home *** CD-ROM | disk | FTP | other *** search
- Alien Rampage!
-
- System Requirements
- -------------------
- IBM PC and Compatibles
- 486 DX/66 processor or better
- VGA Compatible Display or better
- 8MB RAM minimum, 16MB recommended
- CD-ROM drive Required
- MS-DOS 5.0 or better or Windows 95 (does NOT run under Windows NT)
- Hard Drive (11MB for Shareware, 15MB for registered.)
-
-
- ========================================================================
- Here are the files needed for the shareware release of Alien Rampage:
-
- README.TXT
- TECHINFO.TXT
- SLICNSE.TXT
- ORDER.TXT
- RAMPAGE.EXE
- RAMPAGE.GOO
- MAPS.CMP
- ACTORS.TNK
- DEMO11.DAT
- DEMO12.DAT
- DEMO13.DAT
- INFO.GLU
- BOW_ANM.ICC
- WINA_ANM.ICC
- TITL_ANM.ICC
- FILE_ID.DIZ
-
-
- Running Alien Rampage
- ---------------------
- DOS: To launch Alien Rampage from the DOS Prompt, go to the directory
- where you installed Rampage and simply type:
-
- RAMPAGE
-
- then press <ENTER>.
-
-
- Windows 3+: Exit Windows completely - don't run it in a Window or from
- the Windows MS-DOS prompt, then follow the DOS instructions above.
-
-
- Windows 95: To launch Alien Rampage, double-click on the file RAMPAGE.EXE
- from Windows Explorer. Depending on your system configuration, this may be
- all you need to do to start Rampaging!
-
- However, certain systems may experience difficulties running Alien Rampage
- this way. In this case, you can either reboot in MS-DOS mode, or make the
- following short-cut:
-
- 1. Using Explorer, right-click and drag the file RAMPAGE.EXE, from the
- game directory, to your desktop. Choose to Create a Shortcut from the
- pop-up menu. You will see an MS-DOS Icon titled "Shortcut to Rampage"
- appear on the desktop.
- 2. Right click on the new icon, and from the pop-up menu, choose
- "Properties". Choose the "Program" tab at the top.
- 3. Click on the "Advanced..." button near the bottom. The "Advanced
- Program Settings" window will appear.
- 4. Select the "MS-DOS mode" check box. You can leave the "Warn" box on
- or off. You should also be able to use the current configuration.
- 5. Click on "OK" and you are finished!
- 6. Double-click the desktop icon to start Rampaging!
-
-
- Audio Setup
- -----------
- The first time you run Alien Rampage, you will see the following menu:
-
- KEYBOARD
- GAMEPAD
- JOYSTICK
- SOUND
- FINISHED
-
- You MUST go into the SOUND menu to set-up your sound card! Select the
- type of sound card you have, then press "N" to the question "Modify these
- values?" and the sound card should be initialized.
-
- If initialization fails, you either have a different type of sound card,
- or will have to modify the values detected for the sound card. To find
- the values you need, look in your AUTOEXEC.BAT file for a line like this:
-
- SET BLASTER=A220 I5 D1 H5 P330 T6
-
- The "A220" is the address, "I5" is the IRQ, "D1" is the DMA channel,
- "H5" is the high DMA channel, "P330" is the port and "T6" is type of
- Sound Blaster card you are emulating.
-
- (NOTE: You may not have an "H", "P" or "T" variable in your blaster line.)
-
-
- 8 meg systems and SMRTDRV
- -------------------------
- It is very unlikely, but still possible that 8 meg systems could
- experience sporadic memory problems. If this seems to happen to you,
- check your SMARTDRV setting in your AUTOEXEC.BAT and/or CONFIG.SYS
- files and make sure it is not over 1024 (1 meg) in size.
-
-
- Technical Support
- -----------------
- If you are having trouble installing or running Alien Rampage you can get
- technical support by sending e-mailing to support@softdisk.com. You can
- also refer to our web page, www.alienrampage.com, or call 1-318-221-8311.
-
- When sending support e-mail, cut and paste the following into your e-mail
- message and fill in the blanks:
-
- Date:
- Name:
- Phone number:
- E-mail address:
- Game Title: Alien Rampage
- Version #: v1.0
- Operating system (i.e., DOS 6.0 or Windows 95):
- Computer type:
- BIOS date:
- BIOS version:
- Processor type:
- Processor speed:
- Amount of RAM:
- Video Card:
- Sound Card:
- The problem you encountered:
-
- How to reproduce the problem:
-
-