home *** CD-ROM | disk | FTP | other *** search
- Carbon-Tet Explosive by the Jolly Roger
-
- A moist explosive mixture can be made from fine aluminum powder combined
- with carbon tetrachloride or tetrachloroethylene. This explosive can be
- detonated with a blasting cap.
-
- Material Required Source
- ----------------- ------
- Fine aluminum bronzing powder Paint store
- Carbon Tetrachloride Pharmacy, or fire
- or extinguisher fluid
- tetrachloroethylene Dry cleaners, pharmacy
- Stirring rod (wood)
- Mixing container (bowl, bucket, etc.)
- Measuring container (cup, tablespoon, etc.)
- Storage container (jar, can, etc.)
- Blasting cap
- Pipe, can or jar
-
- Procedure:
- ---------
-
- 1) Measure out two parts aluminum powder to one part carbon tetrachloride or
- tetrachlorethylene liquid into mixing container, adding liquid to powder
- while stirring with the wooden rod.
- 2) Stir until the mixture becomes the consistency of honey syrup.
-
- CAUTION: Fumes from the liquid are dangerous and should not be inhaled.
-
- 3) Store explosive in a jar or similar water proof container until ready to
- use. The liquid in the mixture evaporates quicky when not confined.
-
- NOTE: Mixture will detonate in this manner for a period of 72 hours.
-
- How to Use:
- ----------
-
- 1) Pour this mixture into an iron or steel pipe which has an end cap threaded
- on one end. If a pipe is not available, you may use a dry tin can or glass
- jar.
- 2) Insert blasting cap just beneath the surface of the explosive mix.
-
- NOTE: Confining the open end of the container will add to the effectiveness
- of the explosive.
-
- ---------------Jolly Roger
-
-
- Downloaded From P-80 International Information Systems 304-744-2253
-