home *** CD-ROM | disk | FTP | other *** search
- # This file is a shell script that supplies the information necessary
- # to tailor a template configure script into the configure script
- # appropriate for this directory. For more information, check any
- # existing configure script.
-
- configdirs="doc"
- srctrigger=libbfd.c
- srcname="BFD"
- target_dependent=true
-
- # per-host:
-
- . ${srcdir}/configure.host
-
- # Set up to make a link between the host's include file and "sysdep.h".
- files="hosts/${my_host}.h"
- links="sysdep.h"
-
- if [ ! -f ${srcdir}/${files} ] ; then
- files=../bfd/hosts/std-host.h
- echo "[${srcname} has no specific support for host ${host} -- using std-host]"
- fi
-
- host_makefile_frag=
- if [ -f ${srcdir}/config/${my_host}.mh ] ; then
- host_makefile_frag=config/${my_host}.mh
- fi
-
- # per-target:
-
- # WHEN ADDING ENTRIES TO THIS MATRIX:
- # Make sure that the left side always has two dashes. Otherwise you
- # can get spurious matches. Even for unambiguous cases, do this as a
- # convention, else the table becomes a real mess to understand and maintain.
-
- case "${target}" in
- alpha-*-*) bfd_target=alphaosf ;;
- a29k-*-ebmon) bfd_target=a29k-coff ;;
- a29k-*-udi) bfd_target=a29k-coff ;;
- a29k-*-aout) bfd_target=a29k-aout ;;
- a29k-*-coff) bfd_target=a29k-coff ;;
- a29k-*-sym1) bfd_target=a29k-coff ;;
- h8300-*-*) bfd_target=h8300-coff ;;
- h8500-*-*) bfd_target=h8500-coff ;;
- sh-*-*) bfd_target=sh-coff ;;
- hppa*-*-bsd*) bfd_target=hppabsd ;;
- hppa*-*-hpux*) bfd_target=hppahpux ;;
- hppa*-*-osf) bfd_target=hppa-elf ;;
- i[34]86-*-sysv4*) bfd_target=i386-elf ;;
- i[34]86-*-sysv*) bfd_target=i386-coff ;;
- i[34]86-*-isc*) bfd_target=i386-coff ;;
- i[34]86-*-sco*) bfd_target=i386-sco ;;
- i[34]86-*-bsd*) bfd_target=i386-bsd ;;
- i[34]86-*-aix*) bfd_target=i386-coff ;;
- i[34]86-*-elf) bfd_target=i386-elf ;;
- i[34]86-*-linux*) bfd_target=i386-linux ;;
- i[34]86-none-*) bfd_target=i386-coff ;;
- i960-*-vxworks) bfd_target=i960-bout ;;
- i960-*-aout) bfd_target=i960-bout ;;
- i960-*-bout) bfd_target=i960-bout ;;
- m68*-hp-bsd*) bfd_target=hp300bsd ;;
- m68*-*-aout) bfd_target=m68k-aout ;;
- m68*-*-coff) bfd_target=m68k-coff ;;
- m68*-*-hpux*) bfd_target=hp300hpux ;;
- m68*-*-os68k) bfd_target=m68k-aout ;;
- m68*-*-sunos*) bfd_target=m68k-aout ;;
- m68*-*-vxworks*) bfd_target=m68k-aout ;;
- m68*-ericsson-*) bfd_target=m68k-aout ;;
- m68*-netx-*) bfd_target=m68k-aout ;;
- m88k-*-*) bfd_target=m88k-coff ;;
- mips-big-*) bfd_target=bigmips ;;
- mips-dec-bsd*) bfd_target=mipsdecbsd ;;
- mips-dec-*) bfd_target=decstation ;;
- mips-*-ecoff) bfd_target=bigmips ;;
- mips-sgi-*) bfd_target=bigmips ;;
- rs6000-*-*) bfd_target=rs6000 ;;
- sparc-*-solaris2*) bfd_target=sparc-elf ;;
- sparc-*-sysv4*) bfd_target=sparc-elf ;;
- sparc*-*-*) bfd_target=sparc-aout ;;
- tahoe-*-*) bfd_target=tahoe ;;
- vax-*-vms) bfd_target=vax-vms ;;
- vax-*-*) bfd_target=vax ;;
- we32k-*-*) bfd_target=we32k ;;
- z8k*-*-*) bfd_target=z8k-coff ;;
-
- *-*-aout) bfd_target=${target_cpu}-aout ;;
- *-*-bsd*) bfd_target=${target_cpu}-aout ;;
- *-*-sysv4*) bfd_target=${target_cpu}-elf ;;
- *-*-solaris2*) bfd_target=${target_cpu}-elf ;;
- *-*-go32) bfd_target=${target_cpu}-aout ;;
- *-*-sysv*) bfd_target=${target_cpu}-coff ;;
-
- *-adobe-*) bfd_target=adobe ;;
- *-sony-*) bfd_target=news ;;
- *-intel-*) bfd_target=${target_cpu}-coff ;;
- *-stratus-*) bfd_target=${target_cpu}-elf ;;
- *-cbm-*) bfd_target=${target_cpu}-elf ;;
- *-ncr-*) bfd_target=${target_cpu}-elf ;;
- *-tandem-*) bfd_target=st2000 ;;
- esac
-
- if [ ! -f ${srcdir}/config/${bfd_target}.mt ] ; then
- if [ -n "${bfd_target}" ] ; then
- echo '***' No file ${srcdir}/config/${bfd_target}.mt 1>&2
- fi
- echo '***' BFD does not support target ${target} 1>&2
- echo '***' Look in bfd/configure.in for supported targets 1>&2
- exit 1
- fi
- target_makefile_frag=config/${bfd_target}.mt
-
- # We don't do any links based on the target system, just very minor makefile
- # config.
-
- # post-target:
-
- case ${with_minimal_bfd} in
- yes)
- echo MINIMIZE=1 >> Makefile
- ;;
- no | "")
- ;;
- *)
- echo "*** bad value \"${with_minimal_bfd}\" for minimal-bfd flag; ignored" 1>&2
- ;;
- esac
-