAP=Reboot System
- MSG=Do you want to reboot the system now?
-
- [REMOVEDISK]
- CAP=Remove Diskette
- MSG=Please remove the diskette in the floppy drive.
-
- [NOREADME]
- CAP=README.TXT Not Found
- MSG=Cannot find README.TXT in the source directory.
-
- [PARSEERR]
- CAP=SETUP.INF Parse Error
- MSG=Parse error in SETUP.INF.
- MSG=<&1>
-
- [EXTRAQUOTE]
- CAP=Extract Parameter Error
- MSG=Extra or missing quote.
-
- [NOVARS]
- CAP=Cannot Find VARS
- MSG=Can't find variable <&1> in <&2>.
-
- [RESTOREERR]
- CAP=Fail Restore Profiles
- MSG=Unable to restore the profile: <&1>
- MSG=You should manually restore it from: <&2>
-
- [FAILMDFPROFILE]
- CAP=Fail Modify Profiles
- MSG=Fail to modify system profiles.
-
- [PROGRESSMSG]
- PROGMSG=Setup is modifying
-
- [NOTVALIDSETUPDIR]
- CAP=Invalid Source Directory
- MSG=Cannot find nessary files in the directory:
- MSG=<&1>. It is not a valid source directory.
- MSG=Please enter the correct path again.
-
- [COPYFILE]
- MSG= Setup is copying files...
- MSG=
- MSG= From :
- MSG= To :
-
- [WINTOBEINSTALLED]
- CAP=Install Windows Drivers & Utilities
- MSG=Setup has detected that you have Magic S23 Windows
- MSG=drivers and utilities installed in the previous
- MSG=installation procedure. Setup is going to install
- MSG=the same software to your Windows directory:
- MSG=<&1>.
- MSG=
- MSG=Select OK to proceed, CANCEL to abort the currect
- MSG=installation procedure.
-
- [PNPINSTALLED]
- CAP=Plug and Play Detected
- MSG=The Plug and Play Configuration Manager is
- MSG=detected on your system. The hardware settings
- MSG=will be automatically configured by the
- MSG=Configuration Manager on the next starting up of
- MSG=your system.
-
- [BORDER]
- TL=218
- TR=191
- BL=192
- BR=217
- VER=179
- HOR=196
- CL=180
- CR=195
-
- [BORDERJ]
- TL=1
- TR=2
- BL=3
- BR=4
- VER=5
- HOR=6
- CL=23
- CR=50
-
- [SHADOW]
- SL=220
- SB=223
-
- [SHADOWJ]
- SL=0
- SB=0
-
- [COPYINDICATOR]
- FILL=219
-
- [COPYINDICATORJ]
- FILL=20
-
- [MJ20CHECK]
- PRODUCT=MAGICS23
-