home *** CD-ROM | disk | FTP | other *** search
- White Box Plans by the Jolly Roger
-
- Introduction:
- ------------
- The White Box is simply a portable Touch-Tone keypad. For more
- information on Touch-Tone, see my Silver Box Plans.
- Materials:
- ---------
- 1 Touch-Tone Keypad
- 1 Miniature 1000 to 8 Ohm Transformer
- (Radio Shack # 273-1380)
- 1 Standard 8 Ohm Speaker
- 2 9V Batteries
- 2 9V Battery Clips
-
- Procedure:
- ---------
- (1) Connect the Red Wire from the Transformer to either terminal on the
- Speaker.
- (2) Connect the White Wire from the Transformer to the other terminal on
- the Speaker.
- (3) Connect the Red Wire from one Battery Clip to the Black Wire from the other
- Battery Clip.
- (4) Connect the Red Wire from the second Battery Clip to the Green Wire
- from the Keypad.
- (5) Connect the Blue Wire from the Keypad to the Orange/Black Wire from
- the Keypad.
- (6) Connect the Black Wire from the first Battery Clip to the two above
- wires (Blue and Black/Orange).
- (7) Connect the Black Wire from the Keypad to the Blue Wire from the
- Transformer.
- (8) Connect the Red/Green Wire from the Keypad to the Green Wire from the
- Transformer.
- (9) Make sure the Black Wire from the Transformer and the remaining wires
- from the Keypad are free.
- (10) Hook up the Batteries.
-
- Optional:
- --------
- (1) Put it all in a case.
- (2) Add a Silver Box to it.
-
- Use:
- ---
- Just use it like a normal keypad, except put the speaker next to the
- receiver of the phone you're using.
-
- ---------------------Jolly Roger
-
-
- Downloaded From P-80 International Information Systems 304-744-2253
-